path: root/nuttx/arch/arm/src/lpc43xx/Kconfig

#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

comment "LPC43xx Configuration Options"

choice
	prompt "LPC43XX Chip Selection"
	default ARCH_CHIP_LPC4330FET100
	depends on ARCH_CHIP_LPC43XX

config ARCH_CHIP_LPC4310FBD144
	bool "LPC4310FBD144"

config ARCH_CHIP_LPC4310FET100
	bool "LPC4310FET100"

config ARCH_CHIP_LPC4320FBD144
	bool "LPC4320FBD144"

config ARCH_CHIP_LPC4320FET100
	bool "LPC4320FET100"

config ARCH_CHIP_LPC4330FBD144
	bool "LPC4330FBD144"

config ARCH_CHIP_LPC4330FET100
	bool "LPC4330FET100"

config ARCH_CHIP_LPC4330FET180
	bool "LPC4330FET180"

config ARCH_CHIP_LPC4330FET256
	bool "LPC4330FET256"

config ARCH_CHIP_LPC4350FBD208
	bool "LPC4350FBD208"

config ARCH_CHIP_LPC4350FET180
	bool "LPC4350FET180"

config ARCH_CHIP_LPC4350FET256
	bool "LPC4350FET256"

config ARCH_CHIP_LPC4353FBD208
	bool "LPC4353FBD208"

config ARCH_CHIP_LPC4353FET180
	bool "LPC4353FET180"

config ARCH_CHIP_LPC4353FET256
	bool "LPC4353FET256"

config ARCH_CHIP_LPC4357FET180
	bool "LPC4357FET180"

config ARCH_CHIP_LPC4357FBD208
	bool "LPC4357FBD208"

config ARCH_CHIP_LPC4357FET256
	bool "LPC4357FET256"

endchoice

config ARCH_FAMILY_LPC4310
	bool
	default y if ARCH_CHIP_LPC4310FBD144 || ARCH_CHIP_LPC4310FET100

config ARCH_FAMILY_LPC4320
	bool
	default y if ARCH_CHIP_LPC4320FBD144 || ARCH_CHIP_LPC4320FET100

config ARCH_FAMILY_LPC4330
	bool
	default y if ARCH_CHIP_LPC4330FBD144 || ARCH_CHIP_LPC4330FET100 || ARCH_CHIP_LPC4330FET180 || ARCH_CHIP_LPC4330FET256

config ARCH_FAMILY_LPC4350
	bool
	default y if ARCH_CHIP_LPC4350FBD208 || ARCH_CHIP_LPC4350FET180 || ARCH_CHIP_LPC4350FET256

config ARCH_FAMILY_LPC4353
	bool
	default y if ARCH_CHIP_LPC4353FBD208 || ARCH_CHIP_LPC4353FET180 || ARCH_CHIP_LPC4353FET256

config ARCH_FAMILY_LPC4357
	bool
	default y if ARCH_CHIP_LPC4357FET180 || ARCH_CHIP_LPC4357FBD208 || ARCH_CHIP_LPC4357FET256

choice
	prompt "LPC43XX Boot Configuration"
	default BOOT_SRAM
	depends on ARCH_CHIP_LPC43XX
	---help---
		The startup code needs to know if the code is running from internal FLASH,
		external FLASH, SPIFI, or SRAM in order to initialize properly.  Note that
		a boot device is not specified for cases where the code is copied into SRAM;
		those cases are all covered by BOOT_SRAM.

config BOOT_SRAM
	bool "Running from SRAM"

config BOOT_SPIFI
	bool "Running from QuadFLASH"

config BOOT_FLASHA
	bool "Running in internal FLASHA"

config BOOT_FLASHB
	bool "Running in internal FLASHA"

config BOOT_CS0FLASH
	bool "Running in external FLASH CS0"

config BOOT_CS1FLASH
	bool "Running in external FLASH CS1"

config BOOT_CS2FLASH
	bool "Running in external FLASH CS2"

config BOOT_CS3FLASH
	bool "Running in external FLASH CS3"

endchoice

menu "LPC43xx Peripheral Support"

config LPC43_ADC0
	bool "ADC0"
	default n

config LPC43_ADC1
	bool "ADC1"
	default n

config LPC43_ATIMER
	bool "Alarm timer"
	default n

config LPC43_CAN1
	bool "C_CAN1"
	default n

config LPC43_CAN2
	bool "C_CAN1"
	default n

config LPC43_DAC
	bool "DAC"
	default n

config LPC43_EMC
	bool "External Memory Controller (EMC)"
	default n

config LPC43_ETHERNET
	bool "Ethernet"
	default n

config LPC43_EVNTMNTR
	bool "Event Monitor"
	default n

config LPC43_GPDMA
	bool "GPDMA"
	default n

config LPC43_I2C0
	bool "I2C0"
	default n

config LPC43_I2C1
	bool "I2C1"
	default n

config LPC43_I2S0
	bool "I2S0"
	default n

config LPC43_I2S1
	bool "I2S1"
	default n

config LPC43_LCD
	bool "LCD"
	default n

config LPC43_MCPWM
	bool "Motor Control PWM (MCPWM)"
	default n

config LPC43_QEI
	bool "Quadrature Controller Interface (QEI)"
	default n

config LPC43_RIT
	bool "Repetitive Interrupt Timer (RIT)"
	default n

config LPC43_RTC
	bool "Real Time Clock (RTC)"
	default n

config LPC43_SCT
	bool "State Configurable Timer (SCT)"
	default n

config LPC43_SDMMC
	bool "SD/MMC"
	default n

config LPC43_SPI
	bool "SPI"
	default n

config LPC43_SPIFI
	bool "SPI Flash Interface (SPIFI)"
	default n

config LPC43_SSP0
	bool "SSP0"
	default n

config LPC43_SSP1
	bool "SSP1"
	default n

config LPC43_TMR0
	bool "ADC1"
	default n

config LPC43_TMR1
	bool "Timer 1"
	default n

config LPC43_TMR2
	bool "Timer 2"
	default n

config LPC43_TMR3
	bool "Timer 3"
	default n

config LPC43_USART0
	bool "USART0"
	select ARCH_HAVE_USART0
	default n

config LPC43_UART1
	bool "UART1"
	select ARCH_HAVE_UART1
	default n

config LPC43_USART2
	bool "USART2"
	select ARCH_HAVE_USART2
	default n

config LPC43_USART3
	bool "USART3"
	select ARCH_HAVE_USART3
	default n

config LPC43_USB0
	bool "USB0"
	default n

config LPC43_USB1
	bool "USB1"
	default n

config LPC43_USB1_ULPI
	bool "USB1 with ULPI"
	default n
	depends on LPC43_USB1

config LPC43_WWDT
	bool "Windowing Watchdog Timer (WWDT)"
	default n

endmenu

config SERIAL_TERMIOS
	bool "Serial driver TERMIOS supported"
	depends on LPC43_USART0 || LPC43_UART1 || LPC43_USART2 || LPC43_USART3
	default n
	---help---
		Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
		If this is not defined, then the terminal settings (baud, parity, etc).
		are not configurable at runtime; serial streams cannot be flushed, etc..