/************************************************************************************
* arch/arm/src/lpc17xx/lpc17_spi.h
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_SPI_H
#define __ARCH_ARM_SRC_LPC17XX_LPC17_SPI_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi.h>
#include "chip/lpc17_spi.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifdef CONFIG_LPC17_SPI
#ifndef __ASSEMBLY__
#ifdef __cplusplus
extern "C"
{
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_spiselect, lpc17_status, and lpc17_spicmddata
*
* Description:
* These external functions must be provided by board-specific logic. They are
* implementations of the select, status, and cmddata methods of the SPI interface
* defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods
* including up_spiinitialize()) are provided by common LPC17xx logic. To use
* this common SPI logic on your board:
*
* 1. Provide logic in lpc17_boardinitialize() to configure SPI chip select pins.
* 2. Provide lpc17_spiselect() and lpc17_spistatus() functions in your board-
* specific logic. These functions will perform chip selection and status
* operations using GPIOs in the way your board is configured.
* 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* lpc17_spicmddata() functions in your board-specific logic. This function
* will perform cmd/data selection operations using GPIOs in the way your
* board is configured.
* 3. Add a call to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling mmcsd_spislotinitialize(),
* for example, will bind the SPI driver to the SPI MMC/SD driver).
*
************************************************************************************/
void lpc17_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
uint8_t lpc17_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int lpc17_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
/****************************************************************************
* Name: spi_flush
*
* Description:
* Flush and discard any words left in the RX fifo. This can be called
* from spiselect after a device is deselected (if you worry about such
* things).
*
* Input Parameters:
* dev - Device-specific state data
*
* Returned Value:
* None
*
****************************************************************************/
void spi_flush(FAR struct spi_dev_s *dev);
/****************************************************************************
* Name: lpc17_spiregister
*
* Description:
* If the board supports a card detect callback to inform the SPI-based
* MMC/SD drvier when an SD card is inserted or removed, then
* CONFIG_SPI_CALLBACK should be defined and the following function must
* must be implemented. These functions implements the registercallback
* method of the SPI interface (see include/nuttx/spi.h for details)
*
* Input Parameters:
* dev - Device-specific state data
* callback - The funtion to call on the media change
* arg - A caller provided value to return with the callback
*
* Returned Value:
* 0 on success; negated errno on failure.
*
****************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
nt lpc17_spiregister(FAR struct spi_dev_s *dev, spi_mediachange_t callback,
FAR void *arg);
#endif
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_LPC17_SPI */
#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_SPI_H */
