diff options
Diffstat (limited to 'src/drivers')
-rw-r--r-- | src/drivers/md25/BlockSysIdent.cpp | 8 | ||||
-rw-r--r-- | src/drivers/md25/BlockSysIdent.hpp | 10 | ||||
-rw-r--r-- | src/drivers/md25/md25.cpp | 87 | ||||
-rw-r--r-- | src/drivers/md25/md25.hpp | 18 | ||||
-rw-r--r-- | src/drivers/md25/md25_main.cpp | 49 | ||||
-rw-r--r-- | src/drivers/stm32/drv_hrt.c | 20 | ||||
-rw-r--r-- | src/drivers/stm32/tone_alarm/tone_alarm.cpp | 4 |
7 files changed, 176 insertions, 20 deletions
diff --git a/src/drivers/md25/BlockSysIdent.cpp b/src/drivers/md25/BlockSysIdent.cpp new file mode 100644 index 000000000..23b0724d8 --- /dev/null +++ b/src/drivers/md25/BlockSysIdent.cpp @@ -0,0 +1,8 @@ +#include "BlockSysIdent.hpp" + +BlockSysIdent::BlockSysIdent() : + Block(NULL, "SYSID"), + _freq(this, "FREQ"), + _ampl(this, "AMPL") +{ +} diff --git a/src/drivers/md25/BlockSysIdent.hpp b/src/drivers/md25/BlockSysIdent.hpp new file mode 100644 index 000000000..270635f40 --- /dev/null +++ b/src/drivers/md25/BlockSysIdent.hpp @@ -0,0 +1,10 @@ +#include <controllib/block/Block.hpp> +#include <controllib/block/BlockParam.hpp> + +class BlockSysIdent : public control::Block { +public: + BlockSysIdent(); +private: + control::BlockParam<float> _freq; + control::BlockParam<float> _ampl; +}; diff --git a/src/drivers/md25/md25.cpp b/src/drivers/md25/md25.cpp index 71932ad65..d43e3aef9 100644 --- a/src/drivers/md25/md25.cpp +++ b/src/drivers/md25/md25.cpp @@ -45,9 +45,16 @@ #include "md25.hpp" #include <poll.h> #include <stdio.h> +#include <math.h> +#include <string.h> #include <systemlib/err.h> #include <arch/board/board.h> +#include <mavlink/mavlink_log.h> + +#include <controllib/uorb/UOrbPublication.hpp> +#include <uORB/topics/debug_key_value.h> +#include <drivers/drv_hrt.h> // registers enum { @@ -72,6 +79,9 @@ enum { REG_COMMAND_RW, }; +// File descriptors +static int mavlink_fd; + MD25::MD25(const char *deviceName, int bus, uint16_t address, uint32_t speed) : I2C("MD25", deviceName, bus, address, speed), @@ -106,7 +116,8 @@ MD25::MD25(const char *deviceName, int bus, setMotor2Speed(0); resetEncoders(); _setMode(MD25::MODE_UNSIGNED_SPEED); - setSpeedRegulation(true); + setSpeedRegulation(false); + setMotorAccel(10); setTimeout(true); } @@ -298,6 +309,12 @@ int MD25::setDeviceAddress(uint8_t address) return OK; } +int MD25::setMotorAccel(uint8_t accel) +{ + return _writeUint8(REG_ACCEL_RATE_RW, + accel); +} + int MD25::setMotor1Speed(float value) { return _writeUint8(REG_SPEED1_RW, @@ -451,12 +468,12 @@ int md25Test(const char *deviceName, uint8_t bus, uint8_t address) MD25 md25("/dev/md25", bus, address); // print status - char buf[200]; + char buf[400]; md25.status(buf, sizeof(buf)); printf("%s\n", buf); // setup for test - md25.setSpeedRegulation(true); + md25.setSpeedRegulation(false); md25.setTimeout(true); float dt = 0.1; float speed = 0.2; @@ -550,4 +567,68 @@ int md25Test(const char *deviceName, uint8_t bus, uint8_t address) return 0; } +int md25Sine(const char *deviceName, uint8_t bus, uint8_t address, float amplitude, float frequency) +{ + printf("md25 sine: starting\n"); + + // setup + MD25 md25("/dev/md25", bus, address); + + // print status + char buf[400]; + md25.status(buf, sizeof(buf)); + printf("%s\n", buf); + + // setup for test + md25.setSpeedRegulation(false); + md25.setTimeout(true); + float dt = 0.01; + float t_final = 60.0; + float prev_revolution = md25.getRevolutions1(); + + // debug publication + control::UOrbPublication<debug_key_value_s> debug_msg(NULL, + ORB_ID(debug_key_value)); + + // sine wave for motor 1 + md25.resetEncoders(); + while (true) { + + // input + uint64_t timestamp = hrt_absolute_time(); + float t = timestamp/1000000.0f; + + float input_value = amplitude*sinf(2*M_PI*frequency*t); + md25.setMotor1Speed(input_value); + + // output + md25.readData(); + float current_revolution = md25.getRevolutions1(); + + // send input message + //strncpy(debug_msg.key, "md25 in ", 10); + //debug_msg.timestamp_ms = 1000*timestamp; + //debug_msg.value = input_value; + //debug_msg.update(); + + // send output message + strncpy(debug_msg.key, "md25 out ", 10); + debug_msg.timestamp_ms = 1000*timestamp; + debug_msg.value = current_revolution; + debug_msg.update(); + + if (t > t_final) break; + + // update for next step + prev_revolution = current_revolution; + + // sleep + usleep(1000000 * dt); + } + md25.setMotor1Speed(0); + + printf("md25 sine complete\n"); + return 0; +} + // vi:noet:smarttab:autoindent:ts=4:sw=4:tw=78 diff --git a/src/drivers/md25/md25.hpp b/src/drivers/md25/md25.hpp index e77511b16..1661f67f9 100644 --- a/src/drivers/md25/md25.hpp +++ b/src/drivers/md25/md25.hpp @@ -46,7 +46,7 @@ #include <poll.h> #include <stdio.h> -#include <controllib/block/UOrbSubscription.hpp> +#include <controllib/uorb/UOrbSubscription.hpp> #include <uORB/topics/actuator_controls.h> #include <drivers/device/i2c.h> @@ -213,6 +213,19 @@ public: int setDeviceAddress(uint8_t address); /** + * set motor acceleration + * @param accel + * controls motor speed change (1-10) + * accel rate | time for full fwd. to full rev. + * 1 | 6.375 s + * 2 | 1.6 s + * 3 | 0.675 s + * 5(default) | 1.275 s + * 10 | 0.65 s + */ + int setMotorAccel(uint8_t accel); + + /** * set motor 1 speed * @param normSpeed normalize speed between -1 and 1 * @return non-zero -> error @@ -290,4 +303,7 @@ private: // unit testing int md25Test(const char *deviceName, uint8_t bus, uint8_t address); +// sine testing +int md25Sine(const char *deviceName, uint8_t bus, uint8_t address, float amplitude, float frequency); + // vi:noet:smarttab:autoindent:ts=4:sw=4:tw=78 diff --git a/src/drivers/md25/md25_main.cpp b/src/drivers/md25/md25_main.cpp index e62c46b0d..7e5904d05 100644 --- a/src/drivers/md25/md25_main.cpp +++ b/src/drivers/md25/md25_main.cpp @@ -82,7 +82,7 @@ usage(const char *reason) if (reason) fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: md25 {start|stop|status|search|test|change_address}\n\n"); + fprintf(stderr, "usage: md25 {start|stop|read|status|search|test|change_address}\n\n"); exit(1); } @@ -136,6 +136,28 @@ int md25_main(int argc, char *argv[]) exit(0); } + if (!strcmp(argv[1], "sine")) { + + if (argc < 6) { + printf("usage: md25 sine bus address amp freq\n"); + exit(0); + } + + const char *deviceName = "/dev/md25"; + + uint8_t bus = strtoul(argv[2], nullptr, 0); + + uint8_t address = strtoul(argv[3], nullptr, 0); + + float amplitude = atof(argv[4]); + + float frequency = atof(argv[5]); + + md25Sine(deviceName, bus, address, amplitude, frequency); + + exit(0); + } + if (!strcmp(argv[1], "probe")) { if (argc < 4) { printf("usage: md25 probe bus address\n"); @@ -162,6 +184,29 @@ int md25_main(int argc, char *argv[]) exit(0); } + if (!strcmp(argv[1], "read")) { + if (argc < 4) { + printf("usage: md25 read bus address\n"); + exit(0); + } + + const char *deviceName = "/dev/md25"; + + uint8_t bus = strtoul(argv[2], nullptr, 0); + + uint8_t address = strtoul(argv[3], nullptr, 0); + + MD25 md25(deviceName, bus, address); + + // print status + char buf[400]; + md25.status(buf, sizeof(buf)); + printf("%s\n", buf); + + exit(0); + } + + if (!strcmp(argv[1], "search")) { if (argc < 3) { printf("usage: md25 search bus\n"); @@ -246,7 +291,7 @@ int md25_thread_main(int argc, char *argv[]) uint8_t address = strtoul(argv[4], nullptr, 0); // start - MD25 md25("/dev/md25", bus, address); + MD25 md25(deviceName, bus, address); thread_running = true; diff --git a/src/drivers/stm32/drv_hrt.c b/src/drivers/stm32/drv_hrt.c index 7ef3db970..83a1a1abb 100644 --- a/src/drivers/stm32/drv_hrt.c +++ b/src/drivers/stm32/drv_hrt.c @@ -70,7 +70,7 @@ #include "stm32_gpio.h" #include "stm32_tim.h" -#ifdef CONFIG_HRT_TIMER +#ifdef HRT_TIMER /* HRT configuration */ #if HRT_TIMER == 1 @@ -155,7 +155,7 @@ # error must not set CONFIG_STM32_TIM11=y and HRT_TIMER=11 # endif #else -# error HRT_TIMER must be set in board.h if CONFIG_HRT_TIMER=y +# error HRT_TIMER must be a value between 1 and 11 #endif /* @@ -275,7 +275,7 @@ static void hrt_call_invoke(void); /* * Specific registers and bits used by PPM sub-functions */ -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* * If the timer hardware doesn't support GTIM_CCER_CCxNP, then we will work around it. * @@ -326,7 +326,7 @@ static void hrt_call_invoke(void); # define CCER_PPM (GTIM_CCER_CC4E | GTIM_CCER_CC4P | GTIM_CCER_CC4NP) /* CC4, both edges */ # define CCER_PPM_FLIP GTIM_CCER_CC4P # else -# error HRT_PPM_CHANNEL must be a value between 1 and 4 if CONFIG_HRT_PPM is set +# error HRT_PPM_CHANNEL must be a value between 1 and 4 # endif /* @@ -377,7 +377,7 @@ static void hrt_ppm_decode(uint32_t status); # define CCMR1_PPM 0 # define CCMR2_PPM 0 # define CCER_PPM 0 -#endif /* CONFIG_HRT_PPM */ +#endif /* HRT_PPM_CHANNEL */ /* * Initialise the timer we are going to use. @@ -424,7 +424,7 @@ hrt_tim_init(void) up_enable_irq(HRT_TIMER_VECTOR); } -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* * Handle the PPM decoder state machine. */ @@ -526,7 +526,7 @@ error: ppm_decoded_channels = 0; } -#endif /* CONFIG_HRT_PPM */ +#endif /* HRT_PPM_CHANNEL */ /* * Handle the compare interupt by calling the callout dispatcher @@ -546,7 +546,7 @@ hrt_tim_isr(int irq, void *context) /* ack the interrupts we just read */ rSR = ~status; -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* was this a PPM edge? */ if (status & (SR_INT_PPM | SR_OVF_PPM)) { @@ -686,7 +686,7 @@ hrt_init(void) sq_init(&callout_queue); hrt_tim_init(); -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* configure the PPM input pin */ stm32_configgpio(GPIO_PPM_IN); #endif @@ -907,4 +907,4 @@ hrt_latency_update(void) } -#endif /* CONFIG_HRT_TIMER */ +#endif /* HRT_TIMER */ diff --git a/src/drivers/stm32/tone_alarm/tone_alarm.cpp b/src/drivers/stm32/tone_alarm/tone_alarm.cpp index 167ef30a8..2284be84d 100644 --- a/src/drivers/stm32/tone_alarm/tone_alarm.cpp +++ b/src/drivers/stm32/tone_alarm/tone_alarm.cpp @@ -117,10 +117,6 @@ #include <systemlib/err.h> -#ifndef CONFIG_HRT_TIMER -# error This driver requires CONFIG_HRT_TIMER -#endif - /* Tone alarm configuration */ #if TONE_ALARM_TIMER == 2 # define TONE_ALARM_BASE STM32_TIM2_BASE |