diff options
Diffstat (limited to 'src/drivers/px4io/px4io.cpp')
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 175 |
1 files changed, 117 insertions, 58 deletions
diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index fd9eb4170..58390ba4c 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -817,6 +817,11 @@ PX4IO::init() } + /* set safety to off if circuit breaker enabled */ + if (circuit_breaker_enabled("CBRK_IO_SAFETY", CBRK_IO_SAFETY_KEY)) { + (void)io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FORCE_SAFETY_OFF, PX4IO_FORCE_SAFETY_MAGIC); + } + /* try to claim the generic PWM output device node as well - it's OK if we fail at this */ ret = register_driver(PWM_OUTPUT_DEVICE_PATH, &fops, 0666, (void *)this); @@ -1155,52 +1160,54 @@ PX4IO::io_set_arming_state() actuator_armed_s armed; ///< system armed state vehicle_control_mode_s control_mode; ///< vehicle_control_mode - orb_copy(ORB_ID(actuator_armed), _t_actuator_armed, &armed); - orb_copy(ORB_ID(vehicle_control_mode), _t_vehicle_control_mode, &control_mode); + int have_armed = orb_copy(ORB_ID(actuator_armed), _t_actuator_armed, &armed); + int have_control_mode = orb_copy(ORB_ID(vehicle_control_mode), _t_vehicle_control_mode, &control_mode); uint16_t set = 0; uint16_t clear = 0; - if (armed.armed) { - set |= PX4IO_P_SETUP_ARMING_FMU_ARMED; - - } else { - clear |= PX4IO_P_SETUP_ARMING_FMU_ARMED; - } - - if (armed.lockdown && !_lockdown_override) { - set |= PX4IO_P_SETUP_ARMING_LOCKDOWN; - } else { - clear |= PX4IO_P_SETUP_ARMING_LOCKDOWN; - } + if (have_armed == OK) { + if (armed.armed) { + set |= PX4IO_P_SETUP_ARMING_FMU_ARMED; + } else { + clear |= PX4IO_P_SETUP_ARMING_FMU_ARMED; + } - /* Do not set failsafe if circuit breaker is enabled */ - if (armed.force_failsafe && !_cb_flighttermination) { - set |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; - } else { - clear |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; - } + if (armed.lockdown && !_lockdown_override) { + set |= PX4IO_P_SETUP_ARMING_LOCKDOWN; + } else { + clear |= PX4IO_P_SETUP_ARMING_LOCKDOWN; + } - // XXX this is for future support in the commander - // but can be removed if unneeded - // if (armed.termination_failsafe) { - // set |= PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE; - // } else { - // clear |= PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE; - // } + /* Do not set failsafe if circuit breaker is enabled */ + if (armed.force_failsafe && !_cb_flighttermination) { + set |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; + } else { + clear |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; + } - if (armed.ready_to_arm) { - set |= PX4IO_P_SETUP_ARMING_IO_ARM_OK; + // XXX this is for future support in the commander + // but can be removed if unneeded + // if (armed.termination_failsafe) { + // set |= PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE; + // } else { + // clear |= PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE; + // } - } else { - clear |= PX4IO_P_SETUP_ARMING_IO_ARM_OK; + if (armed.ready_to_arm) { + set |= PX4IO_P_SETUP_ARMING_IO_ARM_OK; + + } else { + clear |= PX4IO_P_SETUP_ARMING_IO_ARM_OK; + } } - if (control_mode.flag_external_manual_override_ok) { - set |= PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK; - - } else { - clear |= PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK; + if (have_control_mode == OK) { + if (control_mode.flag_external_manual_override_ok) { + set |= PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK; + } else { + clear |= PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK; + } } return io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, clear, set); @@ -1245,34 +1252,40 @@ PX4IO::io_set_rc_config() * for compatibility reasons with existing * autopilots / GCS'. */ - param_get(param_find("RC_MAP_ROLL"), &ichan); - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + /* ROLL */ + param_get(param_find("RC_MAP_ROLL"), &ichan); + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 0; + } + /* PITCH */ param_get(param_find("RC_MAP_PITCH"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 1; + } + /* YAW */ param_get(param_find("RC_MAP_YAW"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 2; + } + /* THROTTLE */ param_get(param_find("RC_MAP_THROTTLE"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 3; + } + /* FLAPS */ param_get(param_find("RC_MAP_FLAPS"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 4; + } + /* MAIN MODE SWITCH */ param_get(param_find("RC_MAP_MODE_SW"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) { + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { /* use out of normal bounds index to indicate special channel */ input_map[ichan - 1] = PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH; } @@ -1651,10 +1664,6 @@ PX4IO::io_publish_raw_rc() int PX4IO::io_publish_pwm_outputs() { - /* if no FMU comms(!) just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_FMU_OK)) - return OK; - /* data we are going to fetch */ actuator_outputs_s outputs; outputs.timestamp = hrt_absolute_time(); @@ -2055,7 +2064,7 @@ PX4IO::print_status(bool extended_status) ((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "") ); uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING); - printf("arming 0x%04x%s%s%s%s%s%s%s%s\n", + printf("arming 0x%04x%s%s%s%s%s%s%s%s%s%s\n", arming, ((arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) ? " FMU_ARMED" : " FMU_DISARMED"), ((arming & PX4IO_P_SETUP_ARMING_IO_ARM_OK) ? " IO_ARM_OK" : " IO_ARM_DENIED"), @@ -2065,7 +2074,8 @@ PX4IO::print_status(bool extended_status) ((arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) ? " ALWAYS_PWM_ENABLE" : ""), ((arming & PX4IO_P_SETUP_ARMING_LOCKDOWN) ? " LOCKDOWN" : ""), ((arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) ? " FORCE_FAILSAFE" : ""), - ((arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) ? " TERM_FAILSAFE" : "") + ((arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) ? " TERM_FAILSAFE" : ""), + ((arming & PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) ? " OVERRIDE_IMMEDIATE" : "") ); #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 printf("rates 0x%04x default %u alt %u relays 0x%04x\n", @@ -2190,7 +2200,7 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) struct pwm_output_values* pwm = (struct pwm_output_values*)arg; if (pwm->channel_count > _max_actuators) /* fail with error */ - return E2BIG; + return -E2BIG; /* copy values to registers in IO */ ret = io_reg_set(PX4IO_PAGE_FAILSAFE_PWM, 0, pwm->values, pwm->channel_count); @@ -2209,7 +2219,7 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) struct pwm_output_values* pwm = (struct pwm_output_values*)arg; if (pwm->channel_count > _max_actuators) /* fail with error */ - return E2BIG; + return -E2BIG; /* copy values to registers in IO */ ret = io_reg_set(PX4IO_PAGE_DISARMED_PWM, 0, pwm->values, pwm->channel_count); @@ -2228,7 +2238,7 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) struct pwm_output_values* pwm = (struct pwm_output_values*)arg; if (pwm->channel_count > _max_actuators) /* fail with error */ - return E2BIG; + return -E2BIG; /* copy values to registers in IO */ ret = io_reg_set(PX4IO_PAGE_CONTROL_MIN_PWM, 0, pwm->values, pwm->channel_count); @@ -2247,7 +2257,7 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) struct pwm_output_values* pwm = (struct pwm_output_values*)arg; if (pwm->channel_count > _max_actuators) /* fail with error */ - return E2BIG; + return -E2BIG; /* copy values to registers in IO */ ret = io_reg_set(PX4IO_PAGE_CONTROL_MAX_PWM, 0, pwm->values, pwm->channel_count); @@ -2305,6 +2315,19 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) } break; + case PWM_SERVO_SET_OVERRIDE_IMMEDIATE: + /* control whether override on FMU failure is + immediate or waits for override threshold on mode + switch */ + if (arg == 0) { + /* clear override immediate flag */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE, 0); + } else { + /* set override immediate flag */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE); + } + break; + case DSM_BIND_START: /* only allow DSM2, DSM-X and DSM-X with more than 7 channels */ @@ -2566,6 +2589,42 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) break; + case PWM_SERVO_SET_RC_CONFIG: { + /* enable setting of RC configuration without relying + on param_get() + */ + struct pwm_output_rc_config* config = (struct pwm_output_rc_config*)arg; + if (config->channel >= RC_INPUT_MAX_CHANNELS) { + /* fail with error */ + return -E2BIG; + } + + /* copy values to registers in IO */ + uint16_t regs[PX4IO_P_RC_CONFIG_STRIDE]; + uint16_t offset = config->channel * PX4IO_P_RC_CONFIG_STRIDE; + regs[PX4IO_P_RC_CONFIG_MIN] = config->rc_min; + regs[PX4IO_P_RC_CONFIG_CENTER] = config->rc_trim; + regs[PX4IO_P_RC_CONFIG_MAX] = config->rc_max; + regs[PX4IO_P_RC_CONFIG_DEADZONE] = config->rc_dz; + regs[PX4IO_P_RC_CONFIG_ASSIGNMENT] = config->rc_assignment; + regs[PX4IO_P_RC_CONFIG_OPTIONS] = PX4IO_P_RC_CONFIG_OPTIONS_ENABLED; + if (config->rc_reverse) { + regs[PX4IO_P_RC_CONFIG_OPTIONS] |= PX4IO_P_RC_CONFIG_OPTIONS_REVERSE; + } + ret = io_reg_set(PX4IO_PAGE_RC_CONFIG, offset, regs, PX4IO_P_RC_CONFIG_STRIDE); + break; + } + + case PWM_SERVO_SET_OVERRIDE_OK: + /* set the 'OVERRIDE OK' bit */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK); + break; + + case PWM_SERVO_CLEAR_OVERRIDE_OK: + /* clear the 'OVERRIDE OK' bit */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK, 0); + break; + default: /* see if the parent class can make any use of it */ ret = CDev::ioctl(filep, cmd, arg); |