/************************************************************************************************
* arch/arm/src/lpc31xx/lpc31_i2c.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC31XX_LPC31_I2C_H
#define __ARCH_ARM_SRC_LPC31XX_LPC31_I2C_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc31_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* I2C register base address offset into the APB1 domain ****************************************/
#define LPC31_I2C0_VBASE (LPC31_APB1_VADDR+LPC31_APB1_I2C0_OFFSET)
#define LPC31_I2C0_PBASE (LPC31_APB1_PADDR+LPC31_APB1_I2C0_OFFSET)
#define LPC31_I2C1_VBASE (LPC31_APB1_VADDR+LPC31_APB1_I2C1_OFFSET)
#define LPC31_I2C1_PBASE (LPC31_APB1_PADDR+LPC31_APB1_I2C1_OFFSET)
/* I2C register offsets (with respect to the I2C base) ******************************************/
#define LPC31_I2C_RX_OFFSET 0x00 /* I2C RX Data FIFO */
#define LPC31_I2C_TX_OFFSET 0x00 /* I2C TX Data FIFO */
#define LPC31_I2C_STAT_OFFSET 0x04 /* I2C Status Register */
#define LPC31_I2C_CTRL_OFFSET 0x08 /* I2C Control Register */
#define LPC31_I2C_CLKHI_OFFSET 0x0c /* I2C Clock Divider high */
#define LPC31_I2C_CLKLO_OFFSET 0x10 /* I2C Clock Divider low */
#define LPC31_I2C_ADR_OFFSET 0x14 /* I2C Slave Address */
#define LPC31_I2C_RXFL_OFFSET 0x18 /* I2C Rx FIFO level */
#define LPC31_I2C_TXFL_OFFSET 0x1c /* I2C Tx FIFO level */
#define LPC31_I2C_RXB_OFFSET 0x20 /* I2C Number of bytes received */
#define LPC31_I2C_TXB_OFFSET 0x24 /* I2C Number of bytes transmitted */
#define LPC31_I2C_STX_OFFSET 0x28 /* Slave Transmit FIFO */
#define LPC31_I2C_STXFL_OFFSET 0x2c /* Slave Transmit FIFO level */
/* I2C register (virtual) addresses *************************************************************/
#define LPC31_I2C0_RX (LPC31_I2C0_VBASE+LPC31_I2C_RX_OFFSET)
#define LPC31_I2C0_TX (LPC31_I2C0_VBASE+LPC31_I2C_TX_OFFSET)
#define LPC31_I2C0_STAT (LPC31_I2C0_VBASE+LPC31_I2C_STAT_OFFSET)
#define LPC31_I2C0_CTRL (LPC31_I2C0_VBASE+LPC31_I2C_CTRL_OFFSET)
#define LPC31_I2C0_CLKHI (LPC31_I2C0_VBASE+LPC31_I2C_CLKHI_OFFSET)
#define LPC31_I2C0_CLKLO (LPC31_I2C0_VBASE+LPC31_I2C_CLKLO_OFFSET)
#define LPC31_I2C0_ADR (LPC31_I2C0_VBASE+LPC31_I2C_ADR_OFFSET)
#define LPC31_I2C0_RXFL (LPC31_I2C0_VBASE+LPC31_I2C_RXFL_OFFSET)
#define LPC31_I2C0_TXFL (LPC31_I2C0_VBASE+LPC31_I2C_TXFL_OFFSET)
#define LPC31_I2C0_RXB (LPC31_I2C0_VBASE+LPC31_I2C_RXB_OFFSET)
#define LPC31_I2C0_TXB (LPC31_I2C0_VBASE+LPC31_I2C_TXB_OFFSET)
#define LPC31_I2C0_STX (LPC31_I2C0_VBASE+LPC31_I2C_STX_OFFSET)
#define LPC31_I2C0_STXFL (LPC31_I2C0_VBASE+LPC31_I2C_STXFL_OFFSET)
#define LPC31_I2C1_RX (LPC31_I2C1_VBASE+LPC31_I2C_RX_OFFSET)
#define LPC31_I2C1_TX (LPC31_I2C1_VBASE+LPC31_I2C_TX_OFFSET)
#define LPC31_I2C1_STAT (LPC31_I2C1_VBASE+LPC31_I2C_STAT_OFFSET)
#define LPC31_I2C1_CTRL (LPC31_I2C1_VBASE+LPC31_I2C_CTRL_OFFSET)
#define LPC31_I2C1_CLKHI (LPC31_I2C1_VBASE+LPC31_I2C_CLKHI_OFFSET)
#define LPC31_I2C1_CLKLO (LPC31_I2C1_VBASE+LPC31_I2C_CLKLO_OFFSET)
#define LPC31_I2C1_ADR (LPC31_I2C1_VBASE+LPC31_I2C_ADR_OFFSET)
#define LPC31_I2C1_RXFL (LPC31_I2C1_VBASE+LPC31_I2C_RXFL_OFFSET)
#define LPC31_I2C1_TXFL (LPC31_I2C1_VBASE+LPC31_I2C_TXFL_OFFSET)
#define LPC31_I2C1_RXB (LPC31_I2C1_VBASE+LPC31_I2C_RXB_OFFSET)
#define LPC31_I2C1_TXB (LPC31_I2C1_VBASE+LPC31_I2C_TXB_OFFSET)
#define LPC31_I2C1_STX (LPC31_I2C1_VBASE+LPC31_I2C_STX_OFFSET)
#define LPC31_I2C1_STXFL (LPC31_I2C1_VBASE+LPC31_I2C_STXFL_OFFSET)
/* I2C register bit definitions *****************************************************************/
/* I2Cn RX Data FIFO I2C0_RX, address 0x1300a000, I2C1_RX, address 0x1300a400 */
#define I2C_RX_DATA_SHIFT (0) /* Bits 0-7: RxData Receive FIFO data bits */
#define I2C_RX_DATA_MASK (0xff << I2C_RX_DATA_HIFT)
/* I2Cn TX Data FIFO I2C0_TX, 0x1300a000, I2C1_TX, address 0x1300a400 */
#define I2C_TX_STOP (1 << 9) /* Bit 9: Issue STOP condition after transmitting byte */
#define I2C_TX_START (1 << 8) /* Bit 8: Issue START condition before transmitting byte */
#define I2C_TX_DATA_SHIFT (0) /* Bits 0-7: TxData Transmit FIFO data bits */
#define I2C_TX_DATA_MASK (0xff << I2C_TX_DATA_SHIFT)
/* I2Cn Status register I2C0_STAT, address 0x1300a004, I2C1_STAT, address 0x1300a404 */
#define I2C_STAT_TFES (1 << 13) /* Bit 13: Slave Transmit FIFO Empty */
#define I2C_STAT_TFFS (1 << 12) /* Bit 12: Slave Transmit FIFO Full */
#define I2C_STAT_TFE (1 << 11) /* Bit 11: Transmit FIFO Empty */
#define I2C_STAT_TFF (1 << 10) /* Bit 10: Transmit FIFO Full */
#define I2C_STAT_RFE (1 << 9) /* Bit 9: Receive FIFO Empty */
#define I2C_STAT_RFF (1 << 8) /* Bit 8: Receive FIFO Full */
#define I2C_STAT_SDA (1 << 7) /* Bit 7: The current value of the SDA signal */
#define I2C_STAT_SCL (1 << 6) /* Bit 6: The current value of the SCL signal */
#define I2C_STAT_ACTIVE (1 << 5) /* Bit 5: Indicates whether the bus is busy */
#define I2C_STAT_DRSI (1 << 4) /* Bit 4: Slave Data Request Interrupt */
#define I2C_STAT_DRMI (1 << 3) /* Bit 3: Master Data Request Interrupt */
#define I2C_STAT_NAI (1 << 2) /* Bit 2: No Acknowledge Interrupt */
#define I2C_STAT_AFI (1 << 1) /* Bit 1: Arbitration Failure Interrupt */
#define I2C_STAT_TDI (1 << 0) /* Bit 0: Transaction Done Interrupt */
/* I2Cn Control register I2C0_CTRL, address 0x1300a008, I2C1_CTRL, address 0x1300a408 */
#define I2C_CTRL_TFFSIE (1 << 10) /* Bit 10: Slave Transmit FIFO Not Full Interrupt Enable */
#define I2C_CTRL_SEVEN (1 << 9) /* Bit 9: Seven-bit slave address */
#define I2C_CTRL_RESET (1 << 8) /* Bit 8: Soft Reset */
#define I2C_CTRL_TFFIE (1 << 7) /* Bit 7: Transmit FIFO Not Full Interrupt Enable */
#define I2C_CTRL_RFDAIE (1 << 6) /* Bit 6: Receive FIFO Data Available Interrupt Enable */
#define I2C_CTRL_RFFIE (1 << 5) /* Bit 5: Receive FIFO Full Interrupt Enable */
#define I2C_CTRL_DRSIE (1 << 4) /* Bit 4: Data Request Slave Transmitter Interrupt Enable */
#define I2C_CTRL_DRMIE (1 << 3) /* Bit 3: Data Request Master Transmitter Interrupt Enable */
#define I2C_CTRL_NAIE (1 << 2) /* Bit 2: Transmitter No Acknowledge Interrupt Enable */
#define I2C_CTRL_AFIE (1 << 1) /* Bit 1: Transmitter Arbitration Failure Interrupt Enable */
#define I2C_CTRL_TDIE (1 << 0) /* Bit 0: Transmit Done Interrupt Enable */
/* I2Cn Clock Divider High I2C0_CLKHI, address 0x1300a00c, I2C1_CLKHI, address 0x1300a40c */
#define I2C_CLKHI_SHIFT (0) /* Bits 0-9: Clock Divisor High */
#define I2C_CLKHI_MASK (0x3ff << I2C_CLKHI_SHIFT)
/* I2Cn Clock Divider Low I2C0_CLKLO, address 0x1300a010, I2C1_CLKLO, address 0x1300a410 */
#define I2C_CLKLO_SHIFT (0) /* Bits 0-9: Clock Divisor Low */
#define I2C_CLKLO_MASK (0x3ff << I2C_CLKLO_SHIFT)
/* I2Cn Slave Addres I2C0_ADDR, address 0x1300a014, I2C1_ADDR, address 0x1300a414 */
#define I2C_ADR_SHIFT (0) /* Bits 0-9: I2C bus slave address */
#define I2C_ADR_MASK (0x3ff << I2C_ADR_SHIFT)
/* I2Cn RX FIFO level I2C0_RXFL, address 0x1300a018, I2C1_RXFL, address 0x1300a018 */
#define I2C_RXFL_SHIFT (0) /* Bits 0-1: Receive FIFO level */
#define I2C_RXFL_MASK (3 << I2C_RXFL_SHIFT)
/* I2Cn TX FIFO level I2C0_TXFL, address 0x1300a01c, I2C1_TXFL, address 0x1300a01c */
#define I2C_TXFL_SHIFT (0) /* Bits 0-1: Receive FIFO level */
#define I2C_TXFL_MASK (3 << I2C_TXFL_SHIFT)
/* I2Cn RX byte count I2C0_RXB, address 0x1300a020, I2C1_RXB, address 0x1300a420 */
#define I2C_RXB_SHIFT (0) /* Bits 0-15: Number of bytes received */
#define I2C_RXB_MASK (0xffff << I2C_RXB_SHIFT)
/* I2Cn TX byte count I2C0_TXB, address 0x1300a024, I2C1_TXB, address 0x1300a424 */
#define I2C_TXB_SHIFT (0) /* Bits 0-15: Number of bytes sent */
#define I2C_TXB_MASK (0xffff << I2C_TXB_SHIFT)
/* I2Cn Slave TX Data FIFO I2C0_STX, address 0x1300a028, I2C1_STX, 0x1300a428 */
#define I2C_STX_SHIFT (0) /* Bits 0-7: Slave Transmit FIFO data */
#define I2C_STX_MASK (0xff << I2C_STX_SHIFT)
/* I2Cn Slave TX FIFO level I2C0_STXFL, address 0x1300a02c, I2C1_STXFL, address 0x1300a42c */
#define I2C_STXFL_SHIFT (0) /* Bits 0-1: Slave Transmit FIFO level */
#define I2C_STXFL_MASK (3 << I2C_STXFL_SHIFT)
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC31XX_LPC31_I2C_H */