1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
|
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
* Author: @author Lorenz Meier <lm@inf.ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file sensors.cpp
*
* Sensor readout process.
*/
#include <nuttx/config.h>
#include <fcntl.h>
#include <poll.h>
#include <nuttx/analog/adc.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <stdbool.h>
#include <stdio.h>
#include <errno.h>
#include <arch/board/up_hrt.h>
#include <drivers/drv_accel.h>
#include <drivers/drv_gyro.h>
#include <drivers/drv_mag.h>
#include <drivers/drv_baro.h>
#include <arch/board/up_adc.h>
#include <systemlib/systemlib.h>
#include <systemlib/param/param.h>
#include <systemlib/err.h>
#include <systemlib/perf_counter.h>
#include <uORB/uORB.h>
#include <uORB/topics/sensor_combined.h>
#include <uORB/topics/rc_channels.h>
#include <uORB/topics/manual_control_setpoint.h>
#include <uORB/topics/vehicle_status.h>
#include <uORB/topics/parameter_update.h>
#define GYRO_HEALTH_COUNTER_LIMIT_ERROR 20 /* 40 ms downtime at 500 Hz update rate */
#define ACC_HEALTH_COUNTER_LIMIT_ERROR 20 /* 40 ms downtime at 500 Hz update rate */
#define MAGN_HEALTH_COUNTER_LIMIT_ERROR 100 /* 1000 ms downtime at 100 Hz update rate */
#define BARO_HEALTH_COUNTER_LIMIT_ERROR 50 /* 500 ms downtime at 100 Hz update rate */
#define ADC_HEALTH_COUNTER_LIMIT_ERROR 10 /* 100 ms downtime at 100 Hz update rate */
#define GYRO_HEALTH_COUNTER_LIMIT_OK 5
#define ACC_HEALTH_COUNTER_LIMIT_OK 5
#define MAGN_HEALTH_COUNTER_LIMIT_OK 5
#define BARO_HEALTH_COUNTER_LIMIT_OK 5
#define ADC_HEALTH_COUNTER_LIMIT_OK 5
#define ADC_BATTERY_VOLATGE_CHANNEL 10
#define BAT_VOL_INITIAL 12.f
#define BAT_VOL_LOWPASS_1 0.99f
#define BAT_VOL_LOWPASS_2 0.01f
#define VOLTAGE_BATTERY_IGNORE_THRESHOLD_VOLTS 3.5f
#ifdef CONFIG_HRT_PPM
extern "C" {
extern uint16_t ppm_buffer[];
extern unsigned ppm_decoded_channels;
extern uint64_t ppm_last_valid_decode;
}
/* PPM Settings */
# define PPM_MIN 1000
# define PPM_MAX 2000
/* Internal resolution is 10000 */
# define PPM_SCALE 10000/((PPM_MAX-PPM_MIN)/2)
# define PPM_MID (PPM_MIN+PPM_MAX)/2
#endif
/**
* Sensor app start / stop handling function
*
* @ingroup apps
*/
extern "C" __EXPORT int sensors_main(int argc, char *argv[]);
class Sensors
{
public:
/**
* Constructor
*/
Sensors();
/**
* Destructor, also kills the sensors task.
*/
~Sensors();
/**
* Start the sensors task.
*
* @return OK on success.
*/
int start();
private:
static const unsigned _rc_max_chan_count = 8; /**< maximum number of r/c channels we handle */
/* legacy sensor descriptors */
int _fd_bma180; /**< old accel driver */
int _fd_gyro_l3gd20; /**< old gyro driver */
#if CONFIG_HRT_PPM
hrt_abstime _ppm_last_valid; /**< last time we got a valid ppm signal */
/**
* Gather and publish PPM input data.
*/
void ppm_poll();
#endif
/* XXX should not be here - should be own driver */
int _fd_adc; /**< ADC driver handle */
hrt_abstime _last_adc; /**< last time we took input from the ADC */
bool _task_should_exit; /**< if true, sensor task should exit */
int _sensors_task; /**< task handle for sensor task */
bool _hil_enabled; /**< if true, HIL is active */
bool _publishing; /**< if true, we are publishing sensor data */
int _gyro_sub; /**< raw gyro data subscription */
int _accel_sub; /**< raw accel data subscription */
int _mag_sub; /**< raw mag data subscription */
int _baro_sub; /**< raw baro data subscription */
int _vstatus_sub; /**< vehicle status subscription */
int _params_sub; /**< notification of parameter updates */
orb_advert_t _sensor_pub; /**< combined sensor data topic */
orb_advert_t _manual_control_pub; /**< manual control signal topic */
orb_advert_t _rc_pub; /**< raw r/c control topic */
perf_counter_t _loop_perf; /**< loop performance counter */
struct rc_channels_s _rc; /**< r/c channel data */
struct {
float min[_rc_max_chan_count];
float trim[_rc_max_chan_count];
float max[_rc_max_chan_count];
float rev[_rc_max_chan_count];
float gyro_offset[3];
float mag_offset[3];
float acc_offset[3];
int rc_type;
int rc_map_roll;
int rc_map_pitch;
int rc_map_yaw;
int rc_map_throttle;
int rc_map_mode_sw;
float battery_voltage_scaling;
} _parameters; /**< local copies of interesting parameters */
struct {
param_t min[_rc_max_chan_count];
param_t trim[_rc_max_chan_count];
param_t max[_rc_max_chan_count];
param_t rev[_rc_max_chan_count];
param_t rc_type;
param_t gyro_offset[3];
param_t mag_offset[3];
param_t acc_offset[3];
param_t rc_map_roll;
param_t rc_map_pitch;
param_t rc_map_yaw;
param_t rc_map_throttle;
param_t rc_map_mode_sw;
param_t battery_voltage_scaling;
} _parameter_handles; /**< handles for interesting parameters */
/**
* Update our local parameter cache.
*/
int parameters_update();
/**
* Do accel-related initialisation.
*/
void accel_init();
/**
* Do gyro-related initialisation.
*/
void gyro_init();
/**
* Do mag-related initialisation.
*/
void mag_init();
/**
* Do baro-related initialisation.
*/
void baro_init();
/**
* Do adc-related initialisation.
*/
void adc_init();
/**
* Poll the accelerometer for updated data.
*
* @param raw Combined sensor data structure into which
* data should be returned.
*/
void accel_poll(struct sensor_combined_s &raw);
/**
* Poll the gyro for updated data.
*
* @param raw Combined sensor data structure into which
* data should be returned.
*/
void gyro_poll(struct sensor_combined_s &raw);
/**
* Poll the magnetometer for updated data.
*
* @param raw Combined sensor data structure into which
* data should be returned.
*/
void mag_poll(struct sensor_combined_s &raw);
/**
* Poll the barometer for updated data.
*
* @param raw Combined sensor data structure into which
* data should be returned.
*/
void baro_poll(struct sensor_combined_s &raw);
/**
* Check for changes in vehicle status.
*/
void vehicle_status_poll();
/**
* Check for changes in parameters.
*/
void parameter_update_poll(bool forced = false);
/**
* Poll the ADC and update readings to suit.
*
* @param raw Combined sensor data structure into which
* data should be returned.
*/
void adc_poll(struct sensor_combined_s &raw);
/**
* Shim for calling task_main from task_create.
*/
static void task_main_trampoline(int argc, char *argv[]);
/**
* Main sensor collection task.
*/
void task_main() __attribute__((noreturn));
};
namespace sensors
{
/* oddly, ERROR is not defined for c++ */
#ifdef ERROR
# undef ERROR
#endif
static const int ERROR = -1;
Sensors *g_sensors;
}
Sensors::Sensors() :
_fd_bma180(-1),
_fd_gyro_l3gd20(-1),
_ppm_last_valid(0),
_fd_adc(-1),
_last_adc(0),
_task_should_exit(false),
_sensors_task(-1),
_hil_enabled(false),
_publishing(true),
/* subscriptions */
_gyro_sub(-1),
_accel_sub(-1),
_mag_sub(-1),
_baro_sub(-1),
_vstatus_sub(-1),
_params_sub(-1),
/* publications */
_sensor_pub(-1),
_manual_control_pub(-1),
_rc_pub(-1),
/* performance counters */
_loop_perf(perf_alloc(PC_ELAPSED, "sensor task update"))
{
_parameter_handles.min[0] = param_find("RC1_MIN");
_parameter_handles.max[0] = param_find("RC1_MAX");
_parameter_handles.trim[0] = param_find("RC1_TRIM");
_parameter_handles.rev[0] = param_find("RC1_REV");
/* basic r/c parameters */
for (unsigned i = 1; i < _rc_max_chan_count; i++) {
char nbuf[16];
/* min values */
sprintf(nbuf, "RC%d_MIN", i + 1);
_parameter_handles.min[i] = param_find(nbuf);
/* trim values */
sprintf(nbuf, "RC%d_TRIM", i + 1);
_parameter_handles.trim[i] = param_find(nbuf);
/* max values */
sprintf(nbuf, "RC%d_MAX", i + 1);
_parameter_handles.max[i] = param_find(nbuf);
/* channel reverse */
sprintf(nbuf, "RC%d_REV", i + 1);
_parameter_handles.rev[i] = param_find(nbuf);
}
_parameter_handles.rc_type = param_find("RC_TYPE");
_parameter_handles.rc_map_roll = param_find("RC_MAP_ROLL");
_parameter_handles.rc_map_pitch = param_find("RC_MAP_PITCH");
_parameter_handles.rc_map_yaw = param_find("RC_MAP_YAW");
_parameter_handles.rc_map_throttle = param_find("RC_MAP_THROTTLE");
_parameter_handles.rc_map_mode_sw = param_find("RC_MAP_MODE_SW");
/* gyro offsets */
_parameter_handles.gyro_offset[0] = param_find("SENSOR_GYRO_XOFF");
_parameter_handles.gyro_offset[1] = param_find("SENSOR_GYRO_YOFF");
_parameter_handles.gyro_offset[2] = param_find("SENSOR_GYRO_ZOFF");
/* accel offsets */
_parameter_handles.acc_offset[0] = param_find("SENSOR_ACC_XOFF");
_parameter_handles.acc_offset[1] = param_find("SENSOR_ACC_YOFF");
_parameter_handles.acc_offset[2] = param_find("SENSOR_ACC_ZOFF");
/* mag offsets */
_parameter_handles.mag_offset[0] = param_find("SENSOR_MAG_XOFF");
_parameter_handles.mag_offset[1] = param_find("SENSOR_MAG_YOFF");
_parameter_handles.mag_offset[2] = param_find("SENSOR_MAG_ZOFF");
_parameter_handles.battery_voltage_scaling = param_find("BAT_V_SCALING");
/* fetch initial parameter values */
parameters_update();
}
Sensors::~Sensors()
{
if (_sensors_task != -1) {
/* task wakes up every 100ms or so at the longest */
_task_should_exit = true;
/* wait for a second for the task to quit at our request */
unsigned i = 0;
do {
/* wait 20ms */
usleep(20000);
/* if we have given up, kill it */
if (++i > 50) {
task_delete(_sensors_task);
break;
}
} while (_sensors_task != -1);
}
sensors::g_sensors = nullptr;
}
int
Sensors::parameters_update()
{
const unsigned int nchans = 8;
/* min values */
for (unsigned int i = 0; i < nchans; i++) {
if (param_get(_parameter_handles.min[i], &(_parameters.min[i])) != OK) {
warnx("Failed getting min for chan %d", i);
}
}
/* trim values */
for (unsigned int i = 0; i < nchans; i++) {
if (param_get(_parameter_handles.trim[i], &(_parameters.trim[i])) != OK) {
warnx("Failed getting trim for chan %d", i);
}
}
/* max values */
for (unsigned int i = 0; i < nchans; i++) {
if (param_get(_parameter_handles.max[i], &(_parameters.max[i])) != OK) {
warnx("Failed getting max for chan %d", i);
}
}
/* channel reverse */
for (unsigned int i = 0; i < nchans; i++) {
if (param_get(_parameter_handles.rev[i], &(_parameters.rev[i])) != OK) {
warnx("Failed getting rev for chan %d", i);
}
}
/* remote control type */
if (param_get(_parameter_handles.rc_type, &(_parameters.rc_type)) != OK) {
warnx("Failed getting remote control type");
}
/* channel mapping */
if (param_get(_parameter_handles.rc_map_roll, &(_parameters.rc_map_roll)) != OK) {
warnx("Failed getting roll chan index");
}
if (param_get(_parameter_handles.rc_map_pitch, &(_parameters.rc_map_pitch)) != OK) {
warnx("Failed getting pitch chan index");
}
if (param_get(_parameter_handles.rc_map_yaw, &(_parameters.rc_map_yaw)) != OK) {
warnx("Failed getting yaw chan index");
}
if (param_get(_parameter_handles.rc_map_throttle, &(_parameters.rc_map_throttle)) != OK) {
warnx("Failed getting throttle chan index");
}
if (param_get(_parameter_handles.rc_map_mode_sw, &(_parameters.rc_map_mode_sw)) != OK) {
warnx("Failed getting mode sw chan index");
}
/* gyro offsets */
param_get(_parameter_handles.gyro_offset[0], &(_parameters.gyro_offset[0]));
param_get(_parameter_handles.gyro_offset[1], &(_parameters.gyro_offset[1]));
param_get(_parameter_handles.gyro_offset[2], &(_parameters.gyro_offset[2]));
/* accel offsets */
param_get(_parameter_handles.acc_offset[0], &(_parameters.acc_offset[0]));
param_get(_parameter_handles.acc_offset[1], &(_parameters.acc_offset[1]));
param_get(_parameter_handles.acc_offset[2], &(_parameters.acc_offset[2]));
/* mag offsets */
param_get(_parameter_handles.mag_offset[0], &(_parameters.mag_offset[0]));
param_get(_parameter_handles.mag_offset[1], &(_parameters.mag_offset[1]));
param_get(_parameter_handles.mag_offset[2], &(_parameters.mag_offset[2]));
/* scaling of ADC ticks to battery voltage */
if (param_get(_parameter_handles.battery_voltage_scaling, &(_parameters.battery_voltage_scaling)) != OK) {
warnx("Failed updating voltage scaling param");
}
return OK;
}
void
Sensors::accel_init()
{
int fd;
fd = open(ACCEL_DEVICE_PATH, 0);
if (fd < 0) {
warn("%s", ACCEL_DEVICE_PATH);
/* fall back to bma180 here (new driver would be better...) */
_fd_bma180 = open("/dev/bma180", O_RDONLY);
if (_fd_bma180 < 0) {
warn("/dev/bma180");
errx(1, "FATAL: no accelerometer found");
}
/* discard first (junk) reading */
int16_t junk_buf[3];
read(_fd_bma180, junk_buf, sizeof(junk_buf));
warnx("using BMA180");
} else {
/* set the accel internal sampling rate up to at leat 500Hz */
if (OK != ioctl(fd, ACCELIOCSSAMPLERATE, 500))
warn("WARNING: failed to set minimum 500Hz sample rate for accel");
/* set the driver to poll at 500Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 500))
warn("WARNING: failed to set 500Hz poll rate for accel");
warnx("using system accel");
close(fd);
}
}
void
Sensors::gyro_init()
{
int fd;
fd = open(GYRO_DEVICE_PATH, 0);
if (fd < 0) {
warn("%s", GYRO_DEVICE_PATH);
/* fall back to bma180 here (new driver would be better...) */
_fd_gyro_l3gd20 = open("/dev/l3gd20", O_RDONLY);
if (_fd_gyro_l3gd20 < 0) {
warn("/dev/l3gd20");
errx(1, "FATAL: no gyro found");
}
/* discard first (junk) reading */
int16_t junk_buf[3];
read(_fd_gyro_l3gd20, junk_buf, sizeof(junk_buf));
warn("using L3GD20");
} else {
/* set the gyro internal sampling rate up to at leat 500Hz */
if (OK != ioctl(fd, GYROIOCSSAMPLERATE, 500))
warn("WARNING: failed to set minimum 500Hz sample rate for gyro");
/* set the driver to poll at 500Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 500))
warn("WARNING: failed to set 500Hz poll rate for gyro");
warnx("using system gyro");
close(fd);
}
}
void
Sensors::mag_init()
{
int fd;
fd = open(MAG_DEVICE_PATH, 0);
if (fd < 0) {
warn("%s", MAG_DEVICE_PATH);
errx(1, "FATAL: no magnetometer found");
}
/* set the mag internal poll rate to at least 150Hz */
if (OK != ioctl(fd, MAGIOCSSAMPLERATE, 150))
warn("WARNING: failed to set minimum 150Hz sample rate for mag");
/* set the driver to poll at 150Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 150))
warn("WARNING: failed to set 150Hz poll rate for mag");
close(fd);
}
void
Sensors::baro_init()
{
int fd;
fd = open(BARO_DEVICE_PATH, 0);
if (fd < 0) {
warn("%s", BARO_DEVICE_PATH);
errx(1, "FATAL: no barometer found");
}
/* set the driver to poll at 150Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 150))
warn("WARNING: failed to set 150Hz poll rate for baro");
close(fd);
}
void
Sensors::adc_init()
{
_fd_adc = open("/dev/adc0", O_RDONLY | O_NONBLOCK);
if (_fd_adc < 0) {
warn("/dev/adc0");
errx(1, "FATAL: no ADC found");
}
}
void
Sensors::accel_poll(struct sensor_combined_s &raw)
{
struct accel_report accel_report;
if (_fd_bma180 >= 0) {
/* do ORB emulation for BMA180 */
int16_t buf[3];
read(_fd_bma180, buf, sizeof(buf));
accel_report.timestamp = hrt_absolute_time();
accel_report.x_raw = (buf[1] == -32768) ? 32767 : -buf[1];
accel_report.y_raw = buf[0];
accel_report.z_raw = buf[2];
const float range_g = 4.0f;
/* scale from 14 bit to m/s2 */
accel_report.x = (((accel_report.x_raw - _parameters.acc_offset[0]) * range_g) / 8192.0f) / 9.81f;
accel_report.y = (((accel_report.y_raw - _parameters.acc_offset[0]) * range_g) / 8192.0f) / 9.81f;
accel_report.z = (((accel_report.z_raw - _parameters.acc_offset[0]) * range_g) / 8192.0f) / 9.81f;
} else {
orb_copy(ORB_ID(sensor_accel), _accel_sub, &accel_report);
}
raw.accelerometer_m_s2[0] = accel_report.x;
raw.accelerometer_m_s2[1] = accel_report.y;
raw.accelerometer_m_s2[2] = accel_report.z;
raw.accelerometer_raw[0] = accel_report.x_raw;
raw.accelerometer_raw[1] = accel_report.y_raw;
raw.accelerometer_raw[2] = accel_report.z_raw;
raw.accelerometer_raw_counter++;
}
void
Sensors::gyro_poll(struct sensor_combined_s &raw)
{
struct gyro_report gyro_report;
if (_fd_gyro_l3gd20 >= 0) {
/* do ORB emulation for L3GD20 */
int16_t buf[3];
read(_fd_gyro_l3gd20, buf, sizeof(buf));
gyro_report.timestamp = hrt_absolute_time();
gyro_report.x_raw = buf[1];
gyro_report.y_raw = ((buf[0] == -32768) ? 32767 : -buf[0]);
gyro_report.z_raw = buf[2];
/* scaling calculated as: raw * (1/(32768*(500/180*PI))) */
gyro_report.x = (gyro_report.x_raw - _parameters.gyro_offset[0]) * 0.000266316109f;
gyro_report.y = (gyro_report.y_raw - _parameters.gyro_offset[1]) * 0.000266316109f;
gyro_report.z = (gyro_report.z_raw - _parameters.gyro_offset[2]) * 0.000266316109f;
} else {
orb_copy(ORB_ID(sensor_gyro), _gyro_sub, &gyro_report);
raw.gyro_rad_s[0] = gyro_report.x;
raw.gyro_rad_s[1] = gyro_report.y;
raw.gyro_rad_s[2] = gyro_report.z;
raw.gyro_raw[0] = gyro_report.x_raw;
raw.gyro_raw[1] = gyro_report.y_raw;
raw.gyro_raw[2] = gyro_report.z_raw;
raw.gyro_raw_counter++;
}
}
void
Sensors::mag_poll(struct sensor_combined_s &raw)
{
struct mag_report mag_report;
orb_copy(ORB_ID(sensor_mag), _mag_sub, &mag_report);
raw.magnetometer_ga[0] = mag_report.x;
raw.magnetometer_ga[1] = mag_report.y;
raw.magnetometer_ga[2] = mag_report.z;
raw.magnetometer_raw[0] = mag_report.x_raw;
raw.magnetometer_raw[1] = mag_report.y_raw;
raw.magnetometer_raw[2] = mag_report.z_raw;
raw.magnetometer_raw_counter++;
}
void
Sensors::baro_poll(struct sensor_combined_s &raw)
{
struct baro_report baro_report;
orb_copy(ORB_ID(sensor_baro), _baro_sub, &baro_report);
raw.baro_pres_mbar = baro_report.pressure; // Pressure in mbar
raw.baro_alt_meter = baro_report.altitude; // Altitude in meters
raw.baro_temp_celcius = baro_report.temperature; // Temperature in degrees celcius
raw.baro_raw_counter++;
}
void
Sensors::vehicle_status_poll()
{
struct vehicle_status_s vstatus;
bool vstatus_updated;
/* Check HIL state if vehicle status has changed */
orb_check(_vstatus_sub, &vstatus_updated);
if (vstatus_updated) {
orb_copy(ORB_ID(vehicle_status), _vstatus_sub, &vstatus);
/* switching from non-HIL to HIL mode */
//printf("[sensors] Vehicle mode: %i \t AND: %i, HIL: %i\n", vstatus.mode, vstatus.mode & VEHICLE_MODE_FLAG_HIL_ENABLED, hil_enabled);
if (vstatus.flag_hil_enabled && !_hil_enabled) {
_hil_enabled = true;
_publishing = false;
/* switching from HIL to non-HIL mode */
} else if (!_publishing && !_hil_enabled) {
_hil_enabled = false;
_publishing = true;
}
}
}
void
Sensors::parameter_update_poll(bool forced)
{
bool param_updated;
/* Check if any parameter has changed */
orb_check(_params_sub, ¶m_updated);
if (param_updated || forced)
{
/* read from param to clear updated flag */
struct parameter_update_s update;
orb_copy(ORB_ID(parameter_update), _params_sub, &update);
printf("PARAMS UPDATED\n");
/* update parameters */
parameters_update();
/* update sensor offsets */
int fd = open(GYRO_DEVICE_PATH, 0);
struct gyro_scale gscale = {
_parameters.gyro_offset[0],
1.0f,
_parameters.gyro_offset[1],
1.0f,
_parameters.gyro_offset[2],
1.0f,
};
if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale))
warn("WARNING: failed to set scale / offsets for gyro");
close(fd);
fd = open(ACCEL_DEVICE_PATH, 0);
struct accel_scale ascale = {
_parameters.acc_offset[0],
1.0f,
_parameters.acc_offset[1],
1.0f,
_parameters.acc_offset[2],
1.0f,
};
if (OK != ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&ascale))
warn("WARNING: failed to set scale / offsets for accel");
close(fd);
fd = open(MAG_DEVICE_PATH, 0);
struct mag_scale mscale = {
_parameters.mag_offset[0],
1.0f,
_parameters.mag_offset[1],
1.0f,
_parameters.mag_offset[2],
1.0f,
};
if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale))
warn("WARNING: failed to set scale / offsets for mag");
close(fd);
/* update RC scalings and function mappings */
_rc.chan[0].scaling_factor = (1.0f / ((_parameters.max[0] - _parameters.min[0]) / 2.0f) * _parameters.rev[0]);
_rc.chan[0].mid = _parameters.trim[0];
_rc.chan[1].scaling_factor = (1.0f / ((_parameters.max[1] - _parameters.min[1]) / 2.0f) * _parameters.rev[1]);
_rc.chan[1].mid = _parameters.trim[1];
_rc.chan[2].scaling_factor = (1.0f / ((_parameters.max[2] - _parameters.min[2]) / 2.0f) * _parameters.rev[2]);
_rc.chan[2].mid = _parameters.trim[2];
_rc.chan[3].scaling_factor = (1.0f / ((_parameters.max[3] - _parameters.min[3]) / 2.0f) * _parameters.rev[3]);
_rc.chan[3].mid = _parameters.trim[3];
_rc.chan[4].scaling_factor = (1.0f / ((_parameters.max[4] - _parameters.min[4]) / 2.0f) * _parameters.rev[4]);
_rc.chan[4].mid = _parameters.trim[4];
_rc.chan[5].scaling_factor = (1.0f / ((_parameters.max[5] - _parameters.min[5]) / 2.0f) * _parameters.rev[5]);
_rc.chan[5].mid = _parameters.trim[5];
_rc.chan[6].scaling_factor = (1.0f / ((_parameters.max[6] - _parameters.min[6]) / 2.0f) * _parameters.rev[6]);
_rc.chan[6].mid = _parameters.trim[6];
_rc.chan[7].scaling_factor = (1.0f / ((_parameters.max[7] - _parameters.min[7]) / 2.0f) * _parameters.rev[7]);
_rc.chan[7].mid = _parameters.trim[7];
_rc.function[0] = _parameters.rc_map_throttle - 1;
_rc.function[1] = _parameters.rc_map_roll - 1;
_rc.function[2] = _parameters.rc_map_pitch - 1;
_rc.function[3] = _parameters.rc_map_yaw - 1;
_rc.function[4] = _parameters.rc_map_mode_sw - 1;
#if 1
printf("CH0: RAW MAX: %d MIN %d S: %d MID: %d FUNC: %d\n", (int)_parameters.max[0], (int)_parameters.min[0], (int)(_rc.chan[0].scaling_factor*100), (int)(_rc.chan[0].mid*100), (int)_rc.function[0]);
printf("CH1: RAW MAX: %d MIN %d S: %d MID: %d FUNC: %d\n", (int)_parameters.max[1], (int)_parameters.min[1], (int)(_rc.chan[1].scaling_factor*100), (int)(_rc.chan[1].mid*100), (int)_rc.function[1]);
printf("MAN: %d %d\n", (int)(_rc.chan[0].scaled*100), (int)(_rc.chan[1].scaled*100));
fflush(stdout);
usleep(5000);
#endif
}
}
void
Sensors::adc_poll(struct sensor_combined_s &raw)
{
#pragma pack(push,1)
struct adc_msg4_s {
uint8_t am_channel1; /**< The 8-bit ADC Channel 1 */
int32_t am_data1; /**< ADC convert result 1 (4 bytes) */
uint8_t am_channel2; /**< The 8-bit ADC Channel 2 */
int32_t am_data2; /**< ADC convert result 2 (4 bytes) */
uint8_t am_channel3; /**< The 8-bit ADC Channel 3 */
int32_t am_data3; /**< ADC convert result 3 (4 bytes) */
uint8_t am_channel4; /**< The 8-bit ADC Channel 4 */
int32_t am_data4; /**< ADC convert result 4 (4 bytes) */
} buf_adc;
#pragma pack(pop)
if (hrt_absolute_time() - _last_adc >= 10000) {
read(_fd_adc, &buf_adc, sizeof(buf_adc));
if (ADC_BATTERY_VOLATGE_CHANNEL == buf_adc.am_channel1) {
/* Voltage in volts */
raw.battery_voltage_v = (BAT_VOL_LOWPASS_1 * (raw.battery_voltage_v + BAT_VOL_LOWPASS_2 * (buf_adc.am_data1 * _parameters.battery_voltage_scaling)));
if ((buf_adc.am_data1 * _parameters.battery_voltage_scaling) < VOLTAGE_BATTERY_IGNORE_THRESHOLD_VOLTS) {
raw.battery_voltage_valid = false;
raw.battery_voltage_v = 0.f;
} else {
raw.battery_voltage_valid = true;
}
raw.battery_voltage_counter++;
}
_last_adc = hrt_absolute_time();
}
}
#if CONFIG_HRT_PPM
void
Sensors::ppm_poll()
{
struct manual_control_setpoint_s manual_control;
/* check to see whether a new frame has been decoded */
if (_ppm_last_valid == ppm_last_valid_decode)
return;
/* require at least two chanels to consider the signal valid */
if (ppm_decoded_channels < 4)
return;
/* we are accepting this decode */
_ppm_last_valid = ppm_last_valid_decode;
/* Read out values from HRT */
for (unsigned int i = 0; i < ppm_decoded_channels; i++) {
_rc.chan[i].raw = ppm_buffer[i];
/* Set the range to +-, then scale up */
_rc.chan[i].scale = (ppm_buffer[i] - _rc.chan[i].mid) * _rc.chan[i].scaling_factor * 10000;
_rc.chan[i].scaled = (ppm_buffer[i] - _rc.chan[i].mid) * _rc.chan[i].scaling_factor;
}
_rc.chan_count = ppm_decoded_channels;
_rc.timestamp = ppm_last_valid_decode;
/* roll input */
manual_control.roll = _rc.chan[_rc.function[ROLL]].scaled;
if (manual_control.roll < -1.0f) manual_control.roll = -1.0f;
if (manual_control.roll > 1.0f) manual_control.roll = 1.0f;
/* pitch input */
manual_control.pitch = _rc.chan[_rc.function[PITCH]].scaled;
if (manual_control.pitch < -1.0f) manual_control.pitch = -1.0f;
if (manual_control.pitch > 1.0f) manual_control.pitch = 1.0f;
/* yaw input */
manual_control.yaw = _rc.chan[_rc.function[YAW]].scaled;
if (manual_control.yaw < -1.0f) manual_control.yaw = -1.0f;
if (manual_control.yaw > 1.0f) manual_control.yaw = 1.0f;
/* throttle input */
manual_control.throttle = (_rc.chan[_rc.function[THROTTLE]].scaled+1.0f)/2.0f;
if (manual_control.throttle < 0.0f) manual_control.throttle = 0.0f;
if (manual_control.throttle > 1.0f) manual_control.throttle = 1.0f;
/* mode switch input */
manual_control.override_mode_switch = _rc.chan[_rc.function[OVERRIDE]].scaled;
if (manual_control.override_mode_switch < -1.0f) manual_control.override_mode_switch = -1.0f;
if (manual_control.override_mode_switch > 1.0f) manual_control.override_mode_switch = 1.0f;
orb_publish(ORB_ID(rc_channels), _rc_pub, &_rc);
orb_publish(ORB_ID(manual_control_setpoint), _manual_control_pub, &manual_control);
}
#endif
void
Sensors::task_main_trampoline(int argc, char *argv[])
{
sensors::g_sensors->task_main();
}
void
Sensors::task_main()
{
/* inform about start */
printf("[sensors] Initializing..\n");
fflush(stdout);
/* start individual sensors */
accel_init();
gyro_init();
mag_init();
baro_init();
adc_init();
/*
* do subscriptions
*/
_gyro_sub = orb_subscribe(ORB_ID(sensor_gyro));
_accel_sub = orb_subscribe(ORB_ID(sensor_accel));
_mag_sub = orb_subscribe(ORB_ID(sensor_mag));
_baro_sub = orb_subscribe(ORB_ID(sensor_baro));
_vstatus_sub = orb_subscribe(ORB_ID(vehicle_status));
_params_sub = orb_subscribe(ORB_ID(parameter_update));
/* rate limit vehicle status updates to 5Hz */
orb_set_interval(_vstatus_sub, 200);
/*
* do advertisements
*/
struct sensor_combined_s raw;
raw.timestamp = hrt_absolute_time();
raw.battery_voltage_v = BAT_VOL_INITIAL;
raw.adc_voltage_v[0] = 0.9f;
raw.adc_voltage_v[1] = 0.0f;
raw.adc_voltage_v[2] = 0.0f;
raw.battery_voltage_counter = 0;
raw.battery_voltage_valid = false;
/* get a set of initial values */
accel_poll(raw);
gyro_poll(raw);
mag_poll(raw);
baro_poll(raw);
parameter_update_poll(true /* forced */);
/* advertise the sensor_combined topic and make the initial publication */
_sensor_pub = orb_advertise(ORB_ID(sensor_combined), &raw);
/* advertise the manual_control topic */
{
struct manual_control_setpoint_s manual_control;
manual_control.mode = ROLLPOS_PITCHPOS_YAWRATE_THROTTLE;
manual_control.roll = 0.0f;
manual_control.pitch = 0.0f;
manual_control.yaw = 0.0f;
manual_control.throttle = 0.0f;
_manual_control_pub = orb_advertise(ORB_ID(manual_control_setpoint), &manual_control);
}
/* advertise the rc topic */
{
struct rc_channels_s rc;
memset(&rc, 0, sizeof(rc));
_rc_pub = orb_advertise(ORB_ID(rc_channels), &rc);
}
/* wakeup source(s) */
struct pollfd fds[1];
/* use the gyro to pace output - XXX BROKEN if we are using the L3GD20 */
fds[0].fd = _gyro_sub;
fds[0].events = POLLIN;
while (!_task_should_exit) {
/* wait for up to 500ms for data */
int pret = poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 100);
/* timed out - periodic check for _task_should_exit, etc. */
if (pret == 0)
continue;
/* this is undesirable but not much we can do - might want to flag unhappy status */
if (pret < 0) {
warn("poll error %d, %d", pret, errno);
continue;
}
perf_begin(_loop_perf);
/* check vehicle status for changes to publication state */
vehicle_status_poll();
/* check parameters for updates */
parameter_update_poll();
/* store the time closest to all measurements (this is bogus, sensor timestamps should be propagated...) */
raw.timestamp = hrt_absolute_time();
/* copy most recent sensor data */
accel_poll(raw);
gyro_poll(raw);
mag_poll(raw);
baro_poll(raw);
/* check battery voltage */
adc_poll(raw);
/* Inform other processes that new data is available to copy */
if (_publishing)
orb_publish(ORB_ID(sensor_combined), _sensor_pub, &raw);
#ifdef CONFIG_HRT_PPM
/* Look for new r/c input data */
ppm_poll();
#endif
perf_end(_loop_perf);
}
printf("[sensors] exiting.\n");
_sensors_task = -1;
_exit(0);
}
int
Sensors::start()
{
ASSERT(_sensors_task == -1);
/* start the task */
_sensors_task = task_create("sensor_task",
SCHED_PRIORITY_MAX - 5,
4096, /* XXX may be excesssive */
(main_t)&Sensors::task_main_trampoline,
nullptr);
if (_sensors_task < 0) {
warn("task start failed");
return -errno;
}
return OK;
}
int sensors_main(int argc, char *argv[])
{
if (argc < 1)
errx(1, "usage: sensors {start|stop|status}");
if (!strcmp(argv[1], "start")) {
if (sensors::g_sensors != nullptr)
errx(1, "sensors task already running");
sensors::g_sensors = new Sensors;
if (sensors::g_sensors == nullptr)
errx(1, "sensors task alloc failed");
if (OK != sensors::g_sensors->start()) {
delete sensors::g_sensors;
sensors::g_sensors = nullptr;
err(1, "sensors task start failed");
}
exit(0);
}
if (!strcmp(argv[1], "stop")) {
if (sensors::g_sensors == nullptr)
errx(1, "sensors task not running");
delete sensors::g_sensors;
sensors::g_sensors = nullptr;
exit(0);
}
if (!strcmp(argv[1], "status")) {
if (sensors::g_sensors) {
errx(0, "task is running");
} else {
errx(1, "task is not running");
}
}
errx(1, "unrecognized command");
}
|