/****************************************************************************
* arch/arm/src/sam3u/sam3u_clockconfig.c
* arch/arm/src/chip/sam3u_clockconfig.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "sam3u_internal.h"
#include "sam3u_pmc.h"
#include "sam3u_eefc.h"
#include "sam3u_wdt.h"
#include "sam3u_supc.h"
#include "sam3u_matrix.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* PMC register settings based on the board configuration values defined
* in board.h
*/
#define CKGR_MOR_KEY (0x37 << CKGR_MOR_KEY_SHIFT)
#define SUPR_CR_KEY (0xa5 << SUPC_CR_KEY_SHIFT)
#define BOARD_CKGR_MOR (CKGR_MOR_KEY|BOARD_CKGR_MOR_MOSCXTST|\
CKGR_MOR_MOSCRCEN|CKGR_MOR_MOSCXTEN)
#define BOARD_CKGR_PLLAR (CKGR_PLLAR_ONE|BOARD_CKGR_PLLAR_MULA|\
BOARD_CKGR_PLLAR_STMODE|BOARD_CKGR_PLLAR_PLLACOUNT|\
BOARD_CKGR_PLLAR_DIVA)
#define BOARD_PMC_MCKR_FAST (BOARD_PMC_MCKR_PRES|PMC_MCKR_CSS_MAIN)
#define BOARD_PMC_MCKR (BOARD_PMC_MCKR_PRES|BOARD_PMC_MCKR_CSS)
#define BOARD_CKGR_UCKR (BOARD_CKGR_UCKR_UPLLCOUNT|CKGR_UCKR_UPLLEN)
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sam3u_efcsetup
*
* Description:
* Configure 2 waitstates for embedded flash access
*
****************************************************************************/
static inline void sam3u_efcsetup(void)
{
putreg32((2 << EEFC_FMR_FWS_SHIFT), SAM3U_EEFC0_FMR);
putreg32((2 << EEFC_FMR_FWS_SHIFT), SAM3U_EEFC1_FMR);
}
/****************************************************************************
* Name: sam3u_wdtsetup
*
* Description:
* Disable the watchdog timer
*
****************************************************************************/
static inline void sam3u_wdtsetup(void)
{
putreg32(WDT_MR_WDDIS, SAM3U_WDT_MR);
}
/****************************************************************************
* Name: sam3u_supcsetup
*
* Description:
* Select the external slow clock
*
****************************************************************************/
static inline void sam3u_supcsetup(void)
{
/* Check if the 32-kHz is already selected */
if ((getreg32(SAM3U_SUPC_SR) & SUPC_SR_OSCSEL) == 0)
{
uint32_t delay;
putreg32((SUPC_CR_XTALSEL|SUPR_CR_KEY), SAM3U_SUPC_CR);
for (delay = 0;
(getreg32(SAM3U_SUPC_SR) & SUPC_SR_OSCSEL) == 0 && delay < UINT32_MAX;
delay++);
}
}
/****************************************************************************
* Name: sam3u_pmcwait
*
* Description:
* Initialize clocking
*
****************************************************************************/
static void sam3u_pmcwait(uint32_t bit)
{
uint32_t delay;
for (delay = 0;
(getreg32(SAM3U_PMC_SR) & bit) == 0 && delay < UINT32_MAX;
delay++);
}
/****************************************************************************
* Name: sam3u_pmcsetup
*
* Description:
* Initialize clocking
*
****************************************************************************/
static inline void sam3u_pmcsetup(void)
{
uint32_t regval;
/* Initialize main oscillator (if it has not already been selected */
if ((getreg32(SAM3U_CKGR_MOR) & CKGR_MOR_MOSCSEL) == 0)
{
putreg32(BOARD_CKGR_MOR, SAM3U_CKGR_MOR);
sam3u_pmcwait(PMC_INT_MOSCXTS);
}
/* Switch to the main oscillator */
putreg32((BOARD_CKGR_MOR|CKGR_MOR_MOSCSEL), SAM3U_CKGR_MOR);
sam3u_pmcwait(PMC_INT_MOSCSELS);
regval = getreg32(SAM3U_PMC_MCKR);
regval &= ~PMC_MCKR_CSS_MASK;
regval |= PMC_MCKR_CSS_MAIN;
putreg32(regval, SAM3U_PMC_MCKR);
sam3u_pmcwait(PMC_INT_MCKRDY);
/* Settup PLLA */
putreg32(BOARD_CKGR_PLLAR, SAM3U_CKGR_PLLAR);
sam3u_pmcwait(PMC_INT_LOCKA);
/* Setup UTMI for USB */
#ifdef CONFIG_USBDEV
regval = getreg32(SAM3U_CKGR_UCKR);
regval |= BOARD_CKGR_UCKR;
putreg32(regval, SAM3U_CKGR_UCKR);
sam3u_pmcwait(PMC_INT_LOCKU);
#endif
/* Switch to the fast clock */
putreg32(BOARD_PMC_MCKR_FAST, SAM3U_PMC_MCKR);
sam3u_pmcwait(PMC_INT_MCKRDY);
putreg32(BOARD_PMC_MCKR, SAM3U_PMC_MCKR);
sam3u_pmcwait(PMC_INT_MCKRDY);
}
/****************************************************************************
* Name: sam3u_enabledefaultmaster and sam3u_disabledefaultmaster
*
* Description:
* Enable/disable default master access
*
****************************************************************************/
static inline void sam3u_enabledefaultmaster(void)
{
uint32_t regval;
/* Set default master: SRAM0 -> Cortex-M3 System */
regval = getreg32(SAM3U_MATRIX_SCFG0);
regval |= (MATRIX_SCFG0_FIXEDDEFMSTR_ARMS|MATRIX_SCFG_DEFMSTRTYPE_FIXED);
putreg32(regval, SAM3U_MATRIX_SCFG0);
/* Set default master: SRAM1 -> Cortex-M3 System */
regval = getreg32(SAM3U_MATRIX_SCFG1);
regval |= (MATRIX_SCFG1_FIXEDDEFMSTR_ARMS|MATRIX_SCFG_DEFMSTRTYPE_FIXED);
putreg32(regval, SAM3U_MATRIX_SCFG1);
/* Set default master: Internal flash0 -> Cortex-M3 Instruction/Data */
regval = getreg32(SAM3U_MATRIX_SCFG3);
regval |= (MATRIX_SCFG3_FIXEDDEFMSTR_ARMC|MATRIX_SCFG_DEFMSTRTYPE_FIXED);
putreg32(regval, SAM3U_MATRIX_SCFG3);
}
#if 0 /* Not used */
static inline void sam3u_disabledefaultmaster(void)
{
uint32_t regval;
/* Clear default master: SRAM0 -> Cortex-M3 System */
regval = getreg32(SAM3U_MATRIX_SCFG0);
regval &= ~MATRIX_SCFG_DEFMSTRTYPE_MASK;
putreg32(regval, SAM3U_MATRIX_SCFG0);
/* Clear default master: SRAM1 -> Cortex-M3 System */
regval = getreg32(SAM3U_MATRIX_SCFG1);
regval &= ~MATRIX_SCFG_DEFMSTRTYPE_MASK;
putreg32(regval, SAM3U_MATRIX_SCFG1);
/* Clear default master: Internal flash0 -> Cortex-M3 Instruction/Data */
regval = getreg32(SAM3U_MATRIX_SCFG3);
regval &= ~MATRIX_SCFG_DEFMSTRTYPE_MASK;
putreg32(regval, SAM3U_MATRIX_SCFG3);
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/************************************************************************************
* Name: sam3u_clockconfig
*
* Description:
* Called to initialize the SAM3U. This does whatever setup is needed to put the
* SoC in a usable state. This includes the initialization of clocking using the
* settings in board.h. (After power-on reset, the sam3u is initiallyrunning on
* a 4MHz internal RC clock). This function also performs other low-level chip
* initialization of the chip including EFC, master clock, IRQ & watchdog
* configuration.
*
************************************************************************************/
void sam3u_clockconfig(void)
{
/* Configure embedded flash access */
sam3u_efcsetup();
/* Configure the watchdog timer */
sam3u_wdtsetup();
/* Setup the supply controller to use the external slow clock */
sam3u_supcsetup();
/* Initialize clocking */
sam3u_pmcsetup();
/* Optimize CPU setting for speed */
sam3u_enabledefaultmaster();
}
