diff options
Diffstat (limited to 'src/drivers/px4fmu/fmu.cpp')
-rw-r--r-- | src/drivers/px4fmu/fmu.cpp | 211 |
1 files changed, 174 insertions, 37 deletions
diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index a98b527b1..70147d56a 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -34,7 +34,7 @@ /** * @file fmu.cpp * - * Driver/configurator for the PX4 FMU multi-purpose port. + * Driver/configurator for the PX4 FMU multi-purpose port on v1 and v2 boards. */ #include <nuttx/config.h> @@ -57,9 +57,18 @@ #include <drivers/device/device.h> #include <drivers/drv_pwm_output.h> #include <drivers/drv_gpio.h> -#include <drivers/boards/px4fmu/px4fmu_internal.h> #include <drivers/drv_hrt.h> +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) +# include <drivers/boards/px4fmu/px4fmu_internal.h> +# define FMU_HAVE_PPM +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) +# include <drivers/boards/px4fmuv2/px4fmu_internal.h> +# undef FMU_HAVE_PPM +#else +# error Unrecognised FMU board. +#endif + #include <systemlib/systemlib.h> #include <systemlib/err.h> #include <systemlib/mixer/mixer.h> @@ -71,15 +80,18 @@ #include <uORB/topics/actuator_outputs.h> #include <systemlib/err.h> -#include <systemlib/ppm_decode.h> +#ifdef FMU_HAVE_PPM +# include <systemlib/ppm_decode.h> +#endif class PX4FMU : public device::CDev { public: enum Mode { + MODE_NONE, MODE_2PWM, MODE_4PWM, - MODE_NONE + MODE_6PWM, }; PX4FMU(); virtual ~PX4FMU(); @@ -146,6 +158,7 @@ private: }; const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, {GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, GPIO_USART2_CTS_1}, @@ -154,6 +167,22 @@ const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { {GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, GPIO_USART2_RX_1}, {GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, GPIO_CAN2_TX_2}, {GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, GPIO_CAN2_RX_2}, +#endif +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, + {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, + {GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, 0}, + {GPIO_GPIO3_INPUT, GPIO_GPIO3_OUTPUT, 0}, + {GPIO_GPIO4_INPUT, GPIO_GPIO4_OUTPUT, 0}, + {GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, 0}, + + {0, GPIO_VDD_5V_PERIPH_EN, 0}, + {0, GPIO_VDD_3V3_SENSORS_EN, 0}, + {GPIO_VDD_BRICK_VALID, 0, 0}, + {GPIO_VDD_SERVO_VALID, 0, 0}, + {GPIO_VDD_5V_HIPOWER_OC, 0, 0}, + {GPIO_VDD_5V_PERIPH_OC, 0, 0}, +#endif }; const unsigned PX4FMU::_ngpio = sizeof(PX4FMU::_gpio_tab) / sizeof(PX4FMU::_gpio_tab[0]); @@ -271,9 +300,36 @@ PX4FMU::set_mode(Mode mode) * are presented on the output pins. */ switch (mode) { - case MODE_2PWM: // multi-port with flow control lines as PWM - case MODE_4PWM: // multi-port as 4 PWM outs - debug("MODE_%dPWM", (mode == MODE_2PWM) ? 2 : 4); + case MODE_2PWM: // v1 multi-port with flow control lines as PWM + debug("MODE_2PWM"); + + /* default output rates */ + _pwm_default_rate = 50; + _pwm_alt_rate = 50; + _pwm_alt_rate_channels = 0; + + /* XXX magic numbers */ + up_pwm_servo_init(0x3); + set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, _pwm_alt_rate); + + break; + + case MODE_4PWM: // v1 multi-port as 4 PWM outs + debug("MODE_4PWM"); + + /* default output rates */ + _pwm_default_rate = 50; + _pwm_alt_rate = 50; + _pwm_alt_rate_channels = 0; + + /* XXX magic numbers */ + up_pwm_servo_init(0xf); + set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, _pwm_alt_rate); + + break; + + case MODE_6PWM: // v2 PWMs as 6 PWM outs + debug("MODE_6PWM"); /* default output rates */ _pwm_default_rate = 50; @@ -281,7 +337,7 @@ PX4FMU::set_mode(Mode mode) _pwm_alt_rate_channels = 0; /* XXX magic numbers */ - up_pwm_servo_init((mode == MODE_2PWM) ? 0x3 : 0xf); + up_pwm_servo_init(0x3f); set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, _pwm_alt_rate); break; @@ -399,14 +455,14 @@ PX4FMU::task_main() fds[1].fd = _t_armed; fds[1].events = POLLIN; - unsigned num_outputs = (_mode == MODE_2PWM) ? 2 : 4; - +#ifdef FMU_HAVE_PPM // rc input, published to ORB struct rc_input_values rc_in; orb_advert_t to_input_rc = 0; memset(&rc_in, 0, sizeof(rc_in)); rc_in.input_source = RC_INPUT_SOURCE_PX4FMU_PPM; +#endif log("starting"); @@ -460,6 +516,23 @@ PX4FMU::task_main() /* can we mix? */ if (_mixers != nullptr) { + unsigned num_outputs; + + switch (_mode) { + case MODE_2PWM: + num_outputs = 2; + break; + case MODE_4PWM: + num_outputs = 4; + break; + case MODE_6PWM: + num_outputs = 6; + break; + default: + num_outputs = 0; + break; + } + /* do mixing */ outputs.noutputs = _mixers->mix(&outputs.output[0], num_outputs); outputs.timestamp = hrt_absolute_time(); @@ -512,6 +585,7 @@ PX4FMU::task_main() } } +#ifdef FMU_HAVE_PPM // see if we have new PPM input data if (ppm_last_valid_decode != rc_in.timestamp) { // we have a new PPM frame. Publish it. @@ -531,6 +605,8 @@ PX4FMU::task_main() orb_publish(ORB_ID(input_rc), to_input_rc, &rc_in); } } +#endif + } ::close(_t_actuators); @@ -579,6 +655,7 @@ PX4FMU::ioctl(file *filp, int cmd, unsigned long arg) switch (_mode) { case MODE_2PWM: case MODE_4PWM: + case MODE_6PWM: ret = pwm_ioctl(filp, cmd, arg); break; @@ -623,16 +700,24 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) ret = set_pwm_rate(arg, _pwm_default_rate, _pwm_alt_rate); break; - case PWM_SERVO_SET(2): + case PWM_SERVO_SET(5): + case PWM_SERVO_SET(4): + if (_mode < MODE_6PWM) { + ret = -EINVAL; + break; + } + + /* FALLTHROUGH */ case PWM_SERVO_SET(3): - if (_mode != MODE_4PWM) { + case PWM_SERVO_SET(2): + if (_mode < MODE_4PWM) { ret = -EINVAL; break; } /* FALLTHROUGH */ - case PWM_SERVO_SET(0): case PWM_SERVO_SET(1): + case PWM_SERVO_SET(0): if (arg < 2100) { up_pwm_servo_set(cmd - PWM_SERVO_SET(0), arg); } else { @@ -641,16 +726,24 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; - case PWM_SERVO_GET(2): + case PWM_SERVO_GET(5): + case PWM_SERVO_GET(4): + if (_mode < MODE_6PWM) { + ret = -EINVAL; + break; + } + + /* FALLTHROUGH */ case PWM_SERVO_GET(3): - if (_mode != MODE_4PWM) { + case PWM_SERVO_GET(2): + if (_mode < MODE_4PWM) { ret = -EINVAL; break; } /* FALLTHROUGH */ - case PWM_SERVO_GET(0): case PWM_SERVO_GET(1): + case PWM_SERVO_GET(0): *(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0)); break; @@ -658,16 +751,26 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) case PWM_SERVO_GET_RATEGROUP(1): case PWM_SERVO_GET_RATEGROUP(2): case PWM_SERVO_GET_RATEGROUP(3): + case PWM_SERVO_GET_RATEGROUP(4): + case PWM_SERVO_GET_RATEGROUP(5): *(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0)); break; case PWM_SERVO_GET_COUNT: case MIXERIOCGETOUTPUTCOUNT: - if (_mode == MODE_4PWM) { + switch (_mode) { + case MODE_6PWM: + *(unsigned *)arg = 6; + break; + case MODE_4PWM: *(unsigned *)arg = 4; - - } else { + break; + case MODE_2PWM: *(unsigned *)arg = 2; + break; + default: + ret = -EINVAL; + break; } break; @@ -743,17 +846,17 @@ ssize_t PX4FMU::write(file *filp, const char *buffer, size_t len) { unsigned count = len / 2; - uint16_t values[4]; + uint16_t values[6]; - if (count > 4) { - // we only have 4 PWM outputs on the FMU - count = 4; + if (count > 6) { + // we have at most 6 outputs + count = 6; } // allow for misaligned values - memcpy(values, buffer, count*2); + memcpy(values, buffer, count * 2); - for (uint8_t i=0; i<count; i++) { + for (uint8_t i = 0; i < count; i++) { up_pwm_servo_set(i, values[i]); } return count * 2; @@ -763,19 +866,28 @@ void PX4FMU::gpio_reset(void) { /* - * Setup default GPIO config - all pins as GPIOs, GPIO driver chip - * to input mode. + * Setup default GPIO config - all pins as GPIOs, input if + * possible otherwise output if possible. */ - for (unsigned i = 0; i < _ngpio; i++) - stm32_configgpio(_gpio_tab[i].input); + for (unsigned i = 0; i < _ngpio; i++) { + if (_gpio_tab[i].input != 0) { + stm32_configgpio(_gpio_tab[i].input); + } else if (_gpio_tab[i].output != 0) { + stm32_configgpio(_gpio_tab[i].output); + } + } +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + /* if we have a GPIO direction control, set it to zero (input) */ stm32_gpiowrite(GPIO_GPIO_DIR, 0); stm32_configgpio(GPIO_GPIO_DIR); +#endif } void PX4FMU::gpio_set_function(uint32_t gpios, int function) { +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* * GPIOs 0 and 1 must have the same direction as they are buffered * by a shared 2-port driver. Any attempt to set either sets both. @@ -787,6 +899,7 @@ PX4FMU::gpio_set_function(uint32_t gpios, int function) if (GPIO_SET_OUTPUT == function) stm32_gpiowrite(GPIO_GPIO_DIR, 1); } +#endif /* configure selected GPIOs as required */ for (unsigned i = 0; i < _ngpio; i++) { @@ -809,9 +922,11 @@ PX4FMU::gpio_set_function(uint32_t gpios, int function) } } +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* flip buffer to input mode if required */ if ((GPIO_SET_INPUT == function) && (gpios & 3)) stm32_gpiowrite(GPIO_GPIO_DIR, 0); +#endif } void @@ -912,14 +1027,21 @@ fmu_new_mode(PortMode new_mode) /* nothing more to do here */ break; - case PORT_FULL_SERIAL: - /* set all multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; - break; - case PORT_FULL_PWM: +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* select 4-pin PWM mode */ servo_mode = PX4FMU::MODE_4PWM; +#endif +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + servo_mode = PX4FMU::MODE_6PWM; +#endif + break; + + /* mixed modes supported on v1 board only */ +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + case PORT_FULL_SERIAL: + /* set all multi-GPIOs to serial mode */ + gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; break; case PORT_GPIO_AND_SERIAL: @@ -938,6 +1060,9 @@ fmu_new_mode(PortMode new_mode) /* select 2-pin PWM mode */ servo_mode = PX4FMU::MODE_2PWM; break; +#endif + default: + return -1; } /* adjust GPIO config for serial mode(s) */ @@ -995,6 +1120,12 @@ test(void) if (ioctl(fd, PWM_SERVO_SET(3), 1600) < 0) err(1, "servo 4 set failed"); +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + if (ioctl(fd, PWM_SERVO_SET(4), 1800) < 0) err(1, "servo 5 set failed"); + + if (ioctl(fd, PWM_SERVO_SET(5), 2000) < 0) err(1, "servo 6 set failed"); +#endif + close(fd); exit(0); @@ -1053,12 +1184,13 @@ fmu_main(int argc, char *argv[]) if (!strcmp(verb, "mode_gpio")) { new_mode = PORT_FULL_GPIO; - } else if (!strcmp(verb, "mode_serial")) { - new_mode = PORT_FULL_SERIAL; - } else if (!strcmp(verb, "mode_pwm")) { new_mode = PORT_FULL_PWM; +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + } else if (!strcmp(verb, "mode_serial")) { + new_mode = PORT_FULL_SERIAL; + } else if (!strcmp(verb, "mode_gpio_serial")) { new_mode = PORT_GPIO_AND_SERIAL; @@ -1067,6 +1199,7 @@ fmu_main(int argc, char *argv[]) } else if (!strcmp(verb, "mode_pwm_gpio")) { new_mode = PORT_PWM_AND_GPIO; +#endif } /* was a new mode set? */ @@ -1088,6 +1221,10 @@ fmu_main(int argc, char *argv[]) fake(argc - 1, argv + 1); fprintf(stderr, "FMU: unrecognised command, try:\n"); +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) fprintf(stderr, " mode_gpio, mode_serial, mode_pwm, mode_gpio_serial, mode_pwm_serial, mode_pwm_gpio\n"); +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + fprintf(stderr, " mode_gpio, mode_pwm\n"); +#endif exit(1); } |