diff options
Diffstat (limited to 'src/modules/px4iofirmware')
-rw-r--r-- | src/modules/px4iofirmware/serial.c | 44 |
1 files changed, 34 insertions, 10 deletions
diff --git a/src/modules/px4iofirmware/serial.c b/src/modules/px4iofirmware/serial.c index 2f3184623..94d7407df 100644 --- a/src/modules/px4iofirmware/serial.c +++ b/src/modules/px4iofirmware/serial.c @@ -221,6 +221,10 @@ rx_handle_packet(void) static void rx_dma_callback(DMA_HANDLE handle, uint8_t status, void *arg) { + /* + * We are here because DMA completed, or UART reception stopped and + * we think we have a packet in the buffer. + */ perf_begin(pc_txns); /* disable UART DMA */ @@ -235,7 +239,7 @@ rx_dma_callback(DMA_HANDLE handle, uint8_t status, void *arg) /* re-set DMA for reception first, so we are ready to receive before we start sending */ dma_reset(); - /* send the reply to the previous request */ + /* send the reply to the just-processed request */ dma_packet.crc = 0; dma_packet.crc = crc_packet(&dma_packet); stm32_dmasetup( @@ -256,6 +260,8 @@ rx_dma_callback(DMA_HANDLE handle, uint8_t status, void *arg) static int serial_interrupt(int irq, void *context) { + static bool abort_on_idle = false; + uint32_t sr = rSR; /* get UART status register */ (void)rDR; /* required to clear any of the interrupt status that brought us here */ @@ -271,28 +277,46 @@ serial_interrupt(int irq, void *context) if (sr & USART_SR_FE) perf_count(pc_fe); - /* reset DMA state machine back to listening-for-packet */ - dma_reset(); + /* send a line break - this will abort transmission/reception on the other end */ + rCR1 |= USART_CR1_SBK; - /* don't attempt to handle IDLE if it's set - things went bad */ - return 0; + /* when the line goes idle, abort rather than look at the packet */ + abort_on_idle = true; } if (sr & USART_SR_IDLE) { - /* the packet might have been short - go check */ + /* + * If we saw an error, don't bother looking at the packet - it should have + * been aborted by the sender and will definitely be bad. Get the DMA reconfigured + * ready for their retry. + */ + if (abort_on_idle) { + + abort_on_idle = false; + dma_reset(); + return 0; + } + + /* + * The sender has stopped sending - this is probably the end of a packet. + * Check the received length against the length in the header to see if + * we have something that looks like a packet. + */ unsigned length = sizeof(dma_packet) - stm32_dmaresidual(rx_dma); if ((length < 1) || (length < PKT_SIZE(dma_packet))) { + + /* it was too short - possibly truncated */ perf_count(pc_badidle); return 0; } + /* + * Looks like we received a packet. Stop the DMA and go process the + * packet. + */ perf_count(pc_idle); - - /* stop the receive DMA */ stm32_dmastop(rx_dma); - - /* and treat this like DMA completion */ rx_dma_callback(rx_dma, DMA_STATUS_TCIF, NULL); } |