/************************************************************************************
* arch/arm/src/sam3u/sam3u_internal.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H
#define __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include "up_internal.h"
#include "chip.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_GPIOA_IRQ) || defined(CONFIG_GPIOB_IRQ) || defined(CONFIG_GPIOC_IRQ)
# define CONFIG_GPIO_IRQ 1
#else
# undef CONFIG_GPIO_IRQ
#endif
/* Bit-encoded input to sam3u_configgpio() ******************************************/
/* 16-bit Encoding:
* MMCC CII. VPPB BBBB
*/
/* Input/Output mode:
*
* MM.. .... .... ....
*/
#define GPIO_MODE_SHIFT (14) /* Bits 14-15: GPIO mode */
#define GPIO_MODE_MASK (3 << GPIO_MODE_SHIFT)
# define GPIO_INPUT (0 << GPIO_MODE_SHIFT) /* Input */
# define GPIO_OUTPUT (1 << GPIO_MODE_SHIFT) /* Output */
# define GPIO_PERIPHA (2 << GPIO_MODE_SHIFT) /* Controlled by periph A signal */
# define GPIO_PERIPHB (3 << GPIO_MODE_SHIFT) /* Controlled by periph B signal */
/* These bits set the configuration of the pin:
* ..CC C... .... ....
*/
#define GPIO_CFG_SHIFT (11) /* Bits 11-13: GPIO configuration bits */
#define GPIO_CFG_MASK (3 << GPIO_CFG_SHIFT)
# define GPIO_CFG_DEFAULT (0 << GPIO_CFG_SHIFT) /* Default, no attribute */
# define GPIO_CFG_PULLUP (1 << GPIO_CFG_SHIFT) /* Bit 11: Internal pull-up */
# define GPIO_CFG_DEGLITCH (2 << GPIO_CFG_SHIFT) /* Bit 12: Internal glitch filter */
# define GPIO_CFG_OPENDRAIN (4 << GPIO_CFG_SHIFT) /* Bit 13: Open drain */
/* Additional interrupt modes:
* .... .II. .... ....
*/
#define GPIO_INT_SHIFT (9) /* Bits 9-10: GPIO configuration bits */
#define GPIO_INT_MASK (3 << GPIO_INT_SHIFT)
# define GPIO_INT_LEVEL (1 << 10) /* Bit 10: Level detection interrupt */
# define GPIO_INT_EDGE (0) /* (vs. Edge detection interrupt) */
# define GPIO_INT_HIGHLEVEL (1 << 9) /* Bit 9: High level detection interrupt */
# define GPIO_INT_LOWLEVEL (0) /* (vs. Low level detection interrupt) */
# define GPIO_INT_RISING (1 << 9) /* Bit 9: Rising edge detection interrupt */
# define GPIO_INT_FALLING (0) /* (vs. Falling edge detection interrupt) */
/* If the pin is an GPIO output, then this identifies the initial output value:
* .... .... V... ....
*/
#define GPIO_OUTPUT_SET (1 << 7) /* Bit 7: Inital value of output */
#define GPIO_OUTPUT_CLEAR (0)
/* This identifies the GPIO port:
* .... .... .PP. ....
*/
#define GPIO_PORT_SHIFT (5) /* Bit 5-6: Port number */
#define GPIO_PORT_MASK (3 << GPIO_PORT_SHIFT)
# define GPIO_PORT_PIOA (0 << GPIO_PORT_SHIFT)
# define GPIO_PORT_PIOB (1 << GPIO_PORT_SHIFT)
# define GPIO_PORT_PIOC (2 << GPIO_PORT_SHIFT)
/* This identifies the bit in the port:
* .... .... ...B BBBB
*/
#define GPIO_PIN_SHIFT 0 /* Bits 0-3: GPIO number: 0-15 */
#define GPIO_PIN_MASK (15 << GPIO_PIN_SHIFT)
#define GPIO_PIN0 (0 << GPIO_PIN_SHIFT)
#define GPIO_PIN1 (1 << GPIO_PIN_SHIFT)
#define GPIO_PIN2 (2 << GPIO_PIN_SHIFT)
#define GPIO_PIN3 (3 << GPIO_PIN_SHIFT)
#define GPIO_PIN4 (4 << GPIO_PIN_SHIFT)
#define GPIO_PIN5 (5 << GPIO_PIN_SHIFT)
#define GPIO_PIN6 (6 << GPIO_PIN_SHIFT)
#define GPIO_PIN7 (7 << GPIO_PIN_SHIFT)
#define GPIO_PIN8 (8 << GPIO_PIN_SHIFT)
#define GPIO_PIN9 (9 << GPIO_PIN_SHIFT)
#define GPIO_PIN10 (10 << GPIO_PIN_SHIFT)
#define GPIO_PIN11 (11 << GPIO_PIN_SHIFT)
#define GPIO_PIN12 (12 << GPIO_PIN_SHIFT)
#define GPIO_PIN13 (13 << GPIO_PIN_SHIFT)
#define GPIO_PIN14 (14 << GPIO_PIN_SHIFT)
#define GPIO_PIN15 (15 << GPIO_PIN_SHIFT)
#define GPIO_PIN16 (16 << GPIO_PIN_SHIFT)
#define GPIO_PIN17 (17 << GPIO_PIN_SHIFT)
#define GPIO_PIN18 (18 << GPIO_PIN_SHIFT)
#define GPIO_PIN19 (19 << GPIO_PIN_SHIFT)
#define GPIO_PIN20 (20 << GPIO_PIN_SHIFT)
#define GPIO_PIN21 (21 << GPIO_PIN_SHIFT)
#define GPIO_PIN22 (22 << GPIO_PIN_SHIFT)
#define GPIO_PIN23 (23 << GPIO_PIN_SHIFT)
#define GPIO_PIN24 (24 << GPIO_PIN_SHIFT)
#define GPIO_PIN25 (25 << GPIO_PIN_SHIFT)
#define GPIO_PIN26 (26 << GPIO_PIN_SHIFT)
#define GPIO_PIN27 (27 << GPIO_PIN_SHIFT)
#define GPIO_PIN28 (28 << GPIO_PIN_SHIFT)
#define GPIO_PIN29 (29 << GPIO_PIN_SHIFT)
#define GPIO_PIN30 (30 << GPIO_PIN_SHIFT)
#define GPIO_PIN31 (31 << GPIO_PIN_SHIFT)
/* GPIO pin definitions *************************************************************/
#define GPIO_ADC0_AD0 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21)
#define GPIO_ADC0_AD1 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN30)
#define GPIO_ADC0_AD2 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN3)
#define GPIO_ADC0_AD3 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN4)
#define GPIO_ADC0_AD4 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN15)
#define GPIO_ADC0_AD5 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN16)
#define GPIO_ADC0_AD6 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN17)
#define GPIO_ADC0_AD7 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN18)
#define GPIO_CAN_XCVR_RS (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_OUTPUT_SET|GPIO_PIN23)
#define GPIO_CAN1_XCVR_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN27)
#define GPIO_CAN1_XCVR_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN26)
#define GPIO_CAN2_XCVR_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN29)
#define GPIO_CAN2_XCVR_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN28)
#define GPIO_SMC_D0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN9) /* Check! */
#define GPIO_SMC_D1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN10) /* Check! */
#define GPIO_SMC_D2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN11) /* Check! */
#define GPIO_SMC_D3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN12) /* Check! */
#define GPIO_SMC_D4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN13) /* Check! */
#define GPIO_SMC_D5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN14) /* Check! */
#define GPIO_SMC_D6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN15) /* Check! */
#define GPIO_SMC_D7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN16) /* Check! */
#define GPIO_SMC_D8 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN25) /* Check! */
#define GPIO_SMC_D9 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN26) /* Check! */
#define GPIO_SMC_D10 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN27) /* Check! */
#define GPIO_SMC_D11 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN28) /* Check! */
#define GPIO_SMC_D12 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN29) /* Check! */
#define GPIO_SMC_D13 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN30) /* Check! */
#define GPIO_SMC_D14 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN31) /* Check! */
#define GPIO_SMC_D15 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN6) /* Check! */
#define GPIO_SMC_NCS0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN20)
#define GPIO_SMC_NRD (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN19)
#define GPIO_SMC_NWE (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN23)
#define GPIO_SMC_PSRAM_A0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN0) /* Check! */
#define GPIO_SMC_PSRAM_A1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN1) /* Check! */
#define GPIO_SMC_PSRAM_A2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN2) /* Check! */
#define GPIO_SMC_PSRAM_A3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN3) /* Check! */
#define GPIO_SMC_PSRAM_A4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN4) /* Check! */
#define GPIO_SMC_PSRAM_A5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN5) /* Check! */
#define GPIO_SMC_PSRAM_A6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN6) /* Check! */
#define GPIO_SMC_PSRAM_A7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN7) /* Check! */
#define GPIO_SMC_PSRAM_A8 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN8) /* Check! */
#define GPIO_SMC_PSRAM_A9 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN9) /* Check! */
#define GPIO_SMC_PSRAM_A10 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN10) /* Check! */
#define GPIO_SMC_PSRAM_A11 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN11) /* Check! */
#define GPIO_SMC_PSRAM_A12 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN24) /* Check! */
#define GPIO_SMC_PSRAM_A13 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN25) /* Check! */
#define GPIO_SMC_PSRAM_A14 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN26) /* Check! */
#define GPIO_SMC_PSRAM_A15 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN27) /* Check! */
#define GPIO_SMC_PSRAM_A16 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN27) /* Check! */
#define GPIO_SMC_PSRAM_A17 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN28) /* Check! */
#define GPIO_SMC_PSRAM_A18 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN29) /* Check! */
#define GPIO_SMC_PSRAM_NBS0 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN7) /* Check! */
#define GPIO_SMC_PSRAM_NBS1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN15)
#define GPIO_SMC_A1 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8)
#define GPIO_SMC_NCS2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN16)
#define GPIO_SMC_LCD_RS (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8)
#define GPIO_MCI_DAT0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN5)
#define GPIO_MCI_DAT1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6)
#define GPIO_MCI_DAT2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN7)
#define GPIO_MCI_DAT3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN8)
#define GPIO_MCI_DAT4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN28)
#define GPIO_MCI_DAT5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN29)
#define GPIO_MCI_DAT6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN30)
#define GPIO_MCI_DAT7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN31)
#define GPIO_MCI_CK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN3)
#define GPIO_MCI_DA (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN4)
#define GPIO_MCI_DAT0IN (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN5)
#define GPIO_PWMC_PWMH0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN0)
#define GPIO_PWMC_PWML0 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN7)
#define GPIO_PWMC_PWMH1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN1)
#define GPIO_PWMC_PWML1 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN8)
#define GPIO_PWMC_PWMH2 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN2)
#define GPIO_PWMC_PWML2 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN9)
#define GPIO_SPI0_MISO (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN13)
#define GPIO_SPI0_MOSI (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN14)
#define GPIO_SPI0_SPCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN15)
//#define GPIO_SPI0_NPCS2_PC14 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN14)
#define GPIO_SPI0_NPCS2_PC14 (GPIO_OUTPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_OUTPUT_CLEAR|GPIO_PIN14)
#define GPIO_SSC_TD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN26)
#define GPIO_SSC_TK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN28)
#define GPIO_SSC_TF (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN30)
#define GPIO_PCK0 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21)
#define GPIO_TWI_TWD0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN9)
#define GPIO_TWI_TWCK0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN10)
#define GPIO_TWI_TWD1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN24)
#define GPIO_TWI_TWCK1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN25)
#define GPIO_UART_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN12)
#define GPIO_UART_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN11)
#define GPIO_USART0_CTS (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN8)
#define GPIO_USART0_DCD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN11)
#define GPIO_USART0_DSR (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN10)
#define GPIO_USART0_DTR (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN9)
#define GPIO_USART0_RI (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN12)
#define GPIO_USART0_RTS (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN7)
#define GPIO_USART0_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN19)
#define GPIO_USART0_SCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN17)
#define GPIO_USART0_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN18)
#define GPIO_USART1_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN23)
#define GPIO_USART1_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN22)
#define GPIO_USART1_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21)
#define GPIO_USART1_SCK (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN24)
#define GPIO_USART1_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN20)
#define GPIO_USART2_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN22)
#define GPIO_USART2_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN21)
#define GPIO_USART2_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN23)
#define GPIO_USART2_SCK (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN25)
#define GPIO_USART2_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN22)
#define GPIO_USART3_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN10)
#define GPIO_USART3_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN11)
#define GPIO_USART3_RXD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN13)
#define GPIO_USART3_SCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN19)
#define GPIO_USART3_TXD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN12)
#define GPIO_USB_VBUS (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN0)
/* DMA ******************************************************************************/
/* Flags used to characterize the desired DMA channel. The naming convention is that
* one side is the peripheral and the other is memory (however, the interface could still
* be used if, for example, both sides were memory although the naming would be awkward)
*/
/* Unchange-able properties of the channel */
#define DMACH_FLAG_FLOWCONTROL (1 << 0) /* Bit 0: Channel supports flow control */
#define DMACH_FLAG_FIFOSIZE_SHIFT (1) /* Bit 1: Size of DMA FIFO */
#define DMACH_FLAG_FIFOSIZE_MASK (1 << DMACH_FLAG_FIFOSIZE_SHIFT)
# define DMACH_FLAG_FIFO_8BYTES (0 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 8 bytes */
# define DMACH_FLAG_FIFO_32BYTES (1 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 32 bytes */
/* Configurable properties of the channel */
#define DMACH_FLAG_BURST_LARGEST 0 /* Largest length AHB burst */
#define DMACH_FLAG_BURST_HALF 1 /* Half FIFO size */
#define DMACH_FLAG_BURST_SINGLE 2 /* Single AHB access */
#define DMACH_FLAG_FIFOCFG_SHIFT (2) /* Bits 2-3: FIFO configuration */
#define DMACH_FLAG_FIFOCFG_MASK (3 << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_LARGEST (DMACH_FLAG_BURST_LARGEST << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_HALF (DMACH_FLAG_BURST_HALF << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_SINGLE (DMACH_FLAG_BURST_SINGLE << DMACH_FLAG_FIFOCFG_SHIFT)
/* Peripheral endpoint characteristics */
#define DMACH_FLAG_PERIPHPID_SHIFT (4) /* Bits 4-7: Peripheral PID */
#define DMACH_FLAG_PERIPHPID_MASK (15 << DMACH_FLAG_PERIPHPID_SHIFT)
#define DMACH_FLAG_PERIPHH2SEL (1 << 8) /* Bits 8: HW handshaking */
#define DMACH_FLAG_PERIPHWIDTH_SHIFT (9) /* Bits 9-10: Peripheral width */
#define DMACH_FLAG_PERIPHWIDTH_MASK (3 << DMACH_FLAG_PERIPHWIDTH_SHIFT)
# define DMACH_FLAG_PERIPHWIDTH_8BITS (0 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 8 bits */
# define DMACH_FLAG_PERIPHWIDTH_16BITS (1 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 16 bits */
# define DMACH_FLAG_PERIPHWIDTH_32BITS (2 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 32 bits */
#define DMACH_FLAG_PERIPHINCREMENT (1 << 11) /* Bit 11: Autoincrement peripheral address */
#define DMACH_FLAG_PERIPHLLIMODE (1 << 12) /* Bit 12: Use link list descriptors */
#define DMACH_FLAG_PERIPHCHUNKSIZE (1 << 13) /* Bit 13: Peripheral chunk size */
# define DMACH_FLAG_PERIPHCHUNKSIZE_1 (0) /* Peripheral chunksize = 1 */
# define DMACH_FLAG_PERIPHCHUNKSIZE_4 DMACH_FLAG_PERIPHCHUNKSIZE /* Peripheral chunksize = 4 */
/* Memory endpoint characteristics */
#define DMACH_FLAG_MEMPID_SHIFT (14) /* Bits 14-17: Memory PID */
#define DMACH_FLAG_MEMPID_MASK (15 << DMACH_FLAG_PERIPHPID_SHIFT)
#define DMACH_FLAG_MEMH2SEL (1 << 18) /* Bits 18: HW handshaking */
#define DMACH_FLAG_MEMWIDTH_SHIFT (19) /* Bits 19-20: Memory width */
#define DMACH_FLAG_MEMWIDTH_MASK (3 << DMACH_FLAG_MEMWIDTH_SHIFT)
# define DMACH_FLAG_MEMWIDTH_8BITS (0 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 8 bits */
# define DMACH_FLAG_MEMWIDTH_16BITS (1 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 16 bits */
# define DMACH_FLAG_MEMWIDTH_32BITS (2 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 32 bits */
#define DMACH_FLAG_MEMINCREMENT (1 << 21) /* Bit 21: Autoincrement memory address */
#define DMACH_FLAG_MEMLLIMODE (1 << 22) /* Bit 22: Use link list descriptors */
#define DMACH_FLAG_MEMCHUNKSIZE (1 << 23) /* Bit 23: Memory chunk size */
# define DMACH_FLAG_MEMCHUNKSIZE_1 (0) /* Memory chunksize = 1 */
# define DMACH_FLAG_MEMCHUNKSIZE_4 DMACH_FLAG_MEMCHUNKSIZE /* Memory chunksize = 4 */
/************************************************************************************
* Public Types
************************************************************************************/
typedef FAR void *DMA_HANDLE;
typedef void (*dma_callback_t)(DMA_HANDLE handle, uint8_t isr, void *arg);
/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
#ifdef CONFIG_DEBUG_DMA
struct sam3u_dmaregs_s
{
/* Global Registers */
uint32_t gcfg; /* DMAC Global Configuration Register */
uint32_t en; /* DMAC Enable Register */
uint32_t sreq; /* DMAC Software Single Request Register */
uint32_t creq; /* DMAC Software Chunk Transfer Request Register */
uint32_t last; /* DMAC Software Last Transfer Flag Register */
uint32_t ebcimr; /* DMAC Error Mask */
uint32_t ebcisr; /* DMAC Error Status */
uint32_t chsr; /* DMAC Channel Handler Status Register */
/* Channel Registers */
uint32_t saddr; /* DMAC Channel Source Address Register */
uint32_t daddr; /* DMAC Channel Destination Address Register */
uint32_t dscr; /* DMAC Channel Descriptor Address Register */
uint32_t ctrla; /* DMAC Channel Control A Register */
uint32_t ctrlb; /* DMAC Channel Control B Register */
uint32_t cfg; /* DMAC Channel Configuration Register */
};
#endif
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: sam3u_clockconfig
*
* Description:
* Called to initialize the SAM3U. This does whatever setup is needed to put the
* SoC in a usable state. This includes the initialization of clocking using the
* settings in board.h. (After power-on reset, the sam3u is initiallyrunning on
* a 4MHz internal RC clock). This function also performs other low-level chip
* initialization of the chip including EFC, master clock, IRQ and watchdog
* configuration.
*
************************************************************************************/
EXTERN void sam3u_clockconfig(void);
/************************************************************************************
* Name: sam3u_lowsetup
*
* Description:
* Called at the very beginning of _start. Performs low level initialization
* including setup of the console UART. This UART done early so that the serial
* console is available for debugging very early in the boot sequence.
*
************************************************************************************/
EXTERN void sam3u_lowsetup(void);
/************************************************************************************
* Name: sam3u_gpioirqinitialize
*
* Description:
* Initialize logic to support a second level of interrupt decoding for GPIO pins.
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void sam3u_gpioirqinitialize(void);
#else
# define sam3u_gpioirqinitialize()
#endif
/************************************************************************************
* Name: sam3u_configgpio
*
* Description:
* Configure a GPIO pin based on bit-encoded description of the pin.
*
************************************************************************************/
EXTERN int sam3u_configgpio(uint16_t cfgset);
/************************************************************************************
* Name: sam3u_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
************************************************************************************/
EXTERN void sam3u_gpiowrite(uint16_t pinset, bool value);
/************************************************************************************
* Name: sam3u_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
************************************************************************************/
EXTERN bool sam3u_gpioread(uint16_t pinset);
/************************************************************************************
* Name: sam3u_gpioirq
*
* Description:
* Configure an interrupt for the specified GPIO pin.
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void sam3u_gpioirq(uint16_t pinset);
#else
# define sam3u_gpioirq(pinset)
#endif
/************************************************************************************
* Name: sam3u_gpioirqenable
*
* Description:
* Enable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void sam3u_gpioirqenable(int irq);
#else
# define sam3u_gpioirqenable(irq)
#endif
/************************************************************************************
* Name: sam3u_gpioirqdisable
*
* Description:
* Disable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void sam3u_gpioirqdisable(int irq);
#else
# define sam3u_gpioirqdisable(irq)
#endif
/****************************************************************************
* Name: sam3u_dmachannel
*
* Description:
* Allocate a DMA channel. This function sets aside a DMA channel with
* the required FIFO size and flow control capabilities (determined by
* dma_flags) then gives the caller exclusive access to the DMA channel.
*
* The naming convention in all of the DMA interfaces is that one side is
* the 'peripheral' and the other is 'memory'. Howerver, the interface
* could still be used if, for example, both sides were memory although
* the naming would be awkward.
*
* Returned Value:
* If a DMA channel if the required FIFO size is available, this function
* returns a non-NULL, void* DMA channel handle. NULL is returned on any
* failure.
*
****************************************************************************/
EXTERN DMA_HANDLE sam3u_dmachannel(uint32_t dmach_flags);
/****************************************************************************
* Name: sam3u_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must
* NEVER be used again until sam3u_dmachannel() is called again to re-gain
* a valid handle.
*
* Returned Value:
* None
*
****************************************************************************/
EXTERN void sam3u_dmafree(DMA_HANDLE handle);
/****************************************************************************
* Name: sam3u_dmatxsetup
*
* Description:
* Configure DMA for transmit (memory to periphal).
*
****************************************************************************/
EXTERN void sam3u_dmatxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr,
size_t nbytes);
/****************************************************************************
* Name: sam3u_dmarxsetup
*
* Description:
* Configure DMA for receive (peripheral to memory).
*
****************************************************************************/
EXTERN void sam3u_dmarxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr,
size_t nbytes);
/****************************************************************************
* Name: sam3u_dmastart
*
* Description:
* Start the DMA transfer
*
****************************************************************************/
EXTERN void sam3u_dmastart(DMA_HANDLE handle, dma_callback_t callback,
void *arg, bool half);
/****************************************************************************
* Name: sam3u_dmastop
*
* Description:
* Cancel the DMA. After sam3u_dmastop() is called, the DMA channel is
* reset and sam3u_dmasetup() must be called before sam3u_dmastart() can be
* called again
*
****************************************************************************/
EXTERN void sam3u_dmastop(DMA_HANDLE handle);
/****************************************************************************
* Name: sam3u_dmasample
*
* Description:
* Sample DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
EXTERN void sam3u_dmasample(DMA_HANDLE handle, struct sam3u_dmaregs_s *regs);
#else
# define sam3u_dmasample(handle,regs)
#endif
/****************************************************************************
* Name: sam3u_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
EXTERN void sam3u_dmadump(DMA_HANDLE handle, const struct sam3u_dmaregs_s *regs,
const char *msg);
#else
# define sam3u_dmadump(handle,regs,msg)
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H */