/************************************************************************************
* arch/arm/src/lpc43xx/lpc43_ssp.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC43XX_SSP_H
#define __ARCH_ARM_SRC_LPC43XX_SSP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi.h>
#include "chip/lpc43_ssp.h"
#if defined(CONFIG_LPC43_SSP0) || defined(CONFIG_LPC43_SSP1)
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* This header file defines interfaces to common SSP logic. To use this common SSP
* logic on your board:
*
* 1. Provide logic in lpc43_boardinitialize() to configure SSP chip select pins.
* 2. Provide lpc43_ssp0/1select() and lpc43_ssp0/1status() functions in your
* board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 3. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* lpc43_ssp0/1cmddata() functions in your board-specific logic. These
* functions will perform cmd/data selection operations using GPIOs in the
* way your board is configured.
* 4. Your low level board initialization logic should call lpc43_sspinitialize.
* 5. The handle returned by lpc43_sspinitialize() may then be used to bind the
* SSP driver to higher level logic (e.g., calling mmcsd_spislotinitialize(),
* for example, will bind the SPI driver to the SPI MMC/SD driver).
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/****************************************************************************
* Name: lpc43_sspinitialize
*
* Description:
* Initialize the selected SSP port (0=SSP0, 1=SSP1)
*
* Input Parameter:
* port - Port number (0=SSP0, 1=SSP1)
*
* Returned Value:
* Valid SPI device structure reference on succcess; a NULL on failure
*
****************************************************************************/
FAR struct spi_dev_s *lpc43_sspinitialize(int port)
/************************************************************************************
* Name: lpc43_ssp0/1select, lpc43_ssp0/1status, and lpc43_ssp0/1cmddata
*
* Description:
* These functions must be provided in your board-specific logic. The
* lpc43_ssp0/1select functions will perform chip selection and the
* lpc43_ssp0/1status will perform status operations using GPIOs in the way your
* board is configured.
*
* If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, then
* lpc43_ssp0/1cmddata must also be provided. This functions performs cmd/data
* selection operations using GPIOs in the way your board is configured.
*
************************************************************************************/
#ifdef CONFIG_LPC43_SSP0
EXTERN void lpc43_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t lpc43_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
EXTERN int lpc43_ssp0cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_LPC43_SSP1
EXTERN void lpc43_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t lpc43_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
EXTERN int lpc43_ssp1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
/****************************************************************************
* Name: spi_flush
*
* Description:
* Flush and discard any words left in the RX fifo. This can be called
* from ssp0/1select after a device is deselected (if you worry about such
* things).
*
* Input Parameters:
* dev - Device-specific state data
*
* Returned Value:
* None
*
****************************************************************************/
#if defined(CONFIG_LPC43_SSP0) || defined(CONFIG_LPC43_SSP1)
EXTERN void ssp_flush(FAR struct spi_dev_s *dev);
#endif
/****************************************************************************
* Name: lpc43_spi/ssp0/1register
*
* Description:
* If the board supports a card detect callback to inform the SPI-based
* MMC/SD drvier when an SD card is inserted or removed, then
* CONFIG_SPI_CALLBACK should be defined and the following function(s) must
* must be implemented. These functiosn implements the registercallback
* method of the SPI interface (see include/nuttx/spi.h for details)
*
* Input Parameters:
* dev - Device-specific state data
* callback - The funtion to call on the media change
* arg - A caller provided value to return with the callback
*
* Returned Value:
* 0 on success; negated errno on failure.
*
****************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
#ifdef CONFIG_LPC43_SSP0
EXTERN int lpc43_ssp0register(FAR struct spi_dev_s *dev,
spi_mediachange_t callback, void *arg);
#endif
#ifdef CONFIG_LPC43_SSP1
EXTERN int lpc43_ssp1register(FAR struct spi_dev_s *dev,
spi_mediachange_t callback, void *arg);
#endif
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_LPC43_SSP0/1 */
#endif /* __ARCH_ARM_SRC_LPC43XX_SSP_H */
