/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_ethernet.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_LPC17_ETHERNET)
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <debug.h>
#include <wdog.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <net/uip/uip.h>
#include <net/uip/uip-arp.h>
#include <net/uip/uip-arch.h>
#include "chip.h"
#include "up_arch.h"
#include "lpc17_syscon.h"
#include "lpc17_ethernet.h"
#include "lpc17_internal.h"
#include <arch/board/board.h>
/* Does this chip have and ethernet controller? */
#if LPC17_NETHCONTROLLERS > 0
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_LPC17_NINTERFACES determines the number of physical interfaces
* that will be supported.
*/
#if !defined(CONFIG_LPC17_NINTERFACES) || CONFIG_LPC17_NINTERFACES > LPC17_NETHCONTROLLERS
# define CONFIG_LPC17_NINTERFACES LPC17_NETHCONTROLLERS
#endif
/* The logic here has a few hooks for support for multiple interfaces, but
* that capability is not yet in place (and I won't worry about it until I get
* the first multi-interface LPC17xx).
*/
#if CONFIG_LPC17_NINTERFACES > 1
# warning "Only a single ethernet controller is supported"
# undef CONFIG_LPC17_NINTERFACES
# define CONFIG_LPC17_NINTERFACES 1
#endif
/* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define LPC17_WDDELAY (1*CLK_TCK)
#define LPC17_POLLHSEC (1*2)
/* TX timeout = 1 minute */
#define LPC17_TXTIMEOUT (60*CLK_TCK)
/* This is a helper pointer for accessing the contents of the Ethernet header */
#define BUF ((struct uip_eth_hdr *)priv->lp_dev.d_buf)
/* This is the number of ethernet GPIO pins that must be configured */
#define GPIO_NENET_PINS 10
/* Register debug */
#ifndef CONFIG_DEBUG
# undef CONFIG_LPC17_ENET_REGDEBUG
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* The lpc17_driver_s encapsulates all state information for a single hardware
* interface
*/
struct lpc17_driver_s
{
bool lp_bifup; /* true:ifup false:ifdown */
WDOG_ID lp_txpoll; /* TX poll timer */
WDOG_ID lp_txtimeout; /* TX timeout timer */
/* This holds the information visible to uIP/NuttX */
struct uip_driver_s lp_dev; /* Interface understood by uIP */
};
/****************************************************************************
* Private Data
****************************************************************************/
/* Array of ethernet driver status structures */
static struct lpc17_driver_s g_ethdrvr[CONFIG_LPC17_NINTERFACES];
/* ENET pins are on P1[0,1,4,6,8,9,10,14,15] + MDC on P1[16] or P2[8] and
* MDIO on P1[17] or P2[9]. The board.h file will define GPIO_ENET_MDC and
* PGIO_ENET_MDIO to selec which pin setting to use.
*
* On older Rev '-' devices, P1[6] ENET-TX_CLK would also have be to configured.
*/
static const uint16_t g_enetpins[GPIO_NENET_PINS] =
{
GPIO_ENET_TXD0, GPIO_ENET_TXD1, GPIO_ENET_TXEN, GPIO_ENET_CRS, GPIO_ENET_RXD0,
GPIO_ENET_RXD1, GPIO_ENET_RXER, GPIO_ENET_REFCLK, GPIO_ENET_MDC, GPIO_ENET_MDIO
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Register operations ********************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static void lpc17_printreg(uint32_t addr, uint32_t val, bool iswrite);
static void lpc17_checkreg(uint32_t addr, uint32_t val, bool iswrite);
static uint32_t lpc17_getreg(uint32_t addr);
static void lpc17_putreg(uint32_t val, uint32_t addr);
static void lpc17_showpins(void);
#else
# define lpc17_getreg(addr) getreg32(addr)
# define lpc17_putreg(val,addr) putreg32(val,addr)
# define lpc17_showpins()
#endif
/* Common TX logic */
static int lpc17_transmit(FAR struct lpc17_driver_s *priv);
static int lpc17_uiptxpoll(struct uip_driver_s *dev);
/* Interrupt handling */
static void lpc17_receive(FAR struct lpc17_driver_s *priv);
static void lpc17_txdone(FAR struct lpc17_driver_s *priv);
static int lpc17_interrupt(int irq, FAR void *context);
/* Watchdog timer expirations */
static void lpc17_polltimer(int argc, uint32_t arg, ...);
static void lpc17_txtimeout(int argc, uint32_t arg, ...);
/* NuttX callback functions */
static int lpc17_ifup(struct uip_driver_s *dev);
static int lpc17_ifdown(struct uip_driver_s *dev);
static int lpc17_txavail(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int lpc17_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
static int lpc17_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif
/* Initialization functions */
static void lpc17_phywrite(uint8_t phyaddr, uint8_t regaddr, uint16_t phydata);
static uint16_t lpc17_phyread(uint8_t phyaddr, uint8_t regaddr);
/****************************************************************************
* Private Functions
****************************************************************************/
/*******************************************************************************
* Name: lpc17_printreg
*
* Description:
* Print the contents of an LPC17xx register operation
*
*******************************************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static void lpc17_printreg(uint32_t addr, uint32_t val, bool iswrite)
{
lldbg("%08x%s%08x\n", addr, iswrite ? "<-" : "->", val);
}
#endif
/*******************************************************************************
* Name: lpc17_checkreg
*
* Description:
* Get the contents of an LPC17xx register
*
*******************************************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static void lpc17_checkreg(uint32_t addr, uint32_t val, bool iswrite)
{
static uint32_t prevaddr = 0;
static uint32_t preval = 0;
static uint32_t count = 0;
static bool prevwrite = false;
/* Is this the same value that we read from/wrote to the same register last time?
* Are we polling the register? If so, suppress the output.
*/
if (addr == prevaddr && val == preval && prevwrite == iswrite)
{
/* Yes.. Just increment the count */
count++;
}
else
{
/* No this is a new address or value or operation. Were there any
* duplicate accesses before this one?
*/
if (count > 0)
{
/* Yes.. Just one? */
if (count == 1)
{
/* Yes.. Just one */
lpc17_printreg(prevaddr, preval, prevwrite);
}
else
{
/* No.. More than one. */
lldbg("[repeats %d more times]\n", count);
}
}
/* Save the new address, value, count, and operation for next time */
prevaddr = addr;
preval = val;
count = 0;
prevwrite = iswrite;
/* Show the new regisgter access */
lpc17_printreg(addr, val, iswrite);
}
}
#endif
/*******************************************************************************
* Name: lpc17_getreg
*
* Description:
* Get the contents of an LPC17xx register
*
*******************************************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static uint32_t lpc17_getreg(uint32_t addr)
{
/* Read the value from the register */
uint32_t val = getreg32(addr);
/* Check if we need to print this value */
lpc17_checkreg(addr, val, false);
return val;
}
#endif
/*******************************************************************************
* Name: lpc17_putreg
*
* Description:
* Set the contents of an LPC17xx register to a value
*
*******************************************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static void lpc17_putreg(uint32_t val, uint32_t addr)
{
/* Check if we need to print this value */
lpc17_checkreg(addr, val, true);
/* Write the value */
putreg32(val, addr);
}
#endif
/*******************************************************************************
* Name: lpc17_showpins
*
* Description:
* Dump GPIO register
*
*******************************************************************************/
#ifdef CONFIG_LPC17_ENET_REGDEBUG
static void lpc17_showpins(void)
{
lpc17_dumpgpio(GPIO_PORT0|GPIO_PIN0, "P0[1-15]");
lpc17_dumpgpio(GPIO_PORT0|GPIO_PIN16, "P0[16-31]");
}
#endif
/****************************************************************************
* Function: lpc17_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
static int lpc17_transmit(FAR struct lpc17_driver_s *priv)
{
/* Verify that the hardware is ready to send another packet. If we get
* here, then we are committed to sending a packet; Higher level logic
* must have assured that there is not transmission in progress.
*/
/* Increment statistics */
/* Disable Ethernet interrupts */
/* Send the packet: address=priv->lp_dev.d_buf, length=priv->lp_dev.d_len */
/* Restore Ethernet interrupts */
/* Setup the TX timeout watchdog (perhaps restarting the timer) */
(void)wd_start(priv->lp_txtimeout, LPC17_TXTIMEOUT, lpc17_txtimeout, 1, (uint32_t)priv);
return OK;
}
/****************************************************************************
* Function: lpc17_uiptxpoll
*
* Description:
* The transmitter is available, check if uIP has any outgoing packets ready
* to send. This is a callback from uip_poll(). uip_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
static int lpc17_uiptxpoll(struct uip_driver_s *dev)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (priv->lp_dev.d_len > 0)
{
uip_arp_out(&priv->lp_dev);
lpc17_transmit(priv);
/* Check if there is room in the device to hold another packet. If not,
* return a non-zero value to terminate the poll.
*/
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return 0;
}
/****************************************************************************
* Function: lpc17_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void lpc17_receive(FAR struct lpc17_driver_s *priv)
{
do
{
/* Check for errors and update statistics */
/* Check if the packet is a valid size for the uIP buffer configuration */
/* Copy the data data from the hardware to priv->lp_dev.d_buf. Set
* amount of data in priv->lp_dev.d_len
*/
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv6
if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
#else
if (BUF->type == HTONS(UIP_ETHTYPE_IP))
#endif
{
uip_arp_ipin();
uip_input(&priv->lp_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->lp_dev.d_len > 0)
{
uip_arp_out(&priv->lp_dev);
lpc17_transmit(priv);
}
}
else if (BUF->type == htons(UIP_ETHTYPE_ARP))
{
uip_arp_arpin(&priv->lp_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->lp_dev.d_len > 0)
{
lpc17_transmit(priv);
}
}
}
while (1); /* While there are more packets to be processed */
}
/****************************************************************************
* Function: lpc17_txdone
*
* Description:
* An interrupt was received indicating that the last TX packet(s) is done
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void lpc17_txdone(FAR struct lpc17_driver_s *priv)
{
/* Check for errors and update statistics */
/* If no further xmits are pending, then cancel the TX timeout */
wd_cancel(priv->lp_txtimeout);
/* Then poll uIP for new XMIT data */
(void)uip_poll(&priv->lp_dev, lpc17_uiptxpoll);
}
/****************************************************************************
* Function: lpc17_interrupt
*
* Description:
* Hardware interrupt handler
*
* Parameters:
* irq - Number of the IRQ that generated the interrupt
* context - Interrupt register state save info (architecture-specific)
*
* Returned Value:
* OK on success
*
* Assumptions:
*
****************************************************************************/
static int lpc17_interrupt(int irq, FAR void *context)
{
register FAR struct lpc17_driver_s *priv = &g_ethdrvr[0];
/* Disable Ethernet interrupts */
/* Get and clear interrupt status bits */
/* Handle interrupts according to status bit settings */
/* Check if we received an incoming packet, if so, call lpc17_receive() */
lpc17_receive(priv);
/* Check is a packet transmission just completed. If so, call lpc17_txdone */
lpc17_txdone(priv);
/* Enable Ethernet interrupts (perhaps excluding the TX done interrupt if
* there are no pending transmissions.
*/
return OK;
}
/****************************************************************************
* Function: lpc17_txtimeout
*
* Description:
* Our TX watchdog timed out. Called from the timer interrupt handler.
* The last TX never completed. Reset the hardware and start again.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void lpc17_txtimeout(int argc, uint32_t arg, ...)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)arg;
/* Increment statistics and dump debug info */
/* Then reset the hardware */
/* Then poll uIP for new XMIT data */
(void)uip_poll(&priv->lp_dev, lpc17_uiptxpoll);
}
/****************************************************************************
* Function: lpc17_polltimer
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void lpc17_polltimer(int argc, uint32_t arg, ...)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)arg;
/* Check if there is room in the send another TX packet. We cannot perform
* the TX poll if he are unable to accept another packet for transmission.
*/
/* If so, update TCP timing states and poll uIP for new XMIT data. Hmmm..
* might be bug here. Does this mean if there is a transmit in progress,
* we will missing TCP time state updates?
*/
(void)uip_timer(&priv->lp_dev, lpc17_uiptxpoll, LPC17_POLLHSEC);
/* Setup the watchdog poll timer again */
(void)wd_start(priv->lp_txpoll, LPC17_WDDELAY, lpc17_polltimer, 1, arg);
}
/****************************************************************************
* Function: lpc17_ifup
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int lpc17_ifup(struct uip_driver_s *dev)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
ndbg("Bringing up: %d.%d.%d.%d\n",
dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
(dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24 );
/* Initilize Ethernet interface */
/* Set and activate a timer process */
(void)wd_start(priv->lp_txpoll, LPC17_WDDELAY, lpc17_polltimer, 1, (uint32_t)priv);
/* Enable the Ethernet interrupt */
priv->lp_bifup = true;
up_enable_irq(LPC17_IRQ_ETH);
return OK;
}
/****************************************************************************
* Function: lpc17_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int lpc17_ifdown(struct uip_driver_s *dev)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
irqstate_t flags;
/* Disable the Ethernet interrupt */
flags = irqsave();
up_disable_irq(LPC17_IRQ_ETH);
/* Cancel the TX poll timer and TX timeout timers */
wd_cancel(priv->lp_txpoll);
wd_cancel(priv->lp_txtimeout);
/* Reset the device */
priv->lp_bifup = false;
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: lpc17_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int lpc17_txavail(struct uip_driver_s *dev)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
irqstate_t flags;
flags = irqsave();
/* Ignore the notification if the interface is not yet up */
if (priv->lp_bifup)
{
/* Check if there is room in the hardware to hold another outgoing packet. */
/* If so, then poll uIP for new XMIT data */
(void)uip_poll(&priv->lp_dev, lpc17_uiptxpoll);
}
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: lpc17_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int lpc17_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Function: lpc17_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int lpc17_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct lpc17_driver_s *priv = (FAR struct lpc17_driver_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Function: lpc17_phywrite
*
* Description:
* Write a value to an MII PHY register
*
* Parameters:
* phyaddr - The device address where the PHY was discovered
* regaddr - The address of the PHY register to be written
* phydata - The data to write to the PHY register
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void lpc17_phywrite(uint8_t phyaddr, uint8_t regaddr, uint16_t phydata)
{
uint32_t regval;
/* Set PHY address and PHY register address */
regval = ((uint32_t)phyaddr << ETH_MADR_PHYADDR_SHIFT) |
((uint32_t)regaddr << ETH_MADR_REGADDR_SHIFT);
lpc17_putreg(regval, LPC17_ETH_MADR);
/* Set up to write */
lpc17_putreg(ETH_MCMD_WRITE, LPC17_ETH_MCMD);
/* Write the register data to the PHY */
lpc17_putreg((uint32_t)phydata, LPC17_ETH_MWTD);
/* Wait for the PHY command to complete */
while ((lpc17_getreg(LPC17_ETH_MIND) & ETH_MIND_BUSY) != 0);
}
/****************************************************************************
* Function: lpc17_phywrite
*
* Description:
* Read a value from an MII PHY register
*
* Parameters:
* phyaddr - The device address where the PHY was discovered
* regaddr - The address of the PHY register to be written
*
* Returned Value:
* Data read from the PHY register
*
* Assumptions:
*
****************************************************************************/
static uint16_t lpc17_phyread(uint8_t phyaddr, uint8_t regaddr)
{
uint32_t regval;
lpc17_putreg(0, LPC17_ETH_MCMD);
/* Set PHY address and PHY register address */
regval = ((uint32_t)phyaddr << ETH_MADR_PHYADDR_SHIFT) |
((uint32_t)regaddr << ETH_MADR_REGADDR_SHIFT);
lpc17_putreg(regval, LPC17_ETH_MADR);
/* Set up to read */
lpc17_putreg(ETH_MCMD_READ, LPC17_ETH_MCMD);
/* Wait for the PHY command to complete */
while ((lpc17_getreg(LPC17_ETH_MIND) & (ETH_MIND_BUSY|ETH_MIND_NVALID)) != 0);
lpc17_putreg(0, LPC17_ETH_MCMD);
/* Return the PHY register data */
return (uint16_t)lpc17_getreg(LPC17_ETH_MRDD);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: lpc17_ethinitialize
*
* Description:
* Initialize one Ethernet controller and driver structure.
*
* Parameters:
* intf - Selects the interface to be initialized.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#if LPC17_NETHCONTROLLERS > 1
int lpc17_ethinitialize(int intf)
#else
static inline int lpc17_ethinitialize(int intf)
#endif
{
struct lpc17_driver_s *priv = &g_ethdrvr[intf];
uint32_t regval;
int i;
/* Turn on the ethernet MAC clock */
regval = lpc17_getreg(LPC17_SYSCON_PCONP);
regval |= SYSCON_PCONP_PCENET;
lpc17_putreg(regval, LPC17_SYSCON_PCONP);
/* Configure all GPIO pins needed by ENET */
for (i = 0; i < GPIO_NENET_PINS; i++)
{
(void)lpc17_configgpio(g_enetpins[i]);
}
lpc17_showpins();
/* Attach the IRQ to the driver */
if (irq_attach(LPC17_IRQ_ETH, lpc17_interrupt))
{
/* We could not attach the ISR to the the interrupt */
return -EAGAIN;
}
/* Initialize the driver structure */
memset(g_ethdrvr, 0, CONFIG_LPC17_NINTERFACES*sizeof(struct lpc17_driver_s));
priv->lp_dev.d_ifup = lpc17_ifup; /* I/F down callback */
priv->lp_dev.d_ifdown = lpc17_ifdown; /* I/F up (new IP address) callback */
priv->lp_dev.d_txavail = lpc17_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->lp_dev.d_addmac = lpc17_addmac; /* Add multicast MAC address */
priv->lp_dev.d_rmmac = lpc17_rmmac; /* Remove multicast MAC address */
#endif
priv->lp_dev.d_private = (void*)g_ethdrvr; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
priv->lp_txpoll = wd_create(); /* Create periodic poll timer */
priv->lp_txtimeout = wd_create(); /* Create TX timeout timer */
/* Read the MAC address from the hardware into priv->lp_dev.d_mac.ether_addr_octet */
/* Register the device with the OS so that socket IOCTLs can be performed */
(void)netdev_register(&priv->lp_dev);
return OK;
}
/****************************************************************************
* Name: up_netinitialize
*
* Description:
* Initialize the first network interface. If there are more than one
* interface in the chip, then board-specific logic will have to provide
* this function to determine which, if any, Ethernet controllers should
* be initialized.
*
****************************************************************************/
#if LPC17_NETHCONTROLLERS == 1
void up_netinitialize(void)
{
(void)lpc17_ethinitialize(0);
}
#endif
#endif /* LPC17_NETHCONTROLLERS > 0 */
#endif /* CONFIG_NET && CONFIG_LPC17_ETHERNET */
