diff options
Diffstat (limited to 'src/modules/uORB/topics/vehicle_command.h')
| -rw-r--r-- | src/modules/uORB/topics/vehicle_command.h | 22 |
1 files changed, 15 insertions, 7 deletions
diff --git a/src/modules/uORB/topics/vehicle_command.h b/src/modules/uORB/topics/vehicle_command.h index 7db33d98b..f264accbb 100644 --- a/src/modules/uORB/topics/vehicle_command.h +++ b/src/modules/uORB/topics/vehicle_command.h @@ -1,9 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> + * Copyright (C) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -37,6 +34,10 @@ /** * @file vehicle_command.h * Definition of the vehicle command uORB topic. + * + * @author Thomas Gubler <thomasgubler@student.ethz.ch> + * @author Julian Oes <joes@student.ethz.ch> + * @author Lorenz Meier <lm@inf.ethz.ch> */ #ifndef TOPIC_VEHICLE_COMMAND_H_ @@ -52,6 +53,9 @@ * but can contain additional ones. */ enum VEHICLE_CMD { + VEHICLE_CMD_CUSTOM_0 = 0, /* test command */ + VEHICLE_CMD_CUSTOM_1 = 1, /* test command */ + VEHICLE_CMD_CUSTOM_2 = 2, /* test command */ VEHICLE_CMD_NAV_WAYPOINT = 16, /* Navigate to MISSION. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Acceptance radius in meters (if the sphere with this radius is hit, the MISSION counts as reached)| 0 to pass through the WP, if > 0 radius in meters to pass by WP. Positive value for clockwise orbit, negative value for counter-clockwise orbit. Allows trajectory control.| Desired yaw angle at MISSION (rotary wing)| Latitude| Longitude| Altitude| */ VEHICLE_CMD_NAV_LOITER_UNLIM = 17, /* Loiter around this MISSION an unlimited amount of time |Empty| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ VEHICLE_CMD_NAV_LOITER_TURNS = 18, /* Loiter around this MISSION for X turns |Turns| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ @@ -61,6 +65,9 @@ enum VEHICLE_CMD { VEHICLE_CMD_NAV_TAKEOFF = 22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ VEHICLE_CMD_NAV_ROI = 80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ VEHICLE_CMD_NAV_PATHPLANNING = 81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + VEHICLE_CMD_NAV_GUIDED_LIMITS=90, /* set limits for external control |timeout - maximum time (in seconds) that external controller will be allowed to control vehicle. 0 means no timeout| absolute altitude min (in meters, WGS84) - if vehicle moves below this alt, the command will be aborted and the mission will continue. 0 means no lower altitude limit| absolute altitude max (in meters)- if vehicle moves above this alt, the command will be aborted and the mission will continue. 0 means no upper altitude limit| horizontal move limit (in meters, WGS84) - if vehicle moves more than this distance from it's location at the moment the command was executed, the command will be aborted and the mission will continue. 0 means no horizontal altitude limit| Empty| Empty| Empty| */ + VEHICLE_CMD_NAV_GUIDED_MASTER=91, /* set id of master controller |System ID| Component ID| Empty| Empty| Empty| Empty| Empty| */ + VEHICLE_CMD_NAV_GUIDED_ENABLE=92, /* hand control over to an external controller |On / Off (> 0.5f on)| Empty| Empty| Empty| Empty| Empty| Empty| */ VEHICLE_CMD_NAV_LAST = 95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ VEHICLE_CMD_CONDITION_DELAY = 112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ VEHICLE_CMD_CONDITION_CHANGE_ALT = 113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ @@ -87,7 +94,8 @@ enum VEHICLE_CMD { VEHICLE_CMD_MISSION_START = 300, /* start running a mission |first_item: the first mission item to run| last_item: the last mission item to run (after this item is run, the mission ends)| */ VEHICLE_CMD_COMPONENT_ARM_DISARM = 400, /* Arms / Disarms a component |1 to arm, 0 to disarm| */ VEHICLE_CMD_START_RX_PAIR = 500, /* Starts receiver pairing |0:Spektrum| 0:Spektrum DSM2, 1:Spektrum DSMX| */ - VEHICLE_CMD_ENUM_END = 501, /* | */ + VEHICLE_CMD_PAYLOAD_PREPARE_DEPLOY = 30001, /**< Prepare a payload deployment in the flight plan */ + VEHICLE_CMD_PAYLOAD_CONTROL_DEPLOY = 30002 /**< Control a pre-programmed payload deployment */ }; /** @@ -115,8 +123,8 @@ struct vehicle_command_s { float param2; /**< Parameter 2, as defined by MAVLink VEHICLE_CMD enum. */ float param3; /**< Parameter 3, as defined by MAVLink VEHICLE_CMD enum. */ float param4; /**< Parameter 4, as defined by MAVLink VEHICLE_CMD enum. */ - float param5; /**< Parameter 5, as defined by MAVLink VEHICLE_CMD enum. */ - float param6; /**< Parameter 6, as defined by MAVLink VEHICLE_CMD enum. */ + double param5; /**< Parameter 5, as defined by MAVLink VEHICLE_CMD enum. */ + double param6; /**< Parameter 6, as defined by MAVLink VEHICLE_CMD enum. */ float param7; /**< Parameter 7, as defined by MAVLink VEHICLE_CMD enum. */ enum VEHICLE_CMD command; /**< Command ID, as defined MAVLink by VEHICLE_CMD enum. */ uint8_t target_system; /**< System which should execute the command */ |