diff options
Diffstat (limited to 'src/drivers/stm32/adc/adc.cpp')
-rw-r--r-- | src/drivers/stm32/adc/adc.cpp | 55 |
1 files changed, 52 insertions, 3 deletions
diff --git a/src/drivers/stm32/adc/adc.cpp b/src/drivers/stm32/adc/adc.cpp index 00e46d6b8..aa0dca60c 100644 --- a/src/drivers/stm32/adc/adc.cpp +++ b/src/drivers/stm32/adc/adc.cpp @@ -41,6 +41,7 @@ */ #include <nuttx/config.h> +#include <board_config.h> #include <drivers/device/device.h> #include <sys/types.h> @@ -64,6 +65,8 @@ #include <systemlib/err.h> #include <systemlib/perf_counter.h> +#include <uORB/topics/system_power.h> + /* * Register accessors. * For now, no reason not to just use ADC1. @@ -119,6 +122,8 @@ private: unsigned _channel_count; adc_msg_s *_samples; /**< sample buffer */ + orb_advert_t _to_system_power; + /** work trampoline */ static void _tick_trampoline(void *arg); @@ -134,13 +139,16 @@ private: */ uint16_t _sample(unsigned channel); + // update system_power ORB topic, only on FMUv2 + void update_system_power(void); }; ADC::ADC(uint32_t channels) : CDev("adc", ADC_DEVICE_PATH), - _sample_perf(perf_alloc(PC_ELAPSED, "ADC samples")), + _sample_perf(perf_alloc(PC_ELAPSED, "adc_samples")), _channel_count(0), - _samples(nullptr) + _samples(nullptr), + _to_system_power(0) { _debug_enabled = true; @@ -290,6 +298,43 @@ ADC::_tick() /* scan the channel set and sample each */ for (unsigned i = 0; i < _channel_count; i++) _samples[i].am_data = _sample(_samples[i].am_channel); + update_system_power(); +} + +void +ADC::update_system_power(void) +{ +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 + system_power_s system_power; + system_power.timestamp = hrt_absolute_time(); + + system_power.voltage5V_v = 0; + for (unsigned i = 0; i < _channel_count; i++) { + if (_samples[i].am_channel == 4) { + // it is 2:1 scaled + system_power.voltage5V_v = _samples[i].am_data * (6.6f / 4096); + } + } + + // these are not ADC related, but it is convenient to + // publish these to the same topic + system_power.usb_connected = stm32_gpioread(GPIO_OTGFS_VBUS); + + // note that the valid pins are active low + system_power.brick_valid = !stm32_gpioread(GPIO_VDD_BRICK_VALID); + system_power.servo_valid = !stm32_gpioread(GPIO_VDD_SERVO_VALID); + + // OC pins are active low + system_power.periph_5V_OC = !stm32_gpioread(GPIO_VDD_5V_PERIPH_OC); + system_power.hipower_5V_OC = !stm32_gpioread(GPIO_VDD_5V_HIPOWER_OC); + + /* lazily publish */ + if (_to_system_power > 0) { + orb_publish(ORB_ID(system_power), _to_system_power, &system_power); + } else { + _to_system_power = orb_advertise(ORB_ID(system_power), &system_power); + } +#endif // CONFIG_ARCH_BOARD_PX4FMU_V2 } uint16_t @@ -341,7 +386,7 @@ test(void) err(1, "can't open ADC device"); for (unsigned i = 0; i < 50; i++) { - adc_msg_s data[10]; + adc_msg_s data[12]; ssize_t count = read(fd, data, sizeof(data)); if (count < 0) @@ -374,6 +419,10 @@ adc_main(int argc, char *argv[]) g_adc = new ADC((1 << 2) | (1 << 3) | (1 << 4) | (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | (1 << 15)); #endif +#ifdef CONFIG_ARCH_BOARD_AEROCORE + /* XXX this hardcodes the default channel set for AeroCore - should be configurable */ + g_adc = new ADC((1 << 10) | (1 << 11) | (1 << 12) | (1 << 13)); +#endif if (g_adc == nullptr) errx(1, "couldn't allocate the ADC driver"); |