/************************************************************************************
* arch/arm/src/lpc43xx/lpc43_gpioint.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/* GPIO pin interrupts
*
* From all available GPIO pins, up to eight pins can be selected in the system
* control block to serve as external interrupt pins. The external interrupt pins
* are connected to eight individual interrupts in the NVIC and are created based
* on rising or falling edges or on the input level on the pin.
*
* GPIO group interrupt
*
* For each port/pin connected to one of the two the GPIO Grouped Interrupt blocks
* (GROUP0 and GROUP1), the GPIO grouped interrupt registers determine which pins are
* enabled to generate interrupts and what the active polarities of each of those
* inputs are. The GPIO grouped interrupt registers also select whether the interrupt
* output will be level or edge triggered and whether it will be based on the OR or
* the AND of all of the enabled inputs.
*/
#ifndef __ARCH_ARM_SRC_LPC43XX_LPC43_GPIOINT_H
#define __ARCH_ARM_SRC_LPC43XX_LPC43_GPIOINT_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
#include "chip/lpc43_gpio.h"
#ifdef CONFIG_GPIO_IRQ
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc43_gpioint_initialize
*
* Description:
* Initialize logic to interrupting GPIO pins GPIO pins
*
************************************************************************************/
EXTERN void lpc43_gpioint_initialize(void);
/****************************************************************************
* Name: lpc43_gpioint_config
*
* Description:
* Configure a GPIO pin as an interrupt source (after it has been
* configured as an input).
*
* Returned Value:
* None
*
****************************************************************************/
EXTERN int lpc43_gpioint_config(uint16_t gpiocfg);
/****************************************************************************
* Name: lpc43_gpiointconfig
*
* Description:
* Un-configure a GPIO pin as an interrupt source.
*
* Returned Value:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
EXTERN int lpc43_gpioint_unconfig(uint16_t gpiocfg);
/************************************************************************************
* Name: lpc43_gpioint_enable
*
* Description:
* Zero on success; a negated errno value on failure.
*
************************************************************************************/
EXTERN int lpc43_gpioint_enable(int irq);
/************************************************************************************
* Name: lpc43_gpioint_disable
*
* Description:
* Disable the interrupt for specified GPIO IRQ
*
************************************************************************************/
EXTERN void lpc43_gpioint_disable(int irq);
#endif /* CONFIG_GPIO_IRQ */
#endif /* __ARCH_ARM_SRC_LPC43XX_LPC43_GPIOINT_H */