diff options
Diffstat (limited to 'src/lib/ecl/attitude_fw')
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_pitch_controller.cpp | 108 | ||||
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_pitch_controller.h | 18 | ||||
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_roll_controller.cpp | 74 | ||||
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_roll_controller.h | 17 | ||||
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_yaw_controller.cpp | 115 | ||||
-rw-r--r-- | src/lib/ecl/attitude_fw/ecl_yaw_controller.h | 67 |
6 files changed, 304 insertions, 95 deletions
diff --git a/src/lib/ecl/attitude_fw/ecl_pitch_controller.cpp b/src/lib/ecl/attitude_fw/ecl_pitch_controller.cpp index 2eb58abd6..ccaed14ce 100644 --- a/src/lib/ecl/attitude_fw/ecl_pitch_controller.cpp +++ b/src/lib/ecl/attitude_fw/ecl_pitch_controller.cpp @@ -45,39 +45,29 @@ #include <geo/geo.h> #include <ecl/ecl.h> #include <mathlib/mathlib.h> +#include <systemlib/err.h> ECL_PitchController::ECL_PitchController() : _last_run(0), + _tc(0.1f), + _k_p(0.0f), + _k_i(0.0f), + _k_d(0.0f), + _integrator_max(0.0f), + _max_rate_pos(0.0f), + _max_rate_neg(0.0f), + _roll_ff(0.0f), _last_output(0.0f), _integrator(0.0f), _rate_error(0.0f), _rate_setpoint(0.0f), - _max_deflection_rad(math::radians(45.0f)) + _bodyrate_setpoint(0.0f) { } -float ECL_PitchController::control(float pitch_setpoint, float pitch, float pitch_rate, float roll, float scaler, - bool lock_integrator, float airspeed_min, float airspeed_max, float airspeed) +float ECL_PitchController::control_attitude(float pitch_setpoint, float roll, float pitch, float airspeed) { - /* get the usual dt estimate */ - uint64_t dt_micros = ecl_elapsed_time(&_last_run); - _last_run = ecl_absolute_time(); - float dt = (float)dt_micros * 1e-6f; - - /* lock integral for long intervals */ - if (dt_micros > 500000) - lock_integrator = true; - float k_roll_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f); - float k_i_rate = _k_i * _tc; - - /* input conditioning */ - if (!isfinite(airspeed)) { - /* airspeed is NaN, +- INF or not available, pick center of band */ - airspeed = 0.5f * (airspeed_min + airspeed_max); - } else if (airspeed < airspeed_min) { - airspeed = airspeed_min; - } /* flying inverted (wings upside down) ? */ bool inverted = false; @@ -105,29 +95,72 @@ float ECL_PitchController::control(float pitch_setpoint, float pitch, float pitc if (inverted) turn_offset = -turn_offset; + /* Calculate the error */ float pitch_error = pitch_setpoint - pitch; - /* rate setpoint from current error and time constant */ - _rate_setpoint = pitch_error / _tc; + + /* Apply P controller: rate setpoint from current error and time constant */ + _rate_setpoint = pitch_error / _tc; /* add turn offset */ _rate_setpoint += turn_offset; - _rate_error = _rate_setpoint - pitch_rate; + /* limit the rate */ //XXX: move to body angluar rates + if (_max_rate_pos > 0.01f && _max_rate_neg > 0.01f) { + if (_rate_setpoint > 0.0f) { + _rate_setpoint = (_rate_setpoint > _max_rate_pos) ? _max_rate_pos : _rate_setpoint; + } else { + _rate_setpoint = (_rate_setpoint < -_max_rate_neg) ? -_max_rate_neg : _rate_setpoint; + } - float ilimit_scaled = _integrator_max * scaler; + } - if (!lock_integrator && k_i_rate > 0.0f && airspeed > 0.5f * airspeed_min) { + return _rate_setpoint; +} - float id = _rate_error * k_i_rate * dt * scaler; +float ECL_PitchController::control_bodyrate(float roll, float pitch, + float pitch_rate, float yaw_rate, + float yaw_rate_setpoint, + float airspeed_min, float airspeed_max, float airspeed, float scaler, bool lock_integrator) +{ + /* get the usual dt estimate */ + uint64_t dt_micros = ecl_elapsed_time(&_last_run); + _last_run = ecl_absolute_time(); + float dt = (float)dt_micros * 1e-6f; + + /* lock integral for long intervals */ + if (dt_micros > 500000) + lock_integrator = true; + +// float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f); + float k_ff = 0; + + /* input conditioning */ + if (!isfinite(airspeed)) { + /* airspeed is NaN, +- INF or not available, pick center of band */ + airspeed = 0.5f * (airspeed_min + airspeed_max); + } else if (airspeed < airspeed_min) { + airspeed = airspeed_min; + } + + /* Transform setpoint to body angular rates */ + _bodyrate_setpoint = cosf(roll) * _rate_setpoint + cosf(pitch) * sinf(roll) * yaw_rate_setpoint; //jacobian + + /* Transform estimation to body angular rates */ + float pitch_bodyrate = cosf(roll) * pitch_rate + cosf(pitch) * sinf(roll) * yaw_rate; //jacobian + + _rate_error = _bodyrate_setpoint - pitch_bodyrate; + + if (!lock_integrator && _k_i > 0.0f && airspeed > 0.5f * airspeed_min) { + + float id = _rate_error * dt; /* - * anti-windup: do not allow integrator to increase into the - * wrong direction if actuator is at limit + * anti-windup: do not allow integrator to increase if actuator is at limit */ - if (_last_output < -_max_deflection_rad) { + if (_last_output < -1.0f) { /* only allow motion to center: increase value */ id = math::max(id, 0.0f); - } else if (_last_output > _max_deflection_rad) { + } else if (_last_output > 1.0f) { /* only allow motion to center: decrease value */ id = math::min(id, 0.0f); } @@ -136,11 +169,14 @@ float ECL_PitchController::control(float pitch_setpoint, float pitch, float pitc } /* integrator limit */ - _integrator = math::constrain(_integrator, -ilimit_scaled, ilimit_scaled); - /* store non-limited output */ - _last_output = ((_rate_error * _k_d * scaler) + _integrator + (_rate_setpoint * k_roll_ff)) * scaler; - - return math::constrain(_last_output, -_max_deflection_rad, _max_deflection_rad); + //xxx: until start detection is available: integral part in control signal is limited here + float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max); + + /* Apply PI rate controller and store non-limited output */ + _last_output = (_rate_error * _k_p + integrator_constrained + _rate_setpoint * k_ff) * scaler * scaler; //scaler is proportional to 1/airspeed +// warnx("pitch: _integrator: %.4f, _integrator_max: %.4f, airspeed %.4f, _k_i %.4f, _k_p: %.4f", (double)_integrator, (double)_integrator_max, (double)airspeed, (double)_k_i, (double)_k_p); +// warnx("roll: _last_output %.4f", (double)_last_output); + return math::constrain(_last_output, -1.0f, 1.0f); } void ECL_PitchController::reset_integrator() diff --git a/src/lib/ecl/attitude_fw/ecl_pitch_controller.h b/src/lib/ecl/attitude_fw/ecl_pitch_controller.h index 1e6cec6a1..ba8ed3e6f 100644 --- a/src/lib/ecl/attitude_fw/ecl_pitch_controller.h +++ b/src/lib/ecl/attitude_fw/ecl_pitch_controller.h @@ -36,6 +36,7 @@ * Definition of a simple orthogonal pitch PID controller. * * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@gmail.com> * * Acknowledgements: * @@ -51,13 +52,18 @@ #include <stdbool.h> #include <stdint.h> -class __EXPORT ECL_PitchController +class __EXPORT ECL_PitchController //XXX: create controller superclass { public: ECL_PitchController(); - float control(float pitch_setpoint, float pitch, float pitch_rate, float roll, float scaler = 1.0f, - bool lock_integrator = false, float airspeed_min = 0.0f, float airspeed_max = 0.0f, float airspeed = (0.0f / 0.0f)); + float control_attitude(float pitch_setpoint, float roll, float pitch, float airspeed); + + + float control_bodyrate(float roll, float pitch, + float pitch_rate, float yaw_rate, + float yaw_rate_setpoint, + float airspeed_min = 0.0f, float airspeed_max = 0.0f, float airspeed = (0.0f / 0.0f), float scaler = 1.0f, bool lock_integrator = false); void reset_integrator(); @@ -94,6 +100,10 @@ public: return _rate_setpoint; } + float get_desired_bodyrate() { + return _bodyrate_setpoint; + } + private: uint64_t _last_run; @@ -109,7 +119,7 @@ private: float _integrator; float _rate_error; float _rate_setpoint; - float _max_deflection_rad; + float _bodyrate_setpoint; }; #endif // ECL_PITCH_CONTROLLER_H diff --git a/src/lib/ecl/attitude_fw/ecl_roll_controller.cpp b/src/lib/ecl/attitude_fw/ecl_roll_controller.cpp index 0b1ffa7a4..4b0bfc6c4 100644 --- a/src/lib/ecl/attitude_fw/ecl_roll_controller.cpp +++ b/src/lib/ecl/attitude_fw/ecl_roll_controller.cpp @@ -45,21 +45,46 @@ #include <geo/geo.h> #include <ecl/ecl.h> #include <mathlib/mathlib.h> +#include <systemlib/err.h> ECL_RollController::ECL_RollController() : _last_run(0), _tc(0.1f), + _k_p(0.0f), + _k_i(0.0f), + _k_d(0.0f), + _integrator_max(0.0f), + _max_rate(0.0f), _last_output(0.0f), _integrator(0.0f), _rate_error(0.0f), _rate_setpoint(0.0f), - _max_deflection_rad(math::radians(45.0f)) + _bodyrate_setpoint(0.0f) { +} + +float ECL_RollController::control_attitude(float roll_setpoint, float roll) +{ + + /* Calculate error */ + float roll_error = roll_setpoint - roll; + + /* Apply P controller */ + _rate_setpoint = roll_error / _tc; + + /* limit the rate */ //XXX: move to body angluar rates + if (_max_rate > 0.01f) { + _rate_setpoint = (_rate_setpoint > _max_rate) ? _max_rate : _rate_setpoint; + _rate_setpoint = (_rate_setpoint < -_max_rate) ? -_max_rate : _rate_setpoint; + } + return _rate_setpoint; } -float ECL_RollController::control(float roll_setpoint, float roll, float roll_rate, - float scaler, bool lock_integrator, float airspeed_min, float airspeed_max, float airspeed) +float ECL_RollController::control_bodyrate(float pitch, + float roll_rate, float yaw_rate, + float yaw_rate_setpoint, + float airspeed_min, float airspeed_max, float airspeed, float scaler, bool lock_integrator) { /* get the usual dt estimate */ uint64_t dt_micros = ecl_elapsed_time(&_last_run); @@ -70,10 +95,11 @@ float ECL_RollController::control(float roll_setpoint, float roll, float roll_ra if (dt_micros > 500000) lock_integrator = true; - float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f); - float k_i_rate = _k_i * _tc; +// float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f); + float k_ff = 0; //xxx: param /* input conditioning */ +// warnx("airspeed pre %.4f", (double)airspeed); if (!isfinite(airspeed)) { /* airspeed is NaN, +- INF or not available, pick center of band */ airspeed = 0.5f * (airspeed_min + airspeed_max); @@ -81,32 +107,27 @@ float ECL_RollController::control(float roll_setpoint, float roll, float roll_ra airspeed = airspeed_min; } - float roll_error = roll_setpoint - roll; - _rate_setpoint = roll_error / _tc; - - /* limit the rate */ - if (_max_rate > 0.01f) { - _rate_setpoint = (_rate_setpoint > _max_rate) ? _max_rate : _rate_setpoint; - _rate_setpoint = (_rate_setpoint < -_max_rate) ? -_max_rate : _rate_setpoint; - } - _rate_error = _rate_setpoint - roll_rate; + /* Transform setpoint to body angular rates */ + _bodyrate_setpoint = _rate_setpoint - sinf(pitch) * yaw_rate_setpoint; //jacobian + /* Transform estimation to body angular rates */ + float roll_bodyrate = roll_rate - sinf(pitch) * yaw_rate; //jacobian - float ilimit_scaled = _integrator_max * scaler; + /* Calculate body angular rate error */ + _rate_error = _bodyrate_setpoint - roll_bodyrate; //body angular rate error - if (!lock_integrator && k_i_rate > 0.0f && airspeed > 0.5f * airspeed_min) { + if (!lock_integrator && _k_i > 0.0f && airspeed > 0.5f * airspeed_min) { - float id = _rate_error * k_i_rate * dt * scaler; + float id = _rate_error * dt; /* - * anti-windup: do not allow integrator to increase into the - * wrong direction if actuator is at limit + * anti-windup: do not allow integrator to increase if actuator is at limit */ - if (_last_output < -_max_deflection_rad) { + if (_last_output < -1.0f) { /* only allow motion to center: increase value */ id = math::max(id, 0.0f); - } else if (_last_output > _max_deflection_rad) { + } else if (_last_output > 1.0f) { /* only allow motion to center: decrease value */ id = math::min(id, 0.0f); } @@ -115,11 +136,14 @@ float ECL_RollController::control(float roll_setpoint, float roll, float roll_ra } /* integrator limit */ - _integrator = math::constrain(_integrator, -ilimit_scaled, ilimit_scaled); - /* store non-limited output */ - _last_output = ((_rate_error * _k_d * scaler) + _integrator + (_rate_setpoint * k_ff)) * scaler; + //xxx: until start detection is available: integral part in control signal is limited here + float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max); + //warnx("roll: _integrator: %.4f, _integrator_max: %.4f", (double)_integrator, (double)_integrator_max); + + /* Apply PI rate controller and store non-limited output */ + _last_output = (_rate_error * _k_p + integrator_constrained + _rate_setpoint * k_ff) * scaler * scaler; //scaler is proportional to 1/airspeed - return math::constrain(_last_output, -_max_deflection_rad, _max_deflection_rad); + return math::constrain(_last_output, -1.0f, 1.0f); } void ECL_RollController::reset_integrator() diff --git a/src/lib/ecl/attitude_fw/ecl_roll_controller.h b/src/lib/ecl/attitude_fw/ecl_roll_controller.h index 0d4ea9333..dd7d1bf53 100644 --- a/src/lib/ecl/attitude_fw/ecl_roll_controller.h +++ b/src/lib/ecl/attitude_fw/ecl_roll_controller.h @@ -36,6 +36,7 @@ * Definition of a simple orthogonal roll PID controller. * * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@gmail.com> * * Acknowledgements: * @@ -51,13 +52,17 @@ #include <stdbool.h> #include <stdint.h> -class __EXPORT ECL_RollController +class __EXPORT ECL_RollController //XXX: create controller superclass { public: ECL_RollController(); - float control(float roll_setpoint, float roll, float roll_rate, - float scaler = 1.0f, bool lock_integrator = false, float airspeed_min = 0.0f, float airspeed_max = 0.0f, float airspeed = (0.0f / 0.0f)); + float control_attitude(float roll_setpoint, float roll); + + float control_bodyrate(float pitch, + float roll_rate, float yaw_rate, + float yaw_rate_setpoint, + float airspeed_min = 0.0f, float airspeed_max = 0.0f, float airspeed = (0.0f / 0.0f), float scaler = 1.0f, bool lock_integrator = false); void reset_integrator(); @@ -90,6 +95,10 @@ public: return _rate_setpoint; } + float get_desired_bodyrate() { + return _bodyrate_setpoint; + } + private: uint64_t _last_run; float _tc; @@ -102,7 +111,7 @@ private: float _integrator; float _rate_error; float _rate_setpoint; - float _max_deflection_rad; + float _bodyrate_setpoint; }; #endif // ECL_ROLL_CONTROLLER_H diff --git a/src/lib/ecl/attitude_fw/ecl_yaw_controller.cpp b/src/lib/ecl/attitude_fw/ecl_yaw_controller.cpp index b786acf24..a4ecc48a2 100644 --- a/src/lib/ecl/attitude_fw/ecl_yaw_controller.cpp +++ b/src/lib/ecl/attitude_fw/ecl_yaw_controller.cpp @@ -44,29 +44,126 @@ #include <geo/geo.h> #include <ecl/ecl.h> #include <mathlib/mathlib.h> +#include <systemlib/err.h> ECL_YawController::ECL_YawController() : _last_run(0), - _last_error(0.0f), + _k_p(0.0f), + _k_i(0.0f), + _k_d(0.0f), + _integrator_max(0.0f), + _max_rate(0.0f), + _roll_ff(0.0f), _last_output(0.0f), - _last_rate_hp_out(0.0f), - _last_rate_hp_in(0.0f), - _k_d_last(0.0f), - _integrator(0.0f) + _integrator(0.0f), + _rate_error(0.0f), + _rate_setpoint(0.0f), + _bodyrate_setpoint(0.0f), + _coordinated_min_speed(1.0f) { +} + +float ECL_YawController::control_attitude(float roll, float pitch, + float speed_body_u, float speed_body_v, float speed_body_w, + float roll_rate_setpoint, float pitch_rate_setpoint) +{ +// static int counter = 0; + /* Calculate desired yaw rate from coordinated turn constraint / (no side forces) */ + _rate_setpoint = 0.0f; + if (sqrtf(speed_body_u * speed_body_u + speed_body_v * speed_body_v + speed_body_w * speed_body_w) > _coordinated_min_speed) { + float denumerator = (speed_body_u * cosf(roll) * cosf(pitch) + speed_body_w * sinf(pitch)); + if(denumerator != 0.0f) { //XXX: floating point comparison + _rate_setpoint = (speed_body_w * roll_rate_setpoint + 9.81f * sinf(roll) * cosf(pitch) + speed_body_u * pitch_rate_setpoint * sinf(roll)) / denumerator; +// warnx("yaw: speed_body_u %.f speed_body_w %1.f roll %.1f pitch %.1f denumerator %.1f _rate_setpoint %.1f", speed_body_u, speed_body_w, denumerator, _rate_setpoint); + } + +// if(counter % 20 == 0) { +// warnx("denumerator: %.4f, speed_body_u: %.4f, speed_body_w: %.4f, cosf(roll): %.4f, cosf(pitch): %.4f, sinf(pitch): %.4f", (double)denumerator, (double)speed_body_u, (double)speed_body_w, (double)cosf(roll), (double)cosf(pitch), (double)sinf(pitch)); +// } + } + + /* limit the rate */ //XXX: move to body angluar rates + if (_max_rate > 0.01f) { + _rate_setpoint = (_rate_setpoint > _max_rate) ? _max_rate : _rate_setpoint; + _rate_setpoint = (_rate_setpoint < -_max_rate) ? -_max_rate : _rate_setpoint; + } + +// counter++; + + if(!isfinite(_rate_setpoint)){ + warnx("yaw rate sepoint not finite"); + _rate_setpoint = 0.0f; + } + + return _rate_setpoint; } -float ECL_YawController::control(float roll, float yaw_rate, float accel_y, float scaler, bool lock_integrator, - float airspeed_min, float airspeed_max, float aspeed) +float ECL_YawController::control_bodyrate(float roll, float pitch, + float pitch_rate, float yaw_rate, + float pitch_rate_setpoint, + float airspeed_min, float airspeed_max, float airspeed, float scaler, bool lock_integrator) { /* get the usual dt estimate */ uint64_t dt_micros = ecl_elapsed_time(&_last_run); _last_run = ecl_absolute_time(); + float dt = (float)dt_micros * 1e-6f; + + /* lock integral for long intervals */ + if (dt_micros > 500000) + lock_integrator = true; + + +// float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f); + float k_ff = 0; + + + /* input conditioning */ + if (!isfinite(airspeed)) { + /* airspeed is NaN, +- INF or not available, pick center of band */ + airspeed = 0.5f * (airspeed_min + airspeed_max); + } else if (airspeed < airspeed_min) { + airspeed = airspeed_min; + } + + + /* Transform setpoint to body angular rates */ + _bodyrate_setpoint = -sinf(roll) * pitch_rate_setpoint + cosf(roll)*cosf(pitch) * _rate_setpoint; //jacobian + + /* Transform estimation to body angular rates */ + float yaw_bodyrate = -sinf(roll) * pitch_rate + cosf(roll)*cosf(pitch) * yaw_rate; //jacobian + + /* Calculate body angular rate error */ + _rate_error = _bodyrate_setpoint - yaw_bodyrate; //body angular rate error + + if (!lock_integrator && _k_i > 0.0f && airspeed > 0.5f * airspeed_min) { + + float id = _rate_error * dt; + + /* + * anti-windup: do not allow integrator to increase if actuator is at limit + */ + if (_last_output < -1.0f) { + /* only allow motion to center: increase value */ + id = math::max(id, 0.0f); + } else if (_last_output > 1.0f) { + /* only allow motion to center: decrease value */ + id = math::min(id, 0.0f); + } + + _integrator += id; + } + + /* integrator limit */ + //xxx: until start detection is available: integral part in control signal is limited here + float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max); + + /* Apply PI rate controller and store non-limited output */ + _last_output = (_rate_error * _k_p + integrator_constrained + _rate_setpoint * k_ff) * scaler * scaler; //scaler is proportional to 1/airspeed + //warnx("yaw:_last_output: %.4f, _integrator: %.4f, _integrator_max: %.4f, airspeed %.4f, _k_i %.4f, _k_p: %.4f", (double)_last_output, (double)_integrator, (double)_integrator_max, (double)airspeed, (double)_k_i, (double)_k_p); - float dt = (dt_micros > 500000) ? 0.0f : dt_micros / 1000000; - return 0.0f; + return math::constrain(_last_output, -1.0f, 1.0f); } void ECL_YawController::reset_integrator() diff --git a/src/lib/ecl/attitude_fw/ecl_yaw_controller.h b/src/lib/ecl/attitude_fw/ecl_yaw_controller.h index 66b227918..b5ae1e6af 100644 --- a/src/lib/ecl/attitude_fw/ecl_yaw_controller.h +++ b/src/lib/ecl/attitude_fw/ecl_yaw_controller.h @@ -35,6 +35,15 @@ * @file ecl_yaw_controller.h * Definition of a simple orthogonal coordinated turn yaw PID controller. * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@gmail.com> + * + * Acknowledgements: + * + * The control design is based on a design + * by Paul Riseborough and Andrew Tridgell, 2013, + * which in turn is based on initial work of + * Jonathan Challinger, 2012. */ #ifndef ECL_YAW_CONTROLLER_H #define ECL_YAW_CONTROLLER_H @@ -42,47 +51,71 @@ #include <stdbool.h> #include <stdint.h> -class __EXPORT ECL_YawController +class __EXPORT ECL_YawController //XXX: create controller superclass { public: ECL_YawController(); - float control(float roll, float yaw_rate, float accel_y, float scaler = 1.0f, bool lock_integrator = false, - float airspeed_min = 0, float airspeed_max = 0, float aspeed = (0.0f / 0.0f)); + float control_attitude(float roll, float pitch, + float speed_body_u, float speed_body_v, float speed_body_w, + float roll_rate_setpoint, float pitch_rate_setpoint); + + float control_bodyrate( float roll, float pitch, + float pitch_rate, float yaw_rate, + float pitch_rate_setpoint, + float airspeed_min, float airspeed_max, float airspeed, float scaler, bool lock_integrator); void reset_integrator(); - void set_k_side(float k_a) { - _k_side = k_a; - } + void set_k_p(float k_p) { + _k_p = k_p; + } void set_k_i(float k_i) { _k_i = k_i; } void set_k_d(float k_d) { _k_d = k_d; } - void set_k_roll_ff(float k_roll_ff) { - _k_roll_ff = k_roll_ff; - } void set_integrator_max(float max) { _integrator_max = max; } + void set_max_rate(float max_rate) { + _max_rate = max_rate; + } + void set_k_roll_ff(float roll_ff) { + _roll_ff = roll_ff; + } + void set_coordinated_min_speed(float coordinated_min_speed) { + _coordinated_min_speed = coordinated_min_speed; + } + + + float get_rate_error() { + return _rate_error; + } + + float get_desired_rate() { + return _rate_setpoint; + } + + float get_desired_bodyrate() { + return _bodyrate_setpoint; + } private: uint64_t _last_run; - - float _k_side; + float _k_p; float _k_i; float _k_d; - float _k_roll_ff; float _integrator_max; - - float _last_error; + float _max_rate; + float _roll_ff; float _last_output; - float _last_rate_hp_out; - float _last_rate_hp_in; - float _k_d_last; float _integrator; + float _rate_error; + float _rate_setpoint; + float _bodyrate_setpoint; + float _coordinated_min_speed; }; |