diff options
Diffstat (limited to 'src/include/mavlink/custom/headers/common/common.h')
-rw-r--r-- | src/include/mavlink/custom/headers/common/common.h | 686 |
1 files changed, 686 insertions, 0 deletions
diff --git a/src/include/mavlink/custom/headers/common/common.h b/src/include/mavlink/custom/headers/common/common.h new file mode 100644 index 000000000..e75640d16 --- /dev/null +++ b/src/include/mavlink/custom/headers/common/common.h @@ -0,0 +1,686 @@ +/** @file + * @brief MAVLink comm protocol generated from common.xml + * @see http://qgroundcontrol.org/mavlink/ + */ +#ifndef COMMON_H +#define COMMON_H + +#ifndef MAVLINK_H + #error Wrong include order: COMMON.H MUST NOT BE DIRECTLY USED. Include mavlink.h from the same directory instead or set ALL AND EVERY defines from MAVLINK.H manually accordingly, including the #define MAVLINK_H call. +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +// MESSAGE LENGTHS AND CRCS + +#ifndef MAVLINK_MESSAGE_LENGTHS +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 32, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 39, 45, 44, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 68, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 35, 35, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#endif + +#ifndef MAVLINK_MESSAGE_CRCS +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 79, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 147, 211, 198, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 101, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 25, 226, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#endif + +#ifndef MAVLINK_MESSAGE_INFO +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, MAVLINK_MESSAGE_INFO_ATTITUDE_SETPOINT_EXTERNAL, MAVLINK_MESSAGE_INFO_LOCAL_NED_POSITION_SETPOINT_EXTERNAL, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_EXTERNAL_INT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, MAVLINK_MESSAGE_INFO_GPS_RTK, MAVLINK_MESSAGE_INFO_GPS2_RTK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#endif + +#include "../protocol.h" + +#define MAVLINK_ENABLED_COMMON + +// ENUM DEFINITIONS + + +/** @brief Micro air vehicle / autopilot classes. This identifies the individual model. */ +#ifndef HAVE_ENUM_MAV_AUTOPILOT +#define HAVE_ENUM_MAV_AUTOPILOT +typedef enum MAV_AUTOPILOT +{ + MAV_AUTOPILOT_GENERIC=0, /* Generic autopilot, full support for everything | */ + MAV_AUTOPILOT_PIXHAWK=1, /* PIXHAWK autopilot, http://pixhawk.ethz.ch | */ + MAV_AUTOPILOT_SLUGS=2, /* SLUGS autopilot, http://slugsuav.soe.ucsc.edu | */ + MAV_AUTOPILOT_ARDUPILOTMEGA=3, /* ArduPilotMega / ArduCopter, http://diydrones.com | */ + MAV_AUTOPILOT_OPENPILOT=4, /* OpenPilot, http://openpilot.org | */ + MAV_AUTOPILOT_GENERIC_WAYPOINTS_ONLY=5, /* Generic autopilot only supporting simple waypoints | */ + MAV_AUTOPILOT_GENERIC_WAYPOINTS_AND_SIMPLE_NAVIGATION_ONLY=6, /* Generic autopilot supporting waypoints and other simple navigation commands | */ + MAV_AUTOPILOT_GENERIC_MISSION_FULL=7, /* Generic autopilot supporting the full mission command set | */ + MAV_AUTOPILOT_INVALID=8, /* No valid autopilot, e.g. a GCS or other MAVLink component | */ + MAV_AUTOPILOT_PPZ=9, /* PPZ UAV - http://nongnu.org/paparazzi | */ + MAV_AUTOPILOT_UDB=10, /* UAV Dev Board | */ + MAV_AUTOPILOT_FP=11, /* FlexiPilot | */ + MAV_AUTOPILOT_PX4=12, /* PX4 Autopilot - http://pixhawk.ethz.ch/px4/ | */ + MAV_AUTOPILOT_SMACCMPILOT=13, /* SMACCMPilot - http://smaccmpilot.org | */ + MAV_AUTOPILOT_AUTOQUAD=14, /* AutoQuad -- http://autoquad.org | */ + MAV_AUTOPILOT_ARMAZILA=15, /* Armazila -- http://armazila.com | */ + MAV_AUTOPILOT_AEROB=16, /* Aerob -- http://aerob.ru | */ + MAV_AUTOPILOT_ENUM_END=17, /* | */ +} MAV_AUTOPILOT; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_MAV_TYPE +#define HAVE_ENUM_MAV_TYPE +typedef enum MAV_TYPE +{ + MAV_TYPE_GENERIC=0, /* Generic micro air vehicle. | */ + MAV_TYPE_FIXED_WING=1, /* Fixed wing aircraft. | */ + MAV_TYPE_QUADROTOR=2, /* Quadrotor | */ + MAV_TYPE_COAXIAL=3, /* Coaxial helicopter | */ + MAV_TYPE_HELICOPTER=4, /* Normal helicopter with tail rotor. | */ + MAV_TYPE_ANTENNA_TRACKER=5, /* Ground installation | */ + MAV_TYPE_GCS=6, /* Operator control unit / ground control station | */ + MAV_TYPE_AIRSHIP=7, /* Airship, controlled | */ + MAV_TYPE_FREE_BALLOON=8, /* Free balloon, uncontrolled | */ + MAV_TYPE_ROCKET=9, /* Rocket | */ + MAV_TYPE_GROUND_ROVER=10, /* Ground rover | */ + MAV_TYPE_SURFACE_BOAT=11, /* Surface vessel, boat, ship | */ + MAV_TYPE_SUBMARINE=12, /* Submarine | */ + MAV_TYPE_HEXAROTOR=13, /* Hexarotor | */ + MAV_TYPE_OCTOROTOR=14, /* Octorotor | */ + MAV_TYPE_TRICOPTER=15, /* Octorotor | */ + MAV_TYPE_FLAPPING_WING=16, /* Flapping wing | */ + MAV_TYPE_KITE=17, /* Flapping wing | */ + MAV_TYPE_ONBOARD_CONTROLLER=18, /* Onboard companion controller | */ + MAV_TYPE_ENUM_END=19, /* | */ +} MAV_TYPE; +#endif + +/** @brief These flags encode the MAV mode. */ +#ifndef HAVE_ENUM_MAV_MODE_FLAG +#define HAVE_ENUM_MAV_MODE_FLAG +typedef enum MAV_MODE_FLAG +{ + MAV_MODE_FLAG_CUSTOM_MODE_ENABLED=1, /* 0b00000001 Reserved for future use. | */ + MAV_MODE_FLAG_TEST_ENABLED=2, /* 0b00000010 system has a test mode enabled. This flag is intended for temporary system tests and should not be used for stable implementations. | */ + MAV_MODE_FLAG_AUTO_ENABLED=4, /* 0b00000100 autonomous mode enabled, system finds its own goal positions. Guided flag can be set or not, depends on the actual implementation. | */ + MAV_MODE_FLAG_GUIDED_ENABLED=8, /* 0b00001000 guided mode enabled, system flies MISSIONs / mission items. | */ + MAV_MODE_FLAG_STABILIZE_ENABLED=16, /* 0b00010000 system stabilizes electronically its attitude (and optionally position). It needs however further control inputs to move around. | */ + MAV_MODE_FLAG_HIL_ENABLED=32, /* 0b00100000 hardware in the loop simulation. All motors / actuators are blocked, but internal software is full operational. | */ + MAV_MODE_FLAG_MANUAL_INPUT_ENABLED=64, /* 0b01000000 remote control input is enabled. | */ + MAV_MODE_FLAG_SAFETY_ARMED=128, /* 0b10000000 MAV safety set to armed. Motors are enabled / running / can start. Ready to fly. | */ + MAV_MODE_FLAG_ENUM_END=129, /* | */ +} MAV_MODE_FLAG; +#endif + +/** @brief These values encode the bit positions of the decode position. These values can be used to read the value of a flag bit by combining the base_mode variable with AND with the flag position value. The result will be either 0 or 1, depending on if the flag is set or not. */ +#ifndef HAVE_ENUM_MAV_MODE_FLAG_DECODE_POSITION +#define HAVE_ENUM_MAV_MODE_FLAG_DECODE_POSITION +typedef enum MAV_MODE_FLAG_DECODE_POSITION +{ + MAV_MODE_FLAG_DECODE_POSITION_CUSTOM_MODE=1, /* Eighth bit: 00000001 | */ + MAV_MODE_FLAG_DECODE_POSITION_TEST=2, /* Seventh bit: 00000010 | */ + MAV_MODE_FLAG_DECODE_POSITION_AUTO=4, /* Sixt bit: 00000100 | */ + MAV_MODE_FLAG_DECODE_POSITION_GUIDED=8, /* Fifth bit: 00001000 | */ + MAV_MODE_FLAG_DECODE_POSITION_STABILIZE=16, /* Fourth bit: 00010000 | */ + MAV_MODE_FLAG_DECODE_POSITION_HIL=32, /* Third bit: 00100000 | */ + MAV_MODE_FLAG_DECODE_POSITION_MANUAL=64, /* Second bit: 01000000 | */ + MAV_MODE_FLAG_DECODE_POSITION_SAFETY=128, /* First bit: 10000000 | */ + MAV_MODE_FLAG_DECODE_POSITION_ENUM_END=129, /* | */ +} MAV_MODE_FLAG_DECODE_POSITION; +#endif + +/** @brief Override command, pauses current mission execution and moves immediately to a position */ +#ifndef HAVE_ENUM_MAV_GOTO +#define HAVE_ENUM_MAV_GOTO +typedef enum MAV_GOTO +{ + MAV_GOTO_DO_HOLD=0, /* Hold at the current position. | */ + MAV_GOTO_DO_CONTINUE=1, /* Continue with the next item in mission execution. | */ + MAV_GOTO_HOLD_AT_CURRENT_POSITION=2, /* Hold at the current position of the system | */ + MAV_GOTO_HOLD_AT_SPECIFIED_POSITION=3, /* Hold at the position specified in the parameters of the DO_HOLD action | */ + MAV_GOTO_ENUM_END=4, /* | */ +} MAV_GOTO; +#endif + +/** @brief These defines are predefined OR-combined mode flags. There is no need to use values from this enum, but it + simplifies the use of the mode flags. Note that manual input is enabled in all modes as a safety override. */ +#ifndef HAVE_ENUM_MAV_MODE +#define HAVE_ENUM_MAV_MODE +typedef enum MAV_MODE +{ + MAV_MODE_PREFLIGHT=0, /* System is not ready to fly, booting, calibrating, etc. No flag is set. | */ + MAV_MODE_MANUAL_DISARMED=64, /* System is allowed to be active, under manual (RC) control, no stabilization | */ + MAV_MODE_TEST_DISARMED=66, /* UNDEFINED mode. This solely depends on the autopilot - use with caution, intended for developers only. | */ + MAV_MODE_STABILIZE_DISARMED=80, /* System is allowed to be active, under assisted RC control. | */ + MAV_MODE_GUIDED_DISARMED=88, /* System is allowed to be active, under autonomous control, manual setpoint | */ + MAV_MODE_AUTO_DISARMED=92, /* System is allowed to be active, under autonomous control and navigation (the trajectory is decided onboard and not pre-programmed by MISSIONs) | */ + MAV_MODE_MANUAL_ARMED=192, /* System is allowed to be active, under manual (RC) control, no stabilization | */ + MAV_MODE_TEST_ARMED=194, /* UNDEFINED mode. This solely depends on the autopilot - use with caution, intended for developers only. | */ + MAV_MODE_STABILIZE_ARMED=208, /* System is allowed to be active, under assisted RC control. | */ + MAV_MODE_GUIDED_ARMED=216, /* System is allowed to be active, under autonomous control, manual setpoint | */ + MAV_MODE_AUTO_ARMED=220, /* System is allowed to be active, under autonomous control and navigation (the trajectory is decided onboard and not pre-programmed by MISSIONs) | */ + MAV_MODE_ENUM_END=221, /* | */ +} MAV_MODE; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_MAV_STATE +#define HAVE_ENUM_MAV_STATE +typedef enum MAV_STATE +{ + MAV_STATE_UNINIT=0, /* Uninitialized system, state is unknown. | */ + MAV_STATE_BOOT=1, /* System is booting up. | */ + MAV_STATE_CALIBRATING=2, /* System is calibrating and not flight-ready. | */ + MAV_STATE_STANDBY=3, /* System is grounded and on standby. It can be launched any time. | */ + MAV_STATE_ACTIVE=4, /* System is active and might be already airborne. Motors are engaged. | */ + MAV_STATE_CRITICAL=5, /* System is in a non-normal flight mode. It can however still navigate. | */ + MAV_STATE_EMERGENCY=6, /* System is in a non-normal flight mode. It lost control over parts or over the whole airframe. It is in mayday and going down. | */ + MAV_STATE_POWEROFF=7, /* System just initialized its power-down sequence, will shut down now. | */ + MAV_STATE_ENUM_END=8, /* | */ +} MAV_STATE; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_MAV_COMPONENT +#define HAVE_ENUM_MAV_COMPONENT +typedef enum MAV_COMPONENT +{ + MAV_COMP_ID_ALL=0, /* | */ + MAV_COMP_ID_CAMERA=100, /* | */ + MAV_COMP_ID_SERVO1=140, /* | */ + MAV_COMP_ID_SERVO2=141, /* | */ + MAV_COMP_ID_SERVO3=142, /* | */ + MAV_COMP_ID_SERVO4=143, /* | */ + MAV_COMP_ID_SERVO5=144, /* | */ + MAV_COMP_ID_SERVO6=145, /* | */ + MAV_COMP_ID_SERVO7=146, /* | */ + MAV_COMP_ID_SERVO8=147, /* | */ + MAV_COMP_ID_SERVO9=148, /* | */ + MAV_COMP_ID_SERVO10=149, /* | */ + MAV_COMP_ID_SERVO11=150, /* | */ + MAV_COMP_ID_SERVO12=151, /* | */ + MAV_COMP_ID_SERVO13=152, /* | */ + MAV_COMP_ID_SERVO14=153, /* | */ + MAV_COMP_ID_MAPPER=180, /* | */ + MAV_COMP_ID_MISSIONPLANNER=190, /* | */ + MAV_COMP_ID_PATHPLANNER=195, /* | */ + MAV_COMP_ID_IMU=200, /* | */ + MAV_COMP_ID_IMU_2=201, /* | */ + MAV_COMP_ID_IMU_3=202, /* | */ + MAV_COMP_ID_GPS=220, /* | */ + MAV_COMP_ID_UDP_BRIDGE=240, /* | */ + MAV_COMP_ID_UART_BRIDGE=241, /* | */ + MAV_COMP_ID_SYSTEM_CONTROL=250, /* | */ + MAV_COMPONENT_ENUM_END=251, /* | */ +} MAV_COMPONENT; +#endif + +/** @brief These encode the sensors whose status is sent as part of the SYS_STATUS message. */ +#ifndef HAVE_ENUM_MAV_SYS_STATUS_SENSOR +#define HAVE_ENUM_MAV_SYS_STATUS_SENSOR +typedef enum MAV_SYS_STATUS_SENSOR +{ + MAV_SYS_STATUS_SENSOR_3D_GYRO=1, /* 0x01 3D gyro | */ + MAV_SYS_STATUS_SENSOR_3D_ACCEL=2, /* 0x02 3D accelerometer | */ + MAV_SYS_STATUS_SENSOR_3D_MAG=4, /* 0x04 3D magnetometer | */ + MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE=8, /* 0x08 absolute pressure | */ + MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE=16, /* 0x10 differential pressure | */ + MAV_SYS_STATUS_SENSOR_GPS=32, /* 0x20 GPS | */ + MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW=64, /* 0x40 optical flow | */ + MAV_SYS_STATUS_SENSOR_VISION_POSITION=128, /* 0x80 computer vision position | */ + MAV_SYS_STATUS_SENSOR_LASER_POSITION=256, /* 0x100 laser based position | */ + MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH=512, /* 0x200 external ground truth (Vicon or Leica) | */ + MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL=1024, /* 0x400 3D angular rate control | */ + MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION=2048, /* 0x800 attitude stabilization | */ + MAV_SYS_STATUS_SENSOR_YAW_POSITION=4096, /* 0x1000 yaw position | */ + MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL=8192, /* 0x2000 z/altitude control | */ + MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL=16384, /* 0x4000 x/y position control | */ + MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS=32768, /* 0x8000 motor outputs / control | */ + MAV_SYS_STATUS_SENSOR_RC_RECEIVER=65536, /* 0x10000 rc receiver | */ + MAV_SYS_STATUS_SENSOR_3D_GYRO2=131072, /* 0x20000 2nd 3D gyro | */ + MAV_SYS_STATUS_SENSOR_3D_ACCEL2=262144, /* 0x40000 2nd 3D accelerometer | */ + MAV_SYS_STATUS_SENSOR_3D_MAG2=524288, /* 0x80000 2nd 3D magnetometer | */ + MAV_SYS_STATUS_GEOFENCE=1048576, /* 0x100000 geofence | */ + MAV_SYS_STATUS_AHRS=2097152, /* 0x200000 AHRS subsystem health | */ + MAV_SYS_STATUS_SENSOR_ENUM_END=2097153, /* | */ +} MAV_SYS_STATUS_SENSOR; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_MAV_FRAME +#define HAVE_ENUM_MAV_FRAME +typedef enum MAV_FRAME +{ + MAV_FRAME_GLOBAL=0, /* Global coordinate frame, WGS84 coordinate system. First value / x: latitude, second value / y: longitude, third value / z: positive altitude over mean sea level (MSL) | */ + MAV_FRAME_LOCAL_NED=1, /* Local coordinate frame, Z-up (x: north, y: east, z: down). | */ + MAV_FRAME_MISSION=2, /* NOT a coordinate frame, indicates a mission command. | */ + MAV_FRAME_GLOBAL_RELATIVE_ALT=3, /* Global coordinate frame, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude, second value / y: longitude, third value / z: positive altitude with 0 being at the altitude of the home location. | */ + MAV_FRAME_LOCAL_ENU=4, /* Local coordinate frame, Z-down (x: east, y: north, z: up) | */ + MAV_FRAME_GLOBAL_INT=5, /* Global coordinate frame with some fields as scaled integers, WGS84 coordinate system. First value / x: latitude, second value / y: longitude, third value / z: positive altitude over mean sea level (MSL). Lat / Lon are scaled * 1E7 to avoid floating point accuracy limitations. | */ + MAV_FRAME_GLOBAL_RELATIVE_ALT_INT=6, /* Global coordinate frame with some fields as scaled integers, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude, second value / y: longitude, third value / z: positive altitude with 0 being at the altitude of the home location. Lat / Lon are scaled * 1E7 to avoid floating point accuracy limitations. | */ + MAV_FRAME_LOCAL_OFFSET_NED=7, /* Offset to the current local frame. Anything expressed in this frame should be added to the current local frame position. | */ + MAV_FRAME_BODY_NED=8, /* Setpoint in body NED frame. This makes sense if all position control is externalized - e.g. useful to command 2 m/s^2 acceleration to the right. | */ + MAV_FRAME_BODY_OFFSET_NED=9, /* Offset in body NED frame. This makes sense if adding setpoints to the current flight path, to avoid an obstacle - e.g. useful to command 2 m/s^2 acceleration to the east. | */ + MAV_FRAME_ENUM_END=10, /* | */ +} MAV_FRAME; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_MAVLINK_DATA_STREAM_TYPE +#define HAVE_ENUM_MAVLINK_DATA_STREAM_TYPE +typedef enum MAVLINK_DATA_STREAM_TYPE +{ + MAVLINK_DATA_STREAM_IMG_JPEG=1, /* | */ + MAVLINK_DATA_STREAM_IMG_BMP=2, /* | */ + MAVLINK_DATA_STREAM_IMG_RAW8U=3, /* | */ + MAVLINK_DATA_STREAM_IMG_RAW32U=4, /* | */ + MAVLINK_DATA_STREAM_IMG_PGM=5, /* | */ + MAVLINK_DATA_STREAM_IMG_PNG=6, /* | */ + MAVLINK_DATA_STREAM_TYPE_ENUM_END=7, /* | */ +} MAVLINK_DATA_STREAM_TYPE; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_FENCE_ACTION +#define HAVE_ENUM_FENCE_ACTION +typedef enum FENCE_ACTION +{ + FENCE_ACTION_NONE=0, /* Disable fenced mode | */ + FENCE_ACTION_GUIDED=1, /* Switched to guided mode to return point (fence point 0) | */ + FENCE_ACTION_REPORT=2, /* Report fence breach, but don't take action | */ + FENCE_ACTION_GUIDED_THR_PASS=3, /* Switched to guided mode to return point (fence point 0) with manual throttle control | */ + FENCE_ACTION_ENUM_END=4, /* | */ +} FENCE_ACTION; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_FENCE_BREACH +#define HAVE_ENUM_FENCE_BREACH +typedef enum FENCE_BREACH +{ + FENCE_BREACH_NONE=0, /* No last fence breach | */ + FENCE_BREACH_MINALT=1, /* Breached minimum altitude | */ + FENCE_BREACH_MAXALT=2, /* Breached maximum altitude | */ + FENCE_BREACH_BOUNDARY=3, /* Breached fence boundary | */ + FENCE_BREACH_ENUM_END=4, /* | */ +} FENCE_BREACH; +#endif + +/** @brief Enumeration of possible mount operation modes */ +#ifndef HAVE_ENUM_MAV_MOUNT_MODE +#define HAVE_ENUM_MAV_MOUNT_MODE +typedef enum MAV_MOUNT_MODE +{ + MAV_MOUNT_MODE_RETRACT=0, /* Load and keep safe position (Roll,Pitch,Yaw) from permant memory and stop stabilization | */ + MAV_MOUNT_MODE_NEUTRAL=1, /* Load and keep neutral position (Roll,Pitch,Yaw) from permanent memory. | */ + MAV_MOUNT_MODE_MAVLINK_TARGETING=2, /* Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization | */ + MAV_MOUNT_MODE_RC_TARGETING=3, /* Load neutral position and start RC Roll,Pitch,Yaw control with stabilization | */ + MAV_MOUNT_MODE_GPS_POINT=4, /* Load neutral position and start to point to Lat,Lon,Alt | */ + MAV_MOUNT_MODE_ENUM_END=5, /* | */ +} MAV_MOUNT_MODE; +#endif + +/** @brief Commands to be executed by the MAV. They can be executed on user request, or as part of a mission script. If the action is used in a mission, the parameter mapping to the waypoint/mission message is as follows: Param 1, Param 2, Param 3, Param 4, X: Param 5, Y:Param 6, Z:Param 7. This command list is similar what ARINC 424 is for commercial aircraft: A data format how to interpret waypoint/mission data. */ +#ifndef HAVE_ENUM_MAV_CMD +#define HAVE_ENUM_MAV_CMD +typedef enum MAV_CMD +{ + MAV_CMD_NAV_WAYPOINT=16, /* Navigate to MISSION. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Acceptance radius in meters (if the sphere with this radius is hit, the MISSION counts as reached)| 0 to pass through the WP, if > 0 radius in meters to pass by WP. Positive value for clockwise orbit, negative value for counter-clockwise orbit. Allows trajectory control.| Desired yaw angle at MISSION (rotary wing)| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_LOITER_UNLIM=17, /* Loiter around this MISSION an unlimited amount of time |Empty| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_LOITER_TURNS=18, /* Loiter around this MISSION for X turns |Turns| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_LOITER_TIME=19, /* Loiter around this MISSION for X seconds |Seconds (decimal)| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_RETURN_TO_LAUNCH=20, /* Return to launch location |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_NAV_LAND=21, /* Land at location |Empty| Empty| Empty| Desired yaw angle.| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ + MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to MISSION using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_GUIDED_LIMITS=90, /* set limits for external control |timeout - maximum time (in seconds) that external controller will be allowed to control vehicle. 0 means no timeout| absolute altitude min (in meters, WGS84) - if vehicle moves below this alt, the command will be aborted and the mission will continue. 0 means no lower altitude limit| absolute altitude max (in meters)- if vehicle moves above this alt, the command will be aborted and the mission will continue. 0 means no upper altitude limit| horizontal move limit (in meters, WGS84) - if vehicle moves more than this distance from it's location at the moment the command was executed, the command will be aborted and the mission will continue. 0 means no horizontal altitude limit| Empty| Empty| Empty| */ + MAV_CMD_NAV_GUIDED_MASTER=91, /* set id of master controller |System ID| Component ID| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_NAV_GUIDED_ENABLE=92, /* hand control over to an external controller |On / Off (> 0.5f on)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ + MAV_CMD_CONDITION_DISTANCE=114, /* Delay mission state machine until within desired distance of next NAV point. |Distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_CONDITION_YAW=115, /* Reach a certain target angle. |target angle: [0-360], 0 is north| speed during yaw change:[deg per second]| direction: negative: counter clockwise, positive: clockwise [-1,1]| relative offset or absolute angle: [ 1,0]| Empty| Empty| Empty| */ + MAV_CMD_CONDITION_LAST=159, /* NOP - This command is only used to mark the upper limit of the CONDITION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode, as defined by ENUM MAV_MODE| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list. Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed)| Speed (m/s, -1 indicates no change)| Throttle ( Percent, -1 indicates no change)| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude| */ + MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter. Caution! Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay number| Setting (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cyles with a desired period. |Relay number| Cycle count| Cycle time (seconds, decimal)| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_SET_SERVO=183, /* Set a servo to a desired PWM value. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ + MAV_CMD_DO_FLIGHTTERMINATION=185, /* Terminate flight immediately |Flight termination activated if > 0.5| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_RALLY_LAND=190, /* Mission command to perform a landing from a rally point. |Break altitude (meters)| Landing speed (m/s)| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_GO_AROUND=191, /* Mission command to safely abort an autonmous landing. |Altitude (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ + MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ + MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ + MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch or lat in degrees, depending on mount mode.| roll or lon in degrees depending on mount mode| yaw or alt (in meters) depending on mount mode| reserved| reserved| reserved| MAV_MOUNT_MODE enum value| */ + MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight |inverted (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1| q2 - quaternion param #2| q3 - quaternion param #3| q4 - quaternion param #4| Empty| Empty| Empty| */ + MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Compass/Motor interference calibration: 0: no, 1: yes| Empty| */ + MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ + MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ + MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ + MAV_CMD_OVERRIDE_GOTO=252, /* Hold / continue the current action |MAV_GOTO_DO_HOLD: hold MAV_GOTO_DO_CONTINUE: continue with next item in mission plan| MAV_GOTO_HOLD_AT_CURRENT_POSITION: Hold at current position MAV_GOTO_HOLD_AT_SPECIFIED_POSITION: hold at specified position| MAV_FRAME coordinate frame of hold point| Desired yaw angle in degrees| Latitude / X position| Longitude / Y position| Altitude / Z position| */ + MAV_CMD_MISSION_START=300, /* start running a mission |first_item: the first mission item to run| last_item: the last mission item to run (after this item is run, the mission ends)| */ + MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |1 to arm, 0 to disarm| */ + MAV_CMD_START_RX_PAIR=500, /* Starts receiver pairing |0:Spektrum| 0:Spektrum DSM2, 1:Spektrum DSMX| */ + MAV_CMD_ENUM_END=501, /* | */ +} MAV_CMD; +#endif + +/** @brief Data stream IDs. A data stream is not a fixed set of messages, but rather a + recommendation to the autopilot software. Individual autopilots may or may not obey + the recommended messages. */ +#ifndef HAVE_ENUM_MAV_DATA_STREAM +#define HAVE_ENUM_MAV_DATA_STREAM +typedef enum MAV_DATA_STREAM +{ + MAV_DATA_STREAM_ALL=0, /* Enable all data streams | */ + MAV_DATA_STREAM_RAW_SENSORS=1, /* Enable IMU_RAW, GPS_RAW, GPS_STATUS packets. | */ + MAV_DATA_STREAM_EXTENDED_STATUS=2, /* Enable GPS_STATUS, CONTROL_STATUS, AUX_STATUS | */ + MAV_DATA_STREAM_RC_CHANNELS=3, /* Enable RC_CHANNELS_SCALED, RC_CHANNELS_RAW, SERVO_OUTPUT_RAW | */ + MAV_DATA_STREAM_RAW_CONTROLLER=4, /* Enable ATTITUDE_CONTROLLER_OUTPUT, POSITION_CONTROLLER_OUTPUT, NAV_CONTROLLER_OUTPUT. | */ + MAV_DATA_STREAM_POSITION=6, /* Enable LOCAL_POSITION, GLOBAL_POSITION/GLOBAL_POSITION_INT messages. | */ + MAV_DATA_STREAM_EXTRA1=10, /* Dependent on the autopilot | */ + MAV_DATA_STREAM_EXTRA2=11, /* Dependent on the autopilot | */ + MAV_DATA_STREAM_EXTRA3=12, /* Dependent on the autopilot | */ + MAV_DATA_STREAM_ENUM_END=13, /* | */ +} MAV_DATA_STREAM; +#endif + +/** @brief The ROI (region of interest) for the vehicle. This can be + be used by the vehicle for camera/vehicle attitude alignment (see + MAV_CMD_NAV_ROI). */ +#ifndef HAVE_ENUM_MAV_ROI +#define HAVE_ENUM_MAV_ROI +typedef enum MAV_ROI +{ + MAV_ROI_NONE=0, /* No region of interest. | */ + MAV_ROI_WPNEXT=1, /* Point toward next MISSION. | */ + MAV_ROI_WPINDEX=2, /* Point toward given MISSION. | */ + MAV_ROI_LOCATION=3, /* Point toward fixed location. | */ + MAV_ROI_TARGET=4, /* Point toward of given id. | */ + MAV_ROI_ENUM_END=5, /* | */ +} MAV_ROI; +#endif + +/** @brief ACK / NACK / ERROR values as a result of MAV_CMDs and for mission item transmission. */ +#ifndef HAVE_ENUM_MAV_CMD_ACK +#define HAVE_ENUM_MAV_CMD_ACK +typedef enum MAV_CMD_ACK +{ + MAV_CMD_ACK_OK=1, /* Command / mission item is ok. | */ + MAV_CMD_ACK_ERR_FAIL=2, /* Generic error message if none of the other reasons fails or if no detailed error reporting is implemented. | */ + MAV_CMD_ACK_ERR_ACCESS_DENIED=3, /* The system is refusing to accept this command from this source / communication partner. | */ + MAV_CMD_ACK_ERR_NOT_SUPPORTED=4, /* Command or mission item is not supported, other commands would be accepted. | */ + MAV_CMD_ACK_ERR_COORDINATE_FRAME_NOT_SUPPORTED=5, /* The coordinate frame of this command / mission item is not supported. | */ + MAV_CMD_ACK_ERR_COORDINATES_OUT_OF_RANGE=6, /* The coordinate frame of this command is ok, but he coordinate values exceed the safety limits of this system. This is a generic error, please use the more specific error messages below if possible. | */ + MAV_CMD_ACK_ERR_X_LAT_OUT_OF_RANGE=7, /* The X or latitude value is out of range. | */ + MAV_CMD_ACK_ERR_Y_LON_OUT_OF_RANGE=8, /* The Y or longitude value is out of range. | */ + MAV_CMD_ACK_ERR_Z_ALT_OUT_OF_RANGE=9, /* The Z or altitude value is out of range. | */ + MAV_CMD_ACK_ENUM_END=10, /* | */ +} MAV_CMD_ACK; +#endif + +/** @brief Specifies the datatype of a MAVLink parameter. */ +#ifndef HAVE_ENUM_MAV_PARAM_TYPE +#define HAVE_ENUM_MAV_PARAM_TYPE +typedef enum MAV_PARAM_TYPE +{ + MAV_PARAM_TYPE_UINT8=1, /* 8-bit unsigned integer | */ + MAV_PARAM_TYPE_INT8=2, /* 8-bit signed integer | */ + MAV_PARAM_TYPE_UINT16=3, /* 16-bit unsigned integer | */ + MAV_PARAM_TYPE_INT16=4, /* 16-bit signed integer | */ + MAV_PARAM_TYPE_UINT32=5, /* 32-bit unsigned integer | */ + MAV_PARAM_TYPE_INT32=6, /* 32-bit signed integer | */ + MAV_PARAM_TYPE_UINT64=7, /* 64-bit unsigned integer | */ + MAV_PARAM_TYPE_INT64=8, /* 64-bit signed integer | */ + MAV_PARAM_TYPE_REAL32=9, /* 32-bit floating-point | */ + MAV_PARAM_TYPE_REAL64=10, /* 64-bit floating-point | */ + MAV_PARAM_TYPE_ENUM_END=11, /* | */ +} MAV_PARAM_TYPE; +#endif + +/** @brief result from a mavlink command */ +#ifndef HAVE_ENUM_MAV_RESULT +#define HAVE_ENUM_MAV_RESULT +typedef enum MAV_RESULT +{ + MAV_RESULT_ACCEPTED=0, /* Command ACCEPTED and EXECUTED | */ + MAV_RESULT_TEMPORARILY_REJECTED=1, /* Command TEMPORARY REJECTED/DENIED | */ + MAV_RESULT_DENIED=2, /* Command PERMANENTLY DENIED | */ + MAV_RESULT_UNSUPPORTED=3, /* Command UNKNOWN/UNSUPPORTED | */ + MAV_RESULT_FAILED=4, /* Command executed, but failed | */ + MAV_RESULT_ENUM_END=5, /* | */ +} MAV_RESULT; +#endif + +/** @brief result in a mavlink mission ack */ +#ifndef HAVE_ENUM_MAV_MISSION_RESULT +#define HAVE_ENUM_MAV_MISSION_RESULT +typedef enum MAV_MISSION_RESULT +{ + MAV_MISSION_ACCEPTED=0, /* mission accepted OK | */ + MAV_MISSION_ERROR=1, /* generic error / not accepting mission commands at all right now | */ + MAV_MISSION_UNSUPPORTED_FRAME=2, /* coordinate frame is not supported | */ + MAV_MISSION_UNSUPPORTED=3, /* command is not supported | */ + MAV_MISSION_NO_SPACE=4, /* mission item exceeds storage space | */ + MAV_MISSION_INVALID=5, /* one of the parameters has an invalid value | */ + MAV_MISSION_INVALID_PARAM1=6, /* param1 has an invalid value | */ + MAV_MISSION_INVALID_PARAM2=7, /* param2 has an invalid value | */ + MAV_MISSION_INVALID_PARAM3=8, /* param3 has an invalid value | */ + MAV_MISSION_INVALID_PARAM4=9, /* param4 has an invalid value | */ + MAV_MISSION_INVALID_PARAM5_X=10, /* x/param5 has an invalid value | */ + MAV_MISSION_INVALID_PARAM6_Y=11, /* y/param6 has an invalid value | */ + MAV_MISSION_INVALID_PARAM7=12, /* param7 has an invalid value | */ + MAV_MISSION_INVALID_SEQUENCE=13, /* received waypoint out of sequence | */ + MAV_MISSION_DENIED=14, /* not accepting any mission commands from this communication partner | */ + MAV_MISSION_RESULT_ENUM_END=15, /* | */ +} MAV_MISSION_RESULT; +#endif + +/** @brief Indicates the severity level, generally used for status messages to indicate their relative urgency. Based on RFC-5424 using expanded definitions at: http://www.kiwisyslog.com/kb/info:-syslog-message-levels/. */ +#ifndef HAVE_ENUM_MAV_SEVERITY +#define HAVE_ENUM_MAV_SEVERITY +typedef enum MAV_SEVERITY +{ + MAV_SEVERITY_EMERGENCY=0, /* System is unusable. This is a "panic" condition. | */ + MAV_SEVERITY_ALERT=1, /* Action should be taken immediately. Indicates error in non-critical systems. | */ + MAV_SEVERITY_CRITICAL=2, /* Action must be taken immediately. Indicates failure in a primary system. | */ + MAV_SEVERITY_ERROR=3, /* Indicates an error in secondary/redundant systems. | */ + MAV_SEVERITY_WARNING=4, /* Indicates about a possible future error if this is not resolved within a given timeframe. Example would be a low battery warning. | */ + MAV_SEVERITY_NOTICE=5, /* An unusual event has occured, though not an error condition. This should be investigated for the root cause. | */ + MAV_SEVERITY_INFO=6, /* Normal operational messages. Useful for logging. No action is required for these messages. | */ + MAV_SEVERITY_DEBUG=7, /* Useful non-operational messages that can assist in debugging. These should not occur during normal operation. | */ + MAV_SEVERITY_ENUM_END=8, /* | */ +} MAV_SEVERITY; +#endif + +/** @brief Power supply status flags (bitmask) */ +#ifndef HAVE_ENUM_MAV_POWER_STATUS +#define HAVE_ENUM_MAV_POWER_STATUS +typedef enum MAV_POWER_STATUS +{ + MAV_POWER_STATUS_BRICK_VALID=1, /* main brick power supply valid | */ + MAV_POWER_STATUS_SERVO_VALID=2, /* main servo power supply valid for FMU | */ + MAV_POWER_STATUS_USB_CONNECTED=4, /* USB power is connected | */ + MAV_POWER_STATUS_PERIPH_OVERCURRENT=8, /* peripheral supply is in over-current state | */ + MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT=16, /* hi-power peripheral supply is in over-current state | */ + MAV_POWER_STATUS_CHANGED=32, /* Power status has changed since boot | */ + MAV_POWER_STATUS_ENUM_END=33, /* | */ +} MAV_POWER_STATUS; +#endif + +/** @brief SERIAL_CONTROL device types */ +#ifndef HAVE_ENUM_SERIAL_CONTROL_DEV +#define HAVE_ENUM_SERIAL_CONTROL_DEV +typedef enum SERIAL_CONTROL_DEV +{ + SERIAL_CONTROL_DEV_TELEM1=0, /* First telemetry port | */ + SERIAL_CONTROL_DEV_TELEM2=1, /* Second telemetry port | */ + SERIAL_CONTROL_DEV_GPS1=2, /* First GPS port | */ + SERIAL_CONTROL_DEV_GPS2=3, /* Second GPS port | */ + SERIAL_CONTROL_DEV_ENUM_END=4, /* | */ +} SERIAL_CONTROL_DEV; +#endif + +/** @brief SERIAL_CONTROL flags (bitmask) */ +#ifndef HAVE_ENUM_SERIAL_CONTROL_FLAG +#define HAVE_ENUM_SERIAL_CONTROL_FLAG +typedef enum SERIAL_CONTROL_FLAG +{ + SERIAL_CONTROL_FLAG_REPLY=1, /* Set if this is a reply | */ + SERIAL_CONTROL_FLAG_RESPOND=2, /* Set if the sender wants the receiver to send a response as another SERIAL_CONTROL message | */ + SERIAL_CONTROL_FLAG_EXCLUSIVE=4, /* Set if access to the serial port should be removed from whatever driver is currently using it, giving exclusive access to the SERIAL_CONTROL protocol. The port can be handed back by sending a request without this flag set | */ + SERIAL_CONTROL_FLAG_BLOCKING=8, /* Block on writes to the serial port | */ + SERIAL_CONTROL_FLAG_MULTI=16, /* Send multiple replies until port is drained | */ + SERIAL_CONTROL_FLAG_ENUM_END=17, /* | */ +} SERIAL_CONTROL_FLAG; +#endif + +/** @brief Enumeration of distance sensor types */ +#ifndef HAVE_ENUM_MAV_DISTANCE_SENSOR +#define HAVE_ENUM_MAV_DISTANCE_SENSOR +typedef enum MAV_DISTANCE_SENSOR +{ + MAV_DISTANCE_SENSOR_LASER=0, /* Laser altimeter, e.g. LightWare SF02/F or PulsedLight units | */ + MAV_DISTANCE_SENSOR_ULTRASOUND=1, /* Ultrasound altimeter, e.g. MaxBotix units | */ + MAV_DISTANCE_SENSOR_ENUM_END=2, /* | */ +} MAV_DISTANCE_SENSOR; +#endif + + + +// MAVLINK VERSION + +#ifndef MAVLINK_VERSION +#define MAVLINK_VERSION 3 +#endif + +#if (MAVLINK_VERSION == 0) +#undef MAVLINK_VERSION +#define MAVLINK_VERSION 3 +#endif + +// MESSAGE DEFINITIONS +#include "./mavlink_msg_heartbeat.h" +#include "./mavlink_msg_sys_status.h" +#include "./mavlink_msg_system_time.h" +#include "./mavlink_msg_ping.h" +#include "./mavlink_msg_change_operator_control.h" +#include "./mavlink_msg_change_operator_control_ack.h" +#include "./mavlink_msg_auth_key.h" +#include "./mavlink_msg_set_mode.h" +#include "./mavlink_msg_param_request_read.h" +#include "./mavlink_msg_param_request_list.h" +#include "./mavlink_msg_param_value.h" +#include "./mavlink_msg_param_set.h" +#include "./mavlink_msg_gps_raw_int.h" +#include "./mavlink_msg_gps_status.h" +#include "./mavlink_msg_scaled_imu.h" +#include "./mavlink_msg_raw_imu.h" +#include "./mavlink_msg_raw_pressure.h" +#include "./mavlink_msg_scaled_pressure.h" +#include "./mavlink_msg_attitude.h" +#include "./mavlink_msg_attitude_quaternion.h" +#include "./mavlink_msg_local_position_ned.h" +#include "./mavlink_msg_global_position_int.h" +#include "./mavlink_msg_rc_channels_scaled.h" +#include "./mavlink_msg_rc_channels_raw.h" +#include "./mavlink_msg_servo_output_raw.h" +#include "./mavlink_msg_mission_request_partial_list.h" +#include "./mavlink_msg_mission_write_partial_list.h" +#include "./mavlink_msg_mission_item.h" +#include "./mavlink_msg_mission_request.h" +#include "./mavlink_msg_mission_set_current.h" +#include "./mavlink_msg_mission_current.h" +#include "./mavlink_msg_mission_request_list.h" +#include "./mavlink_msg_mission_count.h" +#include "./mavlink_msg_mission_clear_all.h" +#include "./mavlink_msg_mission_item_reached.h" +#include "./mavlink_msg_mission_ack.h" +#include "./mavlink_msg_set_gps_global_origin.h" +#include "./mavlink_msg_gps_global_origin.h" +#include "./mavlink_msg_set_local_position_setpoint.h" +#include "./mavlink_msg_local_position_setpoint.h" +#include "./mavlink_msg_global_position_setpoint_int.h" +#include "./mavlink_msg_set_global_position_setpoint_int.h" +#include "./mavlink_msg_safety_set_allowed_area.h" +#include "./mavlink_msg_safety_allowed_area.h" +#include "./mavlink_msg_set_roll_pitch_yaw_thrust.h" +#include "./mavlink_msg_set_roll_pitch_yaw_speed_thrust.h" +#include "./mavlink_msg_roll_pitch_yaw_thrust_setpoint.h" +#include "./mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint.h" +#include "./mavlink_msg_set_quad_motors_setpoint.h" +#include "./mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust.h" +#include "./mavlink_msg_nav_controller_output.h" +#include "./mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h" +#include "./mavlink_msg_state_correction.h" +#include "./mavlink_msg_rc_channels.h" +#include "./mavlink_msg_request_data_stream.h" +#include "./mavlink_msg_data_stream.h" +#include "./mavlink_msg_manual_control.h" +#include "./mavlink_msg_rc_channels_override.h" +#include "./mavlink_msg_vfr_hud.h" +#include "./mavlink_msg_command_long.h" +#include "./mavlink_msg_command_ack.h" +#include "./mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint.h" +#include "./mavlink_msg_manual_setpoint.h" +#include "./mavlink_msg_attitude_setpoint_external.h" +#include "./mavlink_msg_local_ned_position_setpoint_external.h" +#include "./mavlink_msg_global_position_setpoint_external_int.h" +#include "./mavlink_msg_local_position_ned_system_global_offset.h" +#include "./mavlink_msg_hil_state.h" +#include "./mavlink_msg_hil_controls.h" +#include "./mavlink_msg_hil_rc_inputs_raw.h" +#include "./mavlink_msg_optical_flow.h" +#include "./mavlink_msg_global_vision_position_estimate.h" +#include "./mavlink_msg_vision_position_estimate.h" +#include "./mavlink_msg_vision_speed_estimate.h" +#include "./mavlink_msg_vicon_position_estimate.h" +#include "./mavlink_msg_highres_imu.h" +#include "./mavlink_msg_omnidirectional_flow.h" +#include "./mavlink_msg_hil_sensor.h" +#include "./mavlink_msg_sim_state.h" +#include "./mavlink_msg_radio_status.h" +#include "./mavlink_msg_file_transfer_start.h" +#include "./mavlink_msg_file_transfer_dir_list.h" +#include "./mavlink_msg_file_transfer_res.h" +#include "./mavlink_msg_hil_gps.h" +#include "./mavlink_msg_hil_optical_flow.h" +#include "./mavlink_msg_hil_state_quaternion.h" +#include "./mavlink_msg_scaled_imu2.h" +#include "./mavlink_msg_log_request_list.h" +#include "./mavlink_msg_log_entry.h" +#include "./mavlink_msg_log_request_data.h" +#include "./mavlink_msg_log_data.h" +#include "./mavlink_msg_log_erase.h" +#include "./mavlink_msg_log_request_end.h" +#include "./mavlink_msg_gps_inject_data.h" +#include "./mavlink_msg_gps2_raw.h" +#include "./mavlink_msg_power_status.h" +#include "./mavlink_msg_serial_control.h" +#include "./mavlink_msg_gps_rtk.h" +#include "./mavlink_msg_gps2_rtk.h" +#include "./mavlink_msg_data_transmission_handshake.h" +#include "./mavlink_msg_encapsulated_data.h" +#include "./mavlink_msg_distance_sensor.h" +#include "./mavlink_msg_battery_status.h" +#include "./mavlink_msg_setpoint_8dof.h" +#include "./mavlink_msg_setpoint_6dof.h" +#include "./mavlink_msg_memory_vect.h" +#include "./mavlink_msg_debug_vect.h" +#include "./mavlink_msg_named_value_float.h" +#include "./mavlink_msg_named_value_int.h" +#include "./mavlink_msg_statustext.h" +#include "./mavlink_msg_debug.h" + +#ifdef __cplusplus +} +#endif // __cplusplus +#endif // COMMON_H |