#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
choice
prompt "CPU Architecture"
default ARCH_ARM
config ARCH_8051
bool "8051"
select CUSTOM_STACK
---help---
Intel 8051 architectures and derivaties
config ARCH_ARM
bool "ARM"
select ARCH_HAVE_INTERRUPTSTACK
select ARCH_HAVE_VFORK
---help---
The ARM architectures
config ARCH_AVR
bool "AVR"
select ARCH_NOINTC
select ARCH_HAVE_INTERRUPTSTACK
---help---
Atmel 8-bit bit AVR and 32-bit AVR32 architectures
config ARCH_HC
bool "Freescale HC"
select ARCH_NOINTC
select ARCH_HAVE_INTERRUPTSTACK
---help---
Freescale HC architectures (M9S12)
config ARCH_MIPS
bool "MIPS"
select ARCH_HAVE_INTERRUPTSTACK
---help---
MIPS architectures (PIC32)
config ARCH_RGMP
bool "RGMP"
---help---
RTOS and GPOS on Multi-Processor (RGMP) architecture. See
http://rgmp.sourceforge.net/wiki/index.php/Main_Page.
config ARCH_SH
bool "Renesas"
select ARCH_NOINTC
select ARCH_HAVE_INTERRUPTSTACK
---help---
Renesas architectures (SH and M16C).
config ARCH_SIM
bool "Simulation"
---help---
Linux/Cywgin user-mode simulation.
config ARCH_X86
bool "x86"
---help---
Intel x86 architectures.
config ARCH_Z16
bool "ZNEO"
select ARCH_HAVE_HEAP2
---help---
ZiLOG ZNEO 16-bit architectures (z16f).
config ARCH_Z80
bool "z80"
select ARCH_HAVE_HEAP2
---help---
ZiLOG 8-bit architectures (z80, ez80, z8).
endchoice
config ARCH
string
default "8051" if ARCH_8051
default "arm" if ARCH_ARM
default "avr" if ARCH_AVR
default "hc" if ARCH_HC
default "mips" if ARCH_MIPS
default "rgmp" if ARCH_RGMP
default "sh" if ARCH_SH
default "sim" if ARCH_SIM
default "x86" if ARCH_X86
default "z16" if ARCH_Z16
default "z80" if ARCH_Z80
source arch/8051/Kconfig
source arch/arm/Kconfig
source arch/avr/Kconfig
source arch/hc/Kconfig
source arch/mips/Kconfig
source arch/rgmp/Kconfig
source arch/sh/Kconfig
source arch/sim/Kconfig
source arch/x86/Kconfig
source arch/z16/Kconfig
source arch/z80/Kconfig
menu "External Memory Configuration"
config ARCH_HAVE_EXTNAND
bool
config ARCH_HAVE_EXTNOR
bool
config ARCH_HAVE_EXTDRAM
bool
config ARCH_HAVE_EXTSRAM0
bool
config ARCH_HAVE_EXTSRAM1
bool
config ARCH_EXTNAND
bool "Configure external NAND"
default n
depends on ARCH_HAVE_EXTNAND
---help---
Configure external NAND memory and, if applicable, map then external
NAND into the memory map.
if ARCH_EXTNAND
config ARCH_EXTNANDSIZE
int "External NAND size"
default 0
---help---
Size of the external NAND in bytes.
endif
config ARCH_EXTNOR
bool "Configure external NOR memory"
default n
depends on ARCH_HAVE_EXTNOR
---help---
Configure external NOR memory and, if applicable, map then external
NOR into the memory map.
if ARCH_EXTNOR
config ARCH_EXTNORSIZE
int "External NOR size"
default 0
---help---
Size of the external NOR in bytes.
endif
config ARCH_EXTDRAM
bool "Configure external DRAM"
default n
depends on ARCH_HAVE_EXTDRAM
---help---
Configure external DRAM memory and, if applicable, map then external
DRAM into the memory map.
if ARCH_EXTDRAM
config ARCH_EXTDRAMSIZE
int "External SDRAM size"
default 0
---help---
Size of the external SDRAM in bytes.
choice
prompt "SDRAM Width Selection"
default ARCH_CHIP_STM32F103ZET6
depends on ARCH_CHIP_STM32
config ARCH_SDRAM_8BIT
bool "8-bit"
config ARCH_SDRAM_16BIT
bool "16-bit"
config ARCH_SDRAM_32BIT
bool "32-bit"
endchoice
config ARCH_EXTDRAMHEAP
bool "Add external SDRAM to the heap"
default y
---help---
Add the external SDRAM into the heap.
endif
config ARCH_EXTSRAM0
bool "Configure external SRAM (Bank 0)"
default n
depends on ARCH_HAVE_EXTSRAM0
---help---
Configure external SRAM Bank 0 memory and, if applicable, map then
external SRAM Bank 0 into the memory map.
if ARCH_EXTSRAM0
config ARCH_EXTSRAM0SIZE
int "External SRAM size"
default 0
---help---
Size of the external SRAM Bank 0 in bytes.
config ARCH_EXTSRAM0HEAP
bool "Add external SRAM (Bank 0) to the heap"
default y
---help---
Add external SRAM Bank 0 into the heap.
endif
config ARCH_EXTSRAM1
bool "Configure external SRAM (Bank 1)"
default n
depends on ARCH_HAVE_EXTSRAM1
---help---
Configure external SRAM Bank 1 memory and, if applicable, map then
external SRAM Bank 1 into the memory map.
if ARCH_EXTSRAM1
config ARCH_EXTSRAM1SIZE
int "External SRAM1 size"
default 0
---help---
Size of the external SRAM Bank 1 in bytes.
config ARCH_EXTSRAM1HEAP
bool "Add external SRAM (Bank 1) to the heap"
default y
---help---
Add external SRAM Bank 1 into the heap.
endif
endmenu
comment "Architecture Options"
config ARCH_NOINTC
bool
default n
config ARCH_VECNOTIRQ
bool
default n
config ARCH_DMA
bool
default n
config ARCH_IRQPRIO
bool
default n
config CUSTOM_STACK
bool
default n
config ADDRENV
bool
default n
config ARCH_HAVE_VFORK
bool
default n
config ARCH_STACKDUMP
bool "Dump stack on assertions"
default n
---help---
Enable to do stack dumps after assertions
config ENDIAN_BIG
bool "Big Endian Architecture"
default n
---help---
Select if architecture operates using big-endian byte ordering.
config ARCH_HAVE_RAMFUNCS
bool
default n
config ARCH_RAMFUNCS
bool "Copy functions to RAM on startup"
default n
depends on ARCH_HAVE_RAMFUNCS
---help---
Copy some functions to RAM at boot time. This is done in some
architectures to improve performance. In other cases, it is done
so that FLASH can be reconfigured while the MCU executes out of
SRAM.
config ARCH_HAVE_RAMVECTORS
bool
default n
config ARCH_RAMVECTORS
bool "Support RAM interrupt vectors"
default n
depends on ARCH_HAVE_RAMVECTORS
---help---
If ARCH_RAMVECTORS is defined, then the architecture will support
modifiable vectors in a RAM-based vector table.
comment "Board Settings"
config BOARD_LOOPSPERMSEC
int "Delay loops per millisecond"
default 5000
---help---
Simple delay loops are used by some logic, especially during boot-up,
driver initialization. These delay loops must be calibrated for each
board in order to assure accurate timing by the delay loops.
config ARCH_CALIBRATION
bool "Calibrate delay loop"
default n
---help---
Enables some built in instrumentation that causes a 100 second delay
during boot-up. This 100 second delay serves no purpose other than it
allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop
watch to measure the actual delay then adjust BOARD_LOOPSPERMSEC until
the actual delay is 100 seconds.
config DRAM_START
hex "DRAM start physical address"
help
The physical start address of installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
config DRAM_VSTART
hex "DRAM start virtual address"
depends on ARCH_HAVE_MMU
help
The virtual start address of installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
config DRAM_SIZE
int "DRAM size"
help
The size in bytes of the installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
config ARCH_HAVE_INTERRUPTSTACK
bool
config ARCH_INTERRUPTSTACK
int "Interrupt Stack Size"
depends on ARCH_HAVE_INTERRUPTSTACK
default 0
---help---
This architecture supports an interrupt stack. If defined, this symbol
will be the size of the interrupt stack in bytes. If not defined (or
defined to be zero), the user task stacks will be used during interrupt
handling.
comment "Boot options"
choice
prompt "Boot Mode"
default BOOT_RUNFROMFLASH
config BOOT_RUNFROMEXTSRAM
bool "Run from external SRAM"
---help---
Some configuration support booting and running from external SRAM.
config BOOT_RUNFROMFLASH
bool "Boot and run from flash"
---help---
Most configurations support XIP operation from FLASH but must copy
initialized .data sections to RAM. (This is the default).
config BOOT_RUNFROMISRAM
bool "Boot and run from internal SRAM"
---help---
Some configuration support booting and running from internal SRAM.
config BOOT_RUNFROMSDRAM
bool "Boot and run from external SDRAM"
---help---
Some configuration support booting and running from external SDRAM.
config BOOT_COPYTORAM
bool "Boot from FLASH but copy to ram"
---help---
Some configurations boot in FLASH but copy themselves entirely into
RAM for better performance.
endchoice
