|
|
/****************************************************************************************************
* arch/arm/src/lpc214x/chip.h
*
* Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __LPC214X_CHIP_H
#define __LPC214X_CHIP_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Memory Map ***************************************************************************************/
#define LPC214X_FLASH_BASE 0x00000000
#define LPC214X_FIO_BASE 0x3fffc000
#define LPC214X_ONCHIP_RAM_BASE 0x40000000
#define LPC214X_USBDMA_RAM_BASE 0x7fd00000
#define LPC214X_BOOT_BLOCK 0x7fffd000
#define LPC214X_EXTMEM_BASE 0x80000000
#define LPC214X_APB_BASE 0xe0000000
#define LPC214X_AHB_BASE 0xf0000000
/* Peripheral Registers ****************************************************************************/
/* FIO Register block base addresses */
#define LPC214X_FIO0_BASE 0x3fffc000 /* Fast I/O 0 base address */
#define LPC214X_FIO1_BASE 0x3fffc020 /* Fast I/O 1 base address */
/* APB Register block base addresses */
#define LPC214X_WD_BASE 0xe0000000 /* Watchdog base address */
#define LPC214X_TMR0_BASE 0xe0004000 /* Timer 0 base address*/
#define LPC214X_TMR1_BASE 0xe0008000 /* Timer 1 base address */
#define LPC214X_UART0_BASE 0xe000c000 /* UART0 base address */
#define LPC214X_UART1_BASE 0xe0010000 /* UART1 base address */
#define LPC214X_PWM_BASE 0xe0014000 /* Pulse width modulator (PWM) base address */
#define LPC214X_I2C0_BASE 0xe001c000 /* I2C0 base address */
#define LPC214X_SPI0_BASE 0xe0020000 /* Serial Peripheral Interface 0 (SPI0) base */
#define LPC214X_RTC_BASE 0xe0024000 /* Real Time Clock (RTC) base address */
#define LPC214X_GPIO0_BASE 0xe0028000 /* General Purpose I/O (GPIO) 0 base address */
#define LPC214X_GPIO1_BASE 0xe0028010 /* General Purpose I/O (GPIO) 0 base address */
#define LPC214X_PINSEL_BASE 0xe002c000 /* Pin function select registers */
#define LPC214X_AD0_BASE 0xe0034000 /* Analog to Digital Converter 0 base address*/
#define LPC214X_I2C1_BASE 0xe005c000 /* I2C1 base address */
#define LPC214X_AD1_BASE 0xe0060000 /* Analog to Digital Converter 1 base address */
#define LPC214X_SPI1_BASE 0xe0068000 /* Serial Peripheral Interface 1 (SPI1) base */
#define LPC214X_DAC_BASE 0xe0090000 /* DAC base address */
#define LPC214X_USB_BASE 0xe0090000 /* USB base address */
#define LPC214X_SCB_BASE 0xe01fc000 /* System Control Block (SBC) base address */
#define LPC214X_MAM_BASE 0xe01fc000 /* Memory Accelerator Module (MAM) base address */
#define LPC214X_SCS 0xe01fc1a0 /* System Control and Status flags (SCS) */
#define LPC214X_MEMMAP 0xe01fc040 /* Memory Mapping Control */
#define LPC214X_PLL_BASE 0xe01fc080 /* Phase Locked Loop (PLL) base address */
#define LPC214X_PCON_BASE 0xe01fc0c0 /* Power Control (PCON) base address */
#define LPC214X_APBDIV 0xe01fc100 /* APBDIV Address */
#define LPC214X_EXT_BASE 0xe01fc140 /* External Interrupt base address */
/* AHB Register block base addresses */
#define LPC214X_EMC_BASE 0xffe00000 /* External Memory Controller (EMC) base address */
#define LPC214X_VIC_BASE 0xfffff000 /* Vectored Interrupt Controller (VIC) Base */
/* Watchdog Register Offsets */
#define LPC214X_WD_MOD_OFFSET 0x00 /* Watchdog Mode Register */
#define LPC214X_WD_TC_OFFSET 0x04 /* Watchdog Time Constant Register */
#define LPC214X_WD_FEED_OFFSET 0x08 /* Watchdog Feed Register */
#define LPC214X_WD_TV_OFFSET 0x0C /* Watchdog Time Value Register */
/* Timer 0/1 register offsets */
#define LPC214X_TMR_IR_OFFSET 0x00 /* RW:Interrupt Register */
#define LPC214X_TMR_TCR_OFFSET 0x04 /* RW: Timer Control Register */
#define LPC214X_TMR_TC_OFFSET 0x08 /* RW: Timer Counter */
#define LPC214X_TMR_PR_OFFSET 0x0c /* RW: Prescale Register */
#define LPC214X_TMR_PC_OFFSET 0x10 /* RW: Prescale Counter Register */
#define LPC214X_TMR_MCR_OFFSET 0x14 /* RW: Match Control Register */
#define LPC214X_TMR_MR0_OFFSET 0x18 /* RW: Match Register 0 */
#define LPC214X_TMR_MR1_OFFSET 0x1c /* RW: Match Register 1 */
#define LPC214X_TMR_MR2_OFFSET 0x20 /* RW: Match Register 2 */
#define LPC214X_TMR_MR3_OFFSET 0x24 /* RW: Match Register 3 */
#define LPC214X_TMR_CCR_OFFSET 0x28 /* RW: Capture Control Register */
#define LPC214X_TMR_CR0_OFFSET 0x2c /* R: Capture Register 0 */
#define LPC214X_TMR_CR1_OFFSET 0x30 /* R: Capture Register 1 */
#define LPC214X_TMR_CR2_OFFSET 0x34 /* R: Capture Register 2 */
#define LPC214X_TMR_CR3_OFFSET 0x38 /* RW: Capture Register 3 */
#define LPC214X_TMR_EMR_OFFSET 0x3c /* RW: External Match Register */
#define LPC214X_TMR_CTCR_OFFSET 0x70 /* RW: Count Control Register */
/* UART0/1 Register Offsets */
#define LPC214X_UART_RBR_OFFSET 0x00 /* R: Receive Buffer Register (DLAB=0) */
#define LPC214X_UART_THR_OFFSET 0x00 /* W: Transmit Holding Register (DLAB=0) */
#define LPC214X_UART_DLL_OFFSET 0x00 /* W: Divisor Latch Register (LSB, DLAB=1) */
#define LPC214X_UART_IER_OFFSET 0x04 /* W: Interrupt Enable Register (DLAB=0) */
#define LPC214X_UART_DLM_OFFSET 0x04 /* RW: Divisor Latch Register (MSB, DLAB=1) */
#define LPC214X_UART_IIR_OFFSET 0x08 /* R: Interrupt ID Register */
#define LPC214X_UART_FCR_OFFSET 0x08 /* W: FIFO Control Register */
#define LPC214X_UART_LCR_OFFSET 0x0c /* RW: Line Control Register */
#define LPC214X_UART_MCR_OFFSET 0x10 /* RW: Modem Control REgister (2146/6/8 UART1 Only) */
#define LPC214X_UART_LSR_OFFSET 0x14 /* R: Scratch Pad Register */
#define LPC214X_UART_MSR_OFFSET 0x18 /* RW: MODEM Status Register (2146/6/8 UART1 Only) */
#define LPC214X_UART_SCR_OFFSET 0x1c /* RW: Line Status Register */
#define LPC214X_UART_ACR_OFFSET 0x20 /* RW: Autobaud Control Register */
#define LPC214X_UART_FDR_OFFSET 0x28 /* RW: Fractional Divider Register */
#define LPC214X_UART_TER_OFFSET 0x30 /* RW: Transmit Enable Register */
/* PWM register offsets */
#define LPC214X_PWM_IR_OFFSET 0x00 /* Interrupt Register */
#define LPC214X_PWM_TCR_OFFSET 0x04 /* Timer Control Register */
#define LPC214X_PWM_TC_OFFSET 0x08 /* Timer Counter */
#define LPC214X_PWM_PR_OFFSET 0x0c /* Prescale Register */
#define LPC214X_PWM_PC_OFFSET 0x10 /* Prescale Counter Register */
#define LPC214X_PWM_MCR_OFFSET 0x14 /* Match Control Register */
#define LPC214X_PWM_MR0_OFFSET 0x18 /* Match Register 0 */
#define LPC214X_PWM_MR1_OFFSET 0x1c /* Match Register 1 */
#define LPC214X_PWM_MR2_OFFSET 0x20 /* Match Register 2 */
#define LPC214X_PWM_MR3_OFFSET 0x24 /* Match Register 3 */
#define LPC214X_PWM_MR4_OFFSET 0x40 /* Match Register 4 */
#define LPC214X_PWM_MR5_OFFSET 0x44 /* Match Register 5 */
#define LPC214X_PWM_MR6_OFFSET 0x48 /* Match Register 6 */
#define LPC214X_PWM_PCR_OFFSET 0x4c /* Control Register */
#define LPC214X_PWM_LER_OFFSET 0x50 /* Latch Enable Register */
/* I2C register offsets */
#define LPC214X_I2C_CONSET_OFFSET 0x00 /* Control Set Register */
#define LPC214X_I2C_STAT_OFFSET 0x04 /* Status Register */
#define LPC214X_I2C_DAT_OFFSET 0x08 /* Data Register */
#define LPC214X_I2C_ADR_OFFSET 0x0c /* Slave Address Register */
#define LPC214X_I2C_SCLH_OFFSET 0x10 /* SCL Duty Cycle Register (high half word) */
#define LPC214X_I2C_SCLL_OFFSET 0x14 /* SCL Duty Cycle Register (low half word) */
#define LPC214X_I2C_CONCLR_OFFSET 0x18 /* Control Clear Register */
/* Pin function select register offsets */
#define LPC214X_PINSEL0_OFFSET 0x00 /* Pin function select register 0 */
#define LPC214X_PINSEL1_OFFSET 0x04 /* Pin function select register 1 */
#define LPC214X_PINSEL2_OFFSET 0x14 /* Pin function select register 2 */
/* Analog to Digital (AD) Converter registger offsets */
#define LPC214X_AD_ADCR_OFFSET 0x00 /* A/D Control Register */
#define LPC214X_AD_ADGDR_OFFSET 0x04 /* A/D Global Data Register (only one common register!) */
#define LPC214X_AD_ADGSR_OFFSET 0x08 /* A/D Global Start Register */
#define LPC214X_AD_ADINTEN_OFFSET 0x0c /* A/D Interrupt Enable Register */
#define LPC214X_AD_ADDR0_OFFSET 0x10 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR1_OFFSET 0x14 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR2_OFFSET 0x18 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR3_OFFSET 0x1c /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR4_OFFSET 0x20 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR5_OFFSET 0x24 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR6_OFFSET 0x28 /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADDR7_OFFSET 0x2c /* A/D Chanel 0 Data Register */
#define LPC214X_AD_ADSTAT_OFFSET 0x30 /* A/D Status Register */
/* SPI0 register offsets */
#define LPC214X_SPI0_CR_OFFSET 0x00 /* Control Register 0 */
#define LPC214X_SPI0_SR_OFFSET 0x04 /* Control Register 1 */
#define LPC214X_SPI0_DR_OFFSET 0x08 /* Data Register */
#define LPC214X_SPI0_CCR_OFFSET 0x0c /* Status Register */
#define LPC214X_SPI0_INT_OFFSET 0x1c /* Clock Pre-Scale Regisrer */
/* SPI1 register offsets */
#define LPC214X_SPI1_CR0_OFFSET 0x00 /* Control Register 0 */
#define LPC214X_SPI1_CR1_OFFSET 0x04 /* Control Register 1 */
#define LPC214X_SPI1_DR_OFFSET 0x08 /* Data Register */
#define LPC214X_SPI1_SR_OFFSET 0x0c /* Status Register */
#define LPC214X_SPI1_CPSR_OFFSET 0x10 /* Clock Pre-Scale Regisrer */
#define LPC214X_SPI1_IMSC_OFFSET 0x14 /* Interrupt Mask Set and Clear Register */
#define LPC214X_SPI1_RIS_OFFSET 0x18 /* Raw Interrupt Status Register */
#define LPC214X_SPI1_MIS_OFFSET 0x1c /* Masked Interrupt Status Register */
#define LPC214X_SPI1_ICR_OFFSET 0x20 /* Interrupt Clear Register */
/* RTC register offsets */
#define LPC214X_RTC_ILR_OFFSET 0x00 /* Interrupt Location Register */
#define LPC214X_RTC_CTC_OFFSET 0x04 /* Clock Tick Counter */
#define LPC214X_RTC_CCR_OFFSET 0x08 /* Clock Control Register */
#define LPC214X_RTC_CIIR_OFFSET 0x0c /* Counter Increment Interrupt Register */
#define LPC214X_RTC_AMR_OFFSET 0x10 /* Alarm Mask Register */
#define LPC214X_RTC_CTIME0_OFFSET 0x14 /* Consolidated Time Register 0 */
#define LPC214X_RTC_CTIME1_OFFSET 0x18 /* Consolidated Time Register 1 */
#define LPC214X_RTC_CTIME2_OFFSET 0x1c /* Consolidated Time Register 2 */
#define LPC214X_RTC_SEC_OFFSET 0x20 /* Seconds Register */
#define LPC214X_RTC_MIN_OFFSET 0x24 /* Minutes Register */
#define LPC214X_RTC_HOUR_OFFSET 0x28 /* Hours Register */
#define LPC214X_RTC_DOM_OFFSET 0x2c /* Day Of Month Register */
#define LPC214X_RTC_DOW_OFFSET 0x30 /* Day Of Week Register */
#define LPC214X_RTC_DOY_OFFSET 0x34 /* Day Of Year Register */
#define LPC214X_RTC_MONTH_OFFSET 0x38 /* Months Register */
#define LPC214X_RTC_YEAR_OFFSET 0x3c /* Years Register */
#define LPC214X_RTC_ALSEC_OFFSET 0x60 /* Alarm Seconds Register */
#define LPC214X_RTC_ALMIN_OFFSET 0x64 /* Alarm Minutes Register */
#define LPC214X_RTC_ALHOUR_OFFSET 0x68 /* Alarm Hours Register */
#define LPC214X_RTC_ALDOM_OFFSET 0x6c /* Alarm Day Of Month Register */
#define LPC214X_RTC_ALDOW_OFFSET 0x70 /* Alarm Day Of Week Register */
#define LPC214X_RTC_ALDOY_OFFSET 0x74 /* Alarm Day Of Year Register */
#define LPC214X_RTC_ALMON_OFFSET 0x78 /* Alarm Months Register */
#define LPC214X_RTC_ALYEAR_OFFSET 0x7c /* Alarm Years Register */
#define LPC214X_RTC_PREINT_OFFSET 0x80 /* Prescale Value Register (integer) */
#define LPC214X_RTC_PREFRAC_OFFSET 0x84 /* Prescale Value Register (fraction) */
/* GPIO register offsets */
#define LPC214X_GPIO_PIN_OFFSET 0x00 /* Pin Value Register */
#define LPC214X_GPIO_SET_OFFSET 0x04 /* Pin Output Set Register */
#define LPC214X_GPIO_DIR_OFFSET 0x08 /* Pin Direction Register */
#define LPC214X_GPIO_CLR_OFFSET 0x0c /* Pin Output Clear Register */
/* FIO register offsets */
#define LPC214X_FIO_DIR_OFFSET 0x00 /* Fast GPIO Port Direction Register */
#define LPC214X_FIO_MASK_OFFSET 0x10 /* Fast GPIO Mask Register */
#define LPC214X_FIO_PIN_OFFSET 0x14 /* Fast GPIO Pin Value Register */
#define LPC214X_FIO_SET_OFFSET 0x18 /* Fast GPIO Port Output Set Register */
#define LPC214X_FIO_CLR_OFFSET 0x1c /* Fast GPIO Port Output Clear Register */
/* Memory Accelerator Module (MAM) Regiser Offsets */
#define LPC214X_MAM_CR_OFFSET 0x00 /* MAM Control Offset*/
#define LPC214x_MAM_TIM_OFFSET 0x04 /* MAM Timing Offset */
/* Phase Locked Loop (PLL) Register Offsets */
#define LPC214X_PLL_CON_OFFSET 0x00 /* PLL Control Offset*/
#define LPC214X_PLL_CFG_OFFSET 0x04 /* PLL Configuration Offset */
#define LPC214X_PLL_STAT_OFFSET 0x08 /* PLL Status Offset */
#define LPC214X_PLL_FEED_OFFSET 0x0c /* PLL Feed Offset */
/* Power Control register offsets */
#define LPC214X_PCON_OFFSET 0x00 /* Control Register */
#define LPC214X_PCONP_OFFSET 0x04 /* Peripherals Register */
/* External Interrupt register offsets */
#define LPC214X_EXT_INT_OFFSET 0x00 /* Flag Register */
#define LPC214X_EXT_WAKE_OFFSET 0x04 /* Wakeup Register */
#define LPC214X_EXT_MODE_OFFSET 0x08 /* Mode Register */
#define LPC214X_EXT_POLAR_OFFSET 0x0c /* Polarity Register */
/* External Memory Controller (EMC) definitions */
#define LPC214X_BCFG0_OFFSET 0x00 /* BCFG0 Offset */
#define LPC214X_BCFG1_OFFSET 0x04 /* BCFG1 Offset */
#define LPC214X_BCFG2_OFFSET 0x08 /* BCFG2 Offset */
#define LPC214X_BCFG3_OFFSET 0x0c /* BCFG3 Offset */
/* Vectored Interrupt Controller (VIC) register offsets */
#define LPC214X_VIC_IRQSTATUS_OFFSET 0x00 /* R: IRQ Status Register */
#define LPC214X_VIC_FIQSTATUS_OFFSET 0x04 /* R: FIQ Status Register */
#define LPC214X_VIC_RAWINTR_OFFSET 0x08 /* R: Raw Interrupt Status Register */
#define LPC214X_VIC_INTSELECT_OFFSET 0x0c /* RW: Interrupt Select Register */
#define LPC214X_VIC_INTENABLE_OFFSET 0x10 /* RW: Interrupt Enable Register */
#define LPC214X_VIC_INTENCLEAR_OFFSET 0x14 /* W: Interrupt Enable Clear Register */
#define LPC214X_VIC_SOFTINT_OFFSET 0x18 /* RW: Software Interrupt Register */
#define LPC214X_VIC_SOFTINTCLEAR_OFFSET 0x1c /* W: Software Interrupt Clear Register */
#define LPC214X_VIC_PROTECTION_OFFSET 0x20 /* Protection Enable Register */
#define LPC214X_VIC_VECTADDR_OFFSET 0x30 /* RW: Vector Address Register */
#define LPC214X_VIC_DEFVECTADDR_OFFSET 0x34 /* RW: Default Vector Address Register */
#define LPC214X_VIC_VECTADDR0_OFFSET 0x100 /* RW: Vector Address 0 Register */
#define LPC214X_VIC_VECTADDR1_OFFSET 0x104 /* RW: Vector Address 1 Register */
#define LPC214X_VIC_VECTADDR2_OFFSET 0x108 /* RW: Vector Address 2 Register */
#define LPC214X_VIC_VECTADDR3_OFFSET 0x10c /* RW: Vector Address 3 Register */
#define LPC214X_VIC_VECTADDR4_OFFSET 0x110 /* RW: Vector Address 4 Register */
#define LPC214X_VIC_VECTADDR5_OFFSET 0x114 /* RW: Vector Address 5 Register */
#define LPC214X_VIC_VECTADDR6_OFFSET 0x118 /* RW: Vector Address 6 Register */
#define LPC214X_VIC_VECTADDR7_OFFSET 0x11c /* RW: Vector Address 7 Register */
#define LPC214X_VIC_VECTADDR8_OFFSET 0x120 /* RW: Vector Address 8 Register */
#define LPC214X_VIC_VECTADDR9_OFFSET 0x124 /* RW: Vector Address 9 Register */
#define LPC214X_VIC_VECTADDR10_OFFSET 0x128 /* RW: Vector Address 10 Register */
#define LPC214X_VIC_VECTADDR11_OFFSET 0x12c /* RW: Vector Address 11 Register */
#define LPC214X_VIC_VECTADDR12_OFFSET 0x130 /* RW: Vector Address 12 Register */
#define LPC214X_VIC_VECTADDR13_OFFSET 0x134 /* RW: Vector Address 13 Register */
#define LPC214X_VIC_VECTADDR14_OFFSET 0x138 /* RW: Vector Address 14 Register */
#define LPC214X_VIC_VECTADDR15_OFFSET 0x13c /* RW: Vector Address 15 Register */
#define LPC214X_VIC_VECTCNTL0_OFFSET 0x200 /* RW: Vector Control 0 Register */
#define LPC214X_VIC_VECTCNTL1_OFFSET 0x204 /* RW: Vector Control 1 Register */
#define LPC214X_VIC_VECTCNTL2_OFFSET 0x208 /* RW: Vector Control 2 Register */
#define LPC214X_VIC_VECTCNTL3_OFFSET 0x20c /* RW: Vector Control 3 Register */
#define LPC214X_VIC_VECTCNTL4_OFFSET 0x210 /* RW: Vector Control 4 Register */
#define LPC214X_VIC_VECTCNTL5_OFFSET 0x214 /* RW: Vector Control 5 Register */
#define LPC214X_VIC_VECTCNTL6_OFFSET 0x218 /* RW: Vector Control 6 Register */
#define LPC214X_VIC_VECTCNTL7_OFFSET 0x21c /* RW: Vector Control 7 Register */
#define LPC214X_VIC_VECTCNTL8_OFFSET 0x220 /* RW: Vector Control 8 Register */
#define LPC214X_VIC_VECTCNTL9_OFFSET 0x224 /* RW: Vector Control 9 Register */
#define LPC214X_VIC_VECTCNTL10_OFFSET 0x228 /* RW: Vector Control 10 Register */
#define LPC214X_VIC_VECTCNTL11_OFFSET 0x22c /* RW: Vector Control 11 Register */
#define LPC214X_VIC_VECTCNTL12_OFFSET 0x230 /* RW: Vector Control 12 Register */
#define LPC214X_VIC_VECTCNTL13_OFFSET 0x234 /* RW: Vector Control 13 Register */
#define LPC214X_VIC_VECTCNTL14_OFFSET 0x238 /* RW: Vector Control 14 Register */
#define LPC214X_VIC_VECTCNTL15_OFFSET 0x23c /* RW: Vector Control 15 Register */
/****************************************************************************************************
* Inline Functions
****************************************************************************************************/
/****************************************************************************************************
* Global Function Prototypes
****************************************************************************************************/
#endif /* __LPC214X_CHIP_H */
|
