diff options
Diffstat (limited to 'src')
26 files changed, 414 insertions, 979 deletions
diff --git a/src/drivers/ets_airspeed/ets_airspeed.cpp b/src/drivers/ets_airspeed/ets_airspeed.cpp index 146a06e7c..2de7063ea 100644 --- a/src/drivers/ets_airspeed/ets_airspeed.cpp +++ b/src/drivers/ets_airspeed/ets_airspeed.cpp @@ -154,8 +154,9 @@ ETSAirspeed::collect() return ret; } - uint16_t diff_pres_pa = val[1] << 8 | val[0]; - if (diff_pres_pa == 0) { + uint16_t diff_pres_pa_raw = val[1] << 8 | val[0]; + uint16_t diff_pres_pa; + if (diff_pres_pa_raw == 0) { // a zero value means the pressure sensor cannot give us a // value. We need to return, and not report a value or the // caller could end up using this value as part of an @@ -165,10 +166,10 @@ ETSAirspeed::collect() return -1; } - if (diff_pres_pa < _diff_pres_offset + MIN_ACCURATE_DIFF_PRES_PA) { + if (diff_pres_pa_raw < _diff_pres_offset + MIN_ACCURATE_DIFF_PRES_PA) { diff_pres_pa = 0; } else { - diff_pres_pa -= _diff_pres_offset; + diff_pres_pa = diff_pres_pa_raw - _diff_pres_offset; } // Track maximum differential pressure measured (so we can work out top speed). @@ -183,6 +184,7 @@ ETSAirspeed::collect() // XXX we may want to smooth out the readings to remove noise. report.differential_pressure_filtered_pa = (float)diff_pres_pa; + report.differential_pressure_raw_pa = (float)diff_pres_pa_raw; report.temperature = -1000.0f; report.voltage = 0; report.max_differential_pressure_pa = _max_differential_pressure_pa; diff --git a/src/drivers/gps/gps.cpp b/src/drivers/gps/gps.cpp index 6195cd6ea..5342ccf78 100644 --- a/src/drivers/gps/gps.cpp +++ b/src/drivers/gps/gps.cpp @@ -448,10 +448,10 @@ GPS::print_info() warnx("port: %s, baudrate: %d, status: %s", _port, _baudrate, (_healthy) ? "OK" : "NOT OK"); if (_report.timestamp_position != 0) { - warnx("position lock: %dD, satellites: %d, last update: %fms ago", (int)_report.fix_type, - _report.satellites_visible, (hrt_absolute_time() - _report.timestamp_position) / 1000.0f); + warnx("position lock: %dD, satellites: %d, last update: %8.4fms ago", (int)_report.fix_type, + _report.satellites_visible, (double)(hrt_absolute_time() - _report.timestamp_position) / 1000.0f); warnx("lat: %d, lon: %d, alt: %d", _report.lat, _report.lon, _report.alt); - warnx("eph: %.2fm, epv: %.2fm", _report.eph_m, _report.epv_m); + warnx("eph: %.2fm, epv: %.2fm", (double)_report.eph_m, (double)_report.epv_m); warnx("rate position: \t%6.2f Hz", (double)_Helper->get_position_update_rate()); warnx("rate velocity: \t%6.2f Hz", (double)_Helper->get_velocity_update_rate()); warnx("rate publication:\t%6.2f Hz", (double)_rate); diff --git a/src/drivers/gps/gps_helper.cpp b/src/drivers/gps/gps_helper.cpp index 2360ff39b..3b92f1bf4 100644 --- a/src/drivers/gps/gps_helper.cpp +++ b/src/drivers/gps/gps_helper.cpp @@ -56,7 +56,7 @@ GPS_Helper::get_velocity_update_rate() return _rate_vel; } -float +void GPS_Helper::reset_update_rates() { _rate_count_vel = 0; @@ -64,7 +64,7 @@ GPS_Helper::reset_update_rates() _interval_rate_start = hrt_absolute_time(); } -float +void GPS_Helper::store_update_rates() { _rate_vel = _rate_count_vel / (((float)(hrt_absolute_time() - _interval_rate_start)) / 1000000.0f); diff --git a/src/drivers/gps/gps_helper.h b/src/drivers/gps/gps_helper.h index cfb9e0d43..d14a95afe 100644 --- a/src/drivers/gps/gps_helper.h +++ b/src/drivers/gps/gps_helper.h @@ -46,13 +46,17 @@ class GPS_Helper { public: + + GPS_Helper() {}; + virtual ~GPS_Helper() {}; + virtual int configure(unsigned &baud) = 0; virtual int receive(unsigned timeout) = 0; int set_baudrate(const int &fd, unsigned baud); float get_position_update_rate(); float get_velocity_update_rate(); - float reset_update_rates(); - float store_update_rates(); + void reset_update_rates(); + void store_update_rates(); protected: uint8_t _rate_count_lat_lon; diff --git a/src/drivers/gps/ubx.cpp b/src/drivers/gps/ubx.cpp index 8a2afecb7..19cf5beec 100644 --- a/src/drivers/gps/ubx.cpp +++ b/src/drivers/gps/ubx.cpp @@ -164,7 +164,7 @@ UBX::configure(unsigned &baudrate) send_config_packet(_fd, (uint8_t *)&cfg_rate_packet, sizeof(cfg_rate_packet)); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: configuration failed: RATE"); + warnx("CFG FAIL: RATE"); return 1; } @@ -185,7 +185,7 @@ UBX::configure(unsigned &baudrate) send_config_packet(_fd, (uint8_t *)&cfg_nav5_packet, sizeof(cfg_nav5_packet)); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: configuration failed: NAV5"); + warnx("CFG FAIL: NAV5"); return 1; } @@ -194,35 +194,42 @@ UBX::configure(unsigned &baudrate) configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_POSLLH, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV POSLLH"); + warnx("MSG CFG FAIL: NAV POSLLH"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_TIMEUTC, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV TIMEUTC"); + warnx("MSG CFG FAIL: NAV TIMEUTC"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SOL, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV SOL"); + warnx("MSG CFG FAIL: NAV SOL"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_VELNED, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV VELNED"); + warnx("MSG CFG FAIL: NAV VELNED"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SVINFO, 5); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV SVINFO"); + warnx("MSG CFG FAIL: NAV SVINFO"); + return 1; + } + + configure_message_rate(UBX_CLASS_MON, UBX_MESSAGE_MON_HW, 1); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("MSG CFG FAIL: MON HW"); return 1; } @@ -274,7 +281,7 @@ UBX::receive(unsigned timeout) if (ret < 0) { /* something went wrong when polling */ - warnx("ubx: poll error"); + warnx("poll error"); return -1; } else if (ret == 0) { @@ -310,7 +317,7 @@ UBX::receive(unsigned timeout) /* abort after timeout if no useful packets received */ if (time_started + timeout * 1000 < hrt_absolute_time()) { - warnx("ubx: timeout - no useful messages"); + warnx("timeout - no useful messages"); return -1; } } @@ -383,7 +390,7 @@ UBX::parse_char(uint8_t b) return 1; // message received successfully } else { - warnx("ubx: checksum wrong"); + warnx("checksum wrong"); decode_init(); return -1; } @@ -392,7 +399,7 @@ UBX::parse_char(uint8_t b) _rx_count++; } else { - warnx("ubx: buffer full"); + warnx("buffer full"); decode_init(); return -1; } @@ -566,6 +573,24 @@ UBX::handle_message() break; } + case UBX_CLASS_MON: { + switch (_message_id) { + case UBX_MESSAGE_MON_HW: { + + struct gps_bin_mon_hw_packet *p = (struct gps_bin_mon_hw_packet*) _rx_buffer; + + _gps_position->noise_per_ms = p->noisePerMS; + _gps_position->jamming_indicator = p->jamInd; + + ret = 1; + break; + } + + default: + break; + } + } + default: break; } diff --git a/src/drivers/gps/ubx.h b/src/drivers/gps/ubx.h index 79a904f4a..5cf47b60b 100644 --- a/src/drivers/gps/ubx.h +++ b/src/drivers/gps/ubx.h @@ -56,6 +56,7 @@ //#define UBX_CLASS_RXM 0x02 #define UBX_CLASS_ACK 0x05 #define UBX_CLASS_CFG 0x06 +#define UBX_CLASS_MON 0x0A /* MessageIDs (the ones that are used) */ #define UBX_MESSAGE_NAV_POSLLH 0x02 @@ -72,6 +73,8 @@ #define UBX_MESSAGE_CFG_RATE 0x08 #define UBX_MESSAGE_CFG_NAV5 0x24 +#define UBX_MESSAGE_MON_HW 0x09 + #define UBX_CFG_PRT_LENGTH 20 #define UBX_CFG_PRT_PAYLOAD_PORTID 0x01 /**< UART1 */ #define UBX_CFG_PRT_PAYLOAD_MODE 0x000008D0 /**< 0b0000100011010000: 8N1 */ @@ -210,6 +213,27 @@ typedef struct { uint8_t ck_b; } gps_bin_nav_velned_packet_t; +struct gps_bin_mon_hw_packet { + uint32_t pinSel; + uint32_t pinBank; + uint32_t pinDir; + uint32_t pinVal; + uint16_t noisePerMS; + uint16_t agcCnt; + uint8_t aStatus; + uint8_t aPower; + uint8_t flags; + uint8_t __reserved1; + uint32_t usedMask; + uint8_t VP[25]; + uint8_t jamInd; + uint16_t __reserved3; + uint32_t pinIrq; + uint32_t pulLH; + uint32_t pullL; +}; + + //typedef struct { // int32_t time_milliseconds; /**< Measurement integer millisecond GPS time of week */ // int16_t week; /**< Measurement GPS week number */ @@ -319,7 +343,7 @@ typedef enum { //typedef type_gps_bin_ubx_state gps_bin_ubx_state_t; #pragma pack(pop) -#define RECV_BUFFER_SIZE 500 //The NAV-SOL messages really need such a big buffer +#define RECV_BUFFER_SIZE 300 //The NAV-SOL messages really need such a big buffer class UBX : public GPS_Helper { @@ -383,7 +407,7 @@ private: uint8_t _message_class; uint8_t _message_id; unsigned _payload_size; - uint8_t _disable_cmd_last; + hrt_abstime _disable_cmd_last; }; #endif /* UBX_H_ */ diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index fd69cf795..8a4bfa18c 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -648,11 +648,9 @@ PX4FMU::task_main() /* iterate actuators */ for (unsigned i = 0; i < num_outputs; i++) { - /* last resort: catch NaN, INF and out-of-band errors */ - if (i >= outputs.noutputs || - !isfinite(outputs.output[i]) || - outputs.output[i] < -1.0f || - outputs.output[i] > 1.0f) { + /* last resort: catch NaN and INF */ + if ((i >= outputs.noutputs) || + !isfinite(outputs.output[i])) { /* * Value is NaN, INF or out of band - set to the minimum value. * This will be clearly visible on the servo status and will limit the risk of accidentally @@ -664,6 +662,7 @@ PX4FMU::task_main() uint16_t pwm_limited[num_outputs]; + /* the PWM limit call takes care of out of band errors and constrains */ pwm_limit_calc(_servo_armed, num_outputs, _disarmed_pwm, _min_pwm, _max_pwm, outputs.output, pwm_limited, &_pwm_limit); /* output to the servos */ diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 4099e5522..972f45148 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -581,8 +581,10 @@ PX4IO::init() ASSERT(_task == -1); sys_restart_param = param_find("SYS_RESTART_TYPE"); - /* Indicate restart type is unknown */ - param_set(sys_restart_param, &sys_restart_val); + if (sys_restart_param != PARAM_INVALID) { + /* Indicate restart type is unknown */ + param_set(sys_restart_param, &sys_restart_val); + } /* do regular cdev init */ ret = CDev::init(); diff --git a/src/examples/flow_position_control/flow_position_control_main.c b/src/examples/flow_position_control/flow_position_control_main.c deleted file mode 100644 index 391e40ac1..000000000 --- a/src/examples/flow_position_control/flow_position_control_main.c +++ /dev/null @@ -1,613 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2013 PX4 Development Team. All rights reserved. - * Author: Samuel Zihlmann <samuezih@ee.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file flow_position_control.c - * - * Optical flow position controller - */ - -#include <nuttx/config.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <errno.h> -#include <debug.h> -#include <termios.h> -#include <time.h> -#include <math.h> -#include <sys/prctl.h> -#include <drivers/drv_hrt.h> -#include <uORB/uORB.h> -#include <uORB/topics/parameter_update.h> -#include <uORB/topics/actuator_armed.h> -#include <uORB/topics/vehicle_control_mode.h> -#include <uORB/topics/vehicle_attitude.h> -#include <uORB/topics/manual_control_setpoint.h> -#include <uORB/topics/vehicle_local_position.h> -#include <uORB/topics/vehicle_bodyframe_speed_setpoint.h> -#include <uORB/topics/filtered_bottom_flow.h> -#include <systemlib/systemlib.h> -#include <systemlib/perf_counter.h> -#include <systemlib/err.h> -#include <poll.h> -#include <mavlink/mavlink_log.h> - -#include "flow_position_control_params.h" - - -static bool thread_should_exit = false; /**< Deamon exit flag */ -static bool thread_running = false; /**< Deamon status flag */ -static int deamon_task; /**< Handle of deamon task / thread */ - -__EXPORT int flow_position_control_main(int argc, char *argv[]); - -/** - * Mainloop of position controller. - */ -static int flow_position_control_thread_main(int argc, char *argv[]); - -/** - * Print the correct usage. - */ -static void usage(const char *reason); - -static void -usage(const char *reason) -{ - if (reason) - fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: deamon {start|stop|status} [-p <additional params>]\n\n"); - exit(1); -} - -/** - * The deamon app only briefly exists to start - * the background job. The stack size assigned in the - * Makefile does only apply to this management task. - * - * The actual stack size should be set in the call - * to task_spawn_cmd(). - */ -int flow_position_control_main(int argc, char *argv[]) -{ - if (argc < 1) - usage("missing command"); - - if (!strcmp(argv[1], "start")) - { - if (thread_running) - { - printf("flow position control already running\n"); - /* this is not an error */ - exit(0); - } - - thread_should_exit = false; - deamon_task = task_spawn_cmd("flow_position_control", - SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 6, - 4096, - flow_position_control_thread_main, - (argv) ? (const char **)&argv[2] : (const char **)NULL); - exit(0); - } - - if (!strcmp(argv[1], "stop")) - { - thread_should_exit = true; - exit(0); - } - - if (!strcmp(argv[1], "status")) - { - if (thread_running) - printf("\tflow position control app is running\n"); - else - printf("\tflow position control app not started\n"); - - exit(0); - } - - usage("unrecognized command"); - exit(1); -} - -static int -flow_position_control_thread_main(int argc, char *argv[]) -{ - /* welcome user */ - thread_running = true; - static int mavlink_fd; - mavlink_fd = open(MAVLINK_LOG_DEVICE, 0); - mavlink_log_info(mavlink_fd, "[fpc] started"); - - uint32_t counter = 0; - const float time_scale = powf(10.0f,-6.0f); - - /* structures */ - struct actuator_armed_s armed; - memset(&armed, 0, sizeof(armed)); - struct vehicle_control_mode_s control_mode; - memset(&control_mode, 0, sizeof(control_mode)); - struct vehicle_attitude_s att; - memset(&att, 0, sizeof(att)); - struct manual_control_setpoint_s manual; - memset(&manual, 0, sizeof(manual)); - struct filtered_bottom_flow_s filtered_flow; - memset(&filtered_flow, 0, sizeof(filtered_flow)); - struct vehicle_local_position_s local_pos; - memset(&local_pos, 0, sizeof(local_pos)); - struct vehicle_bodyframe_speed_setpoint_s speed_sp; - memset(&speed_sp, 0, sizeof(speed_sp)); - - /* subscribe to attitude, motor setpoints and system state */ - int parameter_update_sub = orb_subscribe(ORB_ID(parameter_update)); - int vehicle_attitude_sub = orb_subscribe(ORB_ID(vehicle_attitude)); - int armed_sub = orb_subscribe(ORB_ID(actuator_armed)); - int control_mode_sub = orb_subscribe(ORB_ID(vehicle_control_mode)); - int manual_control_setpoint_sub = orb_subscribe(ORB_ID(manual_control_setpoint)); - int filtered_bottom_flow_sub = orb_subscribe(ORB_ID(filtered_bottom_flow)); - int vehicle_local_position_sub = orb_subscribe(ORB_ID(vehicle_local_position)); - - orb_advert_t speed_sp_pub; - bool speed_setpoint_adverted = false; - - /* parameters init*/ - struct flow_position_control_params params; - struct flow_position_control_param_handles param_handles; - parameters_init(¶m_handles); - parameters_update(¶m_handles, ¶ms); - - /* init flow sum setpoint */ - float flow_sp_sumx = 0.0f; - float flow_sp_sumy = 0.0f; - - /* init yaw setpoint */ - float yaw_sp = 0.0f; - - /* init height setpoint */ - float height_sp = params.height_min; - - /* height controller states */ - bool start_phase = true; - bool landing_initialized = false; - float landing_thrust_start = 0.0f; - - /* states */ - float integrated_h_error = 0.0f; - float last_local_pos_z = 0.0f; - bool update_flow_sp_sumx = false; - bool update_flow_sp_sumy = false; - uint64_t last_time = 0.0f; - float dt = 0.0f; // s - - - /* register the perf counter */ - perf_counter_t mc_loop_perf = perf_alloc(PC_ELAPSED, "flow_position_control_runtime"); - perf_counter_t mc_interval_perf = perf_alloc(PC_INTERVAL, "flow_position_control_interval"); - perf_counter_t mc_err_perf = perf_alloc(PC_COUNT, "flow_position_control_err"); - - static bool sensors_ready = false; - static bool status_changed = false; - - while (!thread_should_exit) - { - /* wait for first attitude msg to be sure all data are available */ - if (sensors_ready) - { - /* polling */ - struct pollfd fds[2] = { - { .fd = filtered_bottom_flow_sub, .events = POLLIN }, // positions from estimator - { .fd = parameter_update_sub, .events = POLLIN } - - }; - - /* wait for a position update, check for exit condition every 500 ms */ - int ret = poll(fds, 2, 500); - - if (ret < 0) - { - /* poll error, count it in perf */ - perf_count(mc_err_perf); - } - else if (ret == 0) - { - /* no return value, ignore */ -// printf("[flow position control] no filtered flow updates\n"); - } - else - { - /* parameter update available? */ - if (fds[1].revents & POLLIN) - { - /* read from param to clear updated flag */ - struct parameter_update_s update; - orb_copy(ORB_ID(parameter_update), parameter_update_sub, &update); - - parameters_update(¶m_handles, ¶ms); - mavlink_log_info(mavlink_fd,"[fpc] parameters updated."); - } - - /* only run controller if position/speed changed */ - if (fds[0].revents & POLLIN) - { - perf_begin(mc_loop_perf); - - /* get a local copy of the vehicle state */ - orb_copy(ORB_ID(actuator_armed), armed_sub, &armed); - /* get a local copy of manual setpoint */ - orb_copy(ORB_ID(manual_control_setpoint), manual_control_setpoint_sub, &manual); - /* get a local copy of attitude */ - orb_copy(ORB_ID(vehicle_attitude), vehicle_attitude_sub, &att); - /* get a local copy of filtered bottom flow */ - orb_copy(ORB_ID(filtered_bottom_flow), filtered_bottom_flow_sub, &filtered_flow); - /* get a local copy of local position */ - orb_copy(ORB_ID(vehicle_local_position), vehicle_local_position_sub, &local_pos); - /* get a local copy of control mode */ - orb_copy(ORB_ID(vehicle_control_mode), control_mode_sub, &control_mode); - - if (control_mode.flag_control_velocity_enabled) - { - float manual_pitch = manual.pitch / params.rc_scale_pitch; // 0 to 1 - float manual_roll = manual.roll / params.rc_scale_roll; // 0 to 1 - float manual_yaw = manual.yaw / params.rc_scale_yaw; // -1 to 1 - - if(status_changed == false) - mavlink_log_info(mavlink_fd,"[fpc] flow POSITION control engaged"); - - status_changed = true; - - /* calc dt */ - if(last_time == 0) - { - last_time = hrt_absolute_time(); - continue; - } - dt = ((float) (hrt_absolute_time() - last_time)) * time_scale; - last_time = hrt_absolute_time(); - - /* update flow sum setpoint */ - if (update_flow_sp_sumx) - { - flow_sp_sumx = filtered_flow.sumx; - update_flow_sp_sumx = false; - } - if (update_flow_sp_sumy) - { - flow_sp_sumy = filtered_flow.sumy; - update_flow_sp_sumy = false; - } - - /* calc new bodyframe speed setpoints */ - float speed_body_x = (flow_sp_sumx - filtered_flow.sumx) * params.pos_p - filtered_flow.vx * params.pos_d; - float speed_body_y = (flow_sp_sumy - filtered_flow.sumy) * params.pos_p - filtered_flow.vy * params.pos_d; - float speed_limit_height_factor = height_sp; // the settings are for 1 meter - - /* overwrite with rc input if there is any */ - if(isfinite(manual_pitch) && isfinite(manual_roll)) - { - if(fabsf(manual_pitch) > params.manual_threshold) - { - speed_body_x = -manual_pitch * params.limit_speed_x * speed_limit_height_factor; - update_flow_sp_sumx = true; - } - - if(fabsf(manual_roll) > params.manual_threshold) - { - speed_body_y = manual_roll * params.limit_speed_y * speed_limit_height_factor; - update_flow_sp_sumy = true; - } - } - - /* limit speed setpoints */ - if((speed_body_x <= params.limit_speed_x * speed_limit_height_factor) && - (speed_body_x >= -params.limit_speed_x * speed_limit_height_factor)) - { - speed_sp.vx = speed_body_x; - } - else - { - if(speed_body_x > params.limit_speed_x * speed_limit_height_factor) - speed_sp.vx = params.limit_speed_x * speed_limit_height_factor; - if(speed_body_x < -params.limit_speed_x * speed_limit_height_factor) - speed_sp.vx = -params.limit_speed_x * speed_limit_height_factor; - } - - if((speed_body_y <= params.limit_speed_y * speed_limit_height_factor) && - (speed_body_y >= -params.limit_speed_y * speed_limit_height_factor)) - { - speed_sp.vy = speed_body_y; - } - else - { - if(speed_body_y > params.limit_speed_y * speed_limit_height_factor) - speed_sp.vy = params.limit_speed_y * speed_limit_height_factor; - if(speed_body_y < -params.limit_speed_y * speed_limit_height_factor) - speed_sp.vy = -params.limit_speed_y * speed_limit_height_factor; - } - - /* manual yaw change */ - if(isfinite(manual_yaw) && isfinite(manual.throttle)) - { - if(fabsf(manual_yaw) > params.manual_threshold && manual.throttle > 0.2f) - { - yaw_sp += manual_yaw * params.limit_yaw_step; - - /* modulo for rotation -pi +pi */ - if(yaw_sp < -M_PI_F) - yaw_sp = yaw_sp + M_TWOPI_F; - else if(yaw_sp > M_PI_F) - yaw_sp = yaw_sp - M_TWOPI_F; - } - } - - /* forward yaw setpoint */ - speed_sp.yaw_sp = yaw_sp; - - - /* manual height control - * 0-20%: thrust linear down - * 20%-40%: down - * 40%-60%: stabilize altitude - * 60-100%: up - */ - float thrust_control = 0.0f; - - if (isfinite(manual.throttle)) - { - if (start_phase) - { - /* control start thrust with stick input */ - if (manual.throttle < 0.4f) - { - /* first 40% for up to feedforward */ - thrust_control = manual.throttle / 0.4f * params.thrust_feedforward; - } - else - { - /* second 60% for up to feedforward + 10% */ - thrust_control = (manual.throttle - 0.4f) / 0.6f * 0.1f + params.thrust_feedforward; - } - - /* exit start phase if setpoint is reached */ - if (height_sp < -local_pos.z && thrust_control > params.limit_thrust_lower) - { - start_phase = false; - /* switch to stabilize */ - thrust_control = params.thrust_feedforward; - } - } - else - { - if (manual.throttle < 0.2f) - { - /* landing initialization */ - if (!landing_initialized) - { - /* consider last thrust control to avoid steps */ - landing_thrust_start = speed_sp.thrust_sp; - landing_initialized = true; - } - - /* set current height as setpoint to avoid steps */ - if (-local_pos.z > params.height_min) - height_sp = -local_pos.z; - else - height_sp = params.height_min; - - /* lower 20% stick range controls thrust down */ - thrust_control = manual.throttle / 0.2f * landing_thrust_start; - - /* assume ground position here */ - if (thrust_control < 0.1f) - { - /* reset integral if on ground */ - integrated_h_error = 0.0f; - /* switch to start phase */ - start_phase = true; - /* reset height setpoint */ - height_sp = params.height_min; - } - } - else - { - /* stabilized mode */ - landing_initialized = false; - - /* calc new thrust with PID */ - float height_error = (local_pos.z - (-height_sp)); - - /* update height setpoint if needed*/ - if (manual.throttle < 0.4f) - { - /* down */ - if (height_sp > params.height_min + params.height_rate && - fabsf(height_error) < params.limit_height_error) - height_sp -= params.height_rate * dt; - } - - if (manual.throttle > 0.6f) - { - /* up */ - if (height_sp < params.height_max && - fabsf(height_error) < params.limit_height_error) - height_sp += params.height_rate * dt; - } - - /* instead of speed limitation, limit height error (downwards) */ - if(height_error > params.limit_height_error) - height_error = params.limit_height_error; - else if(height_error < -params.limit_height_error) - height_error = -params.limit_height_error; - - integrated_h_error = integrated_h_error + height_error; - float integrated_thrust_addition = integrated_h_error * params.height_i; - - if(integrated_thrust_addition > params.limit_thrust_int) - integrated_thrust_addition = params.limit_thrust_int; - if(integrated_thrust_addition < -params.limit_thrust_int) - integrated_thrust_addition = -params.limit_thrust_int; - - float height_speed = last_local_pos_z - local_pos.z; - float thrust_diff = height_error * params.height_p - height_speed * params.height_d; - - thrust_control = params.thrust_feedforward + thrust_diff + integrated_thrust_addition; - - /* add attitude component - * F = Fz / (cos(pitch)*cos(roll)) -> can be found in rotM - */ -// // TODO problem with attitude -// if (att.R_valid && att.R[2][2] > 0) -// thrust_control = thrust_control / att.R[2][2]; - - /* set thrust lower limit */ - if(thrust_control < params.limit_thrust_lower) - thrust_control = params.limit_thrust_lower; - } - } - - /* set thrust upper limit */ - if(thrust_control > params.limit_thrust_upper) - thrust_control = params.limit_thrust_upper; - } - /* store actual height for speed estimation */ - last_local_pos_z = local_pos.z; - - speed_sp.thrust_sp = thrust_control; //manual.throttle; - speed_sp.timestamp = hrt_absolute_time(); - - /* publish new speed setpoint */ - if(isfinite(speed_sp.vx) && isfinite(speed_sp.vy) && isfinite(speed_sp.yaw_sp) && isfinite(speed_sp.thrust_sp)) - { - - if(speed_setpoint_adverted) - { - orb_publish(ORB_ID(vehicle_bodyframe_speed_setpoint), speed_sp_pub, &speed_sp); - } - else - { - speed_sp_pub = orb_advertise(ORB_ID(vehicle_bodyframe_speed_setpoint), &speed_sp); - speed_setpoint_adverted = true; - } - } - else - { - warnx("NaN in flow position controller!"); - } - } - else - { - /* in manual or stabilized state just reset speed and flow sum setpoint */ - //mavlink_log_info(mavlink_fd,"[fpc] reset speed sp, flow_sp_sumx,y (%f,%f)",filtered_flow.sumx, filtered_flow.sumy); - if(status_changed == true) - mavlink_log_info(mavlink_fd,"[fpc] flow POSITION controller disengaged."); - - status_changed = false; - speed_sp.vx = 0.0f; - speed_sp.vy = 0.0f; - flow_sp_sumx = filtered_flow.sumx; - flow_sp_sumy = filtered_flow.sumy; - if(isfinite(att.yaw)) - { - yaw_sp = att.yaw; - speed_sp.yaw_sp = att.yaw; - } - if(isfinite(manual.throttle)) - speed_sp.thrust_sp = manual.throttle; - } - /* measure in what intervals the controller runs */ - perf_count(mc_interval_perf); - perf_end(mc_loop_perf); - } - } - - counter++; - } - else - { - /* sensors not ready waiting for first attitude msg */ - - /* polling */ - struct pollfd fds[1] = { - { .fd = vehicle_attitude_sub, .events = POLLIN }, - }; - - /* wait for a flow msg, check for exit condition every 5 s */ - int ret = poll(fds, 1, 5000); - - if (ret < 0) - { - /* poll error, count it in perf */ - perf_count(mc_err_perf); - } - else if (ret == 0) - { - /* no return value, ignore */ - mavlink_log_info(mavlink_fd,"[fpc] no attitude received.\n"); - } - else - { - if (fds[0].revents & POLLIN) - { - sensors_ready = true; - mavlink_log_info(mavlink_fd,"[fpc] initialized.\n"); - } - } - } - } - - mavlink_log_info(mavlink_fd,"[fpc] ending now...\n"); - - thread_running = false; - - close(parameter_update_sub); - close(vehicle_attitude_sub); - close(vehicle_local_position_sub); - close(armed_sub); - close(control_mode_sub); - close(manual_control_setpoint_sub); - close(speed_sp_pub); - - perf_print_counter(mc_loop_perf); - perf_free(mc_loop_perf); - - fflush(stdout); - return 0; -} - diff --git a/src/examples/flow_position_control/flow_position_control_params.c b/src/examples/flow_position_control/flow_position_control_params.c deleted file mode 100644 index eb1473647..000000000 --- a/src/examples/flow_position_control/flow_position_control_params.c +++ /dev/null @@ -1,124 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2013 PX4 Development Team. All rights reserved. - * Author: Samuel Zihlmann <samuezih@ee.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file flow_position_control_params.c - */ - -#include "flow_position_control_params.h" - -/* controller parameters */ - -// Position control P gain -PARAM_DEFINE_FLOAT(FPC_POS_P, 3.0f); -// Position control D / damping gain -PARAM_DEFINE_FLOAT(FPC_POS_D, 0.0f); -// Altitude control P gain -PARAM_DEFINE_FLOAT(FPC_H_P, 0.15f); -// Altitude control I (integrator) gain -PARAM_DEFINE_FLOAT(FPC_H_I, 0.00001f); -// Altitude control D gain -PARAM_DEFINE_FLOAT(FPC_H_D, 0.8f); -// Altitude control rate limiter -PARAM_DEFINE_FLOAT(FPC_H_RATE, 0.1f); -// Altitude control minimum altitude -PARAM_DEFINE_FLOAT(FPC_H_MIN, 0.5f); -// Altitude control maximum altitude (higher than 1.5m is untested) -PARAM_DEFINE_FLOAT(FPC_H_MAX, 1.5f); -// Altitude control feed forward throttle - adjust to the -// throttle position (0..1) where the copter hovers in manual flight -PARAM_DEFINE_FLOAT(FPC_T_FFWD, 0.7f); // adjust this before flight -PARAM_DEFINE_FLOAT(FPC_L_S_X, 1.2f); -PARAM_DEFINE_FLOAT(FPC_L_S_Y, 1.2f); -PARAM_DEFINE_FLOAT(FPC_L_H_ERR, 0.1f); -PARAM_DEFINE_FLOAT(FPC_L_TH_I, 0.05f); -PARAM_DEFINE_FLOAT(FPC_L_TH_U, 0.8f); -PARAM_DEFINE_FLOAT(FPC_L_TH_L, 0.6f); -PARAM_DEFINE_FLOAT(FPC_L_YAW_STEP, 0.03f); -PARAM_DEFINE_FLOAT(FPC_MAN_THR, 0.1f); - - -int parameters_init(struct flow_position_control_param_handles *h) -{ - /* PID parameters */ - h->pos_p = param_find("FPC_POS_P"); - h->pos_d = param_find("FPC_POS_D"); - h->height_p = param_find("FPC_H_P"); - h->height_i = param_find("FPC_H_I"); - h->height_d = param_find("FPC_H_D"); - h->height_rate = param_find("FPC_H_RATE"); - h->height_min = param_find("FPC_H_MIN"); - h->height_max = param_find("FPC_H_MAX"); - h->thrust_feedforward = param_find("FPC_T_FFWD"); - h->limit_speed_x = param_find("FPC_L_S_X"); - h->limit_speed_y = param_find("FPC_L_S_Y"); - h->limit_height_error = param_find("FPC_L_H_ERR"); - h->limit_thrust_int = param_find("FPC_L_TH_I"); - h->limit_thrust_upper = param_find("FPC_L_TH_U"); - h->limit_thrust_lower = param_find("FPC_L_TH_L"); - h->limit_yaw_step = param_find("FPC_L_YAW_STEP"); - h->manual_threshold = param_find("FPC_MAN_THR"); - h->rc_scale_pitch = param_find("RC_SCALE_PITCH"); - h->rc_scale_roll = param_find("RC_SCALE_ROLL"); - h->rc_scale_yaw = param_find("RC_SCALE_YAW"); - - return OK; -} - -int parameters_update(const struct flow_position_control_param_handles *h, struct flow_position_control_params *p) -{ - param_get(h->pos_p, &(p->pos_p)); - param_get(h->pos_d, &(p->pos_d)); - param_get(h->height_p, &(p->height_p)); - param_get(h->height_i, &(p->height_i)); - param_get(h->height_d, &(p->height_d)); - param_get(h->height_rate, &(p->height_rate)); - param_get(h->height_min, &(p->height_min)); - param_get(h->height_max, &(p->height_max)); - param_get(h->thrust_feedforward, &(p->thrust_feedforward)); - param_get(h->limit_speed_x, &(p->limit_speed_x)); - param_get(h->limit_speed_y, &(p->limit_speed_y)); - param_get(h->limit_height_error, &(p->limit_height_error)); - param_get(h->limit_thrust_int, &(p->limit_thrust_int)); - param_get(h->limit_thrust_upper, &(p->limit_thrust_upper)); - param_get(h->limit_thrust_lower, &(p->limit_thrust_lower)); - param_get(h->limit_yaw_step, &(p->limit_yaw_step)); - param_get(h->manual_threshold, &(p->manual_threshold)); - param_get(h->rc_scale_pitch, &(p->rc_scale_pitch)); - param_get(h->rc_scale_roll, &(p->rc_scale_roll)); - param_get(h->rc_scale_yaw, &(p->rc_scale_yaw)); - - return OK; -} diff --git a/src/examples/flow_position_control/flow_position_control_params.h b/src/examples/flow_position_control/flow_position_control_params.h deleted file mode 100644 index d0c8fc722..000000000 --- a/src/examples/flow_position_control/flow_position_control_params.h +++ /dev/null @@ -1,100 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2013 PX4 Development Team. All rights reserved. - * Author: Samuel Zihlmann <samuezih@ee.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file flow_position_control_params.h - * - * Parameters for position controller - */ - -#include <systemlib/param/param.h> - -struct flow_position_control_params { - float pos_p; - float pos_d; - float height_p; - float height_i; - float height_d; - float height_rate; - float height_min; - float height_max; - float thrust_feedforward; - float limit_speed_x; - float limit_speed_y; - float limit_height_error; - float limit_thrust_int; - float limit_thrust_upper; - float limit_thrust_lower; - float limit_yaw_step; - float manual_threshold; - float rc_scale_pitch; - float rc_scale_roll; - float rc_scale_yaw; -}; - -struct flow_position_control_param_handles { - param_t pos_p; - param_t pos_d; - param_t height_p; - param_t height_i; - param_t height_d; - param_t height_rate; - param_t height_min; - param_t height_max; - param_t thrust_feedforward; - param_t limit_speed_x; - param_t limit_speed_y; - param_t limit_height_error; - param_t limit_thrust_int; - param_t limit_thrust_upper; - param_t limit_thrust_lower; - param_t limit_yaw_step; - param_t manual_threshold; - param_t rc_scale_pitch; - param_t rc_scale_roll; - param_t rc_scale_yaw; -}; - -/** - * Initialize all parameter handles and values - * - */ -int parameters_init(struct flow_position_control_param_handles *h); - -/** - * Update all parameters - * - */ -int parameters_update(const struct flow_position_control_param_handles *h, struct flow_position_control_params *p); diff --git a/src/examples/flow_position_control/module.mk b/src/examples/flow_position_control/module.mk deleted file mode 100644 index b10dc490a..000000000 --- a/src/examples/flow_position_control/module.mk +++ /dev/null @@ -1,41 +0,0 @@ -############################################################################ -# -# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Build multirotor position control -# - -MODULE_COMMAND = flow_position_control - -SRCS = flow_position_control_main.c \ - flow_position_control_params.c diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index c26200048..5c0628a16 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -1233,10 +1233,10 @@ int commander_thread_main(int argc, char *argv[]) sp_man.r > STICK_ON_OFF_LIMIT && sp_man.z < 0.1f) { if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) { if (safety.safety_switch_available && !safety.safety_off && status.hil_state == HIL_STATE_OFF) { - print_reject_arm("NOT ARMING: Press safety switch first."); + print_reject_arm("#audio: NOT ARMING: Press safety switch first."); } else if (status.main_state != MAIN_STATE_MANUAL) { - print_reject_arm("NOT ARMING: Switch to MANUAL mode first."); + print_reject_arm("#audio: NOT ARMING: Switch to MANUAL mode first."); } else { arming_res = arming_state_transition(&status, &safety, ARMING_STATE_ARMED, &armed); @@ -1408,7 +1408,7 @@ int commander_thread_main(int argc, char *argv[]) home.alt = global_position.alt; warnx("home: lat = %.7f, lon = %.7f, alt = %.2f ", home.lat, home.lon, (double)home.alt); - mavlink_log_info(mavlink_fd, "[cmd] home: %.7f, %.7f, %.2f", home.lat, home.lon, (double)home.alt); + mavlink_log_info(mavlink_fd, "#audio: home: %.7f, %.7f, %.2f", home.lat, home.lon, (double)home.alt); /* announce new home position */ if (home_pub > 0) { @@ -1848,7 +1848,8 @@ void answer_command(struct vehicle_command_s &cmd, enum VEHICLE_CMD_RESULT resul break; case VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED: - mavlink_log_critical(mavlink_fd, "#audio: command temporarily rejected: %u", cmd.command); + /* this needs additional hints to the user - so let other messages pass and be spoken */ + mavlink_log_critical(mavlink_fd, "command temporarily rejected: %u", cmd.command); tune_negative(true); break; diff --git a/src/modules/commander/state_machine_helper.cpp b/src/modules/commander/state_machine_helper.cpp index f1a353d5b..87309b238 100644 --- a/src/modules/commander/state_machine_helper.cpp +++ b/src/modules/commander/state_machine_helper.cpp @@ -138,7 +138,7 @@ arming_state_transition(struct vehicle_status_s *status, /// current // Allow if HIL_STATE_ON if (status->arming_state != ARMING_STATE_IN_AIR_RESTORE && status->hil_state == HIL_STATE_OFF && safety->safety_switch_available && !safety->safety_off) { if (mavlink_fd) { - mavlink_log_critical(mavlink_fd, "NOT ARMING: Press safety switch first."); + mavlink_log_critical(mavlink_fd, "#audio: NOT ARMING: Press safety switch first."); } valid_transition = false; @@ -312,7 +312,7 @@ int hil_state_transition(hil_state_t new_state, int status_pub, struct vehicle_s case HIL_STATE_OFF: /* we're in HIL and unexpected things can happen if we disable HIL now */ - mavlink_log_critical(mavlink_fd, "Not switching off HIL (safety)"); + mavlink_log_critical(mavlink_fd, "#audio: Not switching off HIL (safety)"); valid_transition = false; break; diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index ebf4f3e8e..2f721bf1e 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -213,6 +213,7 @@ mixer_tick(void) mixed = mixer_group.mix(&outputs[0], PX4IO_SERVO_COUNT); in_mixer = false; + /* the pwm limit call takes care of out of band errors */ pwm_limit_calc(should_arm, mixed, r_page_servo_disarmed, r_page_servo_control_min, r_page_servo_control_max, outputs, r_page_servos, &pwm_limit); for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index 70ce76806..577cadfbb 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -89,6 +89,7 @@ #include <systemlib/systemlib.h> #include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> #include <version/version.h> #include <mavlink/mavlink_log.h> @@ -97,6 +98,36 @@ #include "sdlog2_format.h" #include "sdlog2_messages.h" +/** + * Logging rate. + * + * A value of -1 indicates the commandline argument + * should be obeyed. A value of 0 sets the minimum rate, + * any other value is interpreted as rate in Hertz. This + * parameter is only read out before logging starts (which + * commonly is before arming). + * + * @min -1 + * @max 1 + * @group SD Logging + */ +PARAM_DEFINE_INT32(SDLOG_RATE, -1); + +/** + * Enable extended logging mode. + * + * A value of -1 indicates the commandline argument + * should be obeyed. A value of 0 disables extended + * logging mode, a value of 1 enables it. This + * parameter is only read out before logging starts + * (which commonly is before arming). + * + * @min -1 + * @max 1 + * @group SD Logging + */ +PARAM_DEFINE_INT32(SDLOG_EXT, -1); + #define LOGBUFFER_WRITE_AND_COUNT(_msg) if (logbuffer_write(&lb, &log_msg, LOG_PACKET_SIZE(_msg))) { \ log_msgs_written++; \ } else { \ @@ -112,12 +143,14 @@ static bool main_thread_should_exit = false; /**< Deamon exit flag */ static bool thread_running = false; /**< Deamon status flag */ static int deamon_task; /**< Handle of deamon task / thread */ static bool logwriter_should_exit = false; /**< Logwriter thread exit flag */ -static const int MAX_NO_LOGFOLDER = 999; /**< Maximum number of log dirs */ -static const int MAX_NO_LOGFILE = 999; /**< Maximum number of log files */ +static const unsigned MAX_NO_LOGFOLDER = 999; /**< Maximum number of log dirs */ +static const unsigned MAX_NO_LOGFILE = 999; /**< Maximum number of log files */ static const int LOG_BUFFER_SIZE_DEFAULT = 8192; static const int MAX_WRITE_CHUNK = 512; static const int MIN_BYTES_TO_WRITE = 512; +static bool _extended_logging = false; + static const char *log_root = "/fs/microsd/log"; static int mavlink_fd = -1; struct logbuffer_s lb; @@ -218,6 +251,8 @@ static int create_log_dir(void); */ static int open_log_file(void); +static int open_perf_file(const char* str); + static void sdlog2_usage(const char *reason) { @@ -225,12 +260,13 @@ sdlog2_usage(const char *reason) fprintf(stderr, "%s\n", reason); } - errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a -t\n" + errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a -t -x\n" "\t-r\tLog rate in Hz, 0 means unlimited rate\n" "\t-b\tLog buffer size in KiB, default is 8\n" "\t-e\tEnable logging by default (if not, can be started by command)\n" "\t-a\tLog only when armed (can be still overriden by command)\n" - "\t-t\tUse date/time for naming log directories and files\n"); + "\t-t\tUse date/time for naming log directories and files\n" + "\t-x\tExtended logging"); } /** @@ -349,8 +385,8 @@ int create_log_dir() int open_log_file() { /* string to hold the path to the log */ - char log_file_name[16] = ""; - char log_file_path[48] = ""; + char log_file_name[32] = ""; + char log_file_path[64] = ""; if (log_name_timestamp && gps_time != 0) { /* use GPS time for log file naming, e.g. /fs/microsd/2014-01-19/19_37_52.bin */ @@ -378,7 +414,7 @@ int open_log_file() if (file_number > MAX_NO_LOGFILE) { /* we should not end up here, either we have more than MAX_NO_LOGFILE on the SD card, or another problem */ - warnx("all %d possible files exist already", MAX_NO_LOGFILE); + mavlink_log_critical(mavlink_fd, "[sdlog2] ERR: max files %d", MAX_NO_LOGFILE); return -1; } } @@ -387,7 +423,58 @@ int open_log_file() if (fd < 0) { warn("failed opening log: %s", log_file_name); - mavlink_log_info(mavlink_fd, "[sdlog2] failed opening log: %s", log_file_name); + mavlink_log_critical(mavlink_fd, "[sdlog2] failed opening log: %s", log_file_name); + + } else { + warnx("log file: %s", log_file_name); + mavlink_log_info(mavlink_fd, "[sdlog2] log file: %s", log_file_name); + } + + return fd; +} + +int open_perf_file(const char* str) +{ + /* string to hold the path to the log */ + char log_file_name[32] = ""; + char log_file_path[64] = ""; + + if (log_name_timestamp && gps_time != 0) { + /* use GPS time for log file naming, e.g. /fs/microsd/2014-01-19/19_37_52.bin */ + time_t gps_time_sec = gps_time / 1000000; + struct tm t; + gmtime_r(&gps_time_sec, &t); + strftime(log_file_name, sizeof(log_file_name), "perf%H_%M_%S.txt", &t); + snprintf(log_file_path, sizeof(log_file_path), "%s/%s_%s", log_dir, str, log_file_name); + + } else { + unsigned file_number = 1; // start with file log001 + + /* look for the next file that does not exist */ + while (file_number <= MAX_NO_LOGFILE) { + /* format log file path: e.g. /fs/microsd/sess001/log001.bin */ + snprintf(log_file_name, sizeof(log_file_name), "perf%03u.txt", file_number); + snprintf(log_file_path, sizeof(log_file_path), "%s/%s_%s", log_dir, str, log_file_name); + + if (!file_exist(log_file_path)) { + break; + } + + file_number++; + } + + if (file_number > MAX_NO_LOGFILE) { + /* we should not end up here, either we have more than MAX_NO_LOGFILE on the SD card, or another problem */ + mavlink_log_critical(mavlink_fd, "[sdlog2] ERR: max files %d", MAX_NO_LOGFILE); + return -1; + } + } + + int fd = open(log_file_path, O_CREAT | O_WRONLY | O_DSYNC); + + if (fd < 0) { + warn("failed opening log: %s", log_file_name); + mavlink_log_critical(mavlink_fd, "[sdlog2] failed opening log: %s", log_file_name); } else { warnx("log file: %s", log_file_name); @@ -529,6 +616,12 @@ void sdlog2_start_log() errx(1, "error creating logwriter thread"); } + /* write all performance counters */ + int perf_fd = open_perf_file("preflight"); + dprintf(perf_fd, "PERFORMANCE COUNTERS PRE-FLIGHT\n\n"); + perf_print_all(perf_fd); + close(perf_fd); + logging_enabled = true; } @@ -556,6 +649,12 @@ void sdlog2_stop_log() logwriter_pthread = 0; pthread_attr_destroy(&logwriter_attr); + /* write all performance counters */ + int perf_fd = open_perf_file("postflight"); + dprintf(perf_fd, "PERFORMANCE COUNTERS POST-FLIGHT\n\n"); + perf_print_all(perf_fd); + close(perf_fd); + sdlog2_status(); } @@ -572,7 +671,7 @@ int write_formats(int fd) int written = 0; /* fill message format packet for each format and write it */ - for (int i = 0; i < log_formats_num; i++) { + for (unsigned i = 0; i < log_formats_num; i++) { log_msg_format.body = log_formats[i]; written += write(fd, &log_msg_format, sizeof(log_msg_format)); } @@ -679,7 +778,7 @@ int sdlog2_thread_main(int argc, char *argv[]) * set error flag instead */ bool err_flag = false; - while ((ch = getopt(argc, argv, "r:b:eat")) != EOF) { + while ((ch = getopt(argc, argv, "r:b:eatx")) != EOF) { switch (ch) { case 'r': { unsigned long r = strtoul(optarg, NULL, 10); @@ -715,6 +814,10 @@ int sdlog2_thread_main(int argc, char *argv[]) log_name_timestamp = true; break; + case 'x': + _extended_logging = true; + break; + case '?': if (optopt == 'c') { warnx("option -%c requires an argument", optopt); @@ -741,6 +844,44 @@ int sdlog2_thread_main(int argc, char *argv[]) gps_time = 0; + /* interpret logging params */ + + param_t log_rate_ph = param_find("SDLOG_RATE"); + + if (log_rate_ph != PARAM_INVALID) { + int32_t param_log_rate; + param_get(log_rate_ph, ¶m_log_rate); + + if (param_log_rate > 0) { + + /* we can't do more than ~ 500 Hz, even with a massive buffer */ + if (param_log_rate > 500) { + param_log_rate = 500; + } + + sleep_delay = 1000000 / param_log_rate; + } else if (param_log_rate == 0) { + /* we need at minimum 10 Hz to be able to see anything */ + sleep_delay = 1000000 / 10; + } + } + + param_t log_ext_ph = param_find("SDLOG_EXT"); + + if (log_ext_ph != PARAM_INVALID) { + + int32_t param_log_extended; + param_get(log_ext_ph, ¶m_log_extended); + + if (param_log_extended > 0) { + _extended_logging = true; + } else if (param_log_extended == 0) { + _extended_logging = false; + } + /* any other value means to ignore the parameter, so no else case */ + + } + /* create log root dir */ int mkdir_ret = mkdir(log_root, S_IRWXU | S_IRWXG | S_IRWXO); @@ -834,8 +975,10 @@ int sdlog2_thread_main(int argc, char *argv[]) struct log_ESTM_s log_ESTM; struct log_PWR_s log_PWR; struct log_VICN_s log_VICN; - struct log_GSN0_s log_GSN0; - struct log_GSN1_s log_GSN1; + struct log_GS0A_s log_GS0A; + struct log_GS0B_s log_GS0B; + struct log_GS1A_s log_GS1A; + struct log_GS1B_s log_GS1B; } body; } log_msg = { LOG_PACKET_HEADER_INIT(0) @@ -969,8 +1112,17 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(STAT); } - /* --- GPS POSITION --- */ + /* --- GPS POSITION - UNIT #1 --- */ if (gps_pos_updated) { + + float snr_mean = 0.0f; + + for (unsigned i = 0; i < buf_gps_pos.satellites_visible; i++) { + snr_mean += buf_gps_pos.satellite_snr[i]; + } + + snr_mean /= buf_gps_pos.satellites_visible; + log_msg.msg_type = LOG_GPS_MSG; log_msg.body.log_GPS.gps_time = buf_gps_pos.time_gps_usec; log_msg.body.log_GPS.fix_type = buf_gps_pos.fix_type; @@ -983,19 +1135,48 @@ int sdlog2_thread_main(int argc, char *argv[]) log_msg.body.log_GPS.vel_e = buf_gps_pos.vel_e_m_s; log_msg.body.log_GPS.vel_d = buf_gps_pos.vel_d_m_s; log_msg.body.log_GPS.cog = buf_gps_pos.cog_rad; + log_msg.body.log_GPS.sats = buf_gps_pos.satellites_visible; + log_msg.body.log_GPS.snr_mean = snr_mean; + log_msg.body.log_GPS.noise_per_ms = buf_gps_pos.noise_per_ms; + log_msg.body.log_GPS.jamming_indicator = buf_gps_pos.jamming_indicator; LOGBUFFER_WRITE_AND_COUNT(GPS); - /* log the SNR of each satellite for a detailed view of signal quality */ - log_msg.msg_type = LOG_GSN0_MSG; - /* pick the smaller number so we do not overflow any of the arrays */ - unsigned gps_msg_max_snr = sizeof(buf_gps_pos.satellite_snr) / sizeof(buf_gps_pos.satellite_snr[0]); - unsigned log_max_snr = sizeof(log_msg.body.log_GSN0.satellite_snr) / sizeof(log_msg.body.log_GSN0.satellite_snr[0]); - unsigned sat_max_snr = (gps_msg_max_snr < log_max_snr) ? gps_msg_max_snr : log_max_snr; + if (_extended_logging) { + /* log the SNR of each satellite for a detailed view of signal quality */ + unsigned gps_msg_max_snr = sizeof(buf_gps_pos.satellite_snr) / sizeof(buf_gps_pos.satellite_snr[0]); + unsigned log_max_snr = sizeof(log_msg.body.log_GS0A.satellite_snr) / sizeof(log_msg.body.log_GS0A.satellite_snr[0]); + + log_msg.msg_type = LOG_GS0A_MSG; + memset(&log_msg.body.log_GS0A, 0, sizeof(log_msg.body.log_GS0A)); + /* fill set A */ + for (unsigned i = 0; i < gps_msg_max_snr; i++) { + + int satindex = buf_gps_pos.satellite_prn[i] - 1; - for (unsigned i = 0; i < sat_max_snr; i++) { - log_msg.body.log_GSN0.satellite_snr[i] = buf_gps_pos.satellite_snr[i]; + /* handles index exceeding and wraps to to arithmetic errors */ + if ((satindex >= 0) && (satindex < (int)log_max_snr)) { + /* map satellites by their ID so that logs from two receivers can be compared */ + log_msg.body.log_GS0A.satellite_snr[satindex] = buf_gps_pos.satellite_snr[i]; + } + } + LOGBUFFER_WRITE_AND_COUNT(GS0A); + + log_msg.msg_type = LOG_GS0B_MSG; + memset(&log_msg.body.log_GS0B, 0, sizeof(log_msg.body.log_GS0B)); + /* fill set B */ + for (unsigned i = 0; i < gps_msg_max_snr; i++) { + + /* get second bank of satellites, thus deduct bank size from index */ + int satindex = buf_gps_pos.satellite_prn[i] - 1 - log_max_snr; + + /* handles index exceeding and wraps to to arithmetic errors */ + if ((satindex >= 0) && (satindex < (int)log_max_snr)) { + /* map satellites by their ID so that logs from two receivers can be compared */ + log_msg.body.log_GS0B.satellite_snr[satindex] = buf_gps_pos.satellite_snr[i]; + } + } + LOGBUFFER_WRITE_AND_COUNT(GS0B); } - LOGBUFFER_WRITE_AND_COUNT(GSN0); } /* --- SENSOR COMBINED --- */ @@ -1340,6 +1521,7 @@ void sdlog2_status() float seconds = ((float)(hrt_absolute_time() - start_time)) / 1000000.0f; warnx("wrote %lu msgs, %4.2f MiB (average %5.3f KiB/s), skipped %lu msgs", log_msgs_written, (double)mebibytes, (double)(kibibytes / seconds), log_msgs_skipped); + warnx("extended logging: %s", (_extended_logging) ? "ON" : "OFF"); mavlink_log_info(mavlink_fd, "[sdlog2] wrote %lu msgs, skipped %lu msgs", log_msgs_written, log_msgs_skipped); } diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index 90025b9ff..f4d88f079 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -139,6 +139,10 @@ struct log_GPS_s { float vel_e; float vel_d; float cog; + uint8_t sats; + uint16_t snr_mean; + uint16_t noise_per_ms; + uint16_t jamming_indicator; }; /* --- ATTC - ATTITUDE CONTROLS (ACTUATOR_0 CONTROLS)--- */ @@ -318,16 +322,28 @@ struct log_VICN_s { float yaw; }; -/* --- GSN0 - GPS SNR #0 --- */ -#define LOG_GSN0_MSG 26 -struct log_GSN0_s { - uint8_t satellite_snr[16]; /**< Signal to noise ratio of satellite. 0 for none, 255 for max. */ +/* --- GS0A - GPS SNR #0, SAT GROUP A --- */ +#define LOG_GS0A_MSG 26 +struct log_GS0A_s { + uint8_t satellite_snr[16]; /**< dBHz, Signal to noise ratio of satellite C/N0, range 0..99 */ }; -/* --- GSN1 - GPS SNR #1 --- */ -#define LOG_GSN1_MSG 27 -struct log_GSN1_s { - uint8_t satellite_snr[16]; /**< Signal to noise ratio of satellite. 0 for none, 255 for max. */ +/* --- GS0B - GPS SNR #0, SAT GROUP B --- */ +#define LOG_GS0B_MSG 27 +struct log_GS0B_s { + uint8_t satellite_snr[16]; /**< dBHz, Signal to noise ratio of satellite C/N0, range 0..99 */ +}; + +/* --- GS1A - GPS SNR #1, SAT GROUP A --- */ +#define LOG_GS1A_MSG 28 +struct log_GS1A_s { + uint8_t satellite_snr[16]; /**< dBHz, Signal to noise ratio of satellite C/N0, range 0..99 */ +}; + +/* --- GS1B - GPS SNR #1, SAT GROUP B --- */ +#define LOG_GS1B_MSG 29 +struct log_GS1B_s { + uint8_t satellite_snr[16]; /**< dBHz, Signal to noise ratio of satellite C/N0, range 0..99 */ }; /********** SYSTEM MESSAGES, ID > 0x80 **********/ @@ -363,7 +379,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(SENS, "fffff", "BaroPres,BaroAlt,BaroTemp,DiffPres,DiffPresFilt"), LOG_FORMAT(LPOS, "ffffffffLLfBBBff", "X,Y,Z,Dist,DistR,VX,VY,VZ,RLat,RLon,RAlt,PFlg,LFlg,GFlg,EPH,EPV"), LOG_FORMAT(LPSP, "ffff", "X,Y,Z,Yaw"), - LOG_FORMAT(GPS, "QBffLLfffff", "GPSTime,FixType,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog"), + LOG_FORMAT(GPS, "QBffLLfffffBHHH", "GPSTime,Fix,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog,nSat,SNR,N,J"), LOG_FORMAT(ATTC, "ffff", "Roll,Pitch,Yaw,Thrust"), LOG_FORMAT(STAT, "BBBfBB", "MainState,ArmState,FailsafeState,BatRem,BatWarn,Landed"), LOG_FORMAT(RC, "ffffffffBB", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7,Count,SignalLost"), @@ -381,8 +397,10 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(ESTM, "ffffffffffBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,nStat,statNaN,covNaN,kGainNaN"), LOG_FORMAT(PWR, "fffBBBBB", "Periph5V,Servo5V,RSSI,UsbOk,BrickOk,ServoOk,PeriphOC,HipwrOC"), LOG_FORMAT(VICN, "ffffff", "X,Y,Z,Roll,Pitch,Yaw"), - LOG_FORMAT(GSN0, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), - LOG_FORMAT(GSN1, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), + LOG_FORMAT(GS0A, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), + LOG_FORMAT(GS0B, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), + LOG_FORMAT(GS1A, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), + LOG_FORMAT(GS1B, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), /* system-level messages, ID >= 0x80 */ /* FMT: don't write format of format message, it's useless */ diff --git a/src/modules/systemlib/mixer/mixer_multirotor.cpp b/src/modules/systemlib/mixer/mixer_multirotor.cpp index 4ad21d818..092c0e2b0 100644 --- a/src/modules/systemlib/mixer/mixer_multirotor.cpp +++ b/src/modules/systemlib/mixer/mixer_multirotor.cpp @@ -351,9 +351,9 @@ MultirotorMixer::mix(float *outputs, unsigned space) scale_out = 1.0f; } - /* scale outputs to range _idle_speed..1 */ + /* scale outputs to range _idle_speed..1, and do final limiting */ for (unsigned i = 0; i < _rotor_count; i++) { - outputs[i] = _idle_speed + (outputs[i] * (1.0f - _idle_speed) * scale_out); + outputs[i] = constrain(_idle_speed + (outputs[i] * (1.0f - _idle_speed) * scale_out), _idle_speed, 1.0f); } return _rotor_count; diff --git a/src/modules/systemlib/perf_counter.c b/src/modules/systemlib/perf_counter.c index b4ca0ed3e..22182e39e 100644 --- a/src/modules/systemlib/perf_counter.c +++ b/src/modules/systemlib/perf_counter.c @@ -282,12 +282,18 @@ perf_reset(perf_counter_t handle) void perf_print_counter(perf_counter_t handle) { + perf_print_counter_fd(0, handle); +} + +void +perf_print_counter_fd(int fd, perf_counter_t handle) +{ if (handle == NULL) return; switch (handle->type) { case PC_COUNT: - printf("%s: %llu events\n", + dprintf(fd, "%s: %llu events\n", handle->name, ((struct perf_ctr_count *)handle)->event_count); break; @@ -295,7 +301,7 @@ perf_print_counter(perf_counter_t handle) case PC_ELAPSED: { struct perf_ctr_elapsed *pce = (struct perf_ctr_elapsed *)handle; - printf("%s: %llu events, %lluus elapsed, %llu avg, min %lluus max %lluus\n", + dprintf(fd, "%s: %llu events, %lluus elapsed, %llu avg, min %lluus max %lluus\n", handle->name, pce->event_count, pce->time_total, @@ -308,7 +314,7 @@ perf_print_counter(perf_counter_t handle) case PC_INTERVAL: { struct perf_ctr_interval *pci = (struct perf_ctr_interval *)handle; - printf("%s: %llu events, %llu avg, min %lluus max %lluus\n", + dprintf(fd, "%s: %llu events, %llu avg, min %lluus max %lluus\n", handle->name, pci->event_count, (pci->time_last - pci->time_first) / pci->event_count, @@ -349,12 +355,12 @@ perf_event_count(perf_counter_t handle) } void -perf_print_all(void) +perf_print_all(int fd) { perf_counter_t handle = (perf_counter_t)sq_peek(&perf_counters); while (handle != NULL) { - perf_print_counter(handle); + perf_print_counter_fd(fd, handle); handle = (perf_counter_t)sq_next(&handle->link); } } diff --git a/src/modules/systemlib/perf_counter.h b/src/modules/systemlib/perf_counter.h index d8f69fdbf..6835ee4a2 100644 --- a/src/modules/systemlib/perf_counter.h +++ b/src/modules/systemlib/perf_counter.h @@ -121,16 +121,26 @@ __EXPORT extern void perf_cancel(perf_counter_t handle); __EXPORT extern void perf_reset(perf_counter_t handle); /** - * Print one performance counter. + * Print one performance counter to stdout * * @param handle The counter to print. */ __EXPORT extern void perf_print_counter(perf_counter_t handle); /** + * Print one performance counter to a fd. + * + * @param fd File descriptor to print to - e.g. 0 for stdout + * @param handle The counter to print. + */ +__EXPORT extern void perf_print_counter_fd(int fd, perf_counter_t handle); + +/** * Print all of the performance counters. + * + * @param fd File descriptor to print to - e.g. 0 for stdout */ -__EXPORT extern void perf_print_all(void); +__EXPORT extern void perf_print_all(int fd); /** * Reset all of the performance counters. diff --git a/src/modules/systemlib/pwm_limit/pwm_limit.c b/src/modules/systemlib/pwm_limit/pwm_limit.c index 190b315f1..ea5ba9e52 100644 --- a/src/modules/systemlib/pwm_limit/pwm_limit.c +++ b/src/modules/systemlib/pwm_limit/pwm_limit.c @@ -136,12 +136,26 @@ void pwm_limit_calc(const bool armed, const unsigned num_channels, const uint16_ } effective_pwm[i] = output[i] * (max_pwm[i] - ramp_min_pwm)/2 + (max_pwm[i] + ramp_min_pwm)/2; + + /* last line of defense against invalid inputs */ + if (effective_pwm[i] < ramp_min_pwm) { + effective_pwm[i] = ramp_min_pwm; + } else if (effective_pwm[i] > max_pwm[i]) { + effective_pwm[i] = max_pwm[i]; + } } } break; case PWM_LIMIT_STATE_ON: for (unsigned i=0; i<num_channels; i++) { effective_pwm[i] = output[i] * (max_pwm[i] - min_pwm[i])/2 + (max_pwm[i] + min_pwm[i])/2; + + /* last line of defense against invalid inputs */ + if (effective_pwm[i] < min_pwm[i]) { + effective_pwm[i] = min_pwm[i]; + } else if (effective_pwm[i] > max_pwm[i]) { + effective_pwm[i] = max_pwm[i]; + } } break; default: diff --git a/src/modules/uORB/topics/vehicle_gps_position.h b/src/modules/uORB/topics/vehicle_gps_position.h index 794c3f8bc..5924a324d 100644 --- a/src/modules/uORB/topics/vehicle_gps_position.h +++ b/src/modules/uORB/topics/vehicle_gps_position.h @@ -68,6 +68,9 @@ struct vehicle_gps_position_s { float eph_m; /**< GPS HDOP horizontal dilution of position in m */ float epv_m; /**< GPS VDOP horizontal dilution of position in m */ + unsigned noise_per_ms; /**< */ + unsigned jamming_indicator; /**< */ + uint64_t timestamp_velocity; /**< Timestamp for velocity informations */ float vel_m_s; /**< GPS ground speed (m/s) */ float vel_n_m_s; /**< GPS ground speed in m/s */ @@ -85,7 +88,7 @@ struct vehicle_gps_position_s { uint8_t satellite_used[20]; /**< 0: Satellite not used, 1: used for localization */ uint8_t satellite_elevation[20]; /**< Elevation (0: right on top of receiver, 90: on the horizon) of satellite */ uint8_t satellite_azimuth[20]; /**< Direction of satellite, 0: 0 deg, 255: 360 deg. */ - uint8_t satellite_snr[20]; /**< Signal to noise ratio of satellite */ + uint8_t satellite_snr[20]; /**< dBHz, Signal to noise ratio of satellite C/N0, range 0..99, zero when not tracking this satellite. */ bool satellite_info_available; /**< 0 for no info, 1 for info available */ }; diff --git a/src/systemcmds/config/config.c b/src/systemcmds/config/config.c index e6d4b763b..4a97d328c 100644 --- a/src/systemcmds/config/config.c +++ b/src/systemcmds/config/config.c @@ -1,8 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * Author: Julian Oes <joes@student.ethz.ch> + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -94,7 +92,6 @@ do_device(int argc, char *argv[]) } int fd; - int ret; fd = open(argv[0], 0); @@ -104,6 +101,8 @@ do_device(int argc, char *argv[]) } else { + int ret; + if (argc == 2 && !strcmp(argv[1], "block")) { /* disable the device publications */ @@ -132,7 +131,6 @@ static void do_gyro(int argc, char *argv[]) { int fd; - int ret; fd = open(GYRO_DEVICE_PATH, 0); @@ -142,6 +140,8 @@ do_gyro(int argc, char *argv[]) } else { + int ret; + if (argc == 2 && !strcmp(argv[0], "sampling")) { /* set the gyro internal sampling rate up to at least i Hz */ @@ -173,8 +173,13 @@ do_gyro(int argc, char *argv[]) warnx("gyro self test FAILED! Check calibration:"); struct gyro_scale scale; ret = ioctl(fd, GYROIOCGSCALE, (long unsigned int)&scale); - warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_offset, scale.y_offset, scale.z_offset); - warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_scale, scale.y_scale, scale.z_scale); + + if (ret) { + err(1, "failed getting gyro scale"); + } + + warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_offset, (double)scale.y_offset, (double)scale.z_offset); + warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_scale, (double)scale.y_scale, (double)scale.z_scale); } else { warnx("gyro calibration and self test OK"); } @@ -199,7 +204,6 @@ static void do_mag(int argc, char *argv[]) { int fd; - int ret; fd = open(MAG_DEVICE_PATH, 0); @@ -209,6 +213,8 @@ do_mag(int argc, char *argv[]) } else { + int ret; + if (argc == 2 && !strcmp(argv[0], "sampling")) { /* set the mag internal sampling rate up to at least i Hz */ @@ -240,8 +246,13 @@ do_mag(int argc, char *argv[]) warnx("mag self test FAILED! Check calibration:"); struct mag_scale scale; ret = ioctl(fd, MAGIOCGSCALE, (long unsigned int)&scale); - warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_offset, scale.y_offset, scale.z_offset); - warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_scale, scale.y_scale, scale.z_scale); + + if (ret) { + err(ret, "failed getting mag scale"); + } + + warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_offset, (double)scale.y_offset, (double)scale.z_offset); + warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_scale, (double)scale.y_scale, (double)scale.z_scale); } else { warnx("mag calibration and self test OK"); } @@ -266,7 +277,6 @@ static void do_accel(int argc, char *argv[]) { int fd; - int ret; fd = open(ACCEL_DEVICE_PATH, 0); @@ -276,6 +286,8 @@ do_accel(int argc, char *argv[]) } else { + int ret; + if (argc == 2 && !strcmp(argv[0], "sampling")) { /* set the accel internal sampling rate up to at least i Hz */ @@ -307,8 +319,13 @@ do_accel(int argc, char *argv[]) warnx("accel self test FAILED! Check calibration:"); struct accel_scale scale; ret = ioctl(fd, ACCELIOCGSCALE, (long unsigned int)&scale); - warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_offset, scale.y_offset, scale.z_offset); - warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", scale.x_scale, scale.y_scale, scale.z_scale); + + if (ret) { + err(ret, "failed getting accel scale"); + } + + warnx("offsets: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_offset, (double)scale.y_offset, (double)scale.z_offset); + warnx("scale: X: % 9.6f Y: % 9.6f Z: % 9.6f", (double)scale.x_scale, (double)scale.y_scale, (double)scale.z_scale); } else { warnx("accel calibration and self test OK"); } diff --git a/src/systemcmds/perf/perf.c b/src/systemcmds/perf/perf.c index b69ea597b..b08a2e3b7 100644 --- a/src/systemcmds/perf/perf.c +++ b/src/systemcmds/perf/perf.c @@ -73,7 +73,7 @@ int perf_main(int argc, char *argv[]) return -1; } - perf_print_all(); + perf_print_all(0 /* stdout */); fflush(stdout); return 0; } diff --git a/src/systemcmds/tests/test_mtd.c b/src/systemcmds/tests/test_mtd.c index bac9efbdb..cdb4362ba 100644 --- a/src/systemcmds/tests/test_mtd.c +++ b/src/systemcmds/tests/test_mtd.c @@ -57,6 +57,8 @@ #define PARAM_FILE_NAME "/fs/mtd_params" static int check_user_abort(int fd); +static void print_fail(void); +static void print_success(void); int check_user_abort(int fd) { /* check if user wants to abort */ @@ -126,7 +128,7 @@ test_mtd(int argc, char *argv[]) uint8_t write_buf[chunk_sizes[c]] __attribute__((aligned(64))); /* fill write buffer with known values */ - for (int i = 0; i < sizeof(write_buf); i++) { + for (unsigned i = 0; i < sizeof(write_buf); i++) { /* this will wrap, but we just need a known value with spacing */ write_buf[i] = i+11; } @@ -137,11 +139,14 @@ test_mtd(int argc, char *argv[]) int fd = open(PARAM_FILE_NAME, O_RDONLY); int rret = read(fd, read_buf, chunk_sizes[c]); close(fd); + if (rret <= 0) { + err(1, "read error"); + } fd = open(PARAM_FILE_NAME, O_WRONLY); printf("printing 2 percent of the first chunk:\n"); - for (int i = 0; i < sizeof(read_buf) / 50; i++) { + for (unsigned i = 0; i < sizeof(read_buf) / 50; i++) { printf("%02X", read_buf[i]); } printf("\n"); @@ -171,9 +176,9 @@ test_mtd(int argc, char *argv[]) /* read back data for validation */ for (unsigned i = 0; i < iterations; i++) { - int rret = read(fd, read_buf, chunk_sizes[c]); + int rret2 = read(fd, read_buf, chunk_sizes[c]); - if (rret != chunk_sizes[c]) { + if (rret2 != (int)chunk_sizes[c]) { warnx("READ ERROR!"); print_fail(); return 1; @@ -182,7 +187,7 @@ test_mtd(int argc, char *argv[]) /* compare value */ bool compare_ok = true; - for (int j = 0; j < chunk_sizes[c]; j++) { + for (unsigned j = 0; j < chunk_sizes[c]; j++) { if (read_buf[j] != write_buf[j]) { warnx("COMPARISON ERROR: byte %d", j); print_fail(); @@ -211,7 +216,7 @@ test_mtd(int argc, char *argv[]) char ffbuf[64]; memset(ffbuf, 0xFF, sizeof(ffbuf)); int fd = open(PARAM_FILE_NAME, O_WRONLY); - for (int i = 0; i < file_size / sizeof(ffbuf); i++) { + for (unsigned i = 0; i < file_size / sizeof(ffbuf); i++) { int ret = write(fd, ffbuf, sizeof(ffbuf)); if (ret != sizeof(ffbuf)) { diff --git a/src/systemcmds/tests/tests_main.c b/src/systemcmds/tests/tests_main.c index fe22f6177..e3f26924f 100644 --- a/src/systemcmds/tests/tests_main.c +++ b/src/systemcmds/tests/tests_main.c @@ -235,7 +235,7 @@ test_perf(int argc, char *argv[]) printf("perf: expect count of 1\n"); perf_print_counter(ec); printf("perf: expect at least two counters\n"); - perf_print_all(); + perf_print_all(0); perf_free(cc); perf_free(ec); |