1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
|
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
* Author: Petri Tanskanen <petri.tanskanen@inf.ethz.ch>
* Lorenz Meier <lm@inf.ethz.ch>
* Thomas Gubler <thomasgubler@student.ethz.ch>
* Julian Oes <joes@student.ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file commander.c
* Main system state machine implementation.
*
* @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch>
* @author Lorenz Meier <lm@inf.ethz.ch>
* @author Thomas Gubler <thomasgubler@student.ethz.ch>
* @author Julian Oes <joes@student.ethz.ch>
*
*/
#include "commander.h"
#include <nuttx/config.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <debug.h>
#include <sys/prctl.h>
#include <string.h>
#include <drivers/drv_led.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_tone_alarm.h>
#include "state_machine_helper.h"
#include "systemlib/systemlib.h"
#include <math.h>
#include <poll.h>
#include <uORB/uORB.h>
#include <uORB/topics/sensor_combined.h>
#include <uORB/topics/battery_status.h>
#include <uORB/topics/manual_control_setpoint.h>
#include <uORB/topics/offboard_control_setpoint.h>
#include <uORB/topics/home_position.h>
#include <uORB/topics/vehicle_global_position.h>
#include <uORB/topics/vehicle_local_position.h>
#include <uORB/topics/vehicle_gps_position.h>
#include <uORB/topics/vehicle_command.h>
#include <uORB/topics/subsystem_info.h>
#include <uORB/topics/actuator_controls.h>
#include <uORB/topics/parameter_update.h>
#include <uORB/topics/differential_pressure.h>
#include <mavlink/mavlink_log.h>
#include <systemlib/param/param.h>
#include <systemlib/systemlib.h>
#include <systemlib/err.h>
/* XXX MOVE CALIBRATION TO SENSORS APP THREAD */
#include <drivers/drv_accel.h>
#include <drivers/drv_gyro.h>
#include <drivers/drv_mag.h>
#include <drivers/drv_baro.h>
#include "calibration_routines.h"
#include "accelerometer_calibration.h"
PARAM_DEFINE_INT32(SYS_FAILSAVE_LL, 0); /**< Go into low-level failsafe after 0 ms */
//PARAM_DEFINE_INT32(SYS_FAILSAVE_HL, 0); /**< Go into high-level failsafe after 0 ms */
PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f);
PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f);
PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f);
#include <systemlib/cpuload.h>
extern struct system_load_s system_load;
/* Decouple update interval and hysteris counters, all depends on intervals */
#define COMMANDER_MONITORING_INTERVAL 50000
#define COMMANDER_MONITORING_LOOPSPERMSEC (1/(COMMANDER_MONITORING_INTERVAL/1000.0f))
#define LOW_VOLTAGE_BATTERY_COUNTER_LIMIT (LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT (CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define STICK_ON_OFF_LIMIT 0.75f
#define STICK_THRUST_RANGE 1.0f
#define STICK_ON_OFF_HYSTERESIS_TIME_MS 1000
#define STICK_ON_OFF_COUNTER_LIMIT (STICK_ON_OFF_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define GPS_FIX_TYPE_2D 2
#define GPS_FIX_TYPE_3D 3
#define GPS_QUALITY_GOOD_HYSTERIS_TIME_MS 5000
#define GPS_QUALITY_GOOD_COUNTER_LIMIT (GPS_QUALITY_GOOD_HYSTERIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
/* File descriptors */
static int leds;
static int buzzer;
static int mavlink_fd;
static bool commander_initialized = false;
static struct vehicle_status_s current_status; /**< Main state machine */
static orb_advert_t stat_pub;
// static uint16_t nofix_counter = 0;
// static uint16_t gotfix_counter = 0;
static unsigned int failsafe_lowlevel_timeout_ms;
static bool thread_should_exit = false; /**< daemon exit flag */
static bool thread_running = false; /**< daemon status flag */
static int daemon_task; /**< Handle of daemon task / thread */
/* pthread loops */
static void *orb_receive_loop(void *arg);
__EXPORT int commander_main(int argc, char *argv[]);
/**
* Mainloop of commander.
*/
int commander_thread_main(int argc, char *argv[]);
static int buzzer_init(void);
static void buzzer_deinit(void);
static int led_init(void);
static void led_deinit(void);
static int led_toggle(int led);
static int led_on(int led);
static int led_off(int led);
static void do_gyro_calibration(int status_pub, struct vehicle_status_s *status);
static void do_mag_calibration(int status_pub, struct vehicle_status_s *status);
static void do_rc_calibration(int status_pub, struct vehicle_status_s *status);
static void handle_command(int status_pub, struct vehicle_status_s *current_status, struct vehicle_command_s *cmd);
int trigger_audio_alarm(uint8_t old_mode, uint8_t old_state, uint8_t new_mode, uint8_t new_state);
/**
* Print the correct usage.
*/
static void usage(const char *reason);
/**
* Sort calibration values.
*
* Sorts the calibration values with bubble sort.
*
* @param a The array to sort
* @param n The number of entries in the array
*/
// static void cal_bsort(float a[], int n);
static int buzzer_init()
{
buzzer = open("/dev/tone_alarm", O_WRONLY);
if (buzzer < 0) {
warnx("Buzzer: open fail\n");
return ERROR;
}
return 0;
}
static void buzzer_deinit()
{
close(buzzer);
}
static int led_init()
{
leds = open(LED_DEVICE_PATH, 0);
if (leds < 0) {
warnx("LED: open fail\n");
return ERROR;
}
if (ioctl(leds, LED_ON, LED_BLUE) || ioctl(leds, LED_ON, LED_AMBER)) {
warnx("LED: ioctl fail\n");
return ERROR;
}
return 0;
}
static void led_deinit()
{
close(leds);
}
static int led_toggle(int led)
{
static int last_blue = LED_ON;
static int last_amber = LED_ON;
if (led == LED_BLUE) last_blue = (last_blue == LED_ON) ? LED_OFF : LED_ON;
if (led == LED_AMBER) last_amber = (last_amber == LED_ON) ? LED_OFF : LED_ON;
return ioctl(leds, ((led == LED_BLUE) ? last_blue : last_amber), led);
}
static int led_on(int led)
{
return ioctl(leds, LED_ON, led);
}
static int led_off(int led)
{
return ioctl(leds, LED_OFF, led);
}
enum AUDIO_PATTERN {
AUDIO_PATTERN_ERROR = 2,
AUDIO_PATTERN_NOTIFY_POSITIVE = 3,
AUDIO_PATTERN_NOTIFY_NEUTRAL = 4,
AUDIO_PATTERN_NOTIFY_NEGATIVE = 5,
AUDIO_PATTERN_NOTIFY_CHARGE = 6
};
int trigger_audio_alarm(uint8_t old_mode, uint8_t old_state, uint8_t new_mode, uint8_t new_state)
{
/* Trigger alarm if going into any error state */
if (((new_state == SYSTEM_STATE_GROUND_ERROR) && (old_state != SYSTEM_STATE_GROUND_ERROR)) ||
((new_state == SYSTEM_STATE_MISSION_ABORT) && (old_state != SYSTEM_STATE_MISSION_ABORT))) {
ioctl(buzzer, TONE_SET_ALARM, 0);
ioctl(buzzer, TONE_SET_ALARM, AUDIO_PATTERN_ERROR);
}
/* Trigger neutral on arming / disarming */
if (((new_state == SYSTEM_STATE_GROUND_READY) && (old_state != SYSTEM_STATE_GROUND_READY))) {
ioctl(buzzer, TONE_SET_ALARM, 0);
ioctl(buzzer, TONE_SET_ALARM, AUDIO_PATTERN_NOTIFY_NEUTRAL);
}
/* Trigger Tetris on being bored */
return 0;
}
void tune_confirm(void)
{
ioctl(buzzer, TONE_SET_ALARM, 3);
}
void tune_error(void)
{
ioctl(buzzer, TONE_SET_ALARM, 4);
}
void do_rc_calibration(int status_pub, struct vehicle_status_s *status)
{
if (current_status.offboard_control_signal_lost) {
mavlink_log_critical(mavlink_fd, "TRIM CAL: ABORT. No RC signal.");
return;
}
int sub_man = orb_subscribe(ORB_ID(manual_control_setpoint));
struct manual_control_setpoint_s sp;
orb_copy(ORB_ID(manual_control_setpoint), sub_man, &sp);
/* set parameters */
float p = sp.roll;
param_set(param_find("TRIM_ROLL"), &p);
p = sp.pitch;
param_set(param_find("TRIM_PITCH"), &p);
p = sp.yaw;
param_set(param_find("TRIM_YAW"), &p);
/* store to permanent storage */
/* auto-save to EEPROM */
int save_ret = param_save_default();
if (save_ret != 0) {
mavlink_log_critical(mavlink_fd, "TRIM CAL: WARN: auto-save of params failed");
}
mavlink_log_info(mavlink_fd, "trim calibration done");
}
void do_mag_calibration(int status_pub, struct vehicle_status_s *status)
{
/* set to mag calibration mode */
status->flag_preflight_mag_calibration = true;
state_machine_publish(status_pub, status, mavlink_fd);
int sub_mag = orb_subscribe(ORB_ID(sensor_mag));
struct mag_report mag;
/* 45 seconds */
uint64_t calibration_interval = 45 * 1000 * 1000;
/* maximum 2000 values */
const unsigned int calibration_maxcount = 500;
unsigned int calibration_counter = 0;
/* limit update rate to get equally spaced measurements over time (in ms) */
orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount);
// XXX old cal
// * FLT_MIN is not the most negative float number,
// * but the smallest number by magnitude float can
// * represent. Use -FLT_MAX to initialize the most
// * negative number
// float mag_max[3] = {-FLT_MAX, -FLT_MAX, -FLT_MAX};
// float mag_min[3] = {FLT_MAX, FLT_MAX, FLT_MAX};
int fd = open(MAG_DEVICE_PATH, O_RDONLY);
/* erase old calibration */
struct mag_scale mscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null)) {
warn("WARNING: failed to set scale / offsets for mag");
mavlink_log_info(mavlink_fd, "failed to set scale / offsets for mag");
}
/* calibrate range */
if (OK != ioctl(fd, MAGIOCCALIBRATE, fd)) {
warnx("failed to calibrate scale");
}
close(fd);
/* calibrate offsets */
// uint64_t calibration_start = hrt_absolute_time();
uint64_t axis_deadline = hrt_absolute_time();
uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval;
const char axislabels[3] = { 'X', 'Y', 'Z'};
int axis_index = -1;
float *x = (float *)malloc(sizeof(float) * calibration_maxcount);
float *y = (float *)malloc(sizeof(float) * calibration_maxcount);
float *z = (float *)malloc(sizeof(float) * calibration_maxcount);
if (x == NULL || y == NULL || z == NULL) {
warnx("mag cal failed: out of memory");
mavlink_log_info(mavlink_fd, "mag cal failed: out of memory");
warnx("x:%p y:%p z:%p\n", x, y, z);
return;
}
tune_confirm();
sleep(2);
tune_confirm();
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter < calibration_maxcount) {
/* wait blocking for new data */
struct pollfd fds[1] = { { .fd = sub_mag, .events = POLLIN } };
/* user guidance */
if (hrt_absolute_time() >= axis_deadline &&
axis_index < 3) {
axis_index++;
char buf[50];
sprintf(buf, "Please rotate around %c", axislabels[axis_index]);
mavlink_log_info(mavlink_fd, buf);
tune_confirm();
axis_deadline += calibration_interval / 3;
}
if (!(axis_index < 3)) {
break;
}
// int axis_left = (int64_t)axis_deadline - (int64_t)hrt_absolute_time();
// if ((axis_left / 1000) == 0 && axis_left > 0) {
// char buf[50];
// sprintf(buf, "[cmd] %d seconds left for axis %c", axis_left, axislabels[axis_index]);
// mavlink_log_info(mavlink_fd, buf);
// }
int poll_ret = poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(sensor_mag), sub_mag, &mag);
x[calibration_counter] = mag.x;
y[calibration_counter] = mag.y;
z[calibration_counter] = mag.z;
/* get min/max values */
// if (mag.x < mag_min[0]) {
// mag_min[0] = mag.x;
// }
// else if (mag.x > mag_max[0]) {
// mag_max[0] = mag.x;
// }
// if (raw.magnetometer_ga[1] < mag_min[1]) {
// mag_min[1] = raw.magnetometer_ga[1];
// }
// else if (raw.magnetometer_ga[1] > mag_max[1]) {
// mag_max[1] = raw.magnetometer_ga[1];
// }
// if (raw.magnetometer_ga[2] < mag_min[2]) {
// mag_min[2] = raw.magnetometer_ga[2];
// }
// else if (raw.magnetometer_ga[2] > mag_max[2]) {
// mag_max[2] = raw.magnetometer_ga[2];
// }
calibration_counter++;
} else if (poll_ret == 0) {
/* any poll failure for 1s is a reason to abort */
mavlink_log_info(mavlink_fd, "mag cal canceled (timed out)");
break;
}
}
float sphere_x;
float sphere_y;
float sphere_z;
float sphere_radius;
sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius);
free(x);
free(y);
free(z);
if (isfinite(sphere_x) && isfinite(sphere_y) && isfinite(sphere_z)) {
fd = open(MAG_DEVICE_PATH, 0);
struct mag_scale mscale;
if (OK != ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale))
warn("WARNING: failed to get scale / offsets for mag");
mscale.x_offset = sphere_x;
mscale.y_offset = sphere_y;
mscale.z_offset = sphere_z;
if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale))
warn("WARNING: failed to set scale / offsets for mag");
close(fd);
/* announce and set new offset */
if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset))) {
warnx("Setting X mag offset failed!\n");
}
if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset))) {
warnx("Setting Y mag offset failed!\n");
}
if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset))) {
warnx("Setting Z mag offset failed!\n");
}
if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale))) {
warnx("Setting X mag scale failed!\n");
}
if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale))) {
warnx("Setting Y mag scale failed!\n");
}
if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale))) {
warnx("Setting Z mag scale failed!\n");
}
/* auto-save to EEPROM */
int save_ret = param_save_default();
if (save_ret != 0) {
warn("WARNING: auto-save of params to storage failed");
mavlink_log_info(mavlink_fd, "FAILED storing calibration");
}
warnx("\tscale: %.6f %.6f %.6f\n \toffset: %.6f %.6f %.6f\nradius: %.6f GA\n",
(double)mscale.x_scale, (double)mscale.y_scale, (double)mscale.z_scale,
(double)mscale.x_offset, (double)mscale.y_offset, (double)mscale.z_offset, (double)sphere_radius);
char buf[52];
sprintf(buf, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset,
(double)mscale.y_offset, (double)mscale.z_offset);
mavlink_log_info(mavlink_fd, buf);
sprintf(buf, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale,
(double)mscale.y_scale, (double)mscale.z_scale);
mavlink_log_info(mavlink_fd, buf);
mavlink_log_info(mavlink_fd, "mag calibration done");
tune_confirm();
sleep(2);
tune_confirm();
sleep(2);
/* third beep by cal end routine */
} else {
mavlink_log_info(mavlink_fd, "mag calibration FAILED (NaN in sphere fit)");
}
/* disable calibration mode */
status->flag_preflight_mag_calibration = false;
state_machine_publish(status_pub, status, mavlink_fd);
close(sub_mag);
}
void do_gyro_calibration(int status_pub, struct vehicle_status_s *status)
{
/* set to gyro calibration mode */
status->flag_preflight_gyro_calibration = true;
state_machine_publish(status_pub, status, mavlink_fd);
const int calibration_count = 5000;
int sub_sensor_combined = orb_subscribe(ORB_ID(sensor_combined));
struct sensor_combined_s raw;
int calibration_counter = 0;
float gyro_offset[3] = {0.0f, 0.0f, 0.0f};
/* set offsets to zero */
int fd = open(GYRO_DEVICE_PATH, 0);
struct gyro_scale gscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale_null))
warn("WARNING: failed to set scale / offsets for gyro");
close(fd);
while (calibration_counter < calibration_count) {
/* wait blocking for new data */
struct pollfd fds[1] = { { .fd = sub_sensor_combined, .events = POLLIN } };
int poll_ret = poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(sensor_combined), sub_sensor_combined, &raw);
gyro_offset[0] += raw.gyro_rad_s[0];
gyro_offset[1] += raw.gyro_rad_s[1];
gyro_offset[2] += raw.gyro_rad_s[2];
calibration_counter++;
} else if (poll_ret == 0) {
/* any poll failure for 1s is a reason to abort */
mavlink_log_info(mavlink_fd, "gyro calibration aborted, retry");
return;
}
}
gyro_offset[0] = gyro_offset[0] / calibration_count;
gyro_offset[1] = gyro_offset[1] / calibration_count;
gyro_offset[2] = gyro_offset[2] / calibration_count;
/* exit gyro calibration mode */
status->flag_preflight_gyro_calibration = false;
state_machine_publish(status_pub, status, mavlink_fd);
if (isfinite(gyro_offset[0]) && isfinite(gyro_offset[1]) && isfinite(gyro_offset[2])) {
if (param_set(param_find("SENS_GYRO_XOFF"), &(gyro_offset[0]))
|| param_set(param_find("SENS_GYRO_YOFF"), &(gyro_offset[1]))
|| param_set(param_find("SENS_GYRO_ZOFF"), &(gyro_offset[2]))) {
mavlink_log_critical(mavlink_fd, "Setting gyro offsets failed!");
}
/* set offsets to actual value */
fd = open(GYRO_DEVICE_PATH, 0);
struct gyro_scale gscale = {
gyro_offset[0],
1.0f,
gyro_offset[1],
1.0f,
gyro_offset[2],
1.0f,
};
if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale))
warn("WARNING: failed to set scale / offsets for gyro");
close(fd);
/* auto-save to EEPROM */
int save_ret = param_save_default();
if (save_ret != 0) {
warn("WARNING: auto-save of params to storage failed");
}
// char buf[50];
// sprintf(buf, "cal: x:%8.4f y:%8.4f z:%8.4f", (double)gyro_offset[0], (double)gyro_offset[1], (double)gyro_offset[2]);
// mavlink_log_info(mavlink_fd, buf);
mavlink_log_info(mavlink_fd, "gyro calibration done");
tune_confirm();
sleep(2);
tune_confirm();
sleep(2);
/* third beep by cal end routine */
} else {
mavlink_log_info(mavlink_fd, "gyro calibration FAILED (NaN)");
}
close(sub_sensor_combined);
}
void do_airspeed_calibration(int status_pub, struct vehicle_status_s *status)
{
/* announce change */
mavlink_log_info(mavlink_fd, "keep it still");
/* set to accel calibration mode */
status->flag_preflight_airspeed_calibration = true;
state_machine_publish(status_pub, status, mavlink_fd);
const int calibration_count = 2500;
int sub_differential_pressure = orb_subscribe(ORB_ID(differential_pressure));
struct differential_pressure_s differential_pressure;
int calibration_counter = 0;
float airspeed_offset = 0.0f;
while (calibration_counter < calibration_count) {
/* wait blocking for new data */
struct pollfd fds[1] = { { .fd = sub_differential_pressure, .events = POLLIN } };
int poll_ret = poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(differential_pressure), sub_differential_pressure, &differential_pressure);
airspeed_offset += differential_pressure.voltage;
calibration_counter++;
} else if (poll_ret == 0) {
/* any poll failure for 1s is a reason to abort */
mavlink_log_info(mavlink_fd, "airspeed calibration aborted");
return;
}
}
airspeed_offset = airspeed_offset / calibration_count;
if (isfinite(airspeed_offset)) {
if (param_set(param_find("SENS_VAIR_OFF"), &(airspeed_offset))) {
mavlink_log_critical(mavlink_fd, "Setting offs failed!");
}
/* auto-save to EEPROM */
int save_ret = param_save_default();
if (save_ret != 0) {
warn("WARNING: auto-save of params to storage failed");
}
//char buf[50];
//sprintf(buf, "[cmd] accel cal: x:%8.4f y:%8.4f z:%8.4f\n", (double)accel_offset[0], (double)accel_offset[1], (double)accel_offset[2]);
//mavlink_log_info(mavlink_fd, buf);
mavlink_log_info(mavlink_fd, "airspeed calibration done");
tune_confirm();
sleep(2);
tune_confirm();
sleep(2);
/* third beep by cal end routine */
} else {
mavlink_log_info(mavlink_fd, "airspeed calibration FAILED (NaN)");
}
/* exit airspeed calibration mode */
status->flag_preflight_airspeed_calibration = false;
state_machine_publish(status_pub, status, mavlink_fd);
close(sub_differential_pressure);
}
void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_status, struct vehicle_command_s *cmd)
{
/* result of the command */
uint8_t result = VEHICLE_CMD_RESULT_UNSUPPORTED;
/* announce command handling */
tune_confirm();
/* supported command handling start */
/* request to set different system mode */
switch (cmd->command) {
case VEHICLE_CMD_DO_SET_MODE: {
if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, (uint8_t)cmd->param1)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
}
break;
case VEHICLE_CMD_COMPONENT_ARM_DISARM: {
/* request to arm */
if ((int)cmd->param1 == 1) {
if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
/* request to disarm */
} else if ((int)cmd->param1 == 0) {
if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
}
}
break;
/* request for an autopilot reboot */
case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: {
if ((int)cmd->param1 == 1) {
if (OK == do_state_update(status_pub, current_vehicle_status, mavlink_fd, SYSTEM_STATE_REBOOT)) {
/* SPECIAL CASE: SYSTEM WILL NEVER RETURN HERE */
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
/* system may return here */
result = VEHICLE_CMD_RESULT_DENIED;
}
}
}
break;
// /* request to land */
// case VEHICLE_CMD_NAV_LAND:
// {
// //TODO: add check if landing possible
// //TODO: add landing maneuver
//
// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_ARMED)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// } }
// break;
//
// /* request to takeoff */
// case VEHICLE_CMD_NAV_TAKEOFF:
// {
// //TODO: add check if takeoff possible
// //TODO: add takeoff maneuver
//
// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_AUTO)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// }
// }
// break;
//
/* preflight calibration */
case VEHICLE_CMD_PREFLIGHT_CALIBRATION: {
bool handled = false;
/* gyro calibration */
if ((int)(cmd->param1) == 1) {
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "starting gyro cal");
tune_confirm();
do_gyro_calibration(status_pub, ¤t_status);
mavlink_log_info(mavlink_fd, "finished gyro cal");
tune_confirm();
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
mavlink_log_critical(mavlink_fd, "REJECTING gyro cal");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* magnetometer calibration */
if ((int)(cmd->param2) == 1) {
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "starting mag cal");
tune_confirm();
do_mag_calibration(status_pub, ¤t_status);
mavlink_log_info(mavlink_fd, "finished mag cal");
tune_confirm();
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
mavlink_log_critical(mavlink_fd, "REJECTING mag cal");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* zero-altitude pressure calibration */
if ((int)(cmd->param3) == 1) {
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "zero altitude cal. not implemented");
tune_confirm();
} else {
mavlink_log_critical(mavlink_fd, "REJECTING altitude calibration");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* trim calibration */
if ((int)(cmd->param4) == 1) {
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "starting trim cal");
tune_confirm();
do_rc_calibration(status_pub, ¤t_status);
mavlink_log_info(mavlink_fd, "finished trim cal");
tune_confirm();
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
mavlink_log_critical(mavlink_fd, "REJECTING trim cal");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* accel calibration */
if ((int)(cmd->param5) == 1) {
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "CMD starting accel cal");
tune_confirm();
do_accel_calibration(status_pub, ¤t_status, mavlink_fd);
tune_confirm();
mavlink_log_info(mavlink_fd, "CMD finished accel cal");
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
mavlink_log_critical(mavlink_fd, "REJECTING accel cal");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* airspeed calibration */
if ((int)(cmd->param6) == 1) { //xxx: this is not defined by the mavlink protocol
/* transition to calibration state */
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT);
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) {
mavlink_log_info(mavlink_fd, "CMD starting airspeed cal");
tune_confirm();
do_airspeed_calibration(status_pub, ¤t_status);
tune_confirm();
mavlink_log_info(mavlink_fd, "CMD finished airspeed cal");
do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
mavlink_log_critical(mavlink_fd, "REJECTING airspeed cal");
result = VEHICLE_CMD_RESULT_DENIED;
}
handled = true;
}
/* none found */
if (!handled) {
//warnx("refusing unsupported calibration request\n");
mavlink_log_critical(mavlink_fd, "CMD refusing unsup. calib. request");
result = VEHICLE_CMD_RESULT_UNSUPPORTED;
}
}
break;
case VEHICLE_CMD_PREFLIGHT_STORAGE: {
if (current_status.flag_system_armed &&
((current_status.system_type == VEHICLE_TYPE_QUADROTOR) ||
(current_status.system_type == VEHICLE_TYPE_HEXAROTOR) ||
(current_status.system_type == VEHICLE_TYPE_OCTOROTOR))) {
/* do not perform expensive memory tasks on multirotors in flight */
// XXX this is over-safe, as soon as cmd is in low prio thread this can be allowed
mavlink_log_info(mavlink_fd, "REJECTING save cmd while multicopter armed");
} else {
// XXX move this to LOW PRIO THREAD of commander app
/* Read all parameters from EEPROM to RAM */
if (((int)(cmd->param1)) == 0) {
/* read all parameters from EEPROM to RAM */
int read_ret = param_load_default();
if (read_ret == OK) {
//warnx("[mavlink pm] Loaded EEPROM params in RAM\n");
mavlink_log_info(mavlink_fd, "OK loading params from");
mavlink_log_info(mavlink_fd, param_get_default_file());
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else if (read_ret == 1) {
mavlink_log_info(mavlink_fd, "OK no changes in");
mavlink_log_info(mavlink_fd, param_get_default_file());
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
if (read_ret < -1) {
mavlink_log_info(mavlink_fd, "ERR loading params from");
mavlink_log_info(mavlink_fd, param_get_default_file());
} else {
mavlink_log_info(mavlink_fd, "ERR no param file named");
mavlink_log_info(mavlink_fd, param_get_default_file());
}
result = VEHICLE_CMD_RESULT_FAILED;
}
} else if (((int)(cmd->param1)) == 1) {
/* write all parameters from RAM to EEPROM */
int write_ret = param_save_default();
if (write_ret == OK) {
mavlink_log_info(mavlink_fd, "OK saved param file");
mavlink_log_info(mavlink_fd, param_get_default_file());
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
if (write_ret < -1) {
mavlink_log_info(mavlink_fd, "ERR params file does not exit:");
mavlink_log_info(mavlink_fd, param_get_default_file());
} else {
mavlink_log_info(mavlink_fd, "ERR writing params to");
mavlink_log_info(mavlink_fd, param_get_default_file());
}
result = VEHICLE_CMD_RESULT_FAILED;
}
} else {
mavlink_log_info(mavlink_fd, "[pm] refusing unsupp. STOR request");
result = VEHICLE_CMD_RESULT_UNSUPPORTED;
}
}
}
break;
default: {
mavlink_log_critical(mavlink_fd, "[cmd] refusing unsupported command");
result = VEHICLE_CMD_RESULT_UNSUPPORTED;
/* announce command rejection */
ioctl(buzzer, TONE_SET_ALARM, 4);
}
break;
}
/* supported command handling stop */
if (result == VEHICLE_CMD_RESULT_FAILED ||
result == VEHICLE_CMD_RESULT_DENIED ||
result == VEHICLE_CMD_RESULT_UNSUPPORTED) {
ioctl(buzzer, TONE_SET_ALARM, 5);
} else if (result == VEHICLE_CMD_RESULT_ACCEPTED) {
tune_confirm();
}
/* send any requested ACKs */
if (cmd->confirmation > 0) {
/* send acknowledge command */
// XXX TODO
}
}
static void *orb_receive_loop(void *arg) //handles status information coming from subsystems (present, enabled, health), these values do not indicate the quality (variance) of the signal
{
/* Set thread name */
prctl(PR_SET_NAME, "commander orb rcv", getpid());
/* Subscribe to command topic */
int subsys_sub = orb_subscribe(ORB_ID(subsystem_info));
struct subsystem_info_s info;
struct vehicle_status_s *vstatus = (struct vehicle_status_s *)arg;
while (!thread_should_exit) {
struct pollfd fds[1] = { { .fd = subsys_sub, .events = POLLIN } };
if (poll(fds, 1, 5000) == 0) {
/* timeout, but this is no problem, silently ignore */
} else {
/* got command */
orb_copy(ORB_ID(subsystem_info), subsys_sub, &info);
warnx("Subsys changed: %d\n", (int)info.subsystem_type);
/* mark / unmark as present */
if (info.present) {
vstatus->onboard_control_sensors_present |= info.subsystem_type;
} else {
vstatus->onboard_control_sensors_present &= ~info.subsystem_type;
}
/* mark / unmark as enabled */
if (info.enabled) {
vstatus->onboard_control_sensors_enabled |= info.subsystem_type;
} else {
vstatus->onboard_control_sensors_enabled &= ~info.subsystem_type;
}
/* mark / unmark as ok */
if (info.ok) {
vstatus->onboard_control_sensors_health |= info.subsystem_type;
} else {
vstatus->onboard_control_sensors_health &= ~info.subsystem_type;
}
}
}
close(subsys_sub);
return NULL;
}
/*
* Provides a coarse estimate of remaining battery power.
*
* The estimate is very basic and based on decharging voltage curves.
*
* @return the estimated remaining capacity in 0..1
*/
float battery_remaining_estimate_voltage(float voltage);
PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.2f);
PARAM_DEFINE_FLOAT(BAT_V_FULL, 4.05f);
PARAM_DEFINE_FLOAT(BAT_N_CELLS, 3);
float battery_remaining_estimate_voltage(float voltage)
{
float ret = 0;
static param_t bat_volt_empty;
static param_t bat_volt_full;
static param_t bat_n_cells;
static bool initialized = false;
static unsigned int counter = 0;
static float ncells = 3;
// XXX change cells to int (and param to INT32)
if (!initialized) {
bat_volt_empty = param_find("BAT_V_EMPTY");
bat_volt_full = param_find("BAT_V_FULL");
bat_n_cells = param_find("BAT_N_CELLS");
initialized = true;
}
static float chemistry_voltage_empty = 3.2f;
static float chemistry_voltage_full = 4.05f;
if (counter % 100 == 0) {
param_get(bat_volt_empty, &chemistry_voltage_empty);
param_get(bat_volt_full, &chemistry_voltage_full);
param_get(bat_n_cells, &ncells);
}
counter++;
ret = (voltage - ncells * chemistry_voltage_empty) / (ncells * (chemistry_voltage_full - chemistry_voltage_empty));
/* limit to sane values */
ret = (ret < 0) ? 0 : ret;
ret = (ret > 1) ? 1 : ret;
return ret;
}
static void
usage(const char *reason)
{
if (reason)
fprintf(stderr, "%s\n", reason);
fprintf(stderr, "usage: daemon {start|stop|status} [-p <additional params>]\n\n");
exit(1);
}
/**
* The daemon app only briefly exists to start
* the background job. The stack size assigned in the
* Makefile does only apply to this management task.
*
* The actual stack size should be set in the call
* to task_create().
*/
int commander_main(int argc, char *argv[])
{
if (argc < 1)
usage("missing command");
if (!strcmp(argv[1], "start")) {
if (thread_running) {
warnx("commander already running\n");
/* this is not an error */
exit(0);
}
thread_should_exit = false;
daemon_task = task_spawn("commander",
SCHED_DEFAULT,
SCHED_PRIORITY_MAX - 40,
3000,
commander_thread_main,
(argv) ? (const char **)&argv[2] : (const char **)NULL);
exit(0);
}
if (!strcmp(argv[1], "stop")) {
thread_should_exit = true;
exit(0);
}
if (!strcmp(argv[1], "status")) {
if (thread_running) {
warnx("\tcommander is running\n");
} else {
warnx("\tcommander not started\n");
}
exit(0);
}
usage("unrecognized command");
exit(1);
}
int commander_thread_main(int argc, char *argv[])
{
/* not yet initialized */
commander_initialized = false;
bool home_position_set = false;
/* set parameters */
failsafe_lowlevel_timeout_ms = 0;
param_get(param_find("SYS_FAILSAVE_LL"), &failsafe_lowlevel_timeout_ms);
param_t _param_sys_type = param_find("MAV_TYPE");
param_t _param_system_id = param_find("MAV_SYS_ID");
param_t _param_component_id = param_find("MAV_COMP_ID");
/* welcome user */
warnx("I am in command now!\n");
/* pthreads for command and subsystem info handling */
// pthread_t command_handling_thread;
pthread_t subsystem_info_thread;
/* initialize */
if (led_init() != 0) {
warnx("ERROR: Failed to initialize leds\n");
}
if (buzzer_init() != 0) {
warnx("ERROR: Failed to initialize buzzer\n");
}
mavlink_fd = open(MAVLINK_LOG_DEVICE, 0);
if (mavlink_fd < 0) {
warnx("ERROR: Failed to open MAVLink log stream, start mavlink app first.\n");
}
/* make sure we are in preflight state */
memset(¤t_status, 0, sizeof(current_status));
current_status.state_machine = SYSTEM_STATE_PREFLIGHT;
current_status.flag_system_armed = false;
/* neither manual nor offboard control commands have been received */
current_status.offboard_control_signal_found_once = false;
current_status.rc_signal_found_once = false;
/* mark all signals lost as long as they haven't been found */
current_status.rc_signal_lost = true;
current_status.offboard_control_signal_lost = true;
/* allow manual override initially */
current_status.flag_external_manual_override_ok = true;
/* flag position info as bad, do not allow auto mode */
current_status.flag_vector_flight_mode_ok = false;
/* set battery warning flag */
current_status.battery_warning = VEHICLE_BATTERY_WARNING_NONE;
/* advertise to ORB */
stat_pub = orb_advertise(ORB_ID(vehicle_status), ¤t_status);
/* publish current state machine */
state_machine_publish(stat_pub, ¤t_status, mavlink_fd);
/* home position */
orb_advert_t home_pub = -1;
struct home_position_s home;
memset(&home, 0, sizeof(home));
if (stat_pub < 0) {
warnx("ERROR: orb_advertise for topic vehicle_status failed (uorb app running?).\n");
warnx("exiting.");
exit(ERROR);
}
mavlink_log_info(mavlink_fd, "system is running");
/* create pthreads */
pthread_attr_t subsystem_info_attr;
pthread_attr_init(&subsystem_info_attr);
pthread_attr_setstacksize(&subsystem_info_attr, 2048);
pthread_create(&subsystem_info_thread, &subsystem_info_attr, orb_receive_loop, ¤t_status);
/* Start monitoring loop */
uint16_t counter = 0;
uint8_t flight_env;
/* Initialize to 0.0V */
float battery_voltage = 0.0f;
bool battery_voltage_valid = false;
bool low_battery_voltage_actions_done = false;
bool critical_battery_voltage_actions_done = false;
uint8_t low_voltage_counter = 0;
uint16_t critical_voltage_counter = 0;
int16_t mode_switch_rc_value;
float bat_remain = 1.0f;
uint16_t stick_off_counter = 0;
uint16_t stick_on_counter = 0;
/* Subscribe to manual control data */
int sp_man_sub = orb_subscribe(ORB_ID(manual_control_setpoint));
struct manual_control_setpoint_s sp_man;
memset(&sp_man, 0, sizeof(sp_man));
/* Subscribe to offboard control data */
int sp_offboard_sub = orb_subscribe(ORB_ID(offboard_control_setpoint));
struct offboard_control_setpoint_s sp_offboard;
memset(&sp_offboard, 0, sizeof(sp_offboard));
int global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position));
struct vehicle_global_position_s global_position;
memset(&global_position, 0, sizeof(global_position));
uint64_t last_global_position_time = 0;
int local_position_sub = orb_subscribe(ORB_ID(vehicle_local_position));
struct vehicle_local_position_s local_position;
memset(&local_position, 0, sizeof(local_position));
uint64_t last_local_position_time = 0;
/*
* The home position is set based on GPS only, to prevent a dependency between
* position estimator and commander. RAW GPS is more than good enough for a
* non-flying vehicle.
*/
int gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position));
struct vehicle_gps_position_s gps_position;
memset(&gps_position, 0, sizeof(gps_position));
int sensor_sub = orb_subscribe(ORB_ID(sensor_combined));
struct sensor_combined_s sensors;
memset(&sensors, 0, sizeof(sensors));
int differential_pressure_sub = orb_subscribe(ORB_ID(differential_pressure));
struct differential_pressure_s differential_pressure;
memset(&differential_pressure, 0, sizeof(differential_pressure));
uint64_t last_differential_pressure_time = 0;
/* Subscribe to command topic */
int cmd_sub = orb_subscribe(ORB_ID(vehicle_command));
struct vehicle_command_s cmd;
memset(&cmd, 0, sizeof(cmd));
/* Subscribe to parameters changed topic */
int param_changed_sub = orb_subscribe(ORB_ID(parameter_update));
struct parameter_update_s param_changed;
memset(¶m_changed, 0, sizeof(param_changed));
/* subscribe to battery topic */
int battery_sub = orb_subscribe(ORB_ID(battery_status));
struct battery_status_s battery;
memset(&battery, 0, sizeof(battery));
battery.voltage_v = 0.0f;
// uint8_t vehicle_state_previous = current_status.state_machine;
float voltage_previous = 0.0f;
uint64_t last_idle_time = 0;
/* now initialized */
commander_initialized = true;
thread_running = true;
uint64_t start_time = hrt_absolute_time();
uint64_t failsave_ll_start_time = 0;
bool state_changed = true;
bool param_init_forced = true;
while (!thread_should_exit) {
/* Get current values */
bool new_data;
orb_check(sp_man_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(manual_control_setpoint), sp_man_sub, &sp_man);
}
orb_check(sp_offboard_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(offboard_control_setpoint), sp_offboard_sub, &sp_offboard);
}
orb_check(sensor_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors);
}
orb_check(differential_pressure_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(differential_pressure), differential_pressure_sub, &differential_pressure);
last_differential_pressure_time = differential_pressure.timestamp;
}
orb_check(cmd_sub, &new_data);
if (new_data) {
/* got command */
orb_copy(ORB_ID(vehicle_command), cmd_sub, &cmd);
/* handle it */
handle_command(stat_pub, ¤t_status, &cmd);
}
/* update parameters */
orb_check(param_changed_sub, &new_data);
if (new_data || param_init_forced) {
param_init_forced = false;
/* parameters changed */
orb_copy(ORB_ID(parameter_update), param_changed_sub, ¶m_changed);
/* update parameters */
if (!current_status.flag_system_armed) {
if (param_get(_param_sys_type, &(current_status.system_type)) != OK) {
warnx("failed setting new system type");
}
/* disable manual override for all systems that rely on electronic stabilization */
if (current_status.system_type == VEHICLE_TYPE_QUADROTOR ||
current_status.system_type == VEHICLE_TYPE_HEXAROTOR ||
current_status.system_type == VEHICLE_TYPE_OCTOROTOR) {
current_status.flag_external_manual_override_ok = false;
} else {
current_status.flag_external_manual_override_ok = true;
}
/* check and update system / component ID */
param_get(_param_system_id, &(current_status.system_id));
param_get(_param_component_id, &(current_status.component_id));
}
}
/* update global position estimate */
orb_check(global_position_sub, &new_data);
if (new_data) {
/* position changed */
orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_position);
last_global_position_time = global_position.timestamp;
}
/* update local position estimate */
orb_check(local_position_sub, &new_data);
if (new_data) {
/* position changed */
orb_copy(ORB_ID(vehicle_local_position), local_position_sub, &local_position);
last_local_position_time = local_position.timestamp;
}
/* update battery status */
orb_check(battery_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(battery_status), battery_sub, &battery);
battery_voltage = battery.voltage_v;
battery_voltage_valid = true;
/*
* Only update battery voltage estimate if system has
* been running for two and a half seconds.
*/
if (hrt_absolute_time() - start_time > 2500000) {
bat_remain = battery_remaining_estimate_voltage(battery_voltage);
}
}
/* Slow but important 8 Hz checks */
if (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 8) == 0) {
/* toggle activity (blue) led at 1 Hz in standby, 10 Hz in armed mode */
if ((current_status.state_machine == SYSTEM_STATE_GROUND_READY ||
current_status.state_machine == SYSTEM_STATE_AUTO ||
current_status.state_machine == SYSTEM_STATE_MANUAL)) {
/* armed */
led_toggle(LED_BLUE);
} else if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) {
/* not armed */
led_toggle(LED_BLUE);
}
/* toggle error led at 5 Hz in HIL mode */
if (current_status.flag_hil_enabled) {
/* hil enabled */
led_toggle(LED_AMBER);
} else if (bat_remain < 0.3f && (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT)) {
/* toggle error (red) at 5 Hz on low battery or error */
led_toggle(LED_AMBER);
} else {
// /* Constant error indication in standby mode without GPS */
// if (!current_status.gps_valid) {
// led_on(LED_AMBER);
// } else {
// led_off(LED_AMBER);
// }
}
if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) {
/* compute system load */
uint64_t interval_runtime = system_load.tasks[0].total_runtime - last_idle_time;
if (last_idle_time > 0)
current_status.load = 1000 - (interval_runtime / 1000); //system load is time spent in non-idle
last_idle_time = system_load.tasks[0].total_runtime;
}
}
// // XXX Export patterns and threshold to parameters
/* Trigger audio event for low battery */
if (bat_remain < 0.1f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 4) == 0)) {
/* For less than 10%, start be really annoying at 5 Hz */
ioctl(buzzer, TONE_SET_ALARM, 0);
ioctl(buzzer, TONE_SET_ALARM, 3);
} else if (bat_remain < 0.1f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 4) == 2)) {
ioctl(buzzer, TONE_SET_ALARM, 0);
} else if (bat_remain < 0.2f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 2) == 0)) {
/* For less than 20%, start be slightly annoying at 1 Hz */
ioctl(buzzer, TONE_SET_ALARM, 0);
tune_confirm();
} else if (bat_remain < 0.2f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 2) == 2)) {
ioctl(buzzer, TONE_SET_ALARM, 0);
}
/* Check battery voltage */
/* write to sys_status */
if (battery_voltage_valid) {
current_status.voltage_battery = battery_voltage;
} else {
current_status.voltage_battery = 0.0f;
}
/* if battery voltage is getting lower, warn using buzzer, etc. */
if (battery_voltage_valid && (bat_remain < 0.15f /* XXX MAGIC NUMBER */) && (false == low_battery_voltage_actions_done)) { //TODO: add filter, or call emergency after n measurements < VOLTAGE_BATTERY_MINIMAL_MILLIVOLTS
if (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT) {
low_battery_voltage_actions_done = true;
mavlink_log_critical(mavlink_fd, "[cmd] WARNING! LOW BATTERY!");
current_status.battery_warning = VEHICLE_BATTERY_WARNING_WARNING;
}
low_voltage_counter++;
}
/* Critical, this is rather an emergency, kill signal to sdlog and change state machine */
else if (battery_voltage_valid && (bat_remain < 0.1f /* XXX MAGIC NUMBER */) && (false == critical_battery_voltage_actions_done && true == low_battery_voltage_actions_done)) {
if (critical_voltage_counter > CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT) {
critical_battery_voltage_actions_done = true;
mavlink_log_critical(mavlink_fd, "[cmd] EMERGENCY! CRITICAL BATTERY!");
current_status.battery_warning = VEHICLE_BATTERY_WARNING_ALERT;
state_machine_emergency(stat_pub, ¤t_status, mavlink_fd);
}
critical_voltage_counter++;
} else {
low_voltage_counter = 0;
critical_voltage_counter = 0;
}
/* End battery voltage check */
/*
* Check for valid position information.
*
* If the system has a valid position source from an onboard
* position estimator, it is safe to operate it autonomously.
* The flag_vector_flight_mode_ok flag indicates that a minimum
* set of position measurements is available.
*/
/* store current state to reason later about a state change */
bool vector_flight_mode_ok = current_status.flag_vector_flight_mode_ok;
bool global_pos_valid = current_status.flag_global_position_valid;
bool local_pos_valid = current_status.flag_local_position_valid;
bool airspeed_valid = current_status.flag_airspeed_valid;
/* check for global or local position updates, set a timeout of 2s */
if (hrt_absolute_time() - last_global_position_time < 2000000) {
current_status.flag_global_position_valid = true;
// XXX check for controller status and home position as well
} else {
current_status.flag_global_position_valid = false;
}
if (hrt_absolute_time() - last_local_position_time < 2000000) {
current_status.flag_local_position_valid = true;
// XXX check for controller status and home position as well
} else {
current_status.flag_local_position_valid = false;
}
/* Check for valid airspeed/differential pressure measurements */
if (hrt_absolute_time() - last_differential_pressure_time < 2000000) {
current_status.flag_airspeed_valid = true;
} else {
current_status.flag_airspeed_valid = false;
}
/*
* Consolidate global position and local position valid flags
* for vector flight mode.
*/
if (current_status.flag_local_position_valid ||
current_status.flag_global_position_valid) {
current_status.flag_vector_flight_mode_ok = true;
} else {
current_status.flag_vector_flight_mode_ok = false;
}
/* consolidate state change, flag as changed if required */
if (vector_flight_mode_ok != current_status.flag_vector_flight_mode_ok ||
global_pos_valid != current_status.flag_global_position_valid ||
local_pos_valid != current_status.flag_local_position_valid ||
airspeed_valid != current_status.flag_airspeed_valid) {
state_changed = true;
}
/*
* Mark the position of the first position lock as return to launch (RTL)
* position. The MAV will return here on command or emergency.
*
* Conditions:
*
* 1) The system aquired position lock just now
* 2) The system has not aquired position lock before
* 3) The system is not armed (on the ground)
*/
if (!current_status.flag_valid_launch_position &&
!vector_flight_mode_ok && current_status.flag_vector_flight_mode_ok &&
!current_status.flag_system_armed) {
/* first time a valid position, store it and emit it */
// XXX implement storage and publication of RTL position
current_status.flag_valid_launch_position = true;
current_status.flag_auto_flight_mode_ok = true;
state_changed = true;
}
if (orb_check(ORB_ID(vehicle_gps_position), &new_data)) {
orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps_position);
/* check for first, long-term and valid GPS lock -> set home position */
float hdop_m = gps_position.eph_m;
float vdop_m = gps_position.epv_m;
/* check if gps fix is ok */
// XXX magic number
float hdop_threshold_m = 4.0f;
float vdop_threshold_m = 8.0f;
/*
* If horizontal dilution of precision (hdop / eph)
* and vertical diluation of precision (vdop / epv)
* are below a certain threshold (e.g. 4 m), AND
* home position is not yet set AND the last GPS
* GPS measurement is not older than two seconds AND
* the system is currently not armed, set home
* position to the current position.
*/
if (gps_position.fix_type == GPS_FIX_TYPE_3D
&& (hdop_m < hdop_threshold_m)
&& (vdop_m < vdop_threshold_m)
&& !home_position_set
&& (hrt_absolute_time() - gps_position.timestamp_position < 2000000)
&& !current_status.flag_system_armed) {
warnx("setting home position");
/* copy position data to uORB home message, store it locally as well */
home.lat = gps_position.lat;
home.lon = gps_position.lon;
home.alt = gps_position.alt;
home.eph_m = gps_position.eph_m;
home.epv_m = gps_position.epv_m;
home.s_variance_m_s = gps_position.s_variance_m_s;
home.p_variance_m = gps_position.p_variance_m;
/* announce new home position */
if (home_pub > 0) {
orb_publish(ORB_ID(home_position), home_pub, &home);
} else {
home_pub = orb_advertise(ORB_ID(home_position), &home);
}
/* mark home position as set */
home_position_set = true;
tune_confirm();
}
}
/* ignore RC signals if in offboard control mode */
if (!current_status.offboard_control_signal_found_once && sp_man.timestamp != 0) {
/* Start RC state check */
if ((hrt_absolute_time() - sp_man.timestamp) < 100000) {
// /*
// * Check if manual control modes have to be switched
// */
// if (!isfinite(sp_man.manual_mode_switch)) {
// warnx("man mode sw not finite\n");
// /* this switch is not properly mapped, set default */
// if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) ||
// (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) ||
// (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) {
// /* assuming a rotary wing, fall back to SAS */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS;
// current_status.flag_control_attitude_enabled = true;
// current_status.flag_control_rates_enabled = true;
// } else {
// /* assuming a fixed wing, fall back to direct pass-through */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT;
// current_status.flag_control_attitude_enabled = false;
// current_status.flag_control_rates_enabled = false;
// }
// } else if (sp_man.manual_mode_switch < -STICK_ON_OFF_LIMIT) {
// /* bottom stick position, set direct mode for vehicles supporting it */
// if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) ||
// (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) ||
// (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) {
// /* assuming a rotary wing, fall back to SAS */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS;
// current_status.flag_control_attitude_enabled = true;
// current_status.flag_control_rates_enabled = true;
// } else {
// /* assuming a fixed wing, set to direct pass-through as requested */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT;
// current_status.flag_control_attitude_enabled = false;
// current_status.flag_control_rates_enabled = false;
// }
// } else if (sp_man.manual_mode_switch > STICK_ON_OFF_LIMIT) {
// /* top stick position, set SAS for all vehicle types */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS;
// current_status.flag_control_attitude_enabled = true;
// current_status.flag_control_rates_enabled = true;
// } else {
// /* center stick position, set rate control */
// current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_RATES;
// current_status.flag_control_attitude_enabled = false;
// current_status.flag_control_rates_enabled = true;
// }
// warnx("man ctrl mode: %d\n", (int)current_status.manual_control_mode);
/*
* Check if manual stability control modes have to be switched
*/
if (!isfinite(sp_man.manual_sas_switch)) {
/* this switch is not properly mapped, set default */
current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS;
} else if (sp_man.manual_sas_switch < -STICK_ON_OFF_LIMIT) {
/* bottom stick position, set altitude hold */
current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ALTITUDE;
} else if (sp_man.manual_sas_switch > STICK_ON_OFF_LIMIT) {
/* top stick position */
current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_SIMPLE;
} else {
/* center stick position, set default */
current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS;
}
/*
* Check if left stick is in lower left position --> switch to standby state.
* Do this only for multirotors, not for fixed wing aircraft.
*/
if (((current_status.system_type == VEHICLE_TYPE_QUADROTOR) ||
(current_status.system_type == VEHICLE_TYPE_HEXAROTOR) ||
(current_status.system_type == VEHICLE_TYPE_OCTOROTOR)
) &&
((sp_man.yaw < -STICK_ON_OFF_LIMIT)) &&
(sp_man.throttle < STICK_THRUST_RANGE * 0.2f)) {
if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) {
update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd);
stick_on_counter = 0;
} else {
stick_off_counter++;
stick_on_counter = 0;
}
}
/* check if left stick is in lower right position --> arm */
if (sp_man.yaw > STICK_ON_OFF_LIMIT && sp_man.throttle < STICK_THRUST_RANGE * 0.2f) {
if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) {
update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd);
stick_on_counter = 0;
} else {
stick_on_counter++;
stick_off_counter = 0;
}
}
/* check manual override switch - switch to manual or auto mode */
if (sp_man.manual_override_switch > STICK_ON_OFF_LIMIT) {
/* enable manual override */
update_state_machine_mode_manual(stat_pub, ¤t_status, mavlink_fd);
} else if (sp_man.manual_override_switch < -STICK_ON_OFF_LIMIT) {
// /* check auto mode switch for correct mode */
// if (sp_man.auto_mode_switch > STICK_ON_OFF_LIMIT) {
// /* enable guided mode */
// update_state_machine_mode_guided(stat_pub, ¤t_status, mavlink_fd);
// } else if (sp_man.auto_mode_switch < -STICK_ON_OFF_LIMIT) {
// XXX hardcode to auto for now
update_state_machine_mode_auto(stat_pub, ¤t_status, mavlink_fd);
// }
} else {
/* center stick position, set SAS for all vehicle types */
update_state_machine_mode_stabilized(stat_pub, ¤t_status, mavlink_fd);
}
/* handle the case where RC signal was regained */
if (!current_status.rc_signal_found_once) {
current_status.rc_signal_found_once = true;
mavlink_log_critical(mavlink_fd, "DETECTED RC SIGNAL FIRST TIME.");
} else {
if (current_status.rc_signal_lost) mavlink_log_critical(mavlink_fd, "[cmd] RECOVERY - RC SIGNAL GAINED!");
}
current_status.rc_signal_cutting_off = false;
current_status.rc_signal_lost = false;
current_status.rc_signal_lost_interval = 0;
} else {
static uint64_t last_print_time = 0;
/* print error message for first RC glitch and then every 5 s / 5000 ms) */
if (!current_status.rc_signal_cutting_off || ((hrt_absolute_time() - last_print_time) > 5000000)) {
/* only complain if the offboard control is NOT active */
current_status.rc_signal_cutting_off = true;
mavlink_log_critical(mavlink_fd, "CRITICAL - NO REMOTE SIGNAL!");
last_print_time = hrt_absolute_time();
}
/* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */
current_status.rc_signal_lost_interval = hrt_absolute_time() - sp_man.timestamp;
/* if the RC signal is gone for a full second, consider it lost */
if (current_status.rc_signal_lost_interval > 1000000) {
current_status.rc_signal_lost = true;
current_status.failsave_lowlevel = true;
state_changed = true;
}
// if (hrt_absolute_time() - current_status.failsave_ll_start_time > failsafe_lowlevel_timeout_ms*1000) {
// publish_armed_status(¤t_status);
// }
}
}
/* End mode switch */
/* END RC state check */
/* State machine update for offboard control */
if (!current_status.rc_signal_found_once && sp_offboard.timestamp != 0) {
if ((hrt_absolute_time() - sp_offboard.timestamp) < 5000000) {
/* decide about attitude control flag, enable in att/pos/vel */
bool attitude_ctrl_enabled = (sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE ||
sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_VELOCITY ||
sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_POSITION);
/* decide about rate control flag, enable it always XXX (for now) */
bool rates_ctrl_enabled = true;
/* set up control mode */
if (current_status.flag_control_attitude_enabled != attitude_ctrl_enabled) {
current_status.flag_control_attitude_enabled = attitude_ctrl_enabled;
state_changed = true;
}
if (current_status.flag_control_rates_enabled != rates_ctrl_enabled) {
current_status.flag_control_rates_enabled = rates_ctrl_enabled;
state_changed = true;
}
/* handle the case where offboard control signal was regained */
if (!current_status.offboard_control_signal_found_once) {
current_status.offboard_control_signal_found_once = true;
/* enable offboard control, disable manual input */
current_status.flag_control_manual_enabled = false;
current_status.flag_control_offboard_enabled = true;
state_changed = true;
tune_confirm();
mavlink_log_critical(mavlink_fd, "DETECTED OFFBOARD SIGNAL FIRST");
} else {
if (current_status.offboard_control_signal_lost) {
mavlink_log_critical(mavlink_fd, "RECOVERY OFFBOARD CONTROL");
state_changed = true;
tune_confirm();
}
}
current_status.offboard_control_signal_weak = false;
current_status.offboard_control_signal_lost = false;
current_status.offboard_control_signal_lost_interval = 0;
/* arm / disarm on request */
if (sp_offboard.armed && !current_status.flag_system_armed) {
update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd);
/* switch to stabilized mode = takeoff */
update_state_machine_mode_stabilized(stat_pub, ¤t_status, mavlink_fd);
} else if (!sp_offboard.armed && current_status.flag_system_armed) {
update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd);
}
} else {
static uint64_t last_print_time = 0;
/* print error message for first RC glitch and then every 5 s / 5000 ms) */
if (!current_status.offboard_control_signal_weak || ((hrt_absolute_time() - last_print_time) > 5000000)) {
current_status.offboard_control_signal_weak = true;
mavlink_log_critical(mavlink_fd, "CRIT:NO OFFBOARD CONTROL!");
last_print_time = hrt_absolute_time();
}
/* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */
current_status.offboard_control_signal_lost_interval = hrt_absolute_time() - sp_offboard.timestamp;
/* if the signal is gone for 0.1 seconds, consider it lost */
if (current_status.offboard_control_signal_lost_interval > 100000) {
current_status.offboard_control_signal_lost = true;
current_status.failsave_lowlevel_start_time = hrt_absolute_time();
tune_confirm();
/* kill motors after timeout */
if (hrt_absolute_time() - current_status.failsave_lowlevel_start_time > failsafe_lowlevel_timeout_ms * 1000) {
current_status.failsave_lowlevel = true;
state_changed = true;
}
}
}
}
current_status.counter++;
current_status.timestamp = hrt_absolute_time();
/* If full run came back clean, transition to standby */
if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT &&
current_status.flag_preflight_gyro_calibration == false &&
current_status.flag_preflight_mag_calibration == false &&
current_status.flag_preflight_accel_calibration == false) {
/* All ok, no calibration going on, go to standby */
do_state_update(stat_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
}
/* publish at least with 1 Hz */
if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 || state_changed) {
publish_armed_status(¤t_status);
orb_publish(ORB_ID(vehicle_status), stat_pub, ¤t_status);
state_changed = false;
}
/* Store old modes to detect and act on state transitions */
voltage_previous = current_status.voltage_battery;
fflush(stdout);
counter++;
usleep(COMMANDER_MONITORING_INTERVAL);
}
/* wait for threads to complete */
// pthread_join(command_handling_thread, NULL);
pthread_join(subsystem_info_thread, NULL);
/* close fds */
led_deinit();
buzzer_deinit();
close(sp_man_sub);
close(sp_offboard_sub);
close(global_position_sub);
close(sensor_sub);
close(cmd_sub);
warnx("exiting..\n");
fflush(stdout);
thread_running = false;
return 0;
}
|