/************************************************************************************
* arch/arm/src/lpc17xx/lpc17_adc.c
*
* Copyright (C) 2011 Li Zhuoyi. All rights reserved.
* Author: Li Zhuoyi <lzyy.cn@gmail.com>
* History: 0.1 2011-08-05 initial version
*
* This file is a part of NuttX:
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <errno.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/arch.h>
#include <nuttx/analog/adc.h>
#include "up_internal.h"
#include "up_arch.h"
#include "chip.h"
#include "chip/lpc17_syscon.h"
#include "lpc17_gpio.h"
#include "lpc17_adc.h"
#if defined(CONFIG_LPC17_ADC)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_ADC0_MASK
#define CONFIG_ADC0_MASK 0x01
#endif
#ifndef CONFIG_ADC0_SPS
#define CONFIG_ADC0_SPS 1000
#endif
#ifndef CONFIG_ADC0_AVERAGE
#define CONFIG_ADC0_AVERAGE 200
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct up_dev_s
{
uint8_t mask;
uint32_t sps;
int irq;
int32_t buf[8];
uint8_t count[8];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* ADC methods */
static void adc_reset(FAR struct adc_dev_s *dev);
static int adc_setup(FAR struct adc_dev_s *dev);
static void adc_shutdown(FAR struct adc_dev_s *dev);
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable);
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg);
static int adc_interrupt(int irq, void *context);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct adc_ops_s g_adcops =
{
.ao_reset = adc_reset,
.ao_setup = adc_setup,
.ao_shutdown = adc_shutdown,
.ao_rxint = adc_rxint,
.ao_ioctl = adc_ioctl,
};
static struct up_dev_s g_adcpriv =
{
.sps = CONFIG_ADC0_SPS,
.mask = CONFIG_ADC0_MASK,
.irq = LPC17_IRQ_ADC,
};
static struct adc_dev_s g_adcdev =
{
.ad_ops = &g_adcops,
.ad_priv = &g_adcpriv,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: adc_reset
*
* Description:
* Reset the ADC device. Called early to initialize the hardware. This
* is called, before adc_setup() and on error conditions.
*
****************************************************************************/
static void adc_reset(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
irqstate_t flags;
uint32_t clkdiv;
uint32_t regval;
flags = irqsave();
regval = getreg32(LPC17_SYSCON_PCONP);
regval |= SYSCON_PCONP_PCADC;
putreg32(regval, LPC17_SYSCON_PCONP);
putreg32(ADC_CR_PDN, LPC17_ADC_CR);
regval = getreg32(LPC17_SYSCON_PCLKSEL0);
regval &= ~SYSCON_PCLKSEL0_ADC_MASK;
regval |= (SYSCON_PCLKSEL_CCLK8 << SYSCON_PCLKSEL0_ADC_SHIFT);
putreg32(regval, LPC17_SYSCON_PCLKSEL0);
clkdiv = LPC17_CCLK / 8 / 65 / priv->sps;
clkdiv <<= 8;
clkdiv &= 0xff00;
putreg32(ADC_CR_PDN | ADC_CR_BURST | clkdiv | priv->mask, LPC17_ADC_CR);
if ((priv->mask & 0x01) != 0)
{
lpc17_configgpio(GPIO_AD0p0);
}
else if ((priv->mask & 0x02) != 0)
{
lpc17_configgpio(GPIO_AD0p1);
}
else if ((priv->mask & 0x04) != 0)
{
lpc17_configgpio(GPIO_AD0p2);
}
else if ((priv->mask & 0x08) != 0)
{
lpc17_configgpio(GPIO_AD0p3);
}
else if ((priv->mask & 0x10) != 0)
{
lpc17_configgpio(GPIO_AD0p4);
}
else if ((priv->mask & 0x20) != 0)
{
lpc17_configgpio(GPIO_AD0p5);
}
else if ((priv->mask & 0x40) != 0)
{
lpc17_configgpio(GPIO_AD0p6);
}
else if ((priv->mask & 0x80) != 0)
{
lpc17_configgpio(GPIO_AD0p7);
}
irqrestore(flags);
}
/****************************************************************************
* Name: adc_setup
*
* Description:
* Configure the ADC. This method is called the first time that the ADC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching ADC interrupts. Interrupts
* are all disabled upon return.
*
****************************************************************************/
static int adc_setup(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
int i;
int ret = irq_attach(priv->irq, adc_interrupt);
if (ret == OK)
{
for (i = 0; i < 8; i++)
{
priv->buf[i] = 0;
priv->count[i] = 0;
}
up_enable_irq(priv->irq);
}
return ret;
}
/****************************************************************************
* Name: adc_shutdown
*
* Description:
* Disable the ADC. This method is called when the ADC device is closed.
* This method reverses the operation the setup method.
*
****************************************************************************/
static void adc_shutdown(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
/* Disable ADC interrupts, both at the level of the ADC device and at the
* level of the NVIC.
*/
putreg32(0, LPC17_ADC_INTEN);
up_disable_irq(priv->irq);
/* Then detach the ADC interrupt handler. */
irq_detach(priv->irq);
}
/****************************************************************************
* Name: adc_rxint
*
* Description:
* Call to enable or disable RX interrupts
*
****************************************************************************/
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
if (enable)
{
#ifdef CONFIG_ADC_CHANLIST
/* Trigger interrupt at the end of conversion on the last A/D channel
* in the channel list.
*/
putreg32(ADC_INTEN_CHAN(g_adc_chanlist[CONFIG_ADC_NCHANNELS - 1]),
LPC17_ADC_INTEN);
#else
/* Trigger interrupt using the global DONE flag. */
putreg32(ADC_INTEN_GLOBAL, LPC17_ADC_INTEN);
#endif
}
else
{
putreg32(0, LPC17_ADC_INTEN);
}
}
/****************************************************************************
* Name: adc_ioctl
*
* Description:
* All ioctl calls will be routed through this method
*
****************************************************************************/
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg)
{
/* No ioctl commands supported */
return -ENOTTY;
}
/****************************************************************************
* Name: adc_interrupt
*
* Description:
* ADC interrupt handler
*
****************************************************************************/
static int adc_interrupt(int irq, void *context)
{
#ifdef CONFIG_ADC_CHANLIST
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv;
uint32_t regval;
unsigned char ch;
int32_t value;
int i;
regval = getreg32(LPC17_ADC_GDR);
for(i = 0; i < CONFIG_ADC_NCHANNELS; i++
{
ch = g_adc_chanlist[i];
regval = getreg32(LPC17_ADC_DR(ch));
if(regval&ADC_DR_DONE)
{
priv->count[ch]++;
priv->buf[ch] += regval & 0xfff0;
if (priv->count[ch] >= CONFIG_ADC0_AVERAGE)
{
value = priv->buf[ch] / priv->count[ch];
value <<= 15;
adc_receive(&g_adcdev,ch,value);
priv->buf[ch] = 0;
priv->count[ch] = 0;
}
}
}
return OK;
#else
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv;
uint32_t regval;
unsigned char ch;
int32_t value;
regval = getreg32(LPC17_ADC_GDR);
ch = (regval >> 24) & 0x07;
priv->buf[ch] += regval & 0xfff0;
priv->count[ch]++;
if (priv->count[ch] >= CONFIG_ADC0_AVERAGE)
{
value = priv->buf[ch] / priv->count[ch];
value <<= 15;
adc_receive(&g_adcdev,ch,value);
priv->buf[ch] = 0;
priv->count[ch] = 0;
}
return OK;
#endif
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lpc17_adcinitialize
*
* Description:
* Initialize the adc
*
* Returned Value:
* Valid can device structure reference on succcess; a NULL on failure
*
****************************************************************************/
FAR struct adc_dev_s *lpc17_adcinitialize(void)
{
return &g_adcdev;
}
#endif /* CONFIG_LPC17_ADC */