diff options
Diffstat (limited to 'src/modules/sensors/sensor_params.c')
-rw-r--r-- | src/modules/sensors/sensor_params.c | 52 |
1 files changed, 50 insertions, 2 deletions
diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index c8a3ec8f0..7ce6ef5ef 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -194,16 +194,25 @@ PARAM_DEFINE_FLOAT(SENS_ACC_ZSCALE, 1.0f); /** * Differential pressure sensor offset * + * The offset (zero-reading) in Pascal + * * @group Sensor Calibration */ PARAM_DEFINE_FLOAT(SENS_DPRES_OFF, 0.0f); /** - * Differential pressure sensor analog enabled + * Differential pressure sensor analog scaling + * + * Pick the appropriate scaling from the datasheet. + * this number defines the (linear) conversion from voltage + * to Pascal (pa). For the MPXV7002DP this is 1000. + * + * NOTE: If the sensor always registers zero, try switching + * the static and dynamic tubes. * * @group Sensor Calibration */ -PARAM_DEFINE_INT32(SENS_DPRES_ANA, 0); +PARAM_DEFINE_FLOAT(SENS_DPRES_ANSC, 0); /** @@ -283,6 +292,19 @@ PARAM_DEFINE_FLOAT(SENS_BOARD_Z_OFF, 0.0f); */ PARAM_DEFINE_INT32(SENS_EXT_MAG_ROT, 0); +/** +* Set usage of external magnetometer +* +* * Set to 0 (default) to auto-detect (will try to get the external as primary) +* * Set to 1 to force the external magnetometer as primary +* * Set to 2 to force the internal magnetometer as primary +* +* @min 0 +* @max 2 +* @group Sensor Calibration +*/ +PARAM_DEFINE_INT32(SENS_EXT_MAG, 0); + /** * RC Channel 1 Minimum @@ -665,6 +687,15 @@ PARAM_DEFINE_INT32(RC_MAP_LOITER_SW, 0); PARAM_DEFINE_INT32(RC_MAP_ACRO_SW, 0); /** + * Offboard switch channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_MAP_OFFB_SW, 0); + +/** * Flaps channel mapping. * * @min 0 @@ -811,3 +842,20 @@ PARAM_DEFINE_FLOAT(RC_LOITER_TH, 0.5f); * */ PARAM_DEFINE_FLOAT(RC_ACRO_TH, 0.5f); + + +/** + * Threshold for selecting offboard mode + * + * min:-1 + * max:+1 + * + * 0-1 indicate where in the full channel range the threshold sits + * 0 : min + * 1 : max + * sign indicates polarity of comparison + * positive : true when channel>th + * negative : true when channel<th + * + */ +PARAM_DEFINE_FLOAT(RC_OFFB_TH, 0.5f); |