blob: 6369825899fc373228023a00db1e69f6c5f952de (
plain) (
tree)
|
|
/************************************************************************************
* lpc214x/uart.h
*
* Copyright (C) 2007 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name Gregory Nutt nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __LPC214X_UART_H
#define __LPC214X_UART_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <arch/board/board.h> /* For clock settings */
/************************************************************************************
* Definitions
************************************************************************************/
/* PINSEL0 bit definitions for UART0/1 */
#define LPC214X_UART0_PINSEL 0x00000005 /* PINSEL0 value for UART0 */
#define LPC214X_UART0_PINMASK 0x0000000f /* PINSEL0 mask for UART0 */
#define LPC214X_UART1_PINSEL 0x00050000 /* PINSEL0 value for UART1 */
#define LPC214X_UART1_PINMASK 0x000f0000 /* PINSEL0 mask for UART1 */
/* Derive baud divisor setting from clock settings (see board.h) */
#define UART_BAUD(baud) ((LPC214X_FOSC * LPC214X_PLL_M) / (baud * 16))
/* Interrupt Enable Register (IER) bit definitions */
#define LPC214X_IER_ERBFI (1 << 0) /* Enable receive data available int */
#define LPC214X_IER_ETBEI (1 << 1) /* Enable THR empty Interrupt */
#define LPC214X_IER_ELSI (1 << 2) /* Enable receive line status int */
#define LPC214X_IER_EDSSI (1 << 3) /* Enable MODEM atatus interrupt */
/* Interrupt ID Register(IIR) bit definitions */
#define LPC214X_IIR_NO_INT (1 << 0) /* No interrupts pending */
#define LPC214X_IIR_MS_INT (0 << 1) /* MODEM Status */
#define LPC214X_IIR_THRE_INT (1 << 1) /* Transmit Holding Register Empty */
#define LPC214X_IIR_RDA_INT (2 << 1) /* Receive Data Available */
#define LPC214X_IIR_RLS_INT (3 << 1) /* Receive Line Status */
#define LPC214X_IIR_CTI_INT (6 << 1) /* Character Timeout Indicator */
#define LPC214X_IIR_MASK 0x0e
/* FIFO Control Register (FCR) bit definitions */
#define LPC214X_FCR_FIFO_ENABLE (1 << 0) /* FIFO wnable */
#define LPC214X_FCR_RX_FIFO_RESET (1 << 1) /* Reset receive FIFO */
#define LPC214X_FCR_TX_FIFO_RESET (1 << 2) /* Reset transmit FIFO */
#define LPC214X_FCR_FIFO_TRIG1 (0 << 6) /* Trigger @1 character in FIFO */
#define LPC214X_FCR_FIFO_TRIG4 (1 << 6) /* Trigger @4 characters in FIFO */
#define LPC214X_FCR_FIFO_TRIG8 (2 << 6) /* Trigger @8 characters in FIFO */
#define LPC214X_FCR_FIFO_TRIG14 (3 << 6) /* Trigger @14 characters in FIFO */
/* Line Control Register (LCR) bit definitions */
#define LPC214X_LCR_CHAR_5 (0 << 0) /* 5-bit character length */
#define LPC214X_LCR_CHAR_6 (1 << 0) /* 6-bit character length */
#define LPC214X_LCR_CHAR_7 (2 << 0) /* 7-bit character length */
#define LPC214X_LCR_CHAR_8 (3 << 0) /* 8-bit character length */
#define LPC214X_LCR_STOP_1 (0 << 2) /* 1 stop bit */
#define LPC214X_LCR_STOP_2 (1 << 2) /* 2 stop bits */
#define LPC214X_LCR_PAR_NONE (0 << 3) /* No parity */
#define LPC214X_LCR_PAR_ODD (1 << 3) /* Odd parity */
#define LPC214X_LCR_PAR_EVEN (3 << 3) /* Even parity */
#define LPC214X_LCR_PAR_MARK (5 << 3) /* Mark "1" parity */
#define LPC214X_LCR_PAR_SPACE (7 << 3) /* Space "0" parity */
#define LPC214X_LCR_BREAK_ENABLE (1 << 6) /* Output BREAK */
#define LPC214X_LCR_DLAB_ENABLE (1 << 7) /* Enable divisor latch access */
/* Modem Control Register (MCR) bit definitions */
#define LPC214X_MCR_DTR (1 << 0) /* Data terminal ready */
#define LPC214X_MCR_RTS (1 << 1) /* Request to send */
#define LPC214X_MCR_LB (1 << 4) /* Loopback */
/* Line Status Register (LSR) bit definitions */
#define LPC214X_LSR_RDR (1 << 0) /* Receive data ready */
#define LPC214X_LSR_OE (1 << 1) /* Overrun error */
#define LPC214X_LSR_PE (1 << 2) /* Parity error */
#define LPC214X_LSR_FE (1 << 3) /* Framing error */
#define LPC214X_LSR_BI (1 << 4) /* Break interrupt */
#define LPC214X_LSR_THRE (1 << 5) /* THR empty */
#define LPC214X_LSR_TEMT (1 << 6) /* Transmitter empty */
#define LPC214X_LSR_RXFE (1 << 7) /* Error in receive FIFO */
#define LPC214X_LSR_ERR_MASK 0x1e
/* Modem Status Register (MSR) bit definitions */
#define LPC214X_MSR_DCTS (1 << 0) /* Delta clear to send */
#define LPC214X_MSR_DDSR (1 << 1) /* Delta data set ready */
#define LPC214X_MSR_TERI (1 << 2) /* Trailing edge ring indicator */
#define LPC214X_MSR_DDCD (1 << 3) /* Delta data carrier detect */
#define LPC214X_MSR_CTS (1 << 4) /* Clear to send */
#define LPC214X_MSR_DSR (1 << 5) /* Data set ready */
#define LPC214X_MSR_RI (1 << 6) /* Ring indicator */
#define LPC214X_MSR_DCD (1 << 7) /* Data carrier detect */
/************************************************************************************
* Inline Functions
************************************************************************************/
/************************************************************************************
* Global Function Prototypes
************************************************************************************/
#endif /* __LPC214X_UART_H */
|