blob: 3520d74c3be5226631fb094cb69408a9e283cf3b (
plain) (
tree)
|
|
/****************************************************************************************
* arch/arm/src/sam3u/sam3u_pdc.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAM3U_SAM3U_PDC_H
#define __ARCH_ARM_SRC_SAM3U_SAM3U_PDC_H
/****************************************************************************************
* Included Files
****************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
#include "sam3u_memorymap.h"
/****************************************************************************************
* Pre-processor Definitions
****************************************************************************************/
/* PDC register offsets *****************************************************************/
#define SAM3U_PDC_RPR_OFFSET 0x100 /* Receive Pointer Register */
#define SAM3U_PDC_RCR_OFFSET 0x104 /* Receive Counter Register */
#define SAM3U_PDC_TPR_OFFSET 0x108 /* Transmit Pointer Register */
#define SAM3U_PDC_TCR_OFFSET 0x10c /* Transmit Counter Register */
#define SAM3U_PDC_RNPR_OFFSET 0x110 /* Receive Next Pointer Register */
#define SAM3U_PDC_RNCR_OFFSET 0x114 /* Receive Next Counter Register */
#define SAM3U_PDC_TNPR_OFFSET 0x118 /* Transmit Next Pointer Register */
#define SAM3U_PDC_TNCR_OFFSET 0x11c /* Transmit Next Counter Register */
#define SAM3U_PDC_PTCR_OFFSET 0x120 /* Transfer Control Register */
#define SAM3U_PDC_PTSR_OFFSET 0x124 /* Transfer Status Register */
/* PDC register adresses ****************************************************************/
/* These 10 registers are mapped in the peripheral memory space at the same offset. */
/* PDC register bit definitions *********************************************************/
#define PDC_RCR_RXCTR_SHIFT (0) /* Bits 0-15: Receive Counter Register */
#define PDC_RCR_RXCTR_MASK (0xffff << PDC_RCR_RXCTR_SHIFT)
#define PDC_TCR_TXCTR_SHIFT (0) /* Bits 0-15: Transmit Counter Register */
#define PDC_TCR_TXCTR_MASK (0xffff << PDC_TCR_TXCTR_SHIFT)
#define PDC_RNCR_RXNCTR_SHIFT (0) /* Bits 0-15: Receive Next Counter */
#define PDC_RNCR_RXNCTR_MASK (0xffff << PDC_RNCR_RXNCTR_SHIFT)
#define PDC_TNCR_TXNCTR_SHIFT (0) /* Bits 0-15: Transmit Counter Next */
#define PDC_TNCR_TXNCTR_MASK (0xffff << PDC_TNCR_TXNCTR_SHIFT)
#define PDC_PTCR_RXTEN (1 << 0) /* Bit 0: Receiver Transfer Enable */
#define PDC_PTCR_RXTDIS (1 << 1) /* Bit 1: Receiver Transfer Disable */
#define PDC_PTCR_TXTEN (1 << 8) /* Bit 8: Transmitter Transfer Enable */
#define PDC_PTCR_TXTDIS (1 << 9) /* Bit 9: Transmitter Transfer Disable */
#define PDC_PTSR_RXTEN (1 << 0) /* Bit 0: Receiver Transfer Enable */
#define PDC_PTSR_TXTEN (1 << 8) /* Bit 8: Transmitter Transfer Enable */
/****************************************************************************************
* Public Types
****************************************************************************************/
/****************************************************************************************
* Public Data
****************************************************************************************/
/****************************************************************************************
* Public Functions
****************************************************************************************/
#endif /* __ARCH_ARM_SRC_SAM3U_SAM3U_PDC_H */
|