|
|
/****************************************************************************
* arch/arm/src/kl/kl_gpio.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_KL_KINETIS_GPIO_H
#define __ARCH_ARM_SRC_KL_KINETIS_GPIO_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <nuttx/irq.h>
#include "kl_config.h"
#include "chip/kl_gpio.h"
#include "chip/kl_port.h"
/****************************************************************************
* Pre-processor Declarations
****************************************************************************/
/* Bit-encoded input to kl_pinconfig() *****************************************/
/* General form (32-bits, only 22 bits are unused in the encoding):
*
* oooo mmmv iiii ifd- ---- -ppp ---b bbbb
*/
/* Bits 25-31: 7 bits are used to encode the basic pin configuration:
*
* oooo mmm- ---- ---- ---- ---- ---- ----
* | `--- mmm: mode
* `------- oooo: options (may be combined)
*/
#define _PIN_MODE_SHIFT (25) /* Bits 25-27: Pin mode */
#define _PIN_MODE_MASK (7 << _PIN_MODE_SHIFT)
#define _PIN_OPTIONS_SHIFT (28) /* Bits 28-31: Pin mode options */
#define _PIN_OPTIONS_MASK (15 << _PIN_OPTIONS_SHIFT)
/* Port Modes */
#define PIN_MODE_ANALOG (0) /* 000 Pin Disabled (Analog) */
#define PIN_MODE_GPIO (1) /* 001 Alternative 1 (GPIO) */
#define PIN_MODE_ALT2 (2) /* 010 Alternative 2 */
#define PIN_MODE_ALT3 (3) /* 011 Alternative 3 */
#define PIN_MODE_ALT4 (4) /* 100 Alternative 4 */
#define PIN_MODE_ALT5 (5) /* 101 Alternative 5 */
#define PIN_MODE_ALT6 (6) /* 110 Alternative 6 */
#define PIN_MODE_ALT7 (7) /* 111 Alternative 7 */
#define _PIN_MODE_ANALOG (0 << _PIN_MODE_SHIFT) /* 000 Pin Disabled (Analog) */
#define _PIN_MODE_GPIO (1 << _PIN_MODE_SHIFT) /* 001 Alternative 1 (GPIO) */
#define _PIN_MODE_ALT2 (2 << _PIN_MODE_SHIFT) /* 010 Alternative 2 */
#define _PIN_MODE_ALT3 (3 << _PIN_MODE_SHIFT) /* 011 Alternative 3 */
#define _PIN_MODE_ALT4 (4 << _PIN_MODE_SHIFT) /* 100 Alternative 4 */
#define _PIN_MODE_ALT5 (5 << _PIN_MODE_SHIFT) /* 101 Alternative 5 */
#define _PIN_MODE_ALT6 (6 << _PIN_MODE_SHIFT) /* 110 Alternative 6 */
#define _PIN_MODE_ALT7 (7 << _PIN_MODE_SHIFT) /* 111 Alternative 7 */
/* Options for all digital modes (Alternatives 1-7). None of the digital
* options apply if the analog mode is selected.
*/
#define _PIN_IO_MASK (1 << _PIN_OPTIONS_SHIFT) /* xxx1 Digital input/output mask */
#define _PIN_INPUT (0 << _PIN_OPTIONS_SHIFT) /* xxx0 Digital input */
#define _PIN_OUTPUT (1 << _PIN_OPTIONS_SHIFT) /* xxx1 Digital output */
#define _PIN_INPUT_PULLMASK (7 << _PIN_OPTIONS_SHIFT) /* x111 Mask for pull-up or -down bits */
#define _PIN_INPUT_PULLDOWN (2 << _PIN_OPTIONS_SHIFT) /* x010 Input with internal pull-down resistor */
#define _PIN_INPUT_PULLUP (6 << _PIN_OPTIONS_SHIFT) /* x110 Input with internal pull-up resistor */
#define _PIN_OUTPUT_SLEW_MASK (3 << _PIN_OPTIONS_SHIFT) /* xx11 Mask to test for slow slew rate */
#define _PIN_OUTPUT_FAST (1 << _PIN_OPTIONS_SHIFT) /* xx01 Output with fast slew rate */
#define _PIN_OUTPUT_SLOW (3 << _PIN_OPTIONS_SHIFT) /* xx11 Output with slow slew rate */
#define _PIN_OUTPUT_OD_MASK (5 << _PIN_OPTIONS_SHIFT) /* x1x1 Mask to test for open drain */
#define _PIN_OUTPUT_OPENDRAIN (5 << _PIN_OPTIONS_SHIFT) /* x1x1 Output with open drain enabled */
#define _PIN_OUTPUT_DRIVE_MASK (9 << _PIN_OPTIONS_SHIFT) /* 1xx1 Mask to test for high drive strengh */
#define _PIN_OUTPUT_LOWDRIVE (1 << _PIN_OPTIONS_SHIFT) /* 0xx1 Output with low drive strength */
#define _PIN_OUTPUT_HIGHDRIVE (9 << _PIN_OPTIONS_SHIFT) /* 1xx1 Output with high drive strength */
/* End-user pin modes and configurations. Notes: (1) None of the digital options
* are available for the analog mode, (2) digital settings may be combined (OR'ed)
* provided that input-only and output-only options are not intermixed.
*/
#define PIN_ANALOG _PIN_MODE_ANALOG
#define GPIO_INPUT (_PIN_MODE_GPIO | _PIN_INPUT)
#define GPIO_PULLDOWN (_PIN_MODE_GPIO | _PIN_INPUT_PULLDOWN)
#define GPIO_PULLUP (_PIN_MODE_GPIO | _PIN_INPUT_PULLUP)
#define GPIO_OUTPUT (_PIN_MODE_GPIO | _PIN_OUTPUT)
#define GPIO_FAST (_PIN_MODE_GPIO | _PIN_OUTPUT_FAST)
#define GPIO_SLOW (_PIN_MODE_GPIO | _PIN_OUTPUT_SLOW)
#define GPIO_OPENDRAIN (_PIN_MODE_GPIO | _PIN_OUTPUT_LOWDRIVE)
#define GPIO_LOWDRIVE (_PIN_MODE_GPIO | _PIN_OUTPUT_OPENDRAIN)
#define GPIO_HIGHDRIVE (_PIN_MODE_GPIO | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT2 _PIN_MODE_ALT2
#define PIN_ALT2_INPUT (_PIN_MODE_ALT2 | _PIN_INPUT)
#define PIN_ALT2_PULLDOWN (_PIN_MODE_ALT2 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT2_PULLUP (_PIN_MODE_ALT2 | _PIN_INPUT_PULLUP)
#define PIN_ALT2_OUTPUT (_PIN_MODE_ALT2 | _PIN_OUTPUT)
#define PIN_ALT2_FAST (_PIN_MODE_ALT2 | _PIN_OUTPUT_FAST)
#define PIN_ALT2_SLOW (_PIN_MODE_ALT2 | _PIN_OUTPUT_SLOW)
#define PIN_ALT2_OPENDRAIN (_PIN_MODE_ALT2 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT2_LOWDRIVE (_PIN_MODE_ALT2 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT2_HIGHDRIVE (_PIN_MODE_ALT2 | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT3 _PIN_MODE_ALT3
#define PIN_ALT3_INPUT (_PIN_MODE_ALT3 | _PIN_INPUT)
#define PIN_ALT3_PULLDOWN (_PIN_MODE_ALT3 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT3_PULLUP (_PIN_MODE_ALT3 | _PIN_INPUT_PULLUP)
#define PIN_ALT3_OUTPUT (_PIN_MODE_ALT3 | _PIN_OUTPUT)
#define PIN_ALT3_FAST (_PIN_MODE_ALT3 | _PIN_OUTPUT_FAST)
#define PIN_ALT3_SLOW (_PIN_MODE_ALT3 | _PIN_OUTPUT_SLOW)
#define PIN_ALT3_OPENDRAIN (_PIN_MODE_ALT3 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT3_LOWDRIVE (_PIN_MODE_ALT3 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT3_HIGHDRIVE (_PIN_MODE_ALT3 | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT4 _PIN_MODE_ALT4
#define PIN_ALT4_INPUT (_PIN_MODE_ALT4 | _PIN_INPUT)
#define PIN_ALT4_PULLDOWN (_PIN_MODE_ALT4 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT4_PULLUP (_PIN_MODE_ALT4 | _PIN_INPUT_PULLUP)
#define PIN_ALT4_OUTPUT (_PIN_MODE_ALT4 | _PIN_OUTPUT)
#define PIN_ALT4_FAST (_PIN_MODE_ALT4 | _PIN_OUTPUT_FAST)
#define PIN_ALT4_SLOW (_PIN_MODE_ALT4 | _PIN_OUTPUT_SLOW)
#define PIN_ALT4_OPENDRAIN (_PIN_MODE_ALT4 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT4_LOWDRIVE (_PIN_MODE_ALT4 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT4_HIGHDRIVE (_PIN_MODE_ALT4 | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT5 _PIN_MODE_ALT5
#define PIN_ALT5_INPUT (_PIN_MODE_ALT5 | _PIN_INPUT)
#define PIN_ALT5_PULLDOWN (_PIN_MODE_ALT5 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT5_PULLUP (_PIN_MODE_ALT5 | _PIN_INPUT_PULLUP)
#define PIN_ALT5_OUTPUT (_PIN_MODE_ALT5 | _PIN_OUTPUT)
#define PIN_ALT5_FAST (_PIN_MODE_ALT5 | _PIN_OUTPUT_FAST)
#define PIN_ALT5_SLOW (_PIN_MODE_ALT5 | _PIN_OUTPUT_SLOW)
#define PIN_ALT5_OPENDRAIN (_PIN_MODE_ALT5 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT5_LOWDRIVE (_PIN_MODE_ALT5 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT5_HIGHDRIVE (_PIN_MODE_ALT5 | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT6 _PIN_MODE_ALT6
#define PIN_ALT6_INPUT (_PIN_MODE_ALT6 | _PIN_INPUT)
#define PIN_ALT6_PULLDOWN (_PIN_MODE_ALT6 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT6_PULLUP (_PIN_MODE_ALT6 | _PIN_INPUT_PULLUP)
#define PIN_ALT6_OUTPUT (_PIN_MODE_ALT6 | _PIN_OUTPUT)
#define PIN_ALT6_FAST (_PIN_MODE_ALT6 | _PIN_OUTPUT_FAST)
#define PIN_ALT6_SLOW (_PIN_MODE_ALT6 | _PIN_OUTPUT_SLOW)
#define PIN_ALT6_OPENDRAIN (_PIN_MODE_ALT6 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT6_LOWDRIVE (_PIN_MODE_ALT6 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT6_HIGHDRIVE (_PIN_MODE_ALT6 | _PIN_OUTPUT_HIGHDRIVE)
#define PIN_ALT7 _PIN_MODE_ALT7
#define PIN_ALT7_INPUT (_PIN_MODE_ALT7 | _PIN_INPUT)
#define PIN_ALT7_PULLDOWN (_PIN_MODE_ALT7 | _PIN_INPUT_PULLDOWN)
#define PIN_ALT7_PULLUP (_PIN_MODE_ALT7 | _PIN_INPUT_PULLUP)
#define PIN_ALT7_OUTPUT (_PIN_MODE_ALT7 | _PIN_OUTPUT)
#define PIN_ALT7_FAST (_PIN_MODE_ALT7 | _PIN_OUTPUT_FAST)
#define PIN_ALT7_SLOW (_PIN_MODE_ALT7 | _PIN_OUTPUT_SLOW)
#define PIN_ALT7_OPENDRAIN (_PIN_MODE_ALT7 | _PIN_OUTPUT_LOWDRIVE)
#define PIN_ALT7_LOWDRIVE (_PIN_MODE_ALT7 | _PIN_OUTPUT_OPENDRAIN)
#define PIN_ALT7_HIGHDRIVE (_PIN_MODE_ALT7 | _PIN_OUTPUT_HIGHDRIVE)
/* The initial value for GPIO (Alternative 1 outputs):
*
* ---- ---v ---- ---- ---- ---- ---- ----
*
* Passive Filter and digital filter enable are valid in all digital pin
* muxing modes.
*/
#define GPIO_OUTPUT_ONE (1 << 24) /* Bit 24: 1:Initial output value=1 */
#define GPIO_OUTPUT_ZER0 (0) /* Bit 24: 0:Initial output value=0 */
/* Five bits are used to incode DMA/interrupt options:
*
* ---- ---- iiii i--- ---- ---- ---- ----
*
* The pin interrupt configuration is valid in all digital pin muxing modes
* (restricted to inputs).
*/
#define _PIN_INT_SHIFT (20)
#define _PIN_INT_MASK (31 << _PIN_INT_SHIFT)
#define _PIN_INTDMA_MASK (3 << _PIN_INT_SHIFT)
#define _PIN_INTDMA_NONE (0 << _PIN_INT_SHIFT)
#define _PIN_DMA (1 << _PIN_INT_SHIFT)
#define _PIN_INTERRUPT (2 << _PIN_INT_SHIFT)
#define PIN_DMA_RISING (5 << _PIN_INT_SHIFT) /* 00101 DMA Request on rising edge */
#define PIN_DMA_FALLING (9 << _PIN_INT_SHIFT) /* 01001 DMA Request on falling edge */
#define PIN_DMA_BOTH (13 << _PIN_INT_SHIFT) /* 01101 DMA Request on either edge */
#define PIN_INT_ZERO (2 << _PIN_INT_SHIFT) /* 00010 Interrupt when logic zero */
#define PIN_INT_RISING (6 << _PIN_INT_SHIFT) /* 00110 Interrupt on rising edge */
#define PIN_INT_FALLING (10 << _PIN_INT_SHIFT) /* 01010 Interrupt on falling edge */
#define PIN_INT_BOTH (14 << _PIN_INT_SHIFT) /* 01110 Interrupt on either edge */
#define PIN_INT_ONE (18 << _PIN_INT_SHIFT) /* 10010 Interrupt when logic one */
/* Two bits is used to enable the filter options:
*
* ---- ---- ---- -fd- ---- ---- ---- ----
*
* Passive Filter and digital filter enable are valid in all digital pin
* muxing modes.
*/
#define PIN_PASV_FILTER (1 << 18) /* Bit 18: Enable passive filter */
#define PIN_DIG_FILTER (1 << 17) /* Bit 17: Enable digital filter */
/* Three bits are used to define the port number:
*
* ---- ---- ---- ---- ---- -ppp ---- ----
*/
#define _PIN_PORT_SHIFT (8) /* Bits 8-10: port number */
#define _PIN_PORT_MASK (7 << _PIN_PORT_SHIFT)
#define PIN_PORTA (KL_PORTA << _PIN_PORT_SHIFT)
#define PIN_PORTB (KL_PORTB << _PIN_PORT_SHIFT)
#define PIN_PORTC (KL_PORTC << _PIN_PORT_SHIFT)
#define PIN_PORTD (KL_PORTD << _PIN_PORT_SHIFT)
#define PIN_PORTE (KL_PORTE << _PIN_PORT_SHIFT)
/* Five bits are used to define the pin number:
*
* ---- ---- ---- ---- ---- ---- ---b bbbb
*/
#define _PIN_SHIFT (0) /* Bits 0-4: port number */
#define _PIN_MASK (31 << _PIN_SHIFT)
#define PIN(n) ((n) << _PIN_SHIFT)
#define PIN0 (0 << _PIN_SHIFT)
#define PIN1 (1 << _PIN_SHIFT)
#define PIN2 (2 << _PIN_SHIFT)
#define PIN3 (3 << _PIN_SHIFT)
#define PIN4 (4 << _PIN_SHIFT)
#define PIN5 (5 << _PIN_SHIFT)
#define PIN6 (6 << _PIN_SHIFT)
#define PIN7 (7 << _PIN_SHIFT)
#define PIN8 (8 << _PIN_SHIFT)
#define PIN9 (9 << _PIN_SHIFT)
#define PIN10 (10 << _PIN_SHIFT)
#define PIN11 (11 << _PIN_SHIFT)
#define PIN12 (12 << _PIN_SHIFT)
#define PIN13 (13 << _PIN_SHIFT)
#define PIN14 (14 << _PIN_SHIFT)
#define PIN15 (15 << _PIN_SHIFT)
#define PIN16 (16 << _PIN_SHIFT)
#define PIN17 (17 << _PIN_SHIFT)
#define PIN18 (18 << _PIN_SHIFT)
#define PIN19 (19 << _PIN_SHIFT)
#define PIN20 (20 << _PIN_SHIFT)
#define PIN21 (21 << _PIN_SHIFT)
#define PIN22 (22 << _PIN_SHIFT)
#define PIN23 (23 << _PIN_SHIFT)
#define PIN24 (24 << _PIN_SHIFT)
#define PIN25 (25 << _PIN_SHIFT)
#define PIN26 (26 << _PIN_SHIFT)
#define PIN27 (27 << _PIN_SHIFT)
#define PIN28 (28 << _PIN_SHIFT)
#define PIN29 (29 << _PIN_SHIFT)
#define PIN30 (30 << _PIN_SHIFT)
#define PIN31 (31 << _PIN_SHIFT)
/****************************************************************************
* Public Types
****************************************************************************/
typedef uint32_t gpio_cfgset_t;
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: kl_configgpio
*
* Description:
* Configure a PIN based on bit-encoded description of the pin. NOTE that
* DMA/interrupts are disabled at the initial PIN configuratin.
*
****************************************************************************/
int kl_configgpio(uint32_t cfgset);
/****************************************************************************
* Name: kl_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
****************************************************************************/
void kl_gpiowrite(uint32_t pinset, bool value);
/****************************************************************************
* Name: kl_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
****************************************************************************/
bool kl_gpioread(uint32_t pinset);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_KL_KINETIS_GPIO_H */
|
