/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_gpdma.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/arch.h>
#include "up_internal.h"
#include "up_arch.h"
#include "chip.h"
#include "chip/lpc17_syscon.h"
#include "lpc17_gpdma.h"
#ifdef CONFIG_LPC17_GPDMA
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure represents the state of one DMA channel */
struct lpc17_dmach_s
{
bool inuse; /* True: The channel is in use */
uint8_t chn; /* Channel number */
dma_callback_t callback; /* DMA completion callback function */
void *arg; /* Argument to pass to the callback function */
};
/* This structure represents the state of the LPC17 DMA block */
struct lpc17_gpdma_s
{
sem_t exclsem; /* For exclusive access to the DMA channel list */
/* This is the state of each DMA channel */
struct lpc17_dmach_s dmach[LPC17_NDMACH];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/* The state of the LPC17 DMA block */
static struct lpc17_gpdma_s g_gpdma;
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: gpdma_interrupt
*
* Description:
* The common GPDMA interrupt handler.
*
* Returned Value:
* None
*
****************************************************************************/
static int gpdma_interrupt(int irq, FAR void *context)
{
struct lpc17_dmach_s *dmach;
uint32_t regval;
uint32_t chbit;
int result;
int i;
/* Check each DMA channel */
for (i = 0; i < LPC17_NDMACH; i++)
{
chbit = DMACH((uint32_t)i);
/* Is there an interrupt pending for this channel? If the bit for
* this channel is set, that indicates that a specific DMA channel
* interrupt request is active. The request can be generated from
* either the error or terminal count interrupt requests.
*/
regval = getreg32(LPC17_DMA_INTST);
if ((regval & chbit) != 0)
{
/* Yes.. Is this channel assigned? Is there a callback function? */
dmach = &g_gpdma.dmach[i];
if (dmach->inuse && dmach->callback)
{
/* Yes.. did an error occur? */
regval = getreg32(LPC17_DMA_INTERRST);
if ((regval & chbit) != 0)
{
/* Yes.. report error status */
result = -EIO;
}
/* Then this must be a terminal transfer event */
else
{
/* Let's make sure it is the terminal transfer event. */
regval = getreg32(LPC17_DMA_INTTCST);
if ((regval & chbit) != 0)
{
result = OK;
}
/* This should not happen */
else
{
result = -EINVAL;
}
}
/* Perform the callback */
dmach->callback((DMA_HANDLE)dmach, dmach->arg, result);
}
/* Disable this channel, mask any further interrupts for
* this channel, and clear any pending interrupts.
*/
lpc17_dmastop((DMA_HANDLE)dmach);
}
}
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_dmainitialize
*
* Description:
* Initialize the GPDMA subsystem.
*
* Returned Value:
* Zero on success; A negated errno value on failure.
*
****************************************************************************/
void weak_function up_dmainitialize(void)
{
uint32_t regval;
int ret;
int i;
/* Enable clocking to the GPDMA block */
regval = getreg32(LPC17_SYSCON_PCONP);
regval |= SYSCON_PCONP_PCGPDMA;
putreg32(regval, LPC17_SYSCON_PCONP);
/* Reset all channel configurations */
for (i = 0; i < LPC17_NDMACH; i++)
{
putreg32(0, LPC17_DMACH_CONFIG(i));
}
/* Clear all DMA interrupts */
putreg32(DMACH_ALL, LPC17_DMA_INTTCCLR);
putreg32(DMACH_ALL, LPC17_DMA_INTERRCLR);
/* Initialize the DMA state structure */
sem_init(&g_gpdma.exclsem, 0, 1);
for (i = 0; i < LPC17_NDMACH; i++)
{
g_gpdma.dmach[i].chn = i; /* Channel number */
g_gpdma.dmach[i].inuse = false; /* Channel is not in-use */
}
/* Attach and enable the common interrupt handler */
ret = irq_attach(LPC17_IRQ_GPDMA, gpdma_interrupt);
if (ret == OK)
{
up_enable_irq(LPC17_IRQ_GPDMA);
}
}
/****************************************************************************
* Name: lpc17_dmaconfigure
*
* Description:
* Configure a DMA request. Each DMA request may have two different DMA
* request sources. This associates one of the sources with a DMA request.
*
* Returned Value:
* None
*
****************************************************************************/
void lpc17_dmaconfigure(uint8_t dmarequest, bool alternate)
{
uint32_t regval;
DEBUGASSERT(dmarequest < LPC17_NDMAREQ);
#ifdef LPC176x
/* For the LPC176x family, only request numbers 8-15 have DMASEL bits */
if (dmarequest < 8)
{
return;
}
dmarequest -= 8;
#endif
/* Set or clear the DMASEL bit corresponding to the request number */
regval = getreg32(LPC17_SYSCON_DMAREQSEL);
if (alternate)
{
regval |= (1 << dmarequest);
}
else
{
regval &= ~(1 << dmarequest);
}
putreg32(regval, LPC17_SYSCON_DMAREQSEL);
}
/****************************************************************************
* Name: lpc17_dmachannel
*
* Description:
* Allocate a DMA channel. This function sets aside a DMA channel and
* gives the caller exclusive access to the DMA channel.
*
* Returned Value:
* One success, this function returns a non-NULL, void* DMA channel
* handle. NULL is returned on any failure. This function can fail only
* if no DMA channel is available.
*
****************************************************************************/
DMA_HANDLE lpc17_dmachannel(void)
{
struct lpc17_dmach_s *dmach = NULL;
int ret;
int i;
/* Get exclusive access to the GPDMA state structure */
do
{
ret = sem_wait(&g_gpdma.exclsem);
DEBUGASSERT(ret == 0 || errno == EINTR);
}
while (ret < 0);
/* Find an available DMA channel */
for (i = 0; i < LPC17_NDMACH; i++)
{
if (!g_gpdma.dmach[i].inuse)
{
/* Found one! */
dmach = &g_gpdma.dmach[i];
g_gpdma.dmach[i].inuse = true;
break;
}
}
/* Return what we found (or not) */
sem_post(&g_gpdma.exclsem);
return (DMA_HANDLE)dmach;
}
/****************************************************************************
* Name: lpc17_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must
* NEVER be used again until lpc17_dmachannel() is called again to re-gain
* a valid handle.
*
* Returned Value:
* None
*
****************************************************************************/
void lpc17_dmafree(DMA_HANDLE handle)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
DEBUGASSERT(dmach && dmach->inuse);
/* Make sure that the DMA channel was properly stopped */
lpc17_dmastop(handle);
/* Mark the channel available. This is an atomic operation and needs no
* special protection.
*/
dmach->inuse = false;
}
/****************************************************************************
* Name: lpc17_dmasetup
*
* Description:
* Configure DMA for one transfer.
*
****************************************************************************/
int lpc17_dmasetup(DMA_HANDLE handle, uint32_t control, uint32_t config,
uint32_t srcaddr, uint32_t destaddr, size_t nxfrs)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
uint32_t chbit;
uint32_t regval;
uint32_t base;
DEBUGASSERT(dmach && dmach->inuse);
chbit = DMACH((uint32_t)dmach->chn);
base = LPC17_DMACH_BASE((uint32_t)dmach->chn);
/* Put the channel in a known state. Zero disables everything */
putreg32(0, base + LPC17_DMACH_CONTROL_OFFSET);
putreg32(0, base + LPC17_DMACH_CONFIG_OFFSET);
/* "Programming a DMA channel
*
* 1. "Choose a free DMA channel with the priority needed. DMA channel 0
* has the highest priority and DMA channel 7 the lowest priority.
*/
regval = getreg32(LPC17_DMA_ENBLDCHNS);
if ((regval & chbit) != 0)
{
/* There is an active DMA on this channel! */
return -EBUSY;
}
/* 2. "Clear any pending interrupts on the channel to be used by writing
* to the DMACIntTCClear and DMACIntErrClear register. The previous
* channel operation might have left interrupt active.
*/
putreg32(chbit, LPC17_DMA_INTTCCLR);
putreg32(chbit, LPC17_DMA_INTERRCLR);
/* 3. "Write the source address into the DMACCxSrcAddr register. */
putreg32(srcaddr, base + LPC17_DMACH_SRCADDR_OFFSET);
/* 4. "Write the destination address into the DMACCxDestAddr register. */
putreg32(destaddr, base + LPC17_DMACH_DESTADDR_OFFSET);
/* 5. "Write the address of the next LLI into the DMACCxLLI register. If
* the transfer comprises of a single packet of data then 0 must be
* written into this register.
*/
putreg32(0, base + LPC17_DMACH_LLI_OFFSET);
/* 6. "Write the control information into the DMACCxControl register."
*
* The caller provides all CONTROL register fields except for the transfer
* size which is passed as a separate parameter and for the terminal count
* interrupt enable bit which is controlled by the driver.
*/
regval = control & ~(DMACH_CONTROL_XFRSIZE_MASK|DMACH_CONTROL_I);
regval |= ((uint32_t)nxfrs << DMACH_CONTROL_XFRSIZE_SHIFT);
putreg32(regval, base + LPC17_DMACH_CONTROL_OFFSET);
/* 7. "Write the channel configuration information into the DMACCxConfig
* register. If the enable bit is set then the DMA channel is
* automatically enabled."
*
* Only the SRCPER, DSTPER, and XFRTTYPE fields of the CONFIG register
* are provided by the caller. Little endian is assumed.
*/
regval = config & (DMACH_CONFIG_SRCPER_MASK|DMACH_CONFIG_DSTPER_MASK|
DMACH_CONFIG_XFRTYPE_MASK);
putreg32(regval, base + LPC17_DMACH_CONFIG_OFFSET);
return OK;
}
/****************************************************************************
* Name: lpc17_dmastart
*
* Description:
* Start the DMA transfer
*
****************************************************************************/
int lpc17_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
uint32_t regval;
uint32_t chbit;
uint32_t base;
DEBUGASSERT(dmach && dmach->inuse && callback);
/* Save the callback information */
dmach->callback = callback;
dmach->arg = arg;
/* Clear any pending DMA interrupts */
chbit = DMACH((uint32_t)dmach->chn);
putreg32(chbit, LPC17_DMA_INTTCCLR);
putreg32(chbit, LPC17_DMA_INTERRCLR);
/* Enable terminal count interrupt */
base = LPC17_DMACH_BASE((uint32_t)dmach->chn);
regval = getreg32(base + LPC17_DMACH_CONTROL_OFFSET);
regval |= DMACH_CONTROL_I;
putreg32(regval, base + LPC17_DMACH_CONTROL_OFFSET);
/* Enable the channel and unmask terminal count and error interrupts.
* According to the user manual, zero masks and one unmasks (hence,
* these are really enables).
*/
regval = getreg32(base + LPC17_DMACH_CONFIG_OFFSET);
regval |= (DMACH_CONFIG_E | DMACH_CONFIG_IE | DMACH_CONFIG_ITC);
putreg32(regval, base + LPC17_DMACH_CONFIG_OFFSET);
return OK;
}
/****************************************************************************
* Name: lpc17_dmastop
*
* Description:
* Cancel the DMA. After lpc17_dmastop() is called, the DMA channel is
* reset and lpc17_dmasetup() must be called before lpc17_dmastart() can be
* called again
*
****************************************************************************/
void lpc17_dmastop(DMA_HANDLE handle)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
uint32_t regaddr;
uint32_t regval;
uint32_t chbit;
DEBUGASSERT(dmach && dmach->inuse);
/* Disable this channel and mask any further interrupts from the channel.
* this channel. The channel is disabled by clearning the channel
* enable bit. Any outstanding data in the FIFO�s is lost.
*/
regaddr = LPC17_DMACH_CONFIG((uint32_t)dmach->chn);
regval = getreg32(regaddr);
regval &= ~(DMACH_CONFIG_E | DMACH_CONFIG_IE | DMACH_CONFIG_ITC);
putreg32(regval, regaddr);
/* Clear any pending interrupts for this channel */
chbit = DMACH((uint32_t)dmach->chn);
putreg32(chbit, LPC17_DMA_INTTCCLR);
putreg32(chbit, LPC17_DMA_INTERRCLR);
}
/****************************************************************************
* Name: lpc17_dmasample
*
* Description:
* Sample DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void lpc17_dmasample(DMA_HANDLE handle, struct lpc17_dmaregs_s *regs)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
uint32_t base;
DEBUGASSERT(dmach);
/* Sample the global DMA registers */
regs->gbl.intst = getreg32(LPC17_DMA_INTST);
regs->gbl.inttcst = getreg32(LPC17_DMA_INTTCST);
regs->gbl.interrst = getreg32(LPC17_DMA_INTERRST);
regs->gbl.rawinttcst = getreg32(LPC17_DMA_RAWINTTCST);
regs->gbl.rawinterrst = getreg32(LPC17_DMA_RAWINTERRST);
regs->gbl.enbldchns = getreg32(LPC17_DMA_ENBLDCHNS);
regs->gbl.softbreq = getreg32(LPC17_DMA_SOFTBREQ);
regs->gbl.softsreq = getreg32(LPC17_DMA_SOFTSREQ);
regs->gbl.softlbreq = getreg32(LPC17_DMA_SOFTLBREQ);
regs->gbl.softlsreq = getreg32(LPC17_DMA_SOFTLSREQ);
regs->gbl.config = getreg32(LPC17_DMA_CONFIG);
regs->gbl.sync = getreg32(LPC17_DMA_SYNC);
/* Sample the DMA channel registers */
base = LPC17_DMACH_BASE((uint32_t)dmach->chn);
regs->ch.srcaddr = getreg32(base + LPC17_DMACH_SRCADDR_OFFSET);
regs->ch.destaddr = getreg32(base + LPC17_DMACH_DESTADDR_OFFSET);
regs->ch.lli = getreg32(base + LPC17_DMACH_LLI_OFFSET);
regs->ch.control = getreg32(base + LPC17_DMACH_CONTROL_OFFSET);
regs->ch.config = getreg32(base + LPC17_DMACH_CONFIG_OFFSET);
}
#endif /* CONFIG_DEBUG_DMA */
/****************************************************************************
* Name: lpc17_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void lpc17_dmadump(DMA_HANDLE handle, const struct lpc17_dmaregs_s *regs,
const char *msg)
{
struct lpc17_dmach_s *dmach = (DMA_HANDLE)handle;
uint32_t base;
DEBUGASSERT(dmach);
/* Dump the sampled global DMA registers */
dmadbg("Global GPDMA Registers: %s\n", msg);
dmadbg(" INTST[%08x]: %08x\n",
LPC17_DMA_INTST, regs->gbl.intst);
dmadbg(" INTTCST[%08x]: %08x\n",
LPC17_DMA_INTTCST, regs->gbl.inttcst);
dmadbg(" INTERRST[%08x]: %08x\n",
LPC17_DMA_INTERRST, regs->gbl.interrst);
dmadbg(" RAWINTTCST[%08x]: %08x\n",
LPC17_DMA_RAWINTTCST, regs->gbl.rawinttcst);
dmadbg(" RAWINTERRST[%08x]: %08x\n",
LPC17_DMA_RAWINTERRST, regs->gbl.rawinterrst);
dmadbg(" ENBLDCHNS[%08x]: %08x\n",
LPC17_DMA_ENBLDCHNS, regs->gbl.enbldchns);
dmadbg(" SOFTBREQ[%08x]: %08x\n",
LPC17_DMA_SOFTBREQ, regs->gbl.softbreq);
dmadbg(" SOFTSREQ[%08x]: %08x\n",
LPC17_DMA_SOFTSREQ, regs->gbl.softsreq);
dmadbg(" SOFTLBREQ[%08x]: %08x\n",
LPC17_DMA_SOFTLBREQ, regs->gbl.softlbreq);
dmadbg(" SOFTLSREQ[%08x]: %08x\n",
LPC17_DMA_SOFTLSREQ, regs->gbl.softlsreq);
dmadbg(" CONFIG[%08x]: %08x\n",
LPC17_DMA_CONFIG, regs->gbl.config);
dmadbg(" SYNC[%08x]: %08x\n",
LPC17_DMA_SYNC, regs->gbl.sync);
/* Dump the DMA channel registers */
base = LPC17_DMACH_BASE((uint32_t)dmach->chn);
dmadbg("Channel GPDMA Registers: %d\n", dmach->chn);
dmadbg(" SRCADDR[%08x]: %08x\n",
base + LPC17_DMACH_SRCADDR_OFFSET, regs->ch.srcaddr);
dmadbg(" DESTADDR[%08x]: %08x\n",
base + LPC17_DMACH_DESTADDR_OFFSET, regs->ch.destaddr);
dmadbg(" LLI[%08x]: %08x\n",
base + LPC17_DMACH_LLI_OFFSET, regs->ch.lli);
dmadbg(" CONTROL[%08x]: %08x\n",
base + LPC17_DMACH_CONTROL_OFFSET, regs->ch.control);
dmadbg(" CONFIG[%08x]: %08x\n",
base + LPC17_DMACH_CONFIG_OFFSET, regs->ch.config);
}
#endif /* CONFIG_DEBUG_DMA */
#endif /* CONFIG_LPC17_GPDMA */