/****************************************************************************
* arch/arm/src/sam3u-ek/sam3u_dmac.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <arch/irq.h>
#include "up_arch.h"
#include "up_internal.h"
#include "os_internal.h"
#include "chip.h"
#include "sam3u_dmac.h"
#include "sam3u_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure descibes one DMA channel */
struct sam3u_dma_s
{
uint8_t chan; /* DMA channel number (0-6) */
uint8_t fifosize; /* Size of DMA FIFO in btyes */
bool inuse; /* TRUE: The DMA channel is in use */
uint32_t base; /* DMA register channel base address */
dma_callback_t callback; /* Callback invoked when the DMA completes */
void *arg; /* Argument passed to callback function */
volatile uint16_t xfrsize; /* Total transfer size */
};
/****************************************************************************
* Private Data
****************************************************************************/
/* This semaphore protects the DMA channel table */
static sem_t g_dmasem;
/* This array describes the state of each DMA */
static struct sam3u_dma_s g_dma[CONFIG_SAM3U_NDMACHAN] =
{
#ifdef CONFIG_ARCH_CHIP_AT91SAM3U4E
/* the AT91SAM3U4E has four DMA channels. The FIFOs for channels 0-2 are
* 8 bytes in size; channel 3 is 32 bytes.
*/
#if CONFIG_SAM3U_NDMACHAN != 4
# error "Logic here assumes CONFIG_SAM3U_NDMACHAN is 4"
#endif
{
.chan = 0,
.fifosize = 8,
.base = SAM3U_DMACHAN0_BASE,
},
{
.chan = 1,
.fifosize = 8,
.base = SAM3U_DMACHAN1_BASE,
},
{
.chan = 2,
.fifosize = 8,
.base = SAM3U_DMACHAN2_BASE,
},
{
.chan = 3,
.fifosize = 32,
.base = SAM3U_DMACHAN3_BASE,
}
};
/****************************************************************************
* Private Functions
****************************************************************************/
/************************************************************************************
* Name: sam3u_dmatake() and sam3u_dmagive()
*
* Description:
* Used to get exclusive access to a DMA channel.
*
************************************************************************************/
static void sam3u_dmatake(void)
{
/* Take the semaphore (perhaps waiting) */
while (sem_wait(&g_dmasem) != 0)
{
/* The only case that an error should occur here is if the wait was awakened
* by a signal.
*/
ASSERT(errno == EINTR);
}
}
static inline void sam3u_dmagive(void)
{
(void)sem_post(&g_dmasem);
}
/************************************************************************************
* Name: sam3u_dmainterrupt
*
* Description:
* DMA interrupt handler
*
************************************************************************************/
static int sam3u_dmainterrupt(int irq, void *context)
{
# warning "Missing logic"
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam3u_dmainitialize
*
* Description:
* Initialize the DMA subsystem
*
* Returned Value:
* None
*
****************************************************************************/
void weak_function up_dmainitialize(void)
{
struct sam3u_dma_s *dmach;
/* Enable peripheral clock */
putreg32((1 << SAM3U_PID_DMAC), SAM3U_PMC_PCER);
/* Disable all DMA interrupts */
putreg32(DMAC_DBC_ERR_ALLINTS, SAM3U_DMAC_EBCIDR);
/* Disable all DMA channels */
putreg32(DMAC_CHDR_DIS_ALL, SAM3U_DMAC_CHDR);
/* Attach DMA interrupt vector */
(void)irq_attach(SAM3U_IRQ_DMAC, sam3u_dmainterrupt);
/* Enable the IRQ at the NVIC (still disabled at the DMA controller) */
up_enable_irq(SAM3U_IRQ_DMAC);
/* Enable the DMA controller */
putreg32(DMAC_EN_ENABLE, SAM3U_DMAC_EN);
}
/****************************************************************************
* Name: sam3u_dmachannel
*
* Description:
* Allocate a DMA channel. This function gives the caller mutually
* sets aside a DMA channel with the required FIFO size and gives the
* caller exclusive access to the DMA channelt.
*
* Returned Value:
* If a DMA channel if the required FIFO size is available, this function
* returns a non-NULL, void* DMA channel handle. NULL is returned on any
* failure.
*
****************************************************************************/
DMA_HANDLE sam3u_dmachannel(unsigned int fifosize)
{
struct sam3u_dma_s *dmach;
unsigned int chndx;
uint32_t regval;
/* Search for an available DMA channel with at least the requested FIFO
* size.
*/
dmach = NULL;
sam3u_dmatake();
for (chndx = 0; chndx < CONFIG_SAM3U_NDMACHAN; chndx++)
{
struct sam3u_dma_s *candidate = &g_dma[chndx];
if (!candidate->inuse && candidate->fifosize >= fifosize)
{
dmach = candidate;
dmach->inuse = true;
break;
}
}
sam3u_dmagive();
/* Did we get one? */
if (dmach)
{
/* Read the status register to clear any pending interrupts on the channel */
(void)getreg32(SAM3U_DMAC_EBCISR);
/* Disable the channel by writing one to the write-only channel disable register */
putreg32(DMAC_CHDR_DIS(chndx), SAM3U_DMAC_CHDR);
/* Initilize the transfer size */
dmach->xfrsize = 0;
}
return (DMA_HANDLE)dmach;
}
/****************************************************************************
* Name: sam3u_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must
* NEVER be used again until sam3u_dmachannel() is called again to re-gain
* a valid handle.
*
* Returned Value:
* None
*
****************************************************************************/
void sam3u_dmafree(DMA_HANDLE handle)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
/* Mark the channel no longer in use. This is an atomic operation and so
* should be safe.
*/
DEBUGASSERT(dmach != NULL);
dmach->inuse = true;
}
/****************************************************************************
* Name: sam3u_dmatxsetup
*
* Description:
* Configure DMA for transmit (memory to peripheral) before using
*
****************************************************************************/
void sam3u_dmarxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t ntransfers, uint32_t ccr)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
uint32_t regval;
# warning "Missing logic"
}
/****************************************************************************
* Name: sam3u_dmarxsetup
*
* Description:
* Configure DMA for receuve (peripheral to memory) before using
*
****************************************************************************/
void sam3u_dmarxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t ntransfers, uint32_t ccr)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
uint32_t regval;
# warning "Missing logic"
}
/****************************************************************************
* Name: sam3u_dmastart
*
* Description:
* Start the DMA transfer
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
* - No DMA in progress
*
****************************************************************************/
void sam3u_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg, bool half)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
DEBUGASSERT(handle != NULL);
/* Save the callback info. This will be invoked whent the DMA commpletes */
dmach->callback = callback;
dmach->arg = arg;
# warning "Missing logic"
}
/****************************************************************************
* Name: sam3u_dmastop
*
* Description:
* Cancel the DMA. After sam3u_dmastop() is called, the DMA channel is
* reset and sam3u_dmasetup() must be called before sam3u_dmastart() can be
* called again
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
void sam3u_dmastop(DMA_HANDLE handle)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
/* Disable the channel by writing one to the write-only channel disable register */
DEBUGASSERT(dmach != NULL);
putreg32(DMAC_CHDR_DIS(dmach->chan), SAM3U_DMAC_CHDR);
}
/****************************************************************************
* Name: sam3u_dmasample
*
* Description:
* Sample DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam3u_dmasample(DMA_HANDLE handle, struct sam3u_dmaregs_s *regs)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
irqstate_t flags;
/* Sample global registers. NOTE: reading EBCISR clears interrupts, but
* that should be okay IF interrupts are enabled when this function is
* called. But there is a race condition where this instrumentation could
* cause lost interrupts.
*/
flags = irqsave();
regs->gcfg = getreg32(SAM3U_DMAC_GCFG);
regs->en = getreg32(SAM3U_DMAC_EN);
regs->sreq = getreg32(SAM3U_DMAC_SREQ);
regs->creq = getreg32(SAM3U_DMAC_CREQ);
regs->last = getreg32(SAM3U_DMAC_LAST);
regs->ebcimr = getreg32(SAM3U_DMAC_EBCIMR);
regs->ebcisr = getreg32(SAM3U_DMAC_EBCISR);
regs->chsr = getreg32(SAM3U_DMAC_CHSR);
/* Sample channel registers */
regs->saddr = getreg32(dmach->base + SAM3U_DMACHAN_SADDR_OFFSET);
regs->daddr = getreg32(dmach->base + SAM3U_DMACHAN_DADDR_OFFSET);
regs->dscr = getreg32(dmach->base + SAM3U_DMACHAN_DSCR_OFFSET);
regs->ctrla = getreg32(dmach->base + SAM3U_DMACHAN_CTRLA_OFFSET);
regs->ctrlb = getreg32(dmach->base + SAM3U_DMACHAN_CTRLB_OFFSET);
regs->cfg = getreg32(dmach->base + SAM3U_DMACHAN_CFG_OFFSET);
irqrestore(flags);
}
#endif
/****************************************************************************
* Name: sam3u_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam3u_dmadump(DMA_HANDLE handle, const struct sam3u_dmaregs_s *regs,
const char *msg)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
dmadbg("%s\n", msg);
dmadbg(" DMA Global Registers:\n");
dmadbg(" GCFG[%08x]: %08x\n", SAM3U_DMAC_GCFG, regs->gcfg);
dmadbg(" EN[%08x]: %08x\n", SAM3U_DMAC_EN, regs->en);
dmadbg(" SREQ[%08x]: %08x\n", SAM3U_DMAC_SREQ, regs->sreq);
dmadbg(" CREQ[%08x]: %08x\n", SAM3U_DMAC_CREQ, regs->creq);
dmadbg(" LAST[%08x]: %08x\n", SAM3U_DMAC_LAST, regs->last);
dmadbg(" EBCIMR[%08x]: %08x\n", SAM3U_DMAC_EBCIMR, regs->ebcimr);
dmadbg(" EBCISR[%08x]: %08x\n", SAM3U_DMAC_EBCISR, regs->ebcisr);
dmadbg(" CHSR[%08x]: %08x\n", SAM3U_DMAC_CHSR, regs->chsr);
dmadbg(" DMA Channel Registers:\n");
dmadbg(" SADDR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_SADDR_OFFSET, regs->saddr);
dmadbg(" DADDR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_DADDR_OFFSET, regs->daddr);
dmadbg(" DSCR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_DSCR_OFFSET, regs->dscr);
dmadbg(" CTRLA[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CTRLA_OFFSET, regs->ctrla);
dmadbg(" CTRLB[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CTRLB_OFFSET, regs->ctrlb);
dmadbg(" CFG[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CFG_OFFSET, regs->cfg);
}
#endif
