/****************************************************************************
* arch/arm/src/lm3s/lm3s_syscontrol.c
* arch/arm/src/chip/lm3s_syscontrol.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/init.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
/****************************************************************************
* Private Definitions
****************************************************************************/
#define RCC_OSCMASK (SYSCON_RCC_IOSCDIS|SYSCON_RCC_MOSCDIS)
#define RCC_XTALMASK (SYSCON_RCC_XTAL_MASK|SYSCON_RCC_OSCSRC_MASK|SYSCON_RCC_PWRDN)
#define RCC2_XTALMASK (SYSCON_RCC2_USERCC2|SYSCON_RCC2_OSCSRC2_MASK|SYSCON_RCC2_PWRDN2)
#define RCC_DIVMASK (SYSCON_RCC_SYSDIV_MASK|SYSCON_RCC_USESYSDIV|SYSCON_RCC_IOSCDIS|SYSCON_RCC_MOSCDIS)
#define RCC2_DIVMASK (SYSCON_RCC2_SYSDIV2_MASK)
#define FAST_OSCDELAY (512*1024)
#define SLOW_OSCDELAY (4*1024)
#define PLLLOCK_DELAY (32*1024)
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: lm3s_delay
*
* Description:
* Wait for the newly selected oscillator(s) to settle. This is tricky because
* the time that we wait can be significant and is determined by the previous
* clock setting, not the one that we are configuring.
*
****************************************************************************/
static inline void lm3s_delay(uint32 delay)
{
__asm__ __volatile__("1:\n"
"\tsubs %0, #1\n"
"\tbne 1b\n"
: "=r"(delay) : "r"(delay));
}
/****************************************************************************
* Name: lm3s_oscdelay
*
* Description:
* Wait for the newly selected oscillator(s) to settle. This is tricky because
* the time that we wait can be significant and is determined by the previous
* clock setting, not the one that we are configuring.
*
****************************************************************************/
static inline void lm3s_oscdelay(uint32 rcc, uint32 rcc2)
{
/* Wait for the oscillator to stabilize. A smaller delay is used if the
* current clock rate is very slow.
*/
uint32 delay = FAST_OSCDELAY;
/* Are we currently using RCC2? */
if ((rcc2 & SYSCON_RCC2_USERCC2) != 0)
{
uint32 rcc2src = rcc2 & SYSCON_RCC2_OSCSRC2_MASK;
if ((rcc2src == SYSCON_RCC2_OSCSRC2_30KHZ) ||
(rcc2src == SYSCON_RCC2_OSCSRC2_32KHZ))
{
delay = SLOW_OSCDELAY;
}
}
/* No.. using srce in RCC */
else
{
uint32 rccsrc = rcc & SYSCON_RCC_OSCSRC_MASK;
if (rccsrc == SYSCON_RCC_OSCSRC_30KHZ)
{
delay = SLOW_OSCDELAY;
}
}
/* Then delay that number of loops */
lm3s_delay(delay);
}
/****************************************************************************
* Name: lm3s_plllock
*
* Description:
* The new RCC values have been selected... wait for the PLL to lock on
*
****************************************************************************/
static inline void lm3s_plllock(void)
{
uint32 delay;
/* Loop until the lock is achieved or until a timeout occurs */
for (delay = PLLLOCK_DELAY; delay > 0; delay--)
{
/* Check if the PLL is locked on */
if (getreg32(LM3S_SYSCON_RIS) & SYSCON_IMC_PLLLIM)
{
/* Yes.. return now */
return;
}
}
/* If we get here, then PLL lock was not achieved */
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lm3s_clockconfig
*
* Description:
* Called to check to new clock based on desired rcc and rcc2 settings.
* This is use to set up the initial clocking but can be used later to
* support slow clocked, low power consumption modes.
*
****************************************************************************/
void lm3s_clockconfig(uint32 newrcc, uint32 newrcc2)
{
uint32 rcc;
uint32 rcc2;
/* Get the current values of the RCC and RCC2 registers */
rcc = getreg32(LM3S_SYSCON_RCC);
rcc2 = getreg32(LM3S_SYSCON_RCC2);
/* Temporarily bypass the PLL and system clock dividers */
rcc |= SYSCON_RCC_BYPASS;
rcc &= ~(SYSCON_RCC_USESYSDIV);
putreg32(rcc, LM3S_SYSCON_RCC);
rcc2 |= SYSCON_RCC2_BYPASS2;
putreg32(rcc2, LM3S_SYSCON_RCC2);
/* We are probably using the main oscillator. The main oscillator is disabled on
* reset and so probably must be enabled here. The internal oscillator is enabled
* on rest and if that is selected, most likely nothing needs to be done.
*/
if (((rcc & SYSCON_RCC_MOSCDIS) && !(newrcc & SYSCON_RCC_MOSCDIS)) ||
((rcc & SYSCON_RCC_IOSCDIS) && !(newrcc & SYSCON_RCC_IOSCDIS)))
{
/* Enable any selected osciallators */
rcc &= (~RCC_OSCMASK|(newrcc & RCC_OSCMASK));
putreg32(rcc, LM3S_SYSCON_RCC);
/* Wait for the newly selected oscillator(s) to settle. This is tricky because
* the time that we wait can be significant and is determined by the previous
* clock setting, not the one that we are configuring.
*/
lm3s_oscdelay(rcc, rcc2);
}
/* Set the new crystal value, oscillator source and PLL configuration */
rcc &= ~RCC_XTALMASK;
rcc |= newrcc & RCC_XTALMASK;
rcc2 &= ~RCC2_XTALMASK;
rcc2 |= newrcc2 & RCC2_XTALMASK;
/* Clear the PLL lock interrupt */
putreg32(SYSCON_MISC_PLLLMIS, LM3S_SYSCON_MISC);
/* Write the new RCC/RCC2 values. Order depends upon whether RCC2 or RCC
* is currently enabled.
*/
if (rcc2 & SYSCON_RCC2_USERCC2)
{
putreg32(rcc2, LM3S_SYSCON_RCC2);
putreg32(rcc, LM3S_SYSCON_RCC);
}
else
{
putreg32(rcc, LM3S_SYSCON_RCC);
putreg32(rcc2, LM3S_SYSCON_RCC2);
}
/* Wait for the new crystal value and oscillator source to take effect */
lm3s_delay(16);
/* Set the requested system deivider and disable the non-selected osciallators */
rcc &= ~RCC_DIVMASK;
rcc |= newrcc & RCC_DIVMASK;
rcc2 &= ~RCC2_DIVMASK;
rcc2 |= newrcc2 & RCC2_DIVMASK;
/* Will the PLL output be used to clock the system? */
if ((newrcc & SYSCON_RCC_BYPASS) == 0)
{
/* Yes, wail untill the PLL is locked */
lm3s_plllock();
/* Then enable the PLL */
rcc &= ~SYSCON_RCC_BYPASS;
rcc2 &= ~SYSCON_RCC2_BYPASS2;
}
/* Now we can set the final RCC/RCC2 values */
putreg32(rcc, LM3S_SYSCON_RCC);
putreg32(rcc2, LM3S_SYSCON_RCC2);
/* Wait for the system divider to be effective */
lm3s_delay(6);
}
/****************************************************************************
* Name: up_clockconfig
*
* Description:
* Called early in the bootsequence (before .data and .bss are available)
* in order to configure initial clocking.
*
****************************************************************************/
void up_clockconfig(void)
{
#ifdef CONFIG_LM3S_REVA2
/* Some early silicon returned an increase LDO voltage or 2.75V to work
* around a PLL bug
*/
putreg32(SYSCON_LPDOPCTL_2750MV, LM3S_SYSCON_LDOPCTL);
#endif
/* Set the clocking to run with the default settings provided in the board.h
* header file
*/
lm3s_clockconfig(LM3S_RCC_VALUE, LM3S_RCC2_VALUE);
}