diff options
Diffstat (limited to 'src/drivers/px4io/px4io.cpp')
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 160 |
1 files changed, 138 insertions, 22 deletions
diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index dbe97a178..ed75d7680 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -61,6 +61,7 @@ #include <drivers/device/device.h> #include <drivers/drv_rc_input.h> #include <drivers/drv_pwm_output.h> +#include <drivers/drv_sbus.h> #include <drivers/drv_gpio.h> #include <drivers/drv_hrt.h> #include <drivers/drv_mixer.h> @@ -238,6 +239,7 @@ private: unsigned _update_interval; ///< Subscription interval limiting send rate bool _rc_handling_disabled; ///< If set, IO does not evaluate, but only forward the RC values unsigned _rc_chan_count; ///< Internal copy of the last seen number of RC channels + uint64_t _rc_last_valid; ///< last valid timestamp volatile int _task; ///< worker task id volatile bool _task_should_exit; ///< worker terminate flag @@ -444,7 +446,7 @@ private: * @param vservo vservo register * @param vrssi vrssi register */ - void io_handle_vservo(uint16_t vbatt, uint16_t ibatt); + void io_handle_vservo(uint16_t vservo, uint16_t vrssi); }; @@ -467,6 +469,7 @@ PX4IO::PX4IO(device::Device *interface) : _update_interval(0), _rc_handling_disabled(false), _rc_chan_count(0), + _rc_last_valid(0), _task(-1), _task_should_exit(false), _mavlink_fd(-1), @@ -1357,7 +1360,10 @@ PX4IO::io_get_status() uint16_t regs[6]; int ret; - /* get STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT in that order */ + /* get + * STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT, + * STATUS_VSERVO, STATUS_VRSSI, STATUS_PRSSI + * in that order */ ret = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS, ®s[0], sizeof(regs) / sizeof(regs[0])); if (ret != OK) @@ -1394,7 +1400,8 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) * * This should be the common case (9 channel R/C control being a reasonable upper bound). */ - input_rc.timestamp = hrt_absolute_time(); + input_rc.timestamp_publication = hrt_absolute_time(); + ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_COUNT, ®s[0], prolog + 9); if (ret != OK) @@ -1404,13 +1411,25 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) * Get the channel count any any extra channels. This is no more expensive than reading the * channel count once. */ - channel_count = regs[0]; + channel_count = regs[PX4IO_P_RAW_RC_COUNT]; if (channel_count != _rc_chan_count) perf_count(_perf_chan_count); _rc_chan_count = channel_count; + input_rc.rc_ppm_frame_length = regs[PX4IO_P_RAW_RC_DATA]; + input_rc.rssi = regs[PX4IO_P_RAW_RC_NRSSI]; + input_rc.rc_failsafe = (regs[PX4IO_P_RAW_RC_FLAGS] & PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + input_rc.rc_lost_frame_count = regs[PX4IO_P_RAW_LOST_FRAME_COUNT]; + input_rc.rc_total_frame_count = regs[PX4IO_P_RAW_FRAME_COUNT]; + + /* rc_lost has to be set before the call to this function */ + if (!input_rc.rc_lost && !input_rc.rc_failsafe) + _rc_last_valid = input_rc.timestamp_publication; + + input_rc.timestamp_last_signal = _rc_last_valid; + if (channel_count > 9) { ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_BASE + 9, ®s[prolog + 9], channel_count - 9); @@ -1427,13 +1446,12 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) int PX4IO::io_publish_raw_rc() { - /* if no raw RC, just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK)) - return OK; /* fetch values from IO */ rc_input_values rc_val; - rc_val.timestamp = hrt_absolute_time(); + + /* set the RC status flag ORDER MATTERS! */ + rc_val.rc_lost = !(_status & PX4IO_P_STATUS_FLAGS_RC_OK); int ret = io_get_raw_rc_input(rc_val); @@ -1452,13 +1470,11 @@ PX4IO::io_publish_raw_rc() } else { rc_val.input_source = RC_INPUT_SOURCE_UNKNOWN; - } - /* set RSSI */ - - if (rc_val.input_source != RC_INPUT_SOURCE_PX4IO_SBUS) { - // XXX the correct scaling needs to be validated here - rc_val.rssi = (_servorail_status.rssi_v / 3.3f) * UINT8_MAX; + /* we do not know the RC input, only publish if RC OK flag is set */ + /* if no raw RC, just don't publish */ + if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK)) + return OK; } /* lazily advertise on first publication */ @@ -1767,15 +1783,14 @@ PX4IO::print_status() printf("%u bytes free\n", io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FREEMEM)); uint16_t flags = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS); - printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + uint16_t io_status_flags = flags; + printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s\n", flags, ((flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED) ? " OUTPUTS_ARMED" : ""), ((flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) ? " SAFETY_OFF" : " SAFETY_SAFE"), ((flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) ? " OVERRIDE" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_OK) ? " RC_OK" : " RC_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RC_PPM) ? " PPM" : ""), - (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_STATUS_FLAGS_RC_DSM11))) ? " DSM10" : ""), - (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_STATUS_FLAGS_RC_DSM11)) ? " DSM11" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_SBUS) ? " SBUS" : ""), ((flags & PX4IO_P_STATUS_FLAGS_FMU_OK) ? " FMU_OK" : " FMU_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) ? " RAW_PWM_PASSTHROUGH" : ""), @@ -1834,8 +1849,17 @@ PX4IO::print_status() printf("\n"); - if ((flags & PX4IO_P_STATUS_FLAGS_RC_PPM)) { - int frame_len = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_RC_DATA); + flags = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_FLAGS); + printf("R/C flags: 0x%04x%s%s%s%s%s\n", flags, + (((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11))) ? " DSM10" : ""), + (((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11)) ? " DSM11" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_FRAME_DROP) ? " FRAME_DROP" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) ? " FAILSAFE" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_MAPPING_OK) ? " MAPPING_OK" : "") + ); + + if ((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_PPM)) { + int frame_len = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_DATA); printf("RC data (PPM frame len) %u us\n", frame_len); if ((frame_len - raw_inputs * 2000 - 3000) < 0) { @@ -1861,7 +1885,13 @@ PX4IO::print_status() printf("\n"); /* setup and state */ - printf("features 0x%04x\n", io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES)); + uint16_t features = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES); + printf("features 0x%04x%s%s%s%s\n", features, + ((features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) ? " S.BUS1_OUT" : ""), + ((features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) ? " S.BUS2_OUT" : ""), + ((features & PX4IO_P_SETUP_FEATURES_PWM_RSSI) ? " RSSI_PWM" : ""), + ((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "") + ); uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING); printf("arming 0x%04x%s%s%s%s%s%s\n", arming, @@ -2283,6 +2313,38 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg) break; + case RC_INPUT_ENABLE_RSSI_ANALOG: + + if (arg) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_ADC_RSSI); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_ADC_RSSI, 0); + } + + break; + + case RC_INPUT_ENABLE_RSSI_PWM: + + if (arg) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_PWM_RSSI); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_PWM_RSSI, 0); + } + + break; + + case SBUS_SET_PROTO_VERSION: + + if (arg == 1) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS1_OUT); + } else if (arg == 2) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS2_OUT); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT), 0); + } + + break; + default: /* not a recognized value */ ret = -ENOTTY; @@ -2656,7 +2718,7 @@ monitor(void) /* clear screen */ printf("\033[2J"); - unsigned cancels = 3; + unsigned cancels = 2; for (;;) { pollfd fds[1]; @@ -2932,6 +2994,60 @@ px4io_main(int argc, char *argv[]) if (!strcmp(argv[1], "bind")) bind(argc, argv); + if (!strcmp(argv[1], "sbus1_out")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 1); + + if (ret != 0) { + errx(ret, "S.BUS v1 failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "sbus2_out")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 2); + + if (ret != 0) { + errx(ret, "S.BUS v2 failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "rssi_analog")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_ANALOG, 1); + + if (ret != 0) { + errx(ret, "RSSI analog failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "rssi_pwm")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_PWM, 1); + + if (ret != 0) { + errx(ret, "RSSI PWM failed"); + } + + exit(0); + } + out: - errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind', 'checkcrc', 'forceupdate' or 'update'"); + errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug <level>',\n" + "'recovery', 'limit <rate>', 'current', 'bind', 'checkcrc',\n" + "'forceupdate', 'update', 'sbus1_out', 'sbus2_out', 'rssi_analog' or 'rssi_pwm'"); } |