diff options
Diffstat (limited to 'src/drivers/boards/aerocore/aerocore_init.c')
| -rw-r--r-- | src/drivers/boards/aerocore/aerocore_init.c | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/src/drivers/boards/aerocore/aerocore_init.c b/src/drivers/boards/aerocore/aerocore_init.c new file mode 100644 index 000000000..4e3ba2d7e --- /dev/null +++ b/src/drivers/boards/aerocore/aerocore_init.c @@ -0,0 +1,282 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file aerocore_init.c + * + * AeroCore-specific early startup code. This file implements the + * nsh_archinitialize() function that is called early by nsh during startup. + * + * Code here is run before the rcS script is invoked; it should start required + * subsystems and perform board-specific initialisation. + */ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdbool.h> +#include <stdio.h> +#include <debug.h> +#include <errno.h> + +#include <nuttx/arch.h> +#include <nuttx/spi.h> +#include <nuttx/i2c.h> +#include <nuttx/mmcsd.h> +#include <nuttx/analog/adc.h> +#include <nuttx/gran.h> + +#include <stm32.h> +#include "board_config.h" +#include <stm32_uart.h> + +#include <arch/board/board.h> + +#include <drivers/drv_hrt.h> +#include <drivers/drv_led.h> + +#include <systemlib/cpuload.h> +#include <systemlib/perf_counter.h> + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lowsyslog(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lowsyslog +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Protected Functions + ****************************************************************************/ + +#if defined(CONFIG_FAT_DMAMEMORY) +# if !defined(CONFIG_GRAN) || !defined(CONFIG_FAT_DMAMEMORY) +# error microSD DMA support requires CONFIG_GRAN +# endif + +static GRAN_HANDLE dma_allocator; + +/* + * The DMA heap size constrains the total number of things that can be + * ready to do DMA at a time. + * + * For example, FAT DMA depends on one sector-sized buffer per filesystem plus + * one sector-sized buffer per file. + * + * We use a fundamental alignment / granule size of 64B; this is sufficient + * to guarantee alignment for the largest STM32 DMA burst (16 beats x 32bits). + */ +static uint8_t g_dma_heap[8192] __attribute__((aligned(64))); +static perf_counter_t g_dma_perf; + +static void +dma_alloc_init(void) +{ + dma_allocator = gran_initialize(g_dma_heap, + sizeof(g_dma_heap), + 7, /* 128B granule - must be > alignment (XXX bug?) */ + 6); /* 64B alignment */ + if (dma_allocator == NULL) { + message("[boot] DMA allocator setup FAILED"); + } else { + g_dma_perf = perf_alloc(PC_COUNT, "DMA allocations"); + } +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/* + * DMA-aware allocator stubs for the FAT filesystem. + */ + +__EXPORT void *fat_dma_alloc(size_t size); +__EXPORT void fat_dma_free(FAR void *memory, size_t size); + +void * +fat_dma_alloc(size_t size) +{ + perf_count(g_dma_perf); + return gran_alloc(dma_allocator, size); +} + +void +fat_dma_free(FAR void *memory, size_t size) +{ + gran_free(dma_allocator, memory, size); +} + +#else + +# define dma_alloc_init() + +#endif + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +__EXPORT void +stm32_boardinitialize(void) +{ + /* configure SPI interfaces */ + stm32_spiinitialize(); + + /* configure LEDs */ + up_ledinit(); +} + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +static struct spi_dev_s *spi3; +static struct spi_dev_s *spi4; + +#include <math.h> + +#ifdef __cplusplus +__EXPORT int matherr(struct __exception *e) +{ + return 1; +} +#else +__EXPORT int matherr(struct exception *e) +{ + return 1; +} +#endif + +__EXPORT int nsh_archinitialize(void) +{ + + /* configure ADC pins */ + stm32_configgpio(GPIO_ADC1_IN10); /* used by VBUS valid */ + stm32_configgpio(GPIO_ADC1_IN11); /* J1 breakout */ + stm32_configgpio(GPIO_ADC1_IN12); /* J1 breakout */ + stm32_configgpio(GPIO_ADC1_IN13); /* J1 breakout */ + + /* configure the high-resolution time/callout interface */ + hrt_init(); + + /* configure the DMA allocator */ + dma_alloc_init(); + + /* configure CPU load estimation */ +#ifdef CONFIG_SCHED_INSTRUMENTATION + cpuload_initialize_once(); +#endif + + /* set up the serial DMA polling */ + static struct hrt_call serial_dma_call; + struct timespec ts; + + /* + * Poll at 1ms intervals for received bytes that have not triggered + * a DMA event. + */ + ts.tv_sec = 0; + ts.tv_nsec = 1000000; + + hrt_call_every(&serial_dma_call, + ts_to_abstime(&ts), + ts_to_abstime(&ts), + (hrt_callout)stm32_serial_dma_poll, + NULL); + + /* initial LED state */ + drv_led_start(); + led_off(LED_AMBER); + + /* Configure Sensors on SPI bus #3 */ + spi3 = up_spiinitialize(3); + if (!spi3) { + message("[boot] FAILED to initialize SPI port 3\n"); + up_ledon(LED_AMBER); + return -ENODEV; + } + /* Default: 1MHz, 8 bits, Mode 3 */ + SPI_SETFREQUENCY(spi3, 10000000); + SPI_SETBITS(spi3, 8); + SPI_SETMODE(spi3, SPIDEV_MODE3); + SPI_SELECT(spi3, PX4_SPIDEV_GYRO, false); + SPI_SELECT(spi3, PX4_SPIDEV_ACCEL_MAG, false); + SPI_SELECT(spi3, PX4_SPIDEV_BARO, false); + up_udelay(20); + message("[boot] Initialized SPI port 3 (SENSORS)\n"); + + /* Configure FRAM on SPI bus #4 */ + spi4 = up_spiinitialize(4); + if (!spi4) { + message("[boot] FAILED to initialize SPI port 4\n"); + up_ledon(LED_AMBER); + return -ENODEV; + } + /* Default: ~10MHz, 8 bits, Mode 3 */ + SPI_SETFREQUENCY(spi4, 10 * 1000 * 1000); + SPI_SETBITS(spi4, 8); + SPI_SETMODE(spi4, SPIDEV_MODE0); + SPI_SELECT(spi4, SPIDEV_FLASH, false); + message("[boot] Initialized SPI port 4 (FRAM)\n"); + + return OK; +} |