#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
comment "STM32 Configuration Options"
choice
prompt "STM32 Chip Selection"
default ARCH_CHIP_STM32F103ZET6
depends on ARCH_CHIP_STM32
config ARCH_CHIP_STM32F100C8
bool "STM32F100C8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100CB
bool "STM32F100CB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100R8
bool "STM32F100R8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100RB
bool "STM32F100RB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100RC
bool "STM32F100RC"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F100RD
bool "STM32F100RD"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F100RE
bool "STM32F100RE"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F100V8
bool "STM32F100V8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100VB
bool "STM32F100VB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100VC
bool "STM32F100VC"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F100VD
bool "STM32F100VD"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F100VE
bool "STM32F100VE"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103RET6
bool "STM32F103RET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103VCT6
bool "STM32F103VCT6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103VET6
bool "STM32F103VET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103ZET6
bool "STM32F103ZET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
config ARCH_CHIP_STM32F105VBT7
bool "STM32F105VBT7"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_CONNECTIVITYLINE
config ARCH_CHIP_STM32F107VC
bool "STM32F107VC"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_CONNECTIVITYLINE
config ARCH_CHIP_STM32F207IG
bool "STM32F207IG"
select ARCH_CORTEXM3
select STM32_STM32F20XX
config ARCH_CHIP_STM32F302CB
bool "STM32F302CB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F302CC
bool "STM32F302CC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F302RB
bool "STM32F302RB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F302RC
bool "STM32F302RC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F302VB
bool "STM32F302VB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F302VC
bool "STM32F302VC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303CB
bool "STM32F303CB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303CC
bool "STM32F303CC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303RB
bool "STM32F303RB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303RC
bool "STM32F303RC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303VB
bool "STM32F303VB"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F303VC
bool "STM32F303VC"
select ARCH_CORTEXM4
select STM32_STM32F30XX
config ARCH_CHIP_STM32F405RG
bool "STM32F405RG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F405VG
bool "STM32F405VG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F405ZG
bool "STM32F405ZG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407VE
bool "STM32F407VE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407VG
bool "STM32F407VG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407ZE
bool "STM32F407ZE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407ZG
bool "STM32F407ZG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407IE
bool "STM32F407IE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407IG
bool "STM32F407IG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
endchoice
config STM32_STM32F10XX
bool
config STM32_VALUELINE
bool
config STM32_HIGHDENSITY
bool
config STM32_CONNECTIVITYLINE
bool
config STM32_STM32F20XX
bool
config STM32_STM32F30XX
bool
config STM32_STM32F40XX
bool
config STM32_DFU
bool "DFU bootloader"
default n
depends on !STM32_VALUELINE
---help---
Configure and position code for use with the STMicro DFU bootloader. Do
not select this option if you will load code using JTAG/SWM.
menu "STM32 Peripheral Support"
config STM32_ADC1
bool "ADC1"
default n
select STM32_ADC
config STM32_ADC2
bool "ADC2"
default n
select STM32_ADC
depends on !STM32_VALUELINE
config STM32_ADC3
bool "ADC3"
default n
select STM32_ADC
depends on !STM32_VALUELINE
config STM32_ADC4
bool "ADC4"
default n
select STM32_ADC
depends on STM32_STM32F30XX
config STM32_BKP
bool "BKP"
default n
depends on STM32_STM32F10XX
config STM32_BKPSRAM
bool "BKP RAM"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_CAN1
bool "CAN1"
default n
select CAN
select STM32_CAN
depends on !STM32_VALUELINE
config STM32_CAN2
bool "CAN2"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select CAN
select STM32_CAN
config STM32_CCMDATARAM
bool "CMD/DATA RAM"
default n
depends on STM32_STM32F40XX
config STM32_CEC
bool "CEC"
default n
depends on STM32_VALUELINE
config STM32_CRC
bool "CRC"
default n
config STM32_CRYP
bool "CRYP"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_DMA1
bool "DMA1"
default n
select ARCH_DMA
config STM32_DMA2
bool "DMA2"
default n
select ARCH_DMA
depends on !STM32_VALUELINE || (STM32_VALUELINE && STM32_HIGHDENSITY)
config STM32_DAC1
bool "DAC1"
default n
select STM32_DAC
config STM32_DAC2
bool "DAC2"
default n
select STM32_DAC
config STM32_DCMI
bool "DCMI"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_ETHMAC
bool "Ethernet MAC"
default n
depends on STM32_CONNECTIVITYLINE || STM32_STM32F20XX || STM32_STM32F40XX
select ARCH_HAVE_PHY
config STM32_FSMC
bool "FSMC"
default n
depends on !STM32_CONNECTIVITYLINE && (STM32_HIGHDENSITY || STM32_STM32F20XX || STM32_STM32F40XX)
config STM32_HASH
bool "HASH"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_I2C1
bool "I2C1"
default n
select STM32_I2C
config STM32_I2C2
bool "I2C2"
default n
select STM32_I2C
config STM32_I2C3
bool "I2C3"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select STM32_I2C
config STM32_IWDG
bool "IWDG"
default n
select WATCHDOG
config STM32_OTGFS
bool "OTG FS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_OTGHS
bool "OTG HS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_PWR
bool "PWR"
default n
config STM32_RNG
bool "RNG"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select ARCH_HAVE_RNG
config STM32_SDIO
bool "SDIO"
default n
depends on !STM32_CONNECTIVITYLINE && !STM32_VALUELINE
config STM32_SPI1
bool "SPI1"
default n
select SPI
select STM32_SPI
config STM32_SPI2
bool "SPI2"
default n
select SPI
select STM32_SPI
config STM32_SPI3
bool "SPI3"
default n
depends on STM32_CONNECTIVITYLINE || STM32_STM32F20XX || STM32_STM32F40XX || (STM32_VALUELINE && STM32_HIGHDENSITY)
select SPI
select STM32_SPI
config STM32_SYSCFG
bool "SYSCFG"
default y
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM1
bool "TIM1"
default n
config STM32_TIM2
bool "TIM2"
default n
config STM32_TIM3
bool "TIM3"
default n
config STM32_TIM4
bool "TIM4"
default n
config STM32_TIM5
bool "TIM5"
default n
config STM32_TIM6
bool "TIM6"
default n
config STM32_TIM7
bool "TIM7"
default n
config STM32_TIM8
bool "TIM8"
default n
depends on !STM32_VALUELINE
config STM32_TIM9
bool "TIM9"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM10
bool "TIM10"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM11
bool "TIM11"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM12
bool "TIM12"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX || STM32_VALUELINE
config STM32_TIM13
bool "TIM13"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX || STM32_VALUELINE
config STM32_TIM14
bool "TIM14"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX || STM32_VALUELINE
config STM32_TIM15
bool "TIM15"
default n
depends on STM32_VALUELINE || STM32_STM32F30XX
config STM32_TIM16
bool "TIM16"
default n
depends on STM32_VALUELINE || STM32_STM32F30XX
config STM32_TIM17
bool "TIM17"
default n
depends on STM32_VALUELINE || STM32_STM32F30XX
config STM32_USART1
bool "USART1"
default n
select ARCH_HAVE_USART1
select STM32_USART
config STM32_USART2
bool "USART2"
default n
select ARCH_HAVE_USART2
select STM32_USART
config STM32_USART3
bool "USART3"
default n
depends on !STM32_STM32F30XX
select ARCH_HAVE_USART3
select STM32_USART
config STM32_UART4
bool "UART4"
default n
depends on !STM32_STM32F30XX
select ARCH_HAVE_UART4
select STM32_USART
config STM32_UART5
bool "UART5"
default n
depends on !STM32_STM32F30XX
select ARCH_HAVE_UART5
select STM32_USART
config STM32_USART6
bool "USART6"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select ARCH_HAVE_USART6
select STM32_USART
config STM32_USB
bool "USB Device"
default n
depends on (STM32_STM32F10XX && !STM32_VALUELINE) || STM32_STM32F30XX
select USBDEV
config STM32_WWDG
bool "WWDG"
default n
select WATCHDOG
endmenu
config STM32_ADC
bool
config STM32_DAC
bool
config STM32_SPI
bool
config STM32_I2C
bool
config STM32_CAN
bool
menu "Alternate Pin Mapping"
choice
prompt "CAN1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_CAN1
default STM32_CAN1_NO_REMAP
config STM32_CAN1_NO_REMAP
bool "No pin remapping"
config STM32_CAN1_REMAP1
bool "CAN1 alternate pin remapping #1"
config STM32_CAN1_REMAP2
bool "CAN1 alternate pin remapping #2"
endchoice
config STM32_CAN2_REMAP
bool "CAN2 Alternate Pin Mapping"
default n
depends on STM32_CONNECTIVITYLINE && STM32_CAN2
config STM32_CEC_REMAP
bool "CEC Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_CEC
config STM32_ETH_REMAP
bool "Ethernet Alternate Pin Mapping"
default n
depends on STM32_CONNECTIVITYLINE && STM32_ETHMAC
config STM32_I2C1_REMAP
bool "I2C1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_I2C1
config STM32_SPI1_REMAP
bool "SPI1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI1
config STM32_SPI3_REMAP
bool "SPI3 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI3 && !STM32_VALUELINE
choice
prompt "TIM1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM1
default STM32_TIM1_NO_REMAP
config STM32_TIM1_NO_REMAP
bool "No pin remapping"
config STM32_TIM1_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM1_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
choice
prompt "TIM2 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM2
default STM32_TIM2_NO_REMAP
config STM32_TIM2_NO_REMAP
bool "No pin remapping"
config STM32_TIM2_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM2_PARTIAL_REMAP_1
bool "Partial pin remapping #1"
config STM32_TIM2_PARTIAL_REMAP_2
bool "Partial pin remapping #2"
endchoice
choice
prompt "TIM3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM3
default STM32_TIM3_NO_REMAP
config STM32_TIM3_NO_REMAP
bool "No pin remapping"
config STM32_TIM3_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_TIM4_REMAP
bool "TIM4 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM4
config STM32_TIM9_REMAP
bool "TIM9 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM9
config STM32_TIM10_REMAP
bool "TIM10 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM10
config STM32_TIM11_REMAP
bool "TIM11 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM11
config STM32_TIM12_REMAP
bool "TIM12 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM12
config STM32_TIM13_REMAP
bool "TIM13 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM13
config STM32_TIM14_REMAP
bool "TIM14 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM14
config STM32_TIM15_REMAP
bool "TIM15 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM15
config STM32_TIM16_REMAP
bool "TIM16 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM16
config STM32_TIM17_REMAP
bool "TIM17 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM17
config STM32_USART1_REMAP
bool "USART1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART1
config STM32_USART2_REMAP
bool "USART2 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART2
choice
prompt "USART3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_USART3
default STM32_USART3_NO_REMAP
config STM32_USART3_NO_REMAP
bool "No pin remapping"
config STM32_USART3_FULL_REMAP
bool "Full pin remapping"
config STM32_USART3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
endmenu
config STM32_FLASH_PREFETCH
bool "Enable FLASH Pre-fetch"
depends on STM32_STM32F20XX || STM32_STM32F40XX
default n
---help---
Enable FLASH prefetch and F2 and F4 parts (FLASH pre-fetch is always enabled
on F1 parts). Some early revisions of F4 parts do not support FLASH pre-fetch
properly and enabling this option may interfere with ADC accuracy.
choice
prompt "JTAG Configuration"
default STM32_JTAG_DISABLE
---help---
JTAG Enable settings (by default JTAG-DP and SW-DP are disabled)
config STM32_JTAG_DISABLE
bool "Disable all JTAG clocking"
config STM32_JTAG_FULL_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP)"
config STM32_JTAG_NOJNTRST_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP) but without JNTRST"
config STM32_JTAG_SW_ENABLE
bool "Set JTAG-DP disabled and SW-DP enabled"
endchoice
config STM32_FORCEPOWER
bool "Force power"
default n
---help---
Timer and I2C devices may need to the following to force power to be applied
unconditionally at power up. (Otherwise, the device is powered when it is
initialized).
config ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG
bool "Custom clock configuration"
default n
---help---
Enables special, board-specific STM32 clock configuration.
config STM32_CCMEXCLUDE
bool "Exclude CCM SRAM from the heap"
depends on STM32_STM32F20XX || STM32_STM32F40XX
default y if ARCH_DMA || ELF
---help---
Exclude CCM SRAM from the HEAP because (1) it cannot be used for DMA
and (2) it appears to be impossible to execute ELF modules from CCM
RAM.
config STM32_FSMC_SRAM
bool "External SRAM on FSMC"
default n
depends on STM32_FSMC
select ARCH_HAVE_HEAP2
---help---
In addition to internal SRAM, SRAM may also be available through the FSMC.
config STM32_TIM1_PWM
bool "TIM1 PWM"
default n
depends on STM32_TIM1
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM1
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM1_CHANNEL
int "TIM1 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM1_PWM
---help---
If TIM1 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM2_PWM
bool "TIM2 PWM"
default n
depends on STM32_TIM2
---help---
Reserve timer 2 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM2
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM2_CHANNEL
int "TIM2 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM2_PWM
---help---
If TIM2 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM3_PWM
bool "TIM3 PWM"
default n
depends on STM32_TIM3
---help---
Reserve timer 3 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM3
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM3_CHANNEL
int "TIM3 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM3_PWM
---help---
If TIM3 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM4_PWM
bool "TIM4 PWM"
default n
depends on STM32_TIM4
---help---
Reserve timer 4 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM4
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM4_CHANNEL
int "TIM4 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM4_PWM
---help---
If TIM4 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM5_PWM
bool "TIM5 PWM"
default n
depends on STM32_TIM5
---help---
Reserve timer 5 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM5
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM5_CHANNEL
int "TIM5 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM5_PWM
---help---
If TIM5 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM8_PWM
bool "TIM8 PWM"
default n
depends on STM32_TIM8
---help---
Reserve timer 8 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM8
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM8_CHANNEL
int "TIM8 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM8_PWM
---help---
If TIM8 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM9_PWM
bool "TIM9 PWM"
default n
depends on STM32_TIM9
---help---
Reserve timer 9 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM9
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM9_CHANNEL
int "TIM9 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM9_PWM
---help---
If TIM9 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM10_PWM
bool "TIM10 PWM"
default n
depends on STM32_TIM10
---help---
Reserve timer 10 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM10
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM10_CHANNEL
int "TIM10 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM10_PWM
---help---
If TIM10 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM11_PWM
bool "TIM11 PWM"
default n
depends on STM32_TIM11
---help---
Reserve timer 11 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM11
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM11_CHANNEL
int "TIM11 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM11_PWM
---help---
If TIM11 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM12_PWM
bool "TIM12 PWM"
default n
depends on STM32_TIM12
---help---
Reserve timer 12 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM12
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM12_CHANNEL
int "TIM12 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM12_PWM
---help---
If TIM12 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM13_PWM
bool "TIM13 PWM"
default n
depends on STM32_TIM13
---help---
Reserve timer 13 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM13
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM13_CHANNEL
int "TIM13 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM13_PWM
---help---
If TIM13 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM14_PWM
bool "TIM14 PWM"
default n
depends on STM32_TIM14
---help---
Reserve timer 14 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM14
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM14_CHANNEL
int "TIM14 PWM Output Channel"
default 1
range 1 4
depends on STM32_TIM14_PWM
---help---
If TIM14 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM15_PWM
bool "TIM15 PWM"
default n
depends on STM32_TIM15
---help---
Reserve timer 15 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM15
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM15_CHANNEL
int "TIM15 PWM Output Channel"
default 1
range 1 2
depends on STM32_TIM15_PWM
---help---
If TIM15 is enabled for PWM usage, you also need specifies the timer output
channel {1,2}
config STM32_TIM16_PWM
bool "TIM16 PWM"
default n
depends on STM32_TIM16
---help---
Reserve timer 16 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM16
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM16_CHANNEL
int "TIM16 PWM Output Channel"
default 1
range 1 1
depends on STM32_TIM16_PWM
---help---
If TIM16 is enabled for PWM usage, you also need specifies the timer output
channel {1}
config STM32_TIM17_PWM
bool "TIM17 PWM"
default n
depends on STM32_TIM17
---help---
Reserve timer 17 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM17
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM17_CHANNEL
int "TIM17 PWM Output Channel"
default 1
range 1 1
depends on STM32_TIM17_PWM
---help---
If TIM17 is enabled for PWM usage, you also need specifies the timer output
channel {1}
config STM32_TIM1_ADC
bool "TIM1 ADC"
default n
depends on STM32_TIM1 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM1 ADC channel"
default STM32_TIM1_ADC1
depends on STM32_TIM1_ADC
config STM32_TIM1_ADC1
bool "TIM1 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM1 to trigger ADC1
config STM32_TIM1_ADC2
bool "TIM1 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM1 to trigger ADC2
config STM32_TIM1_ADC3
bool "TIM1 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM1 to trigger ADC3
endchoice
config STM32_TIM2_ADC
bool "TIM2 ADC"
default n
depends on STM32_TIM2 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM2 ADC channel"
default STM32_TIM2_ADC1
depends on STM32_TIM2_ADC
config STM32_TIM2_ADC1
bool "TIM2 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM2 to trigger ADC1
config STM32_TIM2_ADC2
bool "TIM2 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM2 to trigger ADC2
config STM32_TIM2_ADC3
bool "TIM2 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM2 to trigger ADC3
endchoice
config STM32_TIM3_ADC
bool "TIM3 ADC"
default n
depends on STM32_TIM3 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM3 ADC channel"
default STM32_TIM3_ADC1
depends on STM32_TIM3_ADC
config STM32_TIM3_ADC1
bool "TIM3 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM3 to trigger ADC1
config STM32_TIM3_ADC2
bool "TIM3 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM3 to trigger ADC2
config STM32_TIM3_ADC3
bool "TIM3 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM3 to trigger ADC3
endchoice
config STM32_TIM4_ADC
bool "TIM4 ADC"
default n
depends on STM32_TIM4 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM4 ADC channel"
default STM32_TIM4_ADC1
depends on STM32_TIM4_ADC
config STM32_TIM4_ADC1
bool "TIM4 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM4 to trigger ADC1
config STM32_TIM4_ADC2
bool "TIM4 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM4 to trigger ADC2
config STM32_TIM4_ADC3
bool "TIM4 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM4 to trigger ADC3
endchoice
config STM32_TIM5_ADC
bool "TIM5 ADC"
default n
depends on STM32_TIM5 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM5 ADC channel"
default STM32_TIM5_ADC1
depends on STM32_TIM5_ADC
config STM32_TIM5_ADC1
bool "TIM5 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM5 to trigger ADC1
config STM32_TIM5_ADC2
bool "TIM5 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM5 to trigger ADC2
config STM32_TIM5_ADC3
bool "TIM5 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM5 to trigger ADC3
endchoice
config STM32_TIM8_ADC
bool "TIM8 ADC"
default n
depends on STM32_TIM8 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM8 ADC channel"
default STM32_TIM8_ADC1
depends on STM32_TIM8_ADC
config STM32_TIM8_ADC1
bool "TIM8 ADC channel 1"
depends on STM32_ADC1
select HAVE_ADC1_TIMER
---help---
Reserve TIM8 to trigger ADC1
config STM32_TIM8_ADC2
bool "TIM8 ADC channel 2"
depends on STM32_ADC2
select HAVE_ADC2_TIMER
---help---
Reserve TIM8 to trigger ADC2
config STM32_TIM8_ADC3
bool "TIM8 ADC channel 3"
depends on STM32_ADC3
select HAVE_ADC3_TIMER
---help---
Reserve TIM8 to trigger ADC3
endchoice
config HAVE_ADC1_TIMER
bool
config HAVE_ADC2_TIMER
bool
config HAVE_ADC3_TIMER
bool
config STM32_ADC1_SAMPLE_FREQUENCY
int "ADC1 Sampling Frequency"
default 100
depends on HAVE_ADC1_TIMER
---help---
ADC1 sampling frequency. Default: 100Hz
config STM32_ADC1_TIMTRIG
int "ADC1 Timer Trigger"
default 0
range 0 4
depends on HAVE_ADC1_TIMER
---help---
Values 0:CC1 1:CC2 2:CC3 3:CC4 4:TRGO
config STM32_ADC2_SAMPLE_FREQUENCY
int "ADC2 Sampling Frequency"
default 100
depends on HAVE_ADC2_TIMER
---help---
ADC2 sampling frequency. Default: 100Hz
config STM32_ADC2_TIMTRIG
int "ADC2 Timer Trigger"
default 0
range 0 4
depends on HAVE_ADC2_TIMER
---help---
Values 0:CC1 1:CC2 2:CC3 3:CC4 4:TRGO
config STM32_ADC3_SAMPLE_FREQUENCY
int "ADC3 Sampling Frequency"
default 100
depends on HAVE_ADC3_TIMER
---help---
ADC3 sampling frequency. Default: 100Hz
config STM32_ADC3_TIMTRIG
int "ADC3 Timer Trigger"
default 0
range 0 4
depends on HAVE_ADC3_TIMER
---help---
Values 0:CC1 1:CC2 2:CC3 3:CC4 4:TRGO
config STM32_TIM1_DAC
bool "TIM1 DAC"
default n
depends on STM32_TIM1 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM1 DAC channel"
default STM32_TIM1_DAC1
depends on STM32_TIM1_DAC
config STM32_TIM1_DAC1
bool "TIM1 DAC channel 1"
---help---
Reserve TIM1 to trigger DAC1
config STM32_TIM1_DAC2
bool "TIM1 DAC channel 2"
---help---
Reserve TIM1 to trigger DAC2
endchoice
config STM32_TIM2_DAC
bool "TIM2 DAC"
default n
depends on STM32_TIM2 && STM32_DAC
---help---
Reserve timer 2 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM2 DAC channel"
default STM32_TIM2_DAC1
depends on STM32_TIM2_DAC
config STM32_TIM2_DAC1
bool "TIM2 DAC channel 1"
---help---
Reserve TIM2 to trigger DAC1
config STM32_TIM2_DAC2
bool "TIM2 DAC channel 2"
---help---
Reserve TIM2 to trigger DAC2
endchoice
config STM32_TIM3_DAC
bool "TIM3 DAC"
default n
depends on STM32_TIM3 && STM32_DAC
---help---
Reserve timer 3 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM3 DAC channel"
default STM32_TIM3_DAC1
depends on STM32_TIM3_DAC
config STM32_TIM3_DAC1
bool "TIM3 DAC channel 1"
---help---
Reserve TIM3 to trigger DAC1
config STM32_TIM3_DAC2
bool "TIM3 DAC channel 2"
---help---
Reserve TIM3 to trigger DAC2
endchoice
config STM32_TIM4_DAC
bool "TIM4 DAC"
default n
depends on STM32_TIM4 && STM32_DAC
---help---
Reserve timer 4 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM4 DAC channel"
default STM32_TIM4_DAC1
depends on STM32_TIM4_DAC
config STM32_TIM4_DAC1
bool "TIM4 DAC channel 1"
---help---
Reserve TIM4 to trigger DAC1
config STM32_TIM4_DAC2
bool "TIM4 DAC channel 2"
---help---
Reserve TIM4 to trigger DAC2
endchoice
config STM32_TIM5_DAC
bool "TIM5 DAC"
default n
depends on STM32_TIM5 && STM32_DAC
---help---
Reserve timer 5 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM5 DAC channel"
default STM32_TIM5_DAC1
depends on STM32_TIM5_DAC
config STM32_TIM5_DAC1
bool "TIM5 DAC channel 1"
---help---
Reserve TIM5 to trigger DAC1
config STM32_TIM5_DAC2
bool "TIM5 DAC channel 2"
---help---
Reserve TIM5 to trigger DAC2
endchoice
config STM32_TIM6_DAC
bool "TIM6 DAC"
default n
depends on STM32_TIM6 && STM32_DAC
---help---
Reserve timer 6 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM6 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM6 DAC channel"
default STM32_TIM6_DAC1
depends on STM32_TIM6_DAC
config STM32_TIM6_DAC1
bool "TIM6 DAC channel 1"
---help---
Reserve TIM6 to trigger DAC1
config STM32_TIM6_DAC2
bool "TIM6 DAC channel 2"
---help---
Reserve TIM6 to trigger DAC2
endchoice
config STM32_TIM7_DAC
bool "TIM7 DAC"
default n
depends on STM32_TIM7 && STM32_DAC
---help---
Reserve timer 7 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM7 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM7 DAC channel"
default STM32_TIM7_DAC1
depends on STM32_TIM7_DAC
config STM32_TIM7_DAC1
bool "TIM7 DAC channel 1"
---help---
Reserve TIM7 to trigger DAC1
config STM32_TIM7_DAC2
bool "TIM7 DAC channel 2"
---help---
Reserve TIM7 to trigger DAC2
endchoice
config STM32_TIM8_DAC
bool "TIM8 DAC"
default n
depends on STM32_TIM8 && STM32_DAC
---help---
Reserve timer 8 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM8 DAC channel"
default STM32_TIM8_DAC1
depends on STM32_TIM8_DAC
config STM32_TIM8_DAC1
bool "TIM8 DAC channel 1"
---help---
Reserve TIM8 to trigger DAC1
config STM32_TIM8_DAC2
bool "TIM8 DAC channel 2"
---help---
Reserve TIM8 to trigger DAC2
endchoice
config STM32_TIM9_DAC
bool "TIM9 DAC"
default n
depends on STM32_TIM9 && STM32_DAC
---help---
Reserve timer 9 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM9 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM9 DAC channel"
default STM32_TIM9_DAC1
depends on STM32_TIM9_DAC
config STM32_TIM9_DAC1
bool "TIM9 DAC channel 1"
---help---
Reserve TIM9 to trigger DAC1
config STM32_TIM9_DAC2
bool "TIM9 DAC channel 2"
---help---
Reserve TIM9 to trigger DAC2
endchoice
config STM32_TIM10_DAC
bool "TIM10 DAC"
default n
depends on STM32_TIM10 && STM32_DAC
---help---
Reserve timer 10 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM10 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM10 DAC channel"
default STM32_TIM10_DAC1
depends on STM32_TIM10_DAC
config STM32_TIM10_DAC1
bool "TIM10 DAC channel 1"
---help---
Reserve TIM10 to trigger DAC1
config STM32_TIM10_DAC2
bool "TIM10 DAC channel 2"
---help---
Reserve TIM10 to trigger DAC2
endchoice
config STM32_TIM11_DAC
bool "TIM11 DAC"
default n
depends on STM32_TIM11 && STM32_DAC
---help---
Reserve timer 11 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM11 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM11 DAC channel"
default STM32_TIM11_DAC1
depends on STM32_TIM11_DAC
config STM32_TIM11_DAC1
bool "TIM11 DAC channel 1"
---help---
Reserve TIM11 to trigger DAC1
config STM32_TIM11_DAC2
bool "TIM11 DAC channel 2"
---help---
Reserve TIM11 to trigger DAC2
endchoice
config STM32_TIM12_DAC
bool "TIM12 DAC"
default n
depends on STM32_TIM12 && STM32_DAC
---help---
Reserve timer 12 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM12 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM12 DAC channel"
default STM32_TIM12_DAC1
depends on STM32_TIM12_DAC
config STM32_TIM12_DAC1
bool "TIM12 DAC channel 1"
---help---
Reserve TIM12 to trigger DAC1
config STM32_TIM12_DAC2
bool "TIM12 DAC channel 2"
---help---
Reserve TIM12 to trigger DAC2
endchoice
config STM32_TIM13_DAC
bool "TIM13 DAC"
default n
depends on STM32_TIM13 && STM32_DAC
---help---
Reserve timer 13 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM13 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM13 DAC channel"
default STM32_TIM13_DAC1
depends on STM32_TIM13_DAC
config STM32_TIM13_DAC1
bool "TIM13 DAC channel 1"
---help---
Reserve TIM13 to trigger DAC1
config STM32_TIM13_DAC2
bool "TIM13 DAC channel 2"
---help---
Reserve TIM13 to trigger DAC2
endchoice
config STM32_TIM14_DAC
bool "TIM14 DAC"
default n
depends on STM32_TIM14 && STM32_DAC
---help---
Reserve timer 14 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM14 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM14 DAC channel"
default STM32_TIM14_DAC1
depends on STM32_TIM14_DAC
config STM32_TIM14_DAC1
bool "TIM14 DAC channel 1"
---help---
Reserve TIM14 to trigger DAC1
config STM32_TIM14_DAC2
bool "TIM14 DAC channel 2"
---help---
Reserve TIM14 to trigger DAC2
endchoice
config STM32_USART
bool
menu "U[S]ART Configuration"
depends on STM32_USART
config USART1_RS485
bool "RS-485 on USART1"
default n
depends on STM32_USART1
---help---
Enable RS-485 interface on USART1. Your board config will have to
provide GPIO_USART1_RS485_DIR pin definition. Currently it cannot be
used with USART1_RXDMA.
config USART1_RS485_DIR_POLARITY
int "USART1 RS-485 DIR pin polarity"
default 1
range 0 1
depends on USART1_RS485
---help---
Polarity of DIR pin for RS-485 on USART1. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config USART1_RXDMA
bool "USART1 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART2_RS485
bool "RS-485 on USART2"
default n
depends on STM32_USART2
---help---
Enable RS-485 interface on USART2. Your board config will have to
provide GPIO_USART2_RS485_DIR pin definition. Currently it cannot be
used with USART2_RXDMA.
config USART2_RS485_DIR_POLARITY
int "USART2 RS-485 DIR pin polarity"
default 1
range 0 1
depends on USART2_RS485
---help---
Polarity of DIR pin for RS-485 on USART2. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config USART2_RXDMA
bool "USART2 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART3_RS485
bool "RS-485 on USART3"
default n
depends on STM32_USART3
---help---
Enable RS-485 interface on USART3. Your board config will have to
provide GPIO_USART3_RS485_DIR pin definition. Currently it cannot be
used with USART3_RXDMA.
config USART3_RS485_DIR_POLARITY
int "USART3 RS-485 DIR pin polarity"
default 1
range 0 1
depends on USART3_RS485
---help---
Polarity of DIR pin for RS-485 on USART3. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config USART3_RXDMA
bool "USART3 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config UART4_RS485
bool "RS-485 on UART4"
default n
depends on STM32_UART4
---help---
Enable RS-485 interface on UART4. Your board config will have to
provide GPIO_UART4_RS485_DIR pin definition. Currently it cannot be
used with UART4_RXDMA.
config UART4_RS485_DIR_POLARITY
int "UART4 RS-485 DIR pin polarity"
default 1
range 0 1
depends on UART4_RS485
---help---
Polarity of DIR pin for RS-485 on UART4. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config UART4_RXDMA
bool "UART4 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config UART5_RS485
bool "RS-485 on UART5"
default n
depends on STM32_UART5
---help---
Enable RS-485 interface on UART5. Your board config will have to
provide GPIO_UART5_RS485_DIR pin definition. Currently it cannot be
used with UART5_RXDMA.
config UART5_RS485_DIR_POLARITY
int "UART5 RS-485 DIR pin polarity"
default 1
range 0 1
depends on UART5_RS485
---help---
Polarity of DIR pin for RS-485 on UART5. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config UART5_RXDMA
bool "UART5 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART6_RS485
bool "RS-485 on USART6"
default n
depends on STM32_USART6
---help---
Enable RS-485 interface on USART6. Your board config will have to
provide GPIO_USART6_RS485_DIR pin definition. Currently it cannot be
used with USART6_RXDMA.
config USART6_RS485_DIR_POLARITY
int "USART6 RS-485 DIR pin polarity"
default 1
range 0 1
depends on USART6_RS485
---help---
Polarity of DIR pin for RS-485 on USART6. Set to state on DIR pin which
enables TX (0 - low / nTXEN, 1 - high / TXEN).
config USART6_RXDMA
bool "USART6 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config SERIAL_TERMIOS
bool "Serial driver TERMIOS supported"
depends on STM32_USART1 || STM32_USART2 || STM32_USART3 || STM32_UART4 || STM32_UART5 || STM32_USART6
default n
---help---
Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
If this is not defined, then the terminal settings (baud, parity, etc).
are not configurable at runtime; serial streams cannot be flushed, etc..
endmenu
config STM32_USART_SINGLEWIRE
bool "Single Wire Support"
default n
depends on STM32_USART
---help---
Enable single wire UART support. The option enables support for the
TIOCSSINGLEWIRE ioctl in the STM32 serial driver.
menu "SPI Configuration"
depends on STM32_SPI
config STM32_SPI_INTERRUPTS
bool "Interrupt driver SPI"
default n
---help---
Select to enable interrupt driven SPI support. Non-interrupt-driven,
poll-waiting is recommended if the interrupt rate would be to high in
the interrupt driven case.
config STM32_SPI_DMA
bool "SPI DMA"
default n
---help---
Use DMA to improve SPI transfer performance. Cannot be used with STM32_SPI_INTERRUPT.
endmenu
menu "I2C Configuration"
depends on STM32_I2C
config STM32_I2C_DYNTIMEO
bool "Use dynamic timeouts"
default n
depends on STM32_I2C
config STM32_I2C_DYNTIMEO_USECPERBYTE
int "Timeout Microseconds per Byte"
default 500
depends on STM32_I2C_DYNTIMEO
config STM32_I2C_DYNTIMEO_STARTSTOP
int "Timeout for Start/Stop (Milliseconds)"
default 1000
depends on STM32_I2C_DYNTIMEO
config STM32_I2CTIMEOSEC
int "Timeout seconds"
default 0
depends on STM32_I2C
config STM32_I2CTIMEOMS
int "Timeout Milliseconds"
default 500
depends on STM32_I2C && !STM32_I2C_DYNTIMEO
config STM32_I2CTIMEOTICKS
int "Timeout for Done and Stop (ticks)"
default 500
depends on STM32_I2C && !STM32_I2C_DYNTIMEO
config STM32_I2C_DUTY16_9
bool "Frequency with Tlow/Thigh = 16/9 "
default n
depends on STM32_I2C
endmenu
menu "SDIO Configuration"
depends on STM32_SDIO
config SDIO_DMA
bool "Support DMA data transfers"
default y if STM32_DMA2
depends on STM32_DMA2
---help---
Support DMA data transfers. Requires STM32_SDIO and config STM32_DMA2.
config SDIO_PRI
hex "SDIO interrupt priority"
default 128
---help---
Select SDIO interrupt prority. Default: 128.
config SDIO_DMAPRIO
hex "SDIO DMA priority"
default 0x00001000
---help---
Select SDIO DMA prority. Options: 0x00000000 low, 0x00001000 medium,
0x00002000 high, 0x00003000 very high. Default: medium.
config SDIO_WIDTH_D1_ONLY
bool "Use D1 only"
default n
---help---
Select 1-bit transfer mode. Default: 4-bit transfer mode.
endmenu
if STM32_ETHMAC
menu "Ethernet MAC configuration"
config STM32_PHYADDR
int "PHY address"
default 1
---help---
The 5-bit address of the PHY on the board. Default: 1
config STM32_PHYINIT
bool "Board-specific PHY Initialization"
default n
---help---
Some boards require specialized initialization of the PHY before it can be used.
This may include such things as configuring GPIOs, resetting the PHY, etc. If
STM32_PHYINIT is defined in the configuration then the board specific logic must
provide stm32_phyinitialize(); The STM32 Ethernet driver will call this function
one time before it first uses the PHY.
config STM32_MII
bool "Use MII interface"
default n
---help---
Support Ethernet MII interface.
choice
prompt "MII clock configuration"
default STM32_MII_MCO if STM32_STM32F10XX
default STM32_MII_MCO1 if STM32_STM32F20XX || STM32_STM32F40XX
depends on STM32_MII
config STM32_MII_MCO
bool "Use MC0 as MII clock"
depends on STM32_STM32F10XX
---help---
Use MCO to clock the MII interface. Default: Use MC0
config STM32_MII_MCO1
bool "Use MC01 as MII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO1 to clock the MII interface. Default: Use MC01
config STM32_MII_MCO2
bool "Use MC02 as MII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO2 to clock the MII interface. Default: Use MC01
config STM32_MII_EXTCLK
bool "External MII clock"
---help---
Clocking is provided by external logic. Don't use MCO for MII
clock. Default: Use MC0[1]
endchoice
config STM32_AUTONEG
bool "Use autonegotiation"
default y
---help---
Use PHY autonegotiation to determine speed and mode
config STM32_ETHFD
bool "Full duplex"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select full duplex
mode. Default: half-duplex
config STM32_ETH100MBPS
bool "100 Mbps"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select 100 MBps
speed. Default: 10 Mbps
config STM32_PHYSR
int "PHY Status Register Address (decimal)"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. The PHY status register
address may diff from PHY to PHY. This configuration sets the address of
the PHY status register.
config STM32_PHYSR_ALTCONFIG
bool "PHY Status Alternate Bit Layout"
default n
depends on STM32_AUTONEG
---help---
Different PHYs present speed and mode information in different ways. Some
will present separate information for speed and mode (this is the default).
Those PHYs, for example, may provide a 10/100 Mbps indication and a separate
full/half duplex indication. This options selects an alternative representation
where speed and mode information are combined. This might mean, for example,
separate bits for 10HD, 100HD, 10FD and 100FD.
config STM32_PHYSR_SPEED
hex "PHY Speed Mask"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides bit mask
for isolating the 10 or 100MBps speed indication.
config STM32_PHYSR_100MBPS
hex "PHY 100Mbps Speed Value"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the value
of the speed bit(s) indicating 100MBps speed.
config STM32_PHYSR_MODE
hex "PHY Mode Mask"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provide bit mask
for isolating the full or half duplex mode bits.
config STM32_PHYSR_FULLDUPLEX
hex "PHY Full Duplex Mode Value"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the
value of the mode bits indicating full duplex mode.
config STM32_PHYSR_ALTMODE
hex "PHY Mode Mask"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provide bit mask
for isolating the speed and full/half duplex mode bits.
config STM32_PHYSR_10HD
hex "10MHz/Half Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 10Mbps, half duplex setting.
config STM32_PHYSR_100HD
hex "100MHz/Half Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 100Mbps, half duplex setting.
config STM32_PHYSR_10FD
hex "10MHz/Full Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 10Mbps, full duplex setting.
config STM32_PHYSR_100FD
hex "100MHz/Full Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 100Mbps, full duplex setting.
config STM32_ETH_PTP
bool "Precision Time Protocol (PTP)"
default n
---help---
Precision Time Protocol (PTP). Not supported but some hooks are indicated
with this condition.
config STM32_RMII
bool
default y if !STM32_MII
choice
prompt "RMII clock configuration"
default STM32_RMII_MCO if STM32_STM32F10XX
default STM32_RMII_MCO1 if STM32_STM32F20XX || STM32_STM32F40XX
depends on STM32_RMII
config STM32_RMII_MCO
bool "Use MC0 as RMII clock"
depends on STM32_STM32F10XX
---help---
Use MCO to clock the RMII interface. Default: Use MC0
config STM32_RMII_MCO1
bool "Use MC01 as RMII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO1 to clock the RMII interface. Default: Use MC01
config STM32_RMII_MCO2
bool "Use MC02 as RMII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO2 to clock the RMII interface. Default: Use MC01
config STM32_RMII_EXTCLK
bool "External RMII clock"
---help---
Clocking is provided by external logic. Don't use MCO for RMII
clock. Default: Use MC0[1]
endchoice
config STM32_ETHMAC_REGDEBUG
bool "Register-Level Debug"
default n
depends on DEBUG
---help---
Enable very low-level register access debug. Depends on DEBUG.
endmenu
endif
menu "USB Host Configuration"
config STM32_OTGFS_RXFIFO_SIZE
int "Rx Packet Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the RX FIFO in 32-bit words. Default 128 (512 bytes)
config STM32_OTGFS_NPTXFIFO_SIZE
int "Non-periodic Tx FIFO Size"
default 96
depends on USBHOST && STM32_OTGFS
---help---
Size of the non-periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_PTXFIFO_SIZE
int "Periodic Tx FIFO size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_DESCSIZE
int "Descriptor Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Maximum size to allocate for descriptor memory descriptor. Default: 128
config STM32_OTGFS_SOFINTR
bool "Enable SOF interrupts"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable SOF interrupts. Why would you ever want to do that?
config STM32_USBHOST_REGDEBUG
bool "Register-Level Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable very low-level register access debug. Depends on DEBUG.
config STM32_USBHOST_PKTDUMP
bool "Packet Dump Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Dump all incoming and outgoing USB packets. Depends on DEBUG.
endmenu