|
|
/****************************************************************************************************
* arch/arm/src/lpc43xx/chip/lpc43_cgu.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CGU_H
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CGU_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
/****************************************************************************************************
* Pre-processor Definitions
****************************************************************************************************/
/* Register Offsets *********************************************************************************/
#define LPC43_FREQ_MON_OFFSET 0x0014 /* Frequency monitor register */
#define LPC43_XTAL_OSC_CTRL_OFFSET 0x0018 /* Crystal oscillator control register */
#define LPC43_PLL0USB_STAT_OFFSET 0x001c /* PLL0USB status register */
#define LPC43_PLL0USB_CTRL_OFFSET 0x0020 /* PLL0USB control register */
#define LPC43_PLL0USB_MDIV_OFFSET 0x0024 /* PLL0USB M-divider register */
#define LPC43_PLL0USB_NP_DIV_OFFSET 0x0028 /* PLL0USB N/P-divider register */
#define LPC43_PLL0AUDIO_STAT_OFFSET 0x002c /* PLL0AUDIO status register */
#define LPC43_PLL0AUDIO_CTRL_OFFSET 0x0030 /* PLL0AUDIO control register */
#define LPC43_PLL0AUDIO_MDIV_OFFSET 0x0034 /* PLL0AUDIO M-divider */
#define LPC43_PLL0AUDIO_NP_DIV_OFFSET 0x0038 /* PLL0AUDIO N/P-divider */
#define LPC43_PLL0AUDIO_FRAC_OFFSET 0x003c /* PLL0AUDIO fractional */
#define LPC43_PLL1_STAT_OFFSET 0x0040 /* PLL1 status register */
#define LPC43_PLL1_CTRL_OFFSET 0x0044 /* PLL1 control register */
#define LPC43_IDIVA_CTRL_OFFSET 0x0048 /* Integer divider A control register */
#define LPC43_IDIVB_CTRL_OFFSET 0x004c /* Integer divider B control register */
#define LPC43_IDIVC_CTRL_OFFSET 0x0050 /* Integer divider C control register */
#define LPC43_IDIVD_CTRL_OFFSET 0x0054 /* Integer divider D control register */
#define LPC43_IDIVE_CTRL_OFFSET 0x0058 /* Integer divider E control register */
#define LPC43_BASE_SAFE_CLK_OFFSET 0x005c /* Output stage 0 control register (BASE_SAFE_CLK) */
#define LPC43_BASE_USB0_CLK_OFFSET 0x0060 /* Output stage 1 control register (BASE_USB0_CLK) */
#define LPC43_BASE_PERIPH_CLK_OFFSET 0x0064 /* Output stage 2 control register (BASE_PERIPH_CLK) */
#define LPC43_BASE_USB1_CLK_OFFSET 0x0068 /* Output stage 3 control register (BASE_USB1_CLK) */
#define LPC43_BASE_M4_CLK_OFFSET 0x006c /* Output stage 4 control register (BASE_M4_CLK) */
#define LPC43_BASE_SPIFI_CLK_OFFSET 0x0070 /* Output stage 5 control register (BASE_SPIFI_CLK) */
#define LPC43_BASE_SPI_CLK_OFFSET 0x0074 /* Output stage 6 control register (BASE_SPI_CLK) */
#define LPC43_BASE_PHYRX_CLK_OFFSET 0x0078 /* Output stage 7 control register (BASE_PHY_RX_CLK) */
#define LPC43_BASE_PHYTX_CLK_OFFSET 0x007c /* Output stage 8 control register (BASE_PHY_TX_CLK) */
#define LPC43_BASE_APB1_CLK_OFFSET 0x0080 /* Output stage 9 control register (BASE_APB1_CLK) */
#define LPC43_BASE_APB3_CLK_OFFSET 0x0084 /* Output stage 10 control register (BASE_APB3_CLK) */
#define LPC43_BASE_LCD_CLK_OFFSET 0x0088 /* Output stage 11 control register (BASE_LCD_CLK) */
#define LPC43_BASE_VADC_CLK_OFFSET 0x008c /* Output stage 12 control register (BASE_VADC_CLK) */
#define LPC43_BASE_SDIO_CLK_OFFSET 0x0090 /* Output stage 13 control register (BASE_SDIO_CLK) */
#define LPC43_BASE_SSP0_CLK_OFFSET 0x0094 /* Output stage 14 control register (BASE_SSP0_CLK) */
#define LPC43_BASE_SSP1_CLK_OFFSET 0x0098 /* Output stage 15 control register (BASE_SSP1_CLK) */
#define LPC43_BASE_USART0_CLK_OFFSET 0x009c /* Output stage 16 control register (BASE_USART0_CLK) */
#define LPC43_BASE_UART1_CLK_OFFSET 0x00a0 /* Output stage 17 control register (BASE_UART1_CLK) */
#define LPC43_BASE_USART2_CLK_OFFSET 0x00a4 /* Output stage 18 control register (BASE_USART2_CLK) */
#define LPC43_BASE_USART3_CLK_OFFSET 0x00a8 /* Output stage 19 control register (BASE_USART3_CLK) */
#define LPC43_BASE_OUT_CLK_OFFSET 0x00ac /* Output stage 20 control register (BASE_OUT_CLK) */
#define LPC43_BASE_APLL_CLK_OFFSET 0x00c0 /* Output stage 25 control register (BASE_APLL_CLK) */
#define LPC43_BASE_CGU_OUT0_CLK_OFFSET 0x00c4 /* Output stage 26 control register (BASE_CGU_OUT0_CLK) */
#define LPC43_BASE_CGU_OUT1_CLK_OFFSET 0x00c8 /* Output stage 27 control register (BASE_CGU_OUT1_CLK) */
/* Register Addresses *******************************************************************************/
#define LPC43_FREQ_MON (LPC43_CGU_BASE+LPC43_FREQ_MON_OFFSET)
#define LPC43_XTAL_OSC_CTRL (LPC43_CGU_BASE+LPC43_XTAL_OSC_CTRL_OFFSET)
#define LPC43_PLL0USB_STAT (LPC43_CGU_BASE+LPC43_PLL0USB_STAT_OFFSET)
#define LPC43_PLL0USB_CTRL (LPC43_CGU_BASE+LPC43_PLL0USB_CTRL_OFFSET)
#define LPC43_PLL0USB_MDIV (LPC43_CGU_BASE+LPC43_PLL0USB_MDIV_OFFSET)
#define LPC43_PLL0USB_NP_DIV (LPC43_CGU_BASE+LPC43_PLL0USB_NP_DIV_OFFSET)
#define LPC43_PLL0AUDIO_STAT (LPC43_CGU_BASE+LPC43_PLL0AUDIO_STAT_OFFSET)
#define LPC43_PLL0AUDIO_CTRL (LPC43_CGU_BASE+LPC43_PLL0AUDIO_CTRL_OFFSET)
#define LPC43_PLL0AUDIO_MDIV (LPC43_CGU_BASE+LPC43_PLL0AUDIO_MDIV_OFFSET)
#define LPC43_PLL0AUDIO_NP_DIV (LPC43_CGU_BASE+LPC43_PLL0AUDIO_NP_DIV_OFFSET)
#define LPC43_PLL0AUDIO_FRAC (LPC43_CGU_BASE+LPC43_PLL0AUDIO_FRAC_OFFSET)
#define LPC43_PLL1_STAT (LPC43_CGU_BASE+LPC43_PLL1_STAT_OFFSET)
#define LPC43_PLL1_CTRL (LPC43_CGU_BASE+LPC43_PLL1_CTRL_OFFSET)
#define LPC43_IDIVA_CTRL (LPC43_CGU_BASE+LPC43_IDIVA_CTRL_OFFSET)
#define LPC43_IDIVB_CTRL (LPC43_CGU_BASE+LPC43_IDIVB_CTRL_OFFSET)
#define LPC43_IDIVC_CTRL (LPC43_CGU_BASE+LPC43_IDIVC_CTRL_OFFSET)
#define LPC43_IDIVD_CTRL (LPC43_CGU_BASE+LPC43_IDIVD_CTRL_OFFSET)
#define LPC43_IDIVE_CTRL (LPC43_CGU_BASE+LPC43_IDIVE_CTRL_OFFSET)
#define LPC43_BASE_SAFE_CLK (LPC43_CGU_BASE+LPC43_BASE_SAFE_CLK_OFFSET)
#define LPC43_BASE_USB0_CLK (LPC43_CGU_BASE+LPC43_BASE_USB0_CLK_OFFSET)
#define LPC43_BASE_PERIPH_CLK (LPC43_CGU_BASE+LPC43_BASE_PERIPH_CLK_OFFSET)
#define LPC43_BASE_USB1_CLK (LPC43_CGU_BASE+LPC43_BASE_USB1_CLK_OFFSET)
#define LPC43_BASE_M4_CLK (LPC43_CGU_BASE+LPC43_BASE_M4_CLK_OFFSET)
#define LPC43_BASE_SPIFI_CLK (LPC43_CGU_BASE+LPC43_BASE_SPIFI_CLK_OFFSET)
#define LPC43_BASE_SPI_CLK (LPC43_CGU_BASE+LPC43_BASE_SPI_CLK_OFFSET)
#define LPC43_BASE_PHYRX_CLK (LPC43_CGU_BASE+LPC43_BASE_PHYRX_CLK_OFFSET)
#define LPC43_BASE_PHYTX_CLK (LPC43_CGU_BASE+LPC43_BASE_PHYTX_CLK_OFFSET)
#define LPC43_BASE_APB1_CLK (LPC43_CGU_BASE+LPC43_BASE_APB1_CLK_OFFSET)
#define LPC43_BASE_APB3_CLK (LPC43_CGU_BASE+LPC43_BASE_APB3_CLK_OFFSET)
#define LPC43_BASE_LCD_CLK (LPC43_CGU_BASE+LPC43_BASE_LCD_CLK_OFFSET)
#define LPC43_BASE_VADC_CLK (LPC43_CGU_BASE+LPC43_BASE_VADC_CLK_OFFSET)
#define LPC43_BASE_SDIO_CLK (LPC43_CGU_BASE+LPC43_BASE_SDIO_CLK_OFFSET)
#define LPC43_BASE_SSP0_CLK (LPC43_CGU_BASE+LPC43_BASE_SSP0_CLK_OFFSET)
#define LPC43_BASE_SSP1_CLK (LPC43_CGU_BASE+LPC43_BASE_SSP1_CLK_OFFSET)
#define LPC43_BASE_USART0_CLK (LPC43_CGU_BASE+LPC43_BASE_USART0_CLK_OFFSET)
#define LPC43_BASE_UART1_CLK (LPC43_CGU_BASE+LPC43_BASE_UART1_CLK_OFFSET)
#define LPC43_BASE_USART2_CLK (LPC43_CGU_BASE+LPC43_BASE_USART2_CLK_OFFSET)
#define LPC43_BASE_USART3_CLK (LPC43_CGU_BASE+LPC43_BASE_USART3_CLK_OFFSET)
#define LPC43_BASE_OUT_CLK (LPC43_CGU_BASE+LPC43_BASE_OUT_CLK_OFFSET)
#define LPC43_BASE_APLL_CLK (LPC43_CGU_BASE+LPC43_BASE_APLL_CLK_OFFSET)
#define LPC43_BASE_CGU_OUT0_CLK (LPC43_CGU_BASE+LPC43_BASE_CGU_OUT0_CLK_OFFSET)
#define LPC43_BASE_CGU_OUT1_CLK (LPC43_CGU_BASE+LPC43_BASE_CGU_OUT1_CLK_OFFSET)
/* Register Bit Definitions *************************************************************************/
/* Frequency monitor register */
#define FREQ_MON_RCNT_SHIFT (0) /* Bits 0-8: 9-bit reference clock-counter value */
#define FREQ_MON_RCNT_MASK (0x1ff << FREQ_MON_RCNT_SHIFT)
#define FREQ_MON_FCNT_SHIFT (9) /* Bits 9-22: 14-bit selected clock-counter value */
#define FREQ_MON_FCNT_MASK (0x3fff << FREQ_MON_FCNT_SHIFT)
#define FREQ_MON_MEAS (1 << 23) /* Bit 23: Measure frequency */
#define FREQ_MON_CLKSEL_SHIFT (24) /* Bits 24-28: Clock-source selection */
#define FREQ_MON_CLKSEL_MASK (31 << FREQ_MON_CLKSEL_SHIFT)
# define FREQ_MON_CLKSEL_32KHZOSC (0 << FREQ_MON_CLKSEL_SHIFT) /* 32 kHz oscillator (default) */
# define FREQ_MON_CLKSEL_IRQ (1 << FREQ_MON_CLKSEL_SHIFT) /* IRC */
# define FREQ_MON_CLKSEL_ENET_RXCLK (2 << FREQ_MON_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define FREQ_MON_CLKSEL_ENET_TXCLK (3 << FREQ_MON_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define FREQ_MON_CLKSEL_GPCLKIN (4 << FREQ_MON_CLKSEL_SHIFT) /* GP_CLKIN */
# define FREQ_MON_CLKSEL_XTAL (6 << FREQ_MON_CLKSEL_SHIFT) /* Crystal oscillator */
# define FREQ_MON_CLKSEL_PLL0USB (7 << FREQ_MON_CLKSEL_SHIFT) /* PLL0USB */
# define FREQ_MON_CLKSEL_PLL0AUDIO (8 << FREQ_MON_CLKSEL_SHIFT) /* PLL0AUDIO */
# define FREQ_MON_CLKSEL_PLL1 (9 << FREQ_MON_CLKSEL_SHIFT) /* PLL1 */
# define FREQ_MON_CLKSEL_IDIVA (12 << FREQ_MON_CLKSEL_SHIFT) /* IDIVA */
# define FREQ_MON_CLKSEL_IDIVB (13 << FREQ_MON_CLKSEL_SHIFT) /* IDIVB */
# define FREQ_MON_CLKSEL_IDIVC (14 << FREQ_MON_CLKSEL_SHIFT) /* IDIVC */
# define FREQ_MON_CLKSEL_IDIVD (15 << FREQ_MON_CLKSEL_SHIFT) /* IDIVD */
# define FREQ_MON_CLKSEL_IDIVE (16 << FREQ_MON_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Crystal oscillator control register */
#define XTAL_OSC_CTRL_ENABLE (1 << 0) /* Bit 0: Oscillator-pad enable */
#define XTAL_OSC_CTRL_BYPASS (1 << 1) /* Bit 1: Configure crystal or external-clock input */
#define XTAL_OSC_CTRL_HF (1 << 2) /* Bit 2: Select frequency range */
/* Bits 3-31: Reserved */
/* PLL0USB status register */
#define PLL0USB_STAT_LOCK (1 << 0) /* Bit 0: PLL0 lock indicator */
#define PLL0USB_STAT_FR (1 << 1) /* Bit 1: PLL0 free running indicator */
/* Bits 2-31: Reserved */
/* PLL0USB control register */
#define PLL0USB_CTRL_PD (1 << 0) /* Bit 0: PLL0 power down */
#define PLL0USB_CTRL_BYPASS (1 << 1) /* Bit 1: Input clock bypass control */
#define PLL0USB_CTRL_DIRECTI (1 << 2) /* Bit 2: PLL0 direct input */
#define PLL0USB_CTRL_DIRECTO (1 << 3) /* Bit 3: PLL0 direct output */
#define PLL0USB_CTRL_CLKEN (1 << 4) /* Bit 4: PLL0 clock enable */
/* Bit 5: Reserved */
#define PLL0USB_CTRL_FRM (1 << 6) /* Bit 6: Free running mode */
/* Bits 7-10: Reserved */
#define PLL0USB_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define PLL0USB_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define PLL0USB_CTRL_CLKSEL_MASK (31 << PLL0USB_CTRL_CLKSEL_SHIFT)
# define PLL0USB_CLKSEL_32KHZOSC (0 << PLL0USB_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define PLL0USB_CLKSEL_IRC (1 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define PLL0USB_CLKSEL_ENET_RXCLK (2 << PLL0USB_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define PLL0USB_CLKSEL_ENET_TXCLK (3 << PLL0USB_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define PLL0USB_CLKSEL_GPCLKIN (4 << PLL0USB_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define PLL0USB_CLKSEL_XTAL (6 << PLL0USB_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define PLL0USB_CLKSEL_PLL1 (9 << PLL0USB_CTRL_CLKSEL_SHIFT) /* PLL1 */
# define PLL0USB_CLKSEL_IDIVA (12 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IDIVA */
# define PLL0USB_CLKSEL_IDIVB (13 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IDIVB */
# define PLL0USB_CLKSEL_IDIVC (14 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IDIVC */
# define PLL0USB_CLKSEL_IDIVD (15 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IDIVD */
# define PLL0USB_CLKSEL_IDIVE (16 << PLL0USB_CTRL_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* PLL0USB M-divider register */
#define PLL0USB_MDIV_MDEC_SHIFT (0) /* Bits 0-16: Decoded M-divider coefficient value (1-131071) */
#define PLL0USB_MDIV_MDEC_MASK (0x1ffff << PLL0USB_MDIV_MDEC_SHIFT)
# define PLL0USB_MDIV_MDEC(n) ((n) << PLL0USB_MDIV_MDEC_SHIFT)
#define PLL0USB_MDIV_SELP_SHIFT (17) /* Bits 17-21: Bandwidth select P value */
#define PLL0USB_MDIV_SELP_MASK (0x1f << PLL0USB_MDIV_SELP_SHIFT)
# define PLL0USB_MDIV_SELP(n) ((n) << PLL0USB_MDIV_SELP_SHIFT)
#define PLL0USB_MDIV_SELI_SHIFT (22) /* Bits 22-27: Bandwidth select I value */
#define PLL0USB_MDIV_SELI_MASK (0x3f << PLL0USB_MDIV_SELI_SHIFT)
# define PLL0USB_MDIV_SELI(n) ((n) << PLL0USB_MDIV_SELI_SHIFT)
#define PLL0USB_MDIV_SELR_SHIFT (28) /* Bits 28-31: Bandwidth select R value */
#define PLL0USB_MDIV_SELR_MASK (15 << PLL0USB_MDIV_SELR_SHIFT)
# define PLL0USB_MDIV_SELR(n) ((n) << PLL0USB_MDIV_SELR_SHIFT)
/* PLL0USB N/P-divider register */
#define PLL0USB_NP_DIV_PDEC_SHIFT (0) /* Bits 0-6: Decoded P-divider coefficient value */
#define PLL0USB_NP_DIV_PDEC_MASK (0x7f << PLL0USB_NP_DIV_PDEC_SHIFT)
# define PLL0USB_NP_DIV_PDEC(n) ((n) << PLL0USB_NP_DIV_PDEC_SHIFT)
/* Bits 7-11: Reserved */
#define PLL0USB_NP_DIV_NDEC_SHIFT (12) /* Bits 12-21: Decoded N-divider coefficient value */
#define PLL0USB_NP_DIV_NDEC_MASK (0x3ff << PLL0USB_NP_DIV_NDEC_SHIFT)
# define PLL0USB_NP_DIV_NDEC(n) ((n) << PLL0USB_NP_DIV_NDEC_SHIFT)
/* Bits 22-31: Reserved */
/* PLL0AUDIO status register */
#define PLL0AUDIO_STAT_LOCK (1 << 0) /* Bit 0: PLL0 lock indicator */
#define PLL0AUDIO_STAT_FR (1 << 1) /* Bit 1: PLL0 free running indicator */
/* Bits 2-31: Reserved */
/* PLL0AUDIO control register */
#define PLL0AUDIO_CTRL_PD (1 << 0) /* Bit 0: PLL0 power down */
#define PLL0AUDIO_CTRL_BYPASS (1 << 1) /* Bit 1: Input clock bypass control */
#define PLL0AUDIO_CTRL_DIRECTI (1 << 2) /* Bit 2: PLL0 direct input */
#define PLL0AUDIO_CTRL_DIRECTO (1 << 3) /* Bit 3: PLL0 direct output */
#define PLL0AUDIO_CTRL_CLKEN (1 << 4) /* Bit 4: PLL0 clock enable */
/* Bit 5: Reserved */
#define PLL0AUDIO_CTRL_FRM (1 << 6) /* Bit 6: Free running mode */
/* Bits 7-10: Reserved */
#define PLL0AUDIO_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
#define PLL0AUDIO_CTRL_PLLFRACTREQ (1 << 12) /* Bit 12: Fractional PLL word write request */
#define PLL0AUDIO_CTRL_SELEXT (1 << 13) /* Bit 13: Select fractional divider */
#define PLL0AUDIO_CTRL_MODPD (1 << 14) /* Bit 14: Sigma-Delta modulator power-down */
/* Bits 15-23: Reserved */
#define PLL0AUDIO_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define PLL0AUDIO_CTRL_CLKSEL_MASK (31 << PLL0AUDIO_CTRL_CLKSEL_SHIFT)
# define PLL0AUDIO_CLKSEL_32KHZOSC (0 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define PLL0AUDIO_CLKSEL_IRC (1 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define PLL0AUDIO_CLKSEL_ENET_RXCLK (2 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define PLL0AUDIO_CLKSEL_ENET_TXCLK (3 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define PLL0AUDIO_CLKSEL_GPCLKIN (4 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define PLL0AUDIO_CLKSEL_XTAL (6 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define PLL0AUDIO_CLKSEL_PLL1 (9 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* PLL1 */
# define PLL0AUDIO_CLKSEL_IDIVA (12 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IDIVA */
# define PLL0AUDIO_CLKSEL_IDIVB (13 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IDIVB */
# define PLL0AUDIO_CLKSEL_IDIVC (14 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IDIVC */
# define PLL0AUDIO_CLKSEL_IDIVD (15 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IDIVD */
# define PLL0AUDIO_CLKSEL_IDIVE (16 << PLL0AUDIO_CTRL_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* PLL0AUDIO M-divider */
#define PLL0AUDIO_MDIV_MDEC_SHIFT (0) /* Bits 0-16: Decoded M-divider coefficient value (1-131071) */
#define PLL0AUDIO_MDIV_MDEC_MASK (0x1ffff << PLL0AUDIO_MDIV_MDEC_SHIFT)
# define PLL0AUDIO_MDIV_MDEC(n) ((n) << PLL0AUDIO_MDIV_MDEC_SHIFT)
/* Bits 17-31: Reserved */
/* PLL0AUDIO N/P-divider */
#define PLL0AUDIO_NP_DIV_PDEC_SHIFT (0) /* Bits 0-6: Decoded P-divider coefficient value */
#define PLL0AUDIO_NP_DIV_PDEC_MASK (0x7f << PLL0AUDIO_NP_DIV_PDEC_SHIFT)
# define PLL0AUDIO_NP_DIV_PDEC(n) ((n) << PLL0AUDIO_NP_DIV_PDEC_SHIFT)
/* Bits 7-11: Reserved */
#define PLL0AUDIO_NP_DIV_NDEC_SHIFT (12) /* Bits 12-21: Decoded N-divider coefficient value */
#define PLL0AUDIO_NP_DIV_NDEC_MASK (0x3ff << PLL0AUDIO_NP_DIV_NDEC_SHIFT)
# define PLL0AUDIO_NP_DIV_NDEC(n) ((n) << PLL0AUDIO_NP_DIV_NDEC_SHIFT)
/* Bits 22-31: Reserved */
/* PLL0AUDIO fractional */
#define PLL0AUDIO_FRAC_CTRL_SHIFT (0) /* Bits 0-21: Decoded P-divider coefficient value */
#define PLL0AUDIO_FRAC_CTRL_MASK (0x3fffff << PLL0AUDIO_FRAC_CTRL_SHIFT)
# define PLL0AUDIO_FRA_CCTRL(n) ((n) << PLL0AUDIO_FRAC_CTRL_SHIFT)
/* Bits 22-31: Reserved */
/* PLL1 status register */
#define PLL1_STAT_LOCK (1 << 0) /* Bit 0: PLL1 lock indicator */
/* Bits 1-31: Reserved */
/* PLL1 control register */
#define PLL1_CTRL_PD (1 << 0) /* Bit 0: PLL1 power down */
#define PLL1_CTRL_BYPASS (1 << 1) /* Bit 1: Input clock bypass control */
/* Bits 2-5: Reserved */
#define PLL1_CTRL_FBSEL (1 << 6) /* Bit 6: PLL1 feedback select */
#define PLL1_CTRL_DIRECT (1 << 7) /* Bit 7: PLL1 direct CCO output */
#define PLL1_CTRL_PSEL_SHIFT (8) /* Bits 8-9: Post-divider division ratio P */
#define PLL1_CTRL_PSEL_MASK (3 << PLL1_CTRL_PSEL_SHIFT)
# define PLL1_CTRL_PSEL_DIV1 (0 << PLL1_CTRL_PSEL_SHIFT)
# define PLL1_CTRL_PSEL_DIV2 (1 << PLL1_CTRL_PSEL_SHIFT)
# define PLL1_CTRL_PSEL_DIV4 (2 << PLL1_CTRL_PSEL_SHIFT)
# define PLL1_CTRL_PSEL_DIV8 (3 << PLL1_CTRL_PSEL_SHIFT)
/* Bit 10: Reserved */
#define PLL1_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
#define PLL1_CTRL_NSEL_SHIFT (12) /* Bits 12-13: Pre-divider division ratio N */
#define PLL1_CTRL_NSEL_MASK (3 << PLL1_CTRL_NSEL_SHIFT)
# define PLL1_CTRL_NSEL_DIV1 (0 << PLL1_CTRL_NSEL_SHIFT)
# define PLL1_CTRL_NSEL_DIV2 (1 << PLL1_CTRL_NSEL_SHIFT)
# define PLL1_CTRL_NSEL_DIV3 (2 << PLL1_CTRL_NSEL_SHIFT)
# define PLL1_CTRL_NSEL_DIV4 (3 << PLL1_CTRL_NSEL_SHIFT)
/* Bits 14-15: Reserved */
#define PLL1_CTRL_MSEL_SHIFT (16) /* Bits 16-23: Feedback-divider division ratio M */
#define PLL1_CTRL_MSEL_MASK (0xff << PLL1_CTRL_MSEL_SHIFT)
# define PLL1_CTRL_MSEL(n) (((n)-1) << PLL1_CTRL_MSEL_SHIFT) /* n=1..256 */
#define PLL1_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define PLL1_CTRL_CLKSEL_MASK (31 << PLL1_CTRL_CLKSEL_SHIFT)
# define PLL1_CLKSEL_32KHZOSC (0 << PLL1_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define PLL1_CLKSEL_IRC (1 << PLL1_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define PLL1_CLKSEL_ENET_RXCLK (2 << PLL1_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define PLL1_CLKSEL_ENET_TXCLK (3 << PLL1_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define PLL1_CLKSEL_GPCLKIN (4 << PLL1_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define PLL1_CLKSEL_XTAL (6 << PLL1_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define PLL1_CLKSEL_PLL0USB (7 << PLL1_CTRL_CLKSEL_SHIFT) /* PLL0USB */
# define PLL1_CLKSEL_PLL0AUDIO (8 << PLL1_CTRL_CLKSEL_SHIFT) /* PLL0AUDIO */
# define PLL1_CLKSEL_IDIVA (12 << PLL1_CTRL_CLKSEL_SHIFT) /* IDIVA */
# define PLL1_CLKSEL_IDIVB (13 << PLL1_CTRL_CLKSEL_SHIFT) /* IDIVB */
# define PLL1_CLKSEL_IDIVC (14 << PLL1_CTRL_CLKSEL_SHIFT) /* IDIVC */
# define PLL1_CLKSEL_IDIVD (15 << PLL1_CTRL_CLKSEL_SHIFT) /* IDIVD */
# define PLL1_CLKSEL_IDIVE (16 << PLL1_CTRL_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Integer divider A control register */
#define IDIVA_CTRL_PD (1 << 0) /* Bit 0: Integer divider A power down */
/* Bit 1: Reserved */
#define IDIVA_CTRL_IDIV_SHIFT (2) /* Bits 2-3: Integer divider A divider values (1/(IDIV + 1)) */
#define IDIVA_CTRL_IDIV_MASK (3 << IDIVA_CTRL_IDIV_SHIFT)
# define IDIVA_CTRL_IDIV(n) (((n)-1) << IDIVA_CTRL_IDIV_SHIFT) /* n=1..4 */
/* Bits 4-10: Reserved */
#define IDIVA_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define IDIVA_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define IDIVA_CTRL_CLKSEL_MASK (31 << IDIVA_CTRL_CLKSEL_SHIFT)
# define IDIVA_CLKSEL_32KHZOSC (0 << IDIVA_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define IDIVA_CLKSEL_IRC (1 << IDIVA_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define IDIVA_CLKSEL_ENET_RXCLK (2 << IDIVA_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define IDIVA_CLKSEL_ENET_TXCLK (3 << IDIVA_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define IDIVA_CLKSEL_GPCLKIN (4 << IDIVA_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define IDIVA_CLKSEL_XTAL (6 << IDIVA_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define IDIVA_CLKSEL_PLL0USB (7 << IDIVA_CTRL_CLKSEL_SHIFT) /* PLL0USB */
# define IDIVA_CLKSEL_PLL0AUDIO (8 << IDIVA_CTRL_CLKSEL_SHIFT) /* PLL0AUDIO */
# define IDIVA_CLKSEL_PLL1 (9 << IDIVA_CTRL_CLKSEL_SHIFT) /* PLL1 */
/* Bits 29-31: Reserved */
/* Integer divider B/C/D control register */
#define IDIVBCD_CTRL_PD (1 << 0) /* Bit 0: Integer divider power down */
/* Bit 1: Reserved */
#define IDIVBCD_CTRL_IDIV_SHIFT (2) /* Bits 2-5: Integer divider A divider values (1/(IDIV + 1)) */
#define IDIVBCD_CTRL_IDIV_MASK (15 << IDIVBCD_CTRL_IDIV_SHIFT)
# define IDIVBCD_CTRL_IDIV(n) (((n)-1) << IDIVBCD_CTRL_IDIV_SHIFT) /* n=1..16 */
/* Bits 6-10: Reserved */
#define IDIVBCD_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define IDIVBCD_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define IDIVBCD_CTRL_CLKSEL_MASK (31 << IDIVBCD_CTRL_CLKSEL_SHIFT)
# define IDIVBCD_CLKSEL_32KHZOSC (0 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define IDIVBCD_CLKSEL_IRC (1 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define IDIVBCD_CLKSEL_ENET_RXCLK (2 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define IDIVBCD_CLKSEL_ENET_TXCLK (3 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define IDIVBCD_CLKSEL_GPCLKIN (4 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define IDIVBCD_CLKSEL_XTAL (6 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define IDIVBCD_CLKSEL_PLL0AUDIO (8 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* PLL0AUDIO */
# define IDIVBCD_CLKSEL_PLL1 (9 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* PLL1 */
# define IDIVBCD_CLKSEL_IDIVA (12 << IDIVBCD_CTRL_CLKSEL_SHIFT) /* IDIVA */
/* Bits 29-31: Reserved */
/* Integer divider E control register */
#define IDIVE_CTRL_PD (1 << 0) /* Bit 0: Integer divider E power down */
/* Bit 1: Reserved */
#define IDIVE_CTRL_IDIV_SHIFT (2) /* Bits 2-9: Integer divider A divider values (1/(IDIV + 1)) */
#define IDIVE_CTRL_IDIV_MASK (0xff << IDIVE_CTRL_IDIV_SHIFT)
# define IDIVE_CTRL_IDIV(n) (((n)-1) << IDIVE_CTRL_IDIV_SHIFT) /* n=1..256 */
/* Bit 10: Reserved */
#define IDIVE_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define IDIVE_CTRL_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define IDIVE_CTRL_CLKSEL_MASK (31 << IDIVE_CTRL_CLKSEL_SHIFT)
# define IDIVE_CLKSEL_32KHZOSC (0 << IDIVE_CTRL_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define IDIVE_CLKSEL_IRC (1 << IDIVE_CTRL_CLKSEL_SHIFT) /* IRC (default) */
# define IDIVE_CLKSEL_ENET_RXCLK (2 << IDIVE_CTRL_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define IDIVE_CLKSEL_ENET_TXCLK (3 << IDIVE_CTRL_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define IDIVE_CLKSEL_GPCLKIN (4 << IDIVE_CTRL_CLKSEL_SHIFT) /* GP_CLKIN */
# define IDIVE_CLKSEL_XTAL (6 << IDIVE_CTRL_CLKSEL_SHIFT) /* Crystal oscillator */
# define IDIVE_CLKSEL_PLL0AUDIO (8 << IDIVE_CTRL_CLKSEL_SHIFT) /* PLL0AUDIO */
# define IDIVE_CLKSEL_PLL1 (9 << IDIVE_CTRL_CLKSEL_SHIFT) /* PLL1 */
# define IDIVE_CLKSEL_IDIVA (12 << IDIVE_CTRL_CLKSEL_SHIFT) /* IDIVA */
/* Bits 29-31: Reserved */
/* Output stage 0 control register (BASE_SAFE_CLK) */
#define BASE_SAFE_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_SAFE_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_SAFE_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_SAFE_CLK_CLKSEL_MASK (31 << BASE_SAFE_CLK_CLKSEL_SHIFT)
# define BASE_SAFE_CLKSEL_IRC (1 << BASE_SAFE_CLK_CLKSEL_SHIFT) /* IRC (default) */
/* Bits 29-31: Reserved */
/* Output stage 1 control register (BASE_USB0_CLK) */
#define BASE_USB0_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_USB0_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_USB0_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_USB0_CLK_CLKSEL_MASK (31 << BASE_USB0_CLK_CLKSEL_SHIFT)
# define BASE_USB0_CLKSEL_PLL0USB (7 << BASE_USB0_CLK_CLKSEL_SHIFT) /* PLL0USB (default) */
/* Bits 29-31: Reserved */
/* Output stage 2 control register (BASE_PERIPH_CLK) */
#define BASE_PERIPH_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_PERIPH_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_PERIPH_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_PERIPH_CLK_CLKSEL_MASK (31 << BASE_PERIPH_CLK_CLKSEL_SHIFT)
# define BASE_PERIPH_CLKSEL_32KHZOSC (0 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_PERIPH_CLKSEL_IRC (1 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_PERIPH_CLKSEL_ENET_RXCLK (2 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_PERIPH_CLKSEL_ENET_TXCLK (3 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_PERIPH_CLKSEL_GPCLKIN (4 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_PERIPH_CLKSEL_XTAL (6 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_PERIPH_CLKSEL_PLL0AUDIO (8 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_PERIPH_CLKSEL_PLL1 (9 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_PERIPH_CLKSEL_IDIVA (12 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_PERIPH_CLKSEL_IDIVB (13 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_PERIPH_CLKSEL_IDIVC (14 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_PERIPH_CLKSEL_IDIVD (15 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_PERIPH_CLKSEL_IDIVE (16 << BASE_PERIPH_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 3 control register (BASE_USB1_CLK) */
#define BASE_USB1_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_USB1_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_USB1_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_USB1_CLK_CLKSEL_MASK (31 << BASE_USB1_CLK_CLKSEL_SHIFT)
# define BASE_USB1_CLKSEL_32KHZOSC (0 << BASE_USB1_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_USB1_CLKSEL_IRC (1 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_USB1_CLKSEL_ENET_RXCLK (2 << BASE_USB1_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_USB1_CLKSEL_ENET_TXCLK (3 << BASE_USB1_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_USB1_CLKSEL_GPCLKIN (4 << BASE_USB1_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_USB1_CLKSEL_XTAL (6 << BASE_USB1_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_USB1_CLKSEL_PLL0USB (7 << BASE_USB1_CLK_CLKSEL_SHIFT) /* PLL0USB */
# define BASE_USB1_CLKSEL_PLL0AUDIO (8 << BASE_USB1_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_USB1_CLKSEL_PLL1 (9 << BASE_USB1_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_USB1_CLKSEL_IDIVA (12 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_USB1_CLKSEL_IDIVB (13 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_USB1_CLKSEL_IDIVC (14 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_USB1_CLKSEL_IDIVD (15 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_USB1_CLKSEL_IDIVE (16 << BASE_USB1_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 4 control register (BASE_M4_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_M4_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_M4_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_M4_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_M4_CLK_CLKSEL_MASK (31 << BASE_M4_CLK_CLKSEL_SHIFT)
# define BASE_M4_CLKSEL_32KHZOSC (0 << BASE_M4_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_M4_CLKSEL_IRC (1 << BASE_M4_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_M4_CLKSEL_ENET_RXCLK (2 << BASE_M4_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_M4_CLKSEL_ENET_TXCLK (3 << BASE_M4_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_M4_CLKSEL_GPCLKIN (4 << BASE_M4_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_M4_CLKSEL_XTAL (6 << BASE_M4_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_M4_CLKSEL_PLL0AUDIO (8 << BASE_M4_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_M4_CLKSEL_PLL1 (9 << BASE_M4_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_M4_CLKSEL_IDIVA (12 << BASE_M4_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_M4_CLKSEL_IDIVB (13 << BASE_M4_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_M4_CLKSEL_IDIVC (14 << BASE_M4_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_M4_CLKSEL_IDIVD (15 << BASE_M4_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_M4_CLKSEL_IDIVE (16 << BASE_M4_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 5 control register (BASE_SPIFI_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_SPIFI_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_SPIFI_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_SPIFI_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_SPIFI_CLK_CLKSEL_MASK (31 << BASE_SPIFI_CLK_CLKSEL_SHIFT)
# define BASE_SPIFI_CLKSEL_32KHZOSC (0 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_SPIFI_CLKSEL_IRC (1 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_SPIFI_CLKSEL_ENET_RXCLK (2 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_SPIFI_CLKSEL_ENET_TXCLK (3 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_SPIFI_CLKSEL_GPCLKIN (4 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_SPIFI_CLKSEL_XTAL (6 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_SPIFI_CLKSEL_PLL0AUDIO (8 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_SPIFI_CLKSEL_PLL1 (9 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_SPIFI_CLKSEL_IDIVA (12 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_SPIFI_CLKSEL_IDIVB (13 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_SPIFI_CLKSEL_IDIVC (14 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_SPIFI_CLKSEL_IDIVD (15 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_SPIFI_CLKSEL_IDIVE (16 << BASE_SPIFI_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 6 control register (BASE_SPI_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_SPI_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_SPI_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_SPI_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_SPI_CLK_CLKSEL_MASK (31 << BASE_SPI_CLK_CLKSEL_SHIFT)
# define BASE_SPI_CLKSEL_32KHZOSC (0 << BASE_SPI_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_SPI_CLKSEL_IRC (1 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_SPI_CLKSEL_ENET_RXCLK (2 << BASE_SPI_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_SPI_CLKSEL_ENET_TXCLK (3 << BASE_SPI_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_SPI_CLKSEL_GPCLKIN (4 << BASE_SPI_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_SPI_CLKSEL_XTAL (6 << BASE_SPI_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_SPI_CLKSEL_PLL0AUDIO (8 << BASE_SPI_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_SPI_CLKSEL_PLL1 (9 << BASE_SPI_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_SPI_CLKSEL_IDIVA (12 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_SPI_CLKSEL_IDIVB (13 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_SPI_CLKSEL_IDIVC (14 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_SPI_CLKSEL_IDIVD (15 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_SPI_CLKSEL_IDIVE (16 << BASE_SPI_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 7 control register (BASE_PHY_RX_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_PHYRX_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_PHYRX_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_PHYRX_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_PHYRX_CLK_CLKSEL_MASK (31 << BASE_PHYRX_CLK_CLKSEL_SHIFT)
# define BASE_PHYRX_CLKSEL_32KHZOSC (0 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_PHYRX_CLKSEL_IRC (1 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_PHYRX_CLKSEL_ENET_RXCLK (2 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_PHYRX_CLKSEL_ENET_TXCLK (3 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_PHYRX_CLKSEL_GPCLKIN (4 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_PHYRX_CLKSEL_XTAL (6 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_PHYRX_CLKSEL_PLL0AUDIO (8 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_PHYRX_CLKSEL_PLL1 (9 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_PHYRX_CLKSEL_IDIVA (12 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_PHYRX_CLKSEL_IDIVB (13 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_PHYRX_CLKSEL_IDIVC (14 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_PHYRX_CLKSEL_IDIVD (15 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_PHYRX_CLKSEL_IDIVE (16 << BASE_PHYRX_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 8 control register (BASE_PHY_TX_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_PHYTX_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_PHYTX_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_PHYTX_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_PHYTX_CLK_CLKSEL_MASK (31 << BASE_PHYTX_CLK_CLKSEL_SHIFT)
# define BASE_PHYTX_CLKSEL_32KHZOSC (0 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_PHYTX_CLKSEL_IRC (1 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_PHYTX_CLKSEL_ENET_RXCLK (2 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_PHYTX_CLKSEL_ENET_TXCLK (3 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_PHYTX_CLKSEL_GPCLKIN (4 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_PHYTX_CLKSEL_XTAL (6 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_PHYTX_CLKSEL_PLL0AUDIO (8 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_PHYTX_CLKSEL_PLL1 (9 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_PHYTX_CLKSEL_IDIVA (12 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_PHYTX_CLKSEL_IDIVB (13 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_PHYTX_CLKSEL_IDIVC (14 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_PHYTX_CLKSEL_IDIVD (15 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_PHYTX_CLKSEL_IDIVE (16 << BASE_PHYTX_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 9 control register (BASE_APB1_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_APB1_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_APB1_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_APB1_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_APB1_CLK_CLKSEL_MASK (31 << BASE_APB1_CLK_CLKSEL_SHIFT)
# define BASE_APB1_CLKSEL_32KHZOSC (0 << BASE_APB1_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_APB1_CLKSEL_IRC (1 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_APB1_CLKSEL_ENET_RXCLK (2 << BASE_APB1_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_APB1_CLKSEL_ENET_TXCLK (3 << BASE_APB1_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_APB1_CLKSEL_GPCLKIN (4 << BASE_APB1_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_APB1_CLKSEL_XTAL (6 << BASE_APB1_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_APB1_CLKSEL_PLL0AUDIO (8 << BASE_APB1_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_APB1_CLKSEL_PLL1 (9 << BASE_APB1_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_APB1_CLKSEL_IDIVA (12 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_APB1_CLKSEL_IDIVB (13 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_APB1_CLKSEL_IDIVC (14 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_APB1_CLKSEL_IDIVD (15 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_APB1_CLKSEL_IDIVE (16 << BASE_APB1_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 11 control register (BASE_LCD_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_LCD_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_LCD_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_LCD_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_LCD_CLK_CLKSEL_MASK (31 << BASE_LCD_CLK_CLKSEL_SHIFT)
# define BASE_LCD_CLKSEL_32KHZOSC (0 << BASE_LCD_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_LCD_CLKSEL_IRC (1 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_LCD_CLKSEL_ENET_RXCLK (2 << BASE_LCD_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_LCD_CLKSEL_ENET_TXCLK (3 << BASE_LCD_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_LCD_CLKSEL_GPCLKIN (4 << BASE_LCD_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_LCD_CLKSEL_XTAL (6 << BASE_LCD_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_LCD_CLKSEL_PLL0AUDIO (8 << BASE_LCD_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_LCD_CLKSEL_PLL1 (9 << BASE_LCD_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_LCD_CLKSEL_IDIVA (12 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_LCD_CLKSEL_IDIVB (13 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_LCD_CLKSEL_IDIVC (14 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_LCD_CLKSEL_IDIVD (15 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_LCD_CLKSEL_IDIVE (16 << BASE_LCD_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 12 control register (BASE_VADC_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_VADC_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_VADC_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_VADC_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_VADC_CLK_CLKSEL_MASK (31 << BASE_VADC_CLK_CLKSEL_SHIFT)
# define BASE_VADC_CLKSEL_32KHZOSC (0 << BASE_VADC_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_VADC_CLKSEL_IRC (1 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_VADC_CLKSEL_ENET_RXCLK (2 << BASE_VADC_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_VADC_CLKSEL_ENET_TXCLK (3 << BASE_VADC_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_VADC_CLKSEL_GPCLKIN (4 << BASE_VADC_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_VADC_CLKSEL_XTAL (6 << BASE_VADC_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_VADC_CLKSEL_PLL0AUDIO (8 << BASE_VADC_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_VADC_CLKSEL_PLL1 (9 << BASE_VADC_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_VADC_CLKSEL_IDIVA (12 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_VADC_CLKSEL_IDIVB (13 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_VADC_CLKSEL_IDIVC (14 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_VADC_CLKSEL_IDIVD (15 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_VADC_CLKSEL_IDIVE (16 << BASE_VADC_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 14 control register (BASE_SSP0_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_SSP0_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_SSP0_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_SSP0_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_SSP0_CLK_CLKSEL_MASK (31 << BASE_SSP0_CLK_CLKSEL_SHIFT)
# define BASE_SSP0_CLKSEL_32KHZOSC (0 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_SSP0_CLKSEL_IRC (1 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_SSP0_CLKSEL_ENET_RXCLK (2 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_SSP0_CLKSEL_ENET_TXCLK (3 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_SSP0_CLKSEL_GPCLKIN (4 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_SSP0_CLKSEL_XTAL (6 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_SSP0_CLKSEL_PLL0AUDIO (8 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_SSP0_CLKSEL_PLL1 (9 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_SSP0_CLKSEL_IDIVA (12 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_SSP0_CLKSEL_IDIVB (13 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_SSP0_CLKSEL_IDIVC (14 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_SSP0_CLKSEL_IDIVD (15 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_SSP0_CLKSEL_IDIVE (16 << BASE_SSP0_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 15 control register (BASE_SSP1_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_SSP1_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_SSP1_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_SSP1_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_SSP1_CLK_CLKSEL_MASK (31 << BASE_SSP1_CLK_CLKSEL_SHIFT)
# define BASE_SSP1_CLKSEL_32KHZOSC (0 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_SSP1_CLKSEL_IRC (1 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_SSP1_CLKSEL_ENET_RXCLK (2 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_SSP1_CLKSEL_ENET_TXCLK (3 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_SSP1_CLKSEL_GPCLKIN (4 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_SSP1_CLKSEL_XTAL (6 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_SSP1_CLKSEL_PLL0AUDIO (8 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_SSP1_CLKSEL_PLL1 (9 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_SSP1_CLKSEL_IDIVA (12 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_SSP1_CLKSEL_IDIVB (13 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_SSP1_CLKSEL_IDIVC (14 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_SSP1_CLKSEL_IDIVD (15 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_SSP1_CLKSEL_IDIVE (16 << BASE_SSP1_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 16 control register (BASE_USART0_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_USART0_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_USART0_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_USART0_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_USART0_CLK_CLKSEL_MASK (31 << BASE_USART0_CLK_CLKSEL_SHIFT)
# define BASE_USART0_CLKSEL_32KHZOSC (0 << BASE_USART0_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_USART0_CLKSEL_IRC (1 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_USART0_CLKSEL_ENET_RXCLK (2 << BASE_USART0_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_USART0_CLKSEL_ENET_TXCLK (3 << BASE_USART0_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_USART0_CLKSEL_GPCLKIN (4 << BASE_USART0_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_USART0_CLKSEL_XTAL (6 << BASE_USART0_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_USART0_CLKSEL_PLL0AUDIO (8 << BASE_USART0_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_USART0_CLKSEL_PLL1 (9 << BASE_USART0_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_USART0_CLKSEL_IDIVA (12 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_USART0_CLKSEL_IDIVB (13 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_USART0_CLKSEL_IDIVC (14 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_USART0_CLKSEL_IDIVD (15 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_USART0_CLKSEL_IDIVE (16 << BASE_USART0_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 17 control register (BASE_UART1_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_UART1_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_UART1_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_UART1_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_UART1_CLK_CLKSEL_MASK (31 << BASE_UART1_CLK_CLKSEL_SHIFT)
# define BASE_UART1_CLKSEL_32KHZOSC (0 << BASE_UART1_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_UART1_CLKSEL_IRC (1 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_UART1_CLKSEL_ENET_RXCLK (2 << BASE_UART1_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_UART1_CLKSEL_ENET_TXCLK (3 << BASE_UART1_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_UART1_CLKSEL_GPCLKIN (4 << BASE_UART1_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_UART1_CLKSEL_XTAL (6 << BASE_UART1_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_UART1_CLKSEL_PLL0AUDIO (8 << BASE_UART1_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_UART1_CLKSEL_PLL1 (9 << BASE_UART1_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_UART1_CLKSEL_IDIVA (12 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_UART1_CLKSEL_IDIVB (13 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_UART1_CLKSEL_IDIVC (14 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_UART1_CLKSEL_IDIVD (15 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_UART1_CLKSEL_IDIVE (16 << BASE_UART1_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 18 control register (BASE_USART2_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_USART2_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_USART2_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_USART2_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_USART2_CLK_CLKSEL_MASK (31 << BASE_USART2_CLK_CLKSEL_SHIFT)
# define BASE_USART2_CLKSEL_32KHZOSC (0 << BASE_USART2_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_USART2_CLKSEL_IRC (1 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_USART2_CLKSEL_ENET_RXCLK (2 << BASE_USART2_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_USART2_CLKSEL_ENET_TXCLK (3 << BASE_USART2_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_USART2_CLKSEL_GPCLKIN (4 << BASE_USART2_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_USART2_CLKSEL_XTAL (6 << BASE_USART2_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_USART2_CLKSEL_PLL0AUDIO (8 << BASE_USART2_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_USART2_CLKSEL_PLL1 (9 << BASE_USART2_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_USART2_CLKSEL_IDIVA (12 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_USART2_CLKSEL_IDIVB (13 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_USART2_CLKSEL_IDIVC (14 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_USART2_CLKSEL_IDIVD (15 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_USART2_CLKSEL_IDIVE (16 << BASE_USART2_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 19 control register (BASE_USART3_CLK) */
/* NOTE: Clocks 4-19 are identical */
#define BASE_USART3_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_USART3_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_USART3_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_USART3_CLK_CLKSEL_MASK (31 << BASE_USART3_CLK_CLKSEL_SHIFT)
# define BASE_USART3_CLKSEL_32KHZOSC (0 << BASE_USART3_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_USART3_CLKSEL_IRC (1 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_USART3_CLKSEL_ENET_RXCLK (2 << BASE_USART3_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_USART3_CLKSEL_ENET_TXCLK (3 << BASE_USART3_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_USART3_CLKSEL_GPCLKIN (4 << BASE_USART3_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_USART3_CLKSEL_XTAL (6 << BASE_USART3_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_USART3_CLKSEL_PLL0AUDIO (8 << BASE_USART3_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_USART3_CLKSEL_PLL1 (9 << BASE_USART3_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_USART3_CLKSEL_IDIVA (12 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_USART3_CLKSEL_IDIVB (13 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_USART3_CLKSEL_IDIVC (14 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_USART3_CLKSEL_IDIVD (15 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_USART3_CLKSEL_IDIVE (16 << BASE_USART3_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 20 control register (BASE_OUT_CLK) */
#define BASE_OUT_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_OUT_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_OUT_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_OUT_CLK_CLKSEL_MASK (31 << BASE_OUT_CLK_CLKSEL_SHIFT)
# define BASE_OUT_CLKSEL_32KHZOSC (0 << BASE_OUT_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_OUT_CLKSEL_IRC (1 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_OUT_CLKSEL_ENET_RXCLK (2 << BASE_OUT_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_OUT_CLKSEL_ENET_TXCLK (3 << BASE_OUT_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_OUT_CLKSEL_GPCLKIN (4 << BASE_OUT_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_OUT_CLKSEL_XTAL (6 << BASE_OUT_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_OUT_CLKSEL_PLL0USB (7 << BASE_OUT_CLK_CLKSEL_SHIFT) /* PLL0USB */
# define BASE_OUT_CLKSEL_PLL0AUDIO (8 << BASE_OUT_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_OUT_CLKSEL_PLL1 (9 << BASE_OUT_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_OUT_CLKSEL_IDIVA (12 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_OUT_CLKSEL_IDIVB (13 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_OUT_CLKSEL_IDIVC (14 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_OUT_CLKSEL_IDIVD (15 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_OUT_CLKSEL_IDIVE (16 << BASE_OUT_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 25 control register (BASE_APLL_CLK) */
#define BASE_APLL_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_APLL_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_APLL_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_APLL_CLK_CLKSEL_MASK (31 << BASE_APLL_CLK_CLKSEL_SHIFT)
# define BASE_APLL_CLKSEL_32KHZOSC (0 << BASE_APLL_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_APLL_CLKSEL_IRC (1 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_APLL_CLKSEL_ENET_RXCLK (2 << BASE_APLL_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_APLL_CLKSEL_ENET_TXCLK (3 << BASE_APLL_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_APLL_CLKSEL_GPCLKIN (4 << BASE_APLL_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_APLL_CLKSEL_XTAL (6 << BASE_APLL_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_APLL_CLKSEL_PLL0AUDIO (8 << BASE_APLL_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_APLL_CLKSEL_PLL1 (9 << BASE_APLL_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_APLL_CLKSEL_IDIVA (12 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_APLL_CLKSEL_IDIVB (13 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_APLL_CLKSEL_IDIVC (14 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_APLL_CLKSEL_IDIVD (15 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_APLL_CLKSEL_IDIVE (16 << BASE_APLL_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/* Output stage 26/27 control register (BASE_CGU_OUT0/1_CLK) */
/* NOTE: Clocks 26-27 are identical */
#define BASE_CGU_CLK_PD (1 << 0) /* Bit 0: Output stage power down */
/* Bits 1-10: Reserved */
#define BASE_CGU_CLK_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */
/* Bits 12-23: Reserved */
#define BASE_CGU_CLK_CLKSEL_SHIFT (24) /* Bits 24-28: Clock source selection */
#define BASE_CGU_CLK_CLKSEL_MASK (31 << BASE_CGU_CLK_CLKSEL_SHIFT)
# define BASE_CGU_CLKSEL_32KHZOSC (0 << BASE_CGU_CLK_CLKSEL_SHIFT) /* 32 kHz oscillator */
# define BASE_CGU_CLKSEL_IRC (1 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IRC (default) */
# define BASE_CGU_CLKSEL_ENET_RXCLK (2 << BASE_CGU_CLK_CLKSEL_SHIFT) /* ENET_RX_CLK */
# define BASE_CGU_CLKSEL_ENET_TXCLK (3 << BASE_CGU_CLK_CLKSEL_SHIFT) /* ENET_TX_CLK */
# define BASE_CGU_CLKSEL_GPCLKIN (4 << BASE_CGU_CLK_CLKSEL_SHIFT) /* GP_CLKIN */
# define BASE_CGU_CLKSEL_XTAL (6 << BASE_CGU_CLK_CLKSEL_SHIFT) /* Crystal oscillator */
# define BASE_CGU_CLKSEL_PLL0USB (7 << BASE_CGU_CLK_CLKSEL_SHIFT) /* PLL0USB */
# define BASE_CGU_CLKSEL_PLL0AUDIO (8 << BASE_CGU_CLK_CLKSEL_SHIFT) /* PLL0AUDIO */
# define BASE_CGU_CLKSEL_PLL1 (9 << BASE_CGU_CLK_CLKSEL_SHIFT) /* PLL1 */
# define BASE_CGU_CLKSEL_IDIVA (12 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IDIVA */
# define BASE_CGU_CLKSEL_IDIVB (13 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IDIVB */
# define BASE_CGU_CLKSEL_IDIVC (14 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IDIVC */
# define BASE_CGU_CLKSEL_IDIVD (15 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IDIVD */
# define BASE_CGU_CLKSEL_IDIVE (16 << BASE_CGU_CLK_CLKSEL_SHIFT) /* IDIVE */
/* Bits 29-31: Reserved */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public Data
****************************************************************************************************/
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CGU_H */
|