diff options
Diffstat (limited to 'src/modules/uORB/topics/manual_control_setpoint.h')
| -rw-r--r-- | src/modules/uORB/topics/manual_control_setpoint.h | 111 |
1 files changed, 0 insertions, 111 deletions
diff --git a/src/modules/uORB/topics/manual_control_setpoint.h b/src/modules/uORB/topics/manual_control_setpoint.h deleted file mode 100644 index 50b7bd9e5..000000000 --- a/src/modules/uORB/topics/manual_control_setpoint.h +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file manual_control_setpoint.h - * Definition of the manual_control_setpoint uORB topic. - */ - -#ifndef TOPIC_MANUAL_CONTROL_SETPOINT_H_ -#define TOPIC_MANUAL_CONTROL_SETPOINT_H_ - -#include <stdint.h> -#include "../uORB.h" - -/** - * Switch position - */ -typedef enum { - SWITCH_POS_NONE = 0, /**< switch is not mapped */ - SWITCH_POS_ON, /**< switch activated (value = 1) */ - SWITCH_POS_MIDDLE, /**< middle position (value = 0) */ - SWITCH_POS_OFF /**< switch not activated (value = -1) */ -} switch_pos_t; - -/** - * @addtogroup topics - * @{ - */ - -struct manual_control_setpoint_s { - uint64_t timestamp; - - /** - * Any of the channels may not be available and be set to NaN - * to indicate that it does not contain valid data. - * The variable names follow the definition of the - * MANUAL_CONTROL mavlink message. - * The default range is from -1 to 1 (mavlink message -1000 to 1000) - * The range for the z variable is defined from 0 to 1. (The z field of - * the MANUAL_CONTROL mavlink message is defined from -1000 to 1000) - */ - float x; /**< stick position in x direction -1..1 - in general corresponds to forward/back motion or pitch of vehicle, - in general a positive value means forward or negative pitch and - a negative value means backward or positive pitch */ - float y; /**< stick position in y direction -1..1 - in general corresponds to right/left motion or roll of vehicle, - in general a positive value means right or positive roll and - a negative value means left or negative roll */ - float z; /**< throttle stick position 0..1 - in general corresponds to up/down motion or thrust of vehicle, - in general the value corresponds to the demanded throttle by the user, - if the input is used for setting the setpoint of a vertical position - controller any value > 0.5 means up and any value < 0.5 means down */ - float r; /**< yaw stick/twist positon, -1..1 - in general corresponds to the righthand rotation around the vertical - (downwards) axis of the vehicle */ - float flaps; /**< flap position */ - float aux1; /**< default function: camera yaw / azimuth */ - float aux2; /**< default function: camera pitch / tilt */ - float aux3; /**< default function: camera trigger */ - float aux4; /**< default function: camera roll */ - float aux5; /**< default function: payload drop */ - - switch_pos_t mode_switch; /**< main mode 3 position switch (mandatory): _MANUAL_, ASSIST, AUTO */ - switch_pos_t return_switch; /**< return to launch 2 position switch (mandatory): _NORMAL_, RTL */ - switch_pos_t posctl_switch; /**< position control 2 position switch (optional): _ALTCTL_, POSCTL */ - switch_pos_t loiter_switch; /**< loiter 2 position switch (optional): _MISSION_, LOITER */ - switch_pos_t acro_switch; /**< acro 2 position switch (optional): _MANUAL_, ACRO */ - switch_pos_t offboard_switch; /**< offboard 2 position switch (optional): _NORMAL_, OFFBOARD */ -}; - -/** - * @} - */ - -/* register this as object request broker structure */ -ORB_DECLARE(manual_control_setpoint); - -#endif |