|
|
/****************************************************************************
* arch/arm/src/nuc1xx/nuc_start.c
* arch/arm/src/chip/nuc_start.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/init.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "nuc_config.h"
#include "nuc_lowputc.h"
#include "nuc_clockconfig.h"
#include "nuc_userspace.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Memory Map:
*
* 0x0000:0000 - Beginning of FLASH. Address of exception vectors.
* 0x0001:ffff - End of flash (assuming 128KB of FLASH)
* 0x2000:0000 - Start of SRAM and start of .data (_sdata)
* - End of .data (_edata) abd start of .bss (_sbss)
* - End of .bss (_ebss) and bottom of idle stack
* - _ebss + CONFIG_IDLETHREAD_STACKSIZE = end of idle stack,
* start of heap
* 0x2000:3fff - End of SRAM and end of heap (assuming 16KB of SRAM)
*/
#define IDLE_STACK ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE-4)
#define HEAP_BASE ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE)
/****************************************************************************
* Public Data
****************************************************************************/
const uint32_t g_idle_topstack = IDLE_STACK;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: showprogress
*
* Description:
* Print a character on the UART to show boot status.
*
****************************************************************************/
#if defined(CONFIG_DEBUG) && defined(HAVE_SERIAL_CONSOLE)
# define showprogress(c) nuc_lowputc((uint32_t)c)
#else
# define showprogress(c)
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: _start
*
* Description:
* This is the reset entry point.
*
****************************************************************************/
void __start(void)
{
const uint32_t *src;
uint32_t *dest;
/* Configure the uart so that we can get debug output as soon as possible */
nuc_clockconfig();
nuc_lowsetup();
showprogress('A');
/* Clear .bss. We'll do this inline (vs. calling memset) just to be
* certain that there are no issues with the state of global variables.
*/
for (dest = &_sbss; dest < &_ebss; )
{
*dest++ = 0;
}
showprogress('B');
/* Move the intialized data section from his temporary holding spot in
* FLASH into the correct place in SRAM. The correct place in SRAM is
* give by _sdata and _edata. The temporary location is in FLASH at the
* end of all of the other read-only data (.text, .rodata) at _eronly.
*/
for (src = &_eronly, dest = &_sdata; dest < &_edata; )
{
*dest++ = *src++;
}
showprogress('C');
/* Perform early serial initialization */
#ifdef USE_EARLYSERIALINIT
up_earlyserialinit();
#endif
showprogress('D');
/* For the case of the separate user-/kernel-space build, perform whatever
* platform specific initialization of the user memory is required.
* Normally this just means initializing the user space .data and .bss
* segments.
*/
#ifdef CONFIG_NUTTX_KERNEL
nuc_userspace();
showprogress('E');
#endif
/* Initialize onboard resources */
nuc_boardinitialize();
showprogress('F');
/* Then start NuttX */
showprogress('\r');
showprogress('\n');
os_start();
/* Shoulnd't get here */
for(;;);
}
|
