diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 24 | ||||
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 194 | ||||
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 28 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.h | 1 | ||||
-rw-r--r-- | src/modules/px4iofirmware/registers.c | 1 | ||||
-rw-r--r-- | src/modules/sensors/sensor_params.c | 28 | ||||
-rw-r--r-- | src/modules/sensors/sensors.cpp | 30 |
7 files changed, 151 insertions, 155 deletions
diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 82f3ba044..a30bfb2de 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -944,8 +944,23 @@ PX4IO::task_main() int pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_VBATT_SCALE, &scaling, 1); if (pret != OK) { - log("voltage scaling upload failed"); + log("vscale upload failed"); } + + /* send RC throttle failsafe value to IO */ + int32_t failsafe_param_val; + param_t failsafe_param = param_find("RC_FAILS_THR"); + + if (failsafe_param > 0) + + param_get(failsafe_param, &failsafe_param_val); + uint16_t failsafe_thr = failsafe_param_val; + pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RC_THR_FAILSAFE_US, &failsafe_thr, 1); + if (pret != OK) { + log("failsafe upload failed"); + } + } + } } @@ -1479,10 +1494,11 @@ PX4IO::io_publish_raw_rc() } else { rc_val.input_source = RC_INPUT_SOURCE_UNKNOWN; - /* we do not know the RC input, only publish if RC OK flag is set */ - /* if no raw RC, just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK)) + /* only keep publishing RC input if we ever got a valid input */ + if (_rc_last_valid == 0) { + /* we have never seen valid RC signals, abort */ return OK; + } } /* lazily advertise on first publication */ diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 941500f0d..56c5aa005 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -134,8 +134,6 @@ controls_tick() { perf_begin(c_gather_sbus); - bool sbus_status = (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_SBUS); - bool sbus_failsafe, sbus_frame_drop; bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &sbus_failsafe, &sbus_frame_drop, PX4IO_RC_INPUT_CHANNELS); @@ -201,94 +199,104 @@ controls_tick() { /* update RC-received timestamp */ system_state.rc_channels_timestamp_received = hrt_absolute_time(); - /* do not command anything in failsafe, kick in the RC loss counter */ - if (!(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { - - /* update RC-received timestamp */ - system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received; - - /* map raw inputs to mapped inputs */ - /* XXX mapping should be atomic relative to protocol */ - for (unsigned i = 0; i < r_raw_rc_count; i++) { - - /* map the input channel */ - uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; - - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { - - uint16_t raw = r_raw_rc_values[i]; - - int16_t scaled; - - /* - * 1) Constrain to min/max values, as later processing depends on bounds. - */ - if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) - raw = conf[PX4IO_P_RC_CONFIG_MIN]; - if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) - raw = conf[PX4IO_P_RC_CONFIG_MAX]; - - /* - * 2) Scale around the mid point differently for lower and upper range. - * - * This is necessary as they don't share the same endpoints and slope. - * - * First normalize to 0..1 range with correct sign (below or above center), - * then scale to 20000 range (if center is an actual center, -10000..10000, - * if parameters only support half range, scale to 10000 range, e.g. if - * center == min 0..10000, if center == max -10000..0). - * - * As the min and max bounds were enforced in step 1), division by zero - * cannot occur, as for the case of center == min or center == max the if - * statement is mutually exclusive with the arithmetic NaN case. - * - * DO NOT REMOVE OR ALTER STEP 1! - */ - if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); - - } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); - - } else { - /* in the configured dead zone, output zero */ - scaled = 0; - } - - /* invert channel if requested */ - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) - scaled = -scaled; + /* update RC-received timestamp */ + system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received; + + /* map raw inputs to mapped inputs */ + /* XXX mapping should be atomic relative to protocol */ + for (unsigned i = 0; i < r_raw_rc_count; i++) { + + /* map the input channel */ + uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; + + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { + + uint16_t raw = r_raw_rc_values[i]; + + int16_t scaled; + + /* + * 1) Constrain to min/max values, as later processing depends on bounds. + */ + if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) + raw = conf[PX4IO_P_RC_CONFIG_MIN]; + if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) + raw = conf[PX4IO_P_RC_CONFIG_MAX]; + + /* + * 2) Scale around the mid point differently for lower and upper range. + * + * This is necessary as they don't share the same endpoints and slope. + * + * First normalize to 0..1 range with correct sign (below or above center), + * then scale to 20000 range (if center is an actual center, -10000..10000, + * if parameters only support half range, scale to 10000 range, e.g. if + * center == min 0..10000, if center == max -10000..0). + * + * As the min and max bounds were enforced in step 1), division by zero + * cannot occur, as for the case of center == min or center == max the if + * statement is mutually exclusive with the arithmetic NaN case. + * + * DO NOT REMOVE OR ALTER STEP 1! + */ + if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); + + } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); + + } else { + /* in the configured dead zone, output zero */ + scaled = 0; + } - /* and update the scaled/mapped version */ - unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - if (mapped < PX4IO_CONTROL_CHANNELS) { + /* invert channel if requested */ + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) { + scaled = -scaled; + } - /* invert channel if pitch - pulling the lever down means pitching up by convention */ - if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ - scaled = -scaled; + /* and update the scaled/mapped version */ + unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; + if (mapped < PX4IO_CONTROL_CHANNELS) { - r_rc_values[mapped] = SIGNED_TO_REG(scaled); - assigned_channels |= (1 << mapped); + /* invert channel if pitch - pulling the lever down means pitching up by convention */ + if (mapped == 1) { + /* roll, pitch, yaw, throttle, override is the standard order */ + scaled = -scaled; + } + if (mapped == 3 && r_setup_rc_thr_failsafe) { + /* throttle failsafe detection */ + if (((raw < conf[PX4IO_P_RC_CONFIG_MIN]) && (raw < r_setup_rc_thr_failsafe)) || + ((raw > conf[PX4IO_P_RC_CONFIG_MAX]) && (raw > r_setup_rc_thr_failsafe))) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_FAILSAFE; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + } } + + r_rc_values[mapped] = SIGNED_TO_REG(scaled); + assigned_channels |= (1 << mapped); + } } + } - /* set un-assigned controls to zero */ - for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { - if (!(assigned_channels & (1 << i))) - r_rc_values[i] = 0; + /* set un-assigned controls to zero */ + for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { + if (!(assigned_channels & (1 << i))) { + r_rc_values[i] = 0; } + } - /* set RC OK flag, as we got an update */ - r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; + /* set RC OK flag, as we got an update */ + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; - /* if we have enough channels (5) to control the vehicle, the mapping is ok */ - if (assigned_channels > 4) { - r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK; - } else { - r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK); - } + /* if we have enough channels (5) to control the vehicle, the mapping is ok */ + if (assigned_channels > 4) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK); } /* @@ -316,8 +324,13 @@ controls_tick() { * Handle losing RC input */ - /* this kicks in if the receiver is gone or the system went to failsafe */ - if (rc_input_lost || (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { + /* if we are in failsafe, clear the override flag */ + if (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) { + r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_OVERRIDE); + } + + /* this kicks in if the receiver is gone, but there is not on failsafe (indicated by separate flag) */ + if (rc_input_lost) { /* Clear the RC input status flag, clear manual override flag */ r_status_flags &= ~( PX4IO_P_STATUS_FLAGS_OVERRIDE | @@ -326,27 +339,24 @@ controls_tick() { /* Mark all channels as invalid, as we just lost the RX */ r_rc_valid = 0; + /* Set raw channel count to zero */ + r_raw_rc_count = 0; + /* Set the RC_LOST alarm */ r_status_alarms |= PX4IO_P_STATUS_ALARMS_RC_LOST; } - /* this kicks in if the receiver is completely gone */ - if (rc_input_lost) { - - /* Set channel count to zero */ - r_raw_rc_count = 0; - } - /* * Check for manual override. * * The PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK flag must be set, and we - * must have R/C input. + * must have R/C input (NO FAILSAFE!). * Override is enabled if either the hardcoded channel / value combination * is selected, or the AP has requested it. */ if ((r_setup_arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) && - (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK)) { + (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && + !(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { bool override = false; @@ -369,10 +379,10 @@ controls_tick() { mixer_tick(); } else { - r_status_flags &= ~PX4IO_P_STATUS_FLAGS_OVERRIDE; + r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_OVERRIDE); } } else { - r_status_flags &= ~PX4IO_P_STATUS_FLAGS_OVERRIDE; + r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_OVERRIDE); } } diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index d48c6c529..a978d483a 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -164,10 +164,10 @@ /* setup page */ #define PX4IO_PAGE_SETUP 50 #define PX4IO_P_SETUP_FEATURES 0 -#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /* enable S.Bus v1 output */ -#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /* enable S.Bus v2 output */ -#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /* enable PWM RSSI parsing */ -#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /* enable ADC RSSI parsing */ +#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /**< enable S.Bus v1 output */ +#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /**< enable S.Bus v2 output */ +#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /**< enable PWM RSSI parsing */ +#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /**< enable ADC RSSI parsing */ #define PX4IO_P_SETUP_ARMING 1 /* arming controls */ #define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */ @@ -201,13 +201,15 @@ enum { /* DSM bind states */ dsm_bind_send_pulses, dsm_bind_reinit_uart }; - /* 8 */ -#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ + /* 8 */ +#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ -#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ -#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ +#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ +#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ -#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ +#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ + /* 12 occupied by CRC */ +#define PX4IO_P_SETUP_RC_THR_FAILSAFE_US 13 /**< the throttle failsafe pulse length in microseconds */ /* autopilot control values, -10000..10000 */ #define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */ @@ -217,10 +219,10 @@ enum { /* DSM bind states */ #define PX4IO_P_CONTROLS_GROUP_3 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 3) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ #define PX4IO_P_CONTROLS_GROUP_VALID 64 -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /* group 0 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /* group 1 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /* group 2 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /* group 3 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /**< group 0 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /**< group 1 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /**< group 2 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /**< group 3 is valid / received */ /* raw text load to the mixer parser - ignores offset */ #define PX4IO_PAGE_MIXERLOAD 52 diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 54c5663a5..88ad79398 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -108,6 +108,7 @@ extern uint16_t r_page_servo_disarmed[]; /* PX4IO_PAGE_DISARMED_PWM */ #ifdef CONFIG_ARCH_BOARD_PX4IO_V1 #define r_setup_relays r_page_setup[PX4IO_P_SETUP_RELAYS] #endif +#define r_setup_rc_thr_failsafe r_page_setup[PX4IO_P_SETUP_RC_THR_FAILSAFE_US]; #define r_control_values (&r_page_controls[0]) diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 97d25bbfa..6752e7b4b 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -169,6 +169,7 @@ volatile uint16_t r_page_setup[] = [PX4IO_P_SETUP_SET_DEBUG] = 0, [PX4IO_P_SETUP_REBOOT_BL] = 0, [PX4IO_P_SETUP_CRC ... (PX4IO_P_SETUP_CRC+1)] = 0, + [PX4IO_P_SETUP_RC_THR_FAILSAFE_US] = 0, }; #ifdef CONFIG_ARCH_BOARD_PX4IO_V2 diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 288c6e00a..14f7ac812 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -668,33 +668,11 @@ PARAM_DEFINE_FLOAT(RC_SCALE_PITCH, 0.6f); */ PARAM_DEFINE_FLOAT(RC_SCALE_YAW, 2.0f); - -/** - * Failsafe channel mapping. - * - * @min 0 - * @max 18 - * @group Radio Calibration - */ -PARAM_DEFINE_INT32(RC_FS_CH, 0); - -/** - * Failsafe channel mode. - * - * 0 = too low means signal loss, - * 1 = too high means signal loss - * - * @min 0 - * @max 1 - * @group Radio Calibration - */ -PARAM_DEFINE_INT32(RC_FS_MODE, 0); - /** * Failsafe channel PWM threshold. * - * @min 0 - * @max 1 + * @min 800 + * @max 2200 * @group Radio Calibration */ -PARAM_DEFINE_FLOAT(RC_FS_THR, 800); +PARAM_DEFINE_INT32(RC_FAILS_THR, 0); diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index f890c4c7f..c91006262 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -263,9 +263,7 @@ private: float rc_scale_yaw; float rc_scale_flaps; - int rc_fs_ch; - int rc_fs_mode; - float rc_fs_thr; + int32_t rc_fs_thr; float battery_voltage_scaling; float battery_current_scaling; @@ -313,8 +311,6 @@ private: param_t rc_scale_yaw; param_t rc_scale_flaps; - param_t rc_fs_ch; - param_t rc_fs_mode; param_t rc_fs_thr; param_t battery_voltage_scaling; @@ -531,9 +527,7 @@ Sensors::Sensors() : _parameter_handles.rc_scale_flaps = param_find("RC_SCALE_FLAPS"); /* RC failsafe */ - _parameter_handles.rc_fs_ch = param_find("RC_FS_CH"); - _parameter_handles.rc_fs_mode = param_find("RC_FS_MODE"); - _parameter_handles.rc_fs_thr = param_find("RC_FS_THR"); + _parameter_handles.rc_fs_thr = param_find("RC_FAILS_THR"); /* gyro offsets */ _parameter_handles.gyro_offset[0] = param_find("SENS_GYRO_XOFF"); @@ -689,8 +683,6 @@ Sensors::parameters_update() param_get(_parameter_handles.rc_scale_pitch, &(_parameters.rc_scale_pitch)); param_get(_parameter_handles.rc_scale_yaw, &(_parameters.rc_scale_yaw)); param_get(_parameter_handles.rc_scale_flaps, &(_parameters.rc_scale_flaps)); - param_get(_parameter_handles.rc_fs_ch, &(_parameters.rc_fs_ch)); - param_get(_parameter_handles.rc_fs_mode, &(_parameters.rc_fs_mode)); param_get(_parameter_handles.rc_fs_thr, &(_parameters.rc_fs_thr)); /* update RC function mappings */ @@ -1312,19 +1304,15 @@ Sensors::rc_poll() manual_control.aux5 = NAN; /* require at least four channels to consider the signal valid */ - if (rc_input.channel_count < 4) + if (rc_input.channel_count < 4) { return; + } - /* failsafe check */ - if (_parameters.rc_fs_ch != 0) { - if (_parameters.rc_fs_mode == 0) { - if (rc_input.values[_parameters.rc_fs_ch - 1] < _parameters.rc_fs_thr) - return; - - } else if (_parameters.rc_fs_mode == 1) { - if (rc_input.values[_parameters.rc_fs_ch - 1] > _parameters.rc_fs_thr) - return; - } + /* check for failsafe */ + if ((rc_input.rc_failsafe) || ((_parameters.rc_fs_thr != 0) && (((rc_input.values[_rc.function[THROTTLE]] < _parameters.min[i]) && (rc_input.values[_rc.function[THROTTLE]] < _parameters.rc_fs_thr)) + || ((rc_input.values[_rc.function[THROTTLE]] > _parameters.max[i]) && (rc_input.values[_rc.function[THROTTLE]] > _parameters.rc_fs_thr))))) { + /* do not publish manual control setpoints when there are none */ + return; } unsigned channel_limit = rc_input.channel_count; |