aboutsummaryrefslogtreecommitdiff
path: root/src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c')
-rw-r--r--src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c479
1 files changed, 0 insertions, 479 deletions
diff --git a/src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c b/src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c
deleted file mode 100644
index 73df3fb9e..000000000
--- a/src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/****************************************************************************
- *
- * Copyright (C) 2012 PX4 Development Team. All rights reserved.
- * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch>
- * @author Doug Weibel <douglas.weibel@colorado.edu>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-/**
- * @file fixedwing_pos_control.c
- * Implementation of a fixed wing attitude controller.
- */
-
-#include <nuttx/config.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <math.h>
-#include <poll.h>
-#include <time.h>
-#include <drivers/drv_hrt.h>
-#include <arch/board/board.h>
-#include <uORB/uORB.h>
-#include <uORB/topics/vehicle_global_position.h>
-#include <uORB/topics/vehicle_global_position_setpoint.h>
-#include <uORB/topics/vehicle_attitude_setpoint.h>
-#include <uORB/topics/manual_control_setpoint.h>
-#include <uORB/topics/actuator_controls.h>
-#include <uORB/topics/vehicle_rates_setpoint.h>
-#include <uORB/topics/vehicle_attitude.h>
-#include <uORB/topics/parameter_update.h>
-#include <systemlib/param/param.h>
-#include <systemlib/pid/pid.h>
-#include <systemlib/geo/geo.h>
-#include <systemlib/perf_counter.h>
-#include <systemlib/systemlib.h>
-
-/*
- * Controller parameters, accessible via MAVLink
- *
- */
-PARAM_DEFINE_FLOAT(FW_HEAD_P, 0.1f);
-PARAM_DEFINE_FLOAT(FW_HEADR_I, 0.1f);
-PARAM_DEFINE_FLOAT(FW_HEADR_LIM, 1.5f); //TODO: think about reasonable value
-PARAM_DEFINE_FLOAT(FW_XTRACK_P, 0.01745f); // Radians per meter off track
-PARAM_DEFINE_FLOAT(FW_ALT_P, 0.1f);
-PARAM_DEFINE_FLOAT(FW_ROLL_LIM, 0.7f); // Roll angle limit in radians
-PARAM_DEFINE_FLOAT(FW_HEADR_P, 0.1f);
-PARAM_DEFINE_FLOAT(FW_PITCH_LIM, 0.35f); /**< Pitch angle limit in radians per second */
-
-struct fw_pos_control_params {
- float heading_p;
- float headingr_p;
- float headingr_i;
- float headingr_lim;
- float xtrack_p;
- float altitude_p;
- float roll_lim;
- float pitch_lim;
-};
-
-struct fw_pos_control_param_handles {
- param_t heading_p;
- param_t headingr_p;
- param_t headingr_i;
- param_t headingr_lim;
- param_t xtrack_p;
- param_t altitude_p;
- param_t roll_lim;
- param_t pitch_lim;
-};
-
-
-struct planned_path_segments_s {
- bool segment_type;
- double start_lat; // Start of line or center of arc
- double start_lon;
- double end_lat;
- double end_lon;
- float radius; // Radius of arc
- float arc_start_bearing; // Bearing from center to start of arc
- float arc_sweep; // Angle (radians) swept out by arc around center.
- // Positive for clockwise, negative for counter-clockwise
-};
-
-
-/* Prototypes */
-/* Internal Prototypes */
-static int parameters_init(struct fw_pos_control_param_handles *h);
-static int parameters_update(const struct fw_pos_control_param_handles *h, struct fw_pos_control_params *p);
-
-/**
- * Deamon management function.
- */
-__EXPORT int fixedwing_pos_control_main(int argc, char *argv[]);
-
-/**
- * Mainloop of deamon.
- */
-int fixedwing_pos_control_thread_main(int argc, char *argv[]);
-
-/**
- * Print the correct usage.
- */
-static void usage(const char *reason);
-
-/* Variables */
-static bool thread_should_exit = false; /**< Deamon exit flag */
-static bool thread_running = false; /**< Deamon status flag */
-static int deamon_task; /**< Handle of deamon task / thread */
-
-
-/**
- * Parameter management
- */
-static int parameters_init(struct fw_pos_control_param_handles *h)
-{
- /* PID parameters */
- h->heading_p = param_find("FW_HEAD_P");
- h->headingr_p = param_find("FW_HEADR_P");
- h->headingr_i = param_find("FW_HEADR_I");
- h->headingr_lim = param_find("FW_HEADR_LIM");
- h->xtrack_p = param_find("FW_XTRACK_P");
- h->altitude_p = param_find("FW_ALT_P");
- h->roll_lim = param_find("FW_ROLL_LIM");
- h->pitch_lim = param_find("FW_PITCH_LIM");
-
- return OK;
-}
-
-static int parameters_update(const struct fw_pos_control_param_handles *h, struct fw_pos_control_params *p)
-{
- param_get(h->heading_p, &(p->heading_p));
- param_get(h->headingr_p, &(p->headingr_p));
- param_get(h->headingr_i, &(p->headingr_i));
- param_get(h->headingr_lim, &(p->headingr_lim));
- param_get(h->xtrack_p, &(p->xtrack_p));
- param_get(h->altitude_p, &(p->altitude_p));
- param_get(h->roll_lim, &(p->roll_lim));
- param_get(h->pitch_lim, &(p->pitch_lim));
-
- return OK;
-}
-
-
-/* Main Thread */
-int fixedwing_pos_control_thread_main(int argc, char *argv[])
-{
- /* read arguments */
- bool verbose = false;
-
- for (int i = 1; i < argc; i++) {
- if (strcmp(argv[i], "-v") == 0 || strcmp(argv[i], "--verbose") == 0) {
- verbose = true;
- }
- }
-
- /* welcome user */
- printf("[fixedwing pos control] started\n");
-
- /* declare and safely initialize all structs */
- struct vehicle_global_position_s global_pos;
- memset(&global_pos, 0, sizeof(global_pos));
- struct vehicle_global_position_s start_pos; // Temporary variable, replace with
- memset(&start_pos, 0, sizeof(start_pos)); // previous waypoint when available
- struct vehicle_global_position_setpoint_s global_setpoint;
- memset(&global_setpoint, 0, sizeof(global_setpoint));
- struct vehicle_attitude_s att;
- memset(&att, 0, sizeof(att));
- struct crosstrack_error_s xtrack_err;
- memset(&xtrack_err, 0, sizeof(xtrack_err));
- struct parameter_update_s param_update;
- memset(&param_update, 0, sizeof(param_update));
-
- /* output structs */
- struct vehicle_attitude_setpoint_s attitude_setpoint;
- memset(&attitude_setpoint, 0, sizeof(attitude_setpoint));
-
- /* publish attitude setpoint */
- attitude_setpoint.roll_body = 0.0f;
- attitude_setpoint.pitch_body = 0.0f;
- attitude_setpoint.yaw_body = 0.0f;
- attitude_setpoint.thrust = 0.0f;
- orb_advert_t attitude_setpoint_pub = orb_advertise(ORB_ID(vehicle_attitude_setpoint), &attitude_setpoint);
-
- /* subscribe */
- int global_pos_sub = orb_subscribe(ORB_ID(vehicle_global_position));
- int global_setpoint_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint));
- int att_sub = orb_subscribe(ORB_ID(vehicle_attitude));
- int param_sub = orb_subscribe(ORB_ID(parameter_update));
-
- /* Setup of loop */
- struct pollfd fds[2] = {
- { .fd = param_sub, .events = POLLIN },
- { .fd = att_sub, .events = POLLIN }
- };
- bool global_sp_updated_set_once = false;
-
- float psi_track = 0.0f;
-
- int counter = 0;
-
- struct fw_pos_control_params p;
- struct fw_pos_control_param_handles h;
-
- PID_t heading_controller;
- PID_t heading_rate_controller;
- PID_t offtrack_controller;
- PID_t altitude_controller;
-
- parameters_init(&h);
- parameters_update(&h, &p);
- pid_init(&heading_controller, p.heading_p, 0.0f, 0.0f, 0.0f, 10000.0f, PID_MODE_DERIVATIV_NONE, 0.0f); //arbitrary high limit
- pid_init(&heading_rate_controller, p.headingr_p, p.headingr_i, 0.0f, 0.0f, p.roll_lim, PID_MODE_DERIVATIV_NONE, 0.0f);
- pid_init(&altitude_controller, p.altitude_p, 0.0f, 0.0f, 0.0f, p.pitch_lim, PID_MODE_DERIVATIV_NONE, 0.0f);
- pid_init(&offtrack_controller, p.xtrack_p, 0.0f, 0.0f, 0.0f , 60.0f * M_DEG_TO_RAD, PID_MODE_DERIVATIV_NONE, 0.0f); //TODO: remove hardcoded value
-
- /* error and performance monitoring */
- perf_counter_t fw_interval_perf = perf_alloc(PC_INTERVAL, "fixedwing_pos_control_interval");
- perf_counter_t fw_err_perf = perf_alloc(PC_COUNT, "fixedwing_pos_control_err");
-
- while (!thread_should_exit) {
- /* wait for a sensor update, check for exit condition every 500 ms */
- int ret = poll(fds, 2, 500);
-
- if (ret < 0) {
- /* poll error, count it in perf */
- perf_count(fw_err_perf);
-
- } else if (ret == 0) {
- /* no return value, ignore */
- } else {
-
- /* only update parameters if they changed */
- if (fds[0].revents & POLLIN) {
- /* read from param to clear updated flag */
- struct parameter_update_s update;
- orb_copy(ORB_ID(parameter_update), param_sub, &update);
-
- /* update parameters from storage */
- parameters_update(&h, &p);
- pid_set_parameters(&heading_controller, p.heading_p, 0, 0, 0, 10000.0f); //arbitrary high limit
- pid_set_parameters(&heading_rate_controller, p.headingr_p, p.headingr_i, 0, 0, p.roll_lim);
- pid_set_parameters(&altitude_controller, p.altitude_p, 0, 0, 0, p.pitch_lim);
- pid_set_parameters(&offtrack_controller, p.xtrack_p, 0, 0, 0, 60.0f * M_DEG_TO_RAD); //TODO: remove hardcoded value
- }
-
- /* only run controller if attitude changed */
- if (fds[1].revents & POLLIN) {
-
-
- static uint64_t last_run = 0;
- const float deltaT = (hrt_absolute_time() - last_run) / 1000000.0f;
- last_run = hrt_absolute_time();
-
- /* check if there is a new position or setpoint */
- bool pos_updated;
- orb_check(global_pos_sub, &pos_updated);
- bool global_sp_updated;
- orb_check(global_setpoint_sub, &global_sp_updated);
-
- /* load local copies */
- orb_copy(ORB_ID(vehicle_attitude), att_sub, &att);
-
- if (pos_updated) {
- orb_copy(ORB_ID(vehicle_global_position), global_pos_sub, &global_pos);
- }
-
- if (global_sp_updated) {
- orb_copy(ORB_ID(vehicle_global_position_setpoint), global_setpoint_sub, &global_setpoint);
- start_pos = global_pos; //for now using the current position as the startpoint (= approx. last waypoint because the setpoint switch occurs at the waypoint)
- global_sp_updated_set_once = true;
- psi_track = get_bearing_to_next_waypoint((double)global_pos.lat / (double)1e7d, (double)global_pos.lon / (double)1e7d,
- (double)global_setpoint.lat / (double)1e7d, (double)global_setpoint.lon / (double)1e7d);
-
- printf("next wp direction: %0.4f\n", (double)psi_track);
- }
-
- /* Simple Horizontal Control */
- if (global_sp_updated_set_once) {
- // if (counter % 100 == 0)
- // printf("lat_sp %d, ln_sp %d, lat: %d, lon: %d\n", global_setpoint.lat, global_setpoint.lon, global_pos.lat, global_pos.lon);
-
- /* calculate crosstrack error */
- // Only the case of a straight line track following handled so far
- int distance_res = get_distance_to_line(&xtrack_err, (double)global_pos.lat / (double)1e7d, (double)global_pos.lon / (double)1e7d,
- (double)start_pos.lat / (double)1e7d, (double)start_pos.lon / (double)1e7d,
- (double)global_setpoint.lat / (double)1e7d, (double)global_setpoint.lon / (double)1e7d);
-
- // XXX what is xtrack_err.past_end?
- if (distance_res == OK /*&& !xtrack_err.past_end*/) {
-
- float delta_psi_c = pid_calculate(&offtrack_controller, 0, xtrack_err.distance, 0.0f, 0.0f); //p.xtrack_p * xtrack_err.distance
-
- float psi_c = psi_track + delta_psi_c;
- float psi_e = psi_c - att.yaw;
-
- /* wrap difference back onto -pi..pi range */
- psi_e = _wrap_pi(psi_e);
-
- if (verbose) {
- printf("xtrack_err.distance %.4f ", (double)xtrack_err.distance);
- printf("delta_psi_c %.4f ", (double)delta_psi_c);
- printf("psi_c %.4f ", (double)psi_c);
- printf("att.yaw %.4f ", (double)att.yaw);
- printf("psi_e %.4f ", (double)psi_e);
- }
-
- /* calculate roll setpoint, do this artificially around zero */
- float delta_psi_rate_c = pid_calculate(&heading_controller, psi_e, 0.0f, 0.0f, 0.0f);
- float psi_rate_track = 0; //=V_gr/r_track , this will be needed for implementation of arc following
- float psi_rate_c = delta_psi_rate_c + psi_rate_track;
-
- /* limit turn rate */
- if (psi_rate_c > p.headingr_lim) {
- psi_rate_c = p.headingr_lim;
-
- } else if (psi_rate_c < -p.headingr_lim) {
- psi_rate_c = -p.headingr_lim;
- }
-
- float psi_rate_e = psi_rate_c - att.yawspeed;
-
- // XXX sanity check: Assume 10 m/s stall speed and no stall condition
- float ground_speed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy);
-
- if (ground_speed < 10.0f) {
- ground_speed = 10.0f;
- }
-
- float psi_rate_e_scaled = psi_rate_e * ground_speed / 9.81f; //* V_gr / g
-
- attitude_setpoint.roll_body = pid_calculate(&heading_rate_controller, psi_rate_e_scaled, 0.0f, 0.0f, deltaT);
-
- if (verbose) {
- printf("psi_rate_c %.4f ", (double)psi_rate_c);
- printf("psi_rate_e_scaled %.4f ", (double)psi_rate_e_scaled);
- printf("rollbody %.4f\n", (double)attitude_setpoint.roll_body);
- }
-
- if (verbose && counter % 100 == 0)
- printf("xtrack_err.distance: %0.4f, delta_psi_c: %0.4f\n", xtrack_err.distance, delta_psi_c);
-
- } else {
- if (verbose && counter % 100 == 0)
- printf("distance_res: %d, past_end %d\n", distance_res, xtrack_err.past_end);
- }
-
- /* Very simple Altitude Control */
- if (pos_updated) {
-
- //TODO: take care of relative vs. ab. altitude
- attitude_setpoint.pitch_body = pid_calculate(&altitude_controller, global_setpoint.altitude, global_pos.alt, 0.0f, 0.0f);
-
- }
-
- // XXX need speed control
- attitude_setpoint.thrust = 0.7f;
-
- /* publish the attitude setpoint */
- orb_publish(ORB_ID(vehicle_attitude_setpoint), attitude_setpoint_pub, &attitude_setpoint);
-
- /* measure in what intervals the controller runs */
- perf_count(fw_interval_perf);
-
- counter++;
-
- } else {
- // XXX no setpoint, decent default needed (loiter?)
- }
- }
- }
- }
-
- printf("[fixedwing_pos_control] exiting.\n");
- thread_running = false;
-
-
- close(attitude_setpoint_pub);
-
- fflush(stdout);
- exit(0);
-
- return 0;
-
-}
-
-/* Startup Functions */
-
-static void
-usage(const char *reason)
-{
- if (reason)
- fprintf(stderr, "%s\n", reason);
-
- fprintf(stderr, "usage: fixedwing_pos_control {start|stop|status}\n\n");
- exit(1);
-}
-
-/**
- * The deamon app only briefly exists to start
- * the background job. The stack size assigned in the
- * Makefile does only apply to this management task.
- *
- * The actual stack size should be set in the call
- * to task_create().
- */
-int fixedwing_pos_control_main(int argc, char *argv[])
-{
- if (argc < 1)
- usage("missing command");
-
- if (!strcmp(argv[1], "start")) {
-
- if (thread_running) {
- printf("fixedwing_pos_control already running\n");
- /* this is not an error */
- exit(0);
- }
-
- thread_should_exit = false;
- deamon_task = task_spawn_cmd("fixedwing_pos_control",
- SCHED_DEFAULT,
- SCHED_PRIORITY_MAX - 20,
- 2048,
- fixedwing_pos_control_thread_main,
- (argv) ? (const char **)&argv[2] : (const char **)NULL);
- thread_running = true;
- exit(0);
- }
-
- if (!strcmp(argv[1], "stop")) {
- thread_should_exit = true;
- exit(0);
- }
-
- if (!strcmp(argv[1], "status")) {
- if (thread_running) {
- printf("\tfixedwing_pos_control is running\n");
-
- } else {
- printf("\tfixedwing_pos_control not started\n");
- }
-
- exit(0);
- }
-
- usage("unrecognized command");
- exit(1);
-}