/************************************************************************************
* arch/arm/src/stm32/chip.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_CHIP_H
#define __ARCH_ARM_SRC_STM32_CHIP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Get customizations for each supported chip and provide alternate function pin-mapping
*
* NOTE: Each GPIO pin may serve either for general purpose I/O or for a special
* alternate function (such as USART, CAN, USB, SDIO, etc.). That particular
* pin-mapping will depend on the package and STM32 family. If you are incorporating
* a new STM32 chip into NuttX, you will need to add the pin-mapping to a header file
* and to include that header file below. The chip-specific pin-mapping is defined in
* the chip datasheet.
*/
#if defined(CONFIG_ARCH_CHIP_STM32F103ZET6)
# undef CONFIG_STM32_LOWDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 16/32 Kbytes */
# undef CONFIG_STM32_MEDIUMDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 64/128 Kbytes */
# define CONFIG_STM32_HIGHDENSITY 1 /* STM32F101x and STM32F103x w/ 256/512 Kbytes */
# undef CONFIG_STM32_CONNECTIVITYLINE /* STM32F105x and STM32F107x */
# define STM32_NATIM 1 /* One advanced timer TIM1 */
# define STM32_NGTIM 4 /* General timers TIM2,3,4,5 */
# define STM32 NBTIM 0 /* No basic timers */
# define STM32_NDMA 2 /* DMA1-2 */
# define STM32_NSPI 2 /* SPI1-2 */
# define STM32_NUSART 3 /* USART1-3 */
# define STM32_NI2C 2 /* I2C1-2 */
# define STM32_NCAN 1 /* bxCAN1 */
# define STM32_NSDIO 1 /* SDIO */
# define STM32_NGPIO 112 /* GPIOA-G */
# define STM32_NADC 1 /* ADC1 */
# define STM32_NDAC 0 /* No DAC */
# define STM32_NCRC 0 /* No CRC */
# define STM32_NTHERNET 0 /* No ethernet */
# include "chip/stm32f103ze_pinmap.h"
#elif defined(CONFIG_ARCH_CHIP_STM32F103RET6)
# undef CONFIG_STM32_LOWDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 16/32 Kbytes */
# undef CONFIG_STM32_MEDIUMDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 64/128 Kbytes */
# define CONFIG_STM32_HIGHDENSITY 1 /* STM32F101x and STM32F103x w/ 256/512 Kbytes */
# undef CONFIG_STM32_CONNECTIVITYLINE /* STM32F105x and STM32F107x */
# define STM32_NATIM 2 /* Two advanced timers TIM1 and TIM8 */
# define STM32_NGTIM 4 /* General timers TIM2,3,4,5 */
# define STM32_NBTIM 2 /* Two basic timers TIM6 and TIM7 */
# define STM32_NDMA 2 /* DMA1-2 */
# define STM32_NSPI 3 /* SPI1-3 */
# define STM32_NUSART 5 /* USART1-5 */
# define STM32_NI2C 2 /* I2C1-2 */
# define STM32_NCAN 1 /* bxCAN1 */
# define STM32_NSDIO 1 /* SDIO */
# define STM32_NGPIO 51 /* GPIOA-D */
# define STM32_NADC 2 /* ADC1-2 */
# define STM32_NDAC 2 /* DAC1-2 */
# define STM32_NCRC 1 /* CRC */
# define STM32_NTHERNET 0 /* No ethernet */
# include "chip/stm32f103re_pinmap.h"
#elif defined(CONFIG_ARCH_CHIP_STM32F107VC)
# undef CONFIG_STM32_LOWDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 16/32 Kbytes */
# undef CONFIG_STM32_MEDIUMDENSITY /* STM32F101x, STM32F102x and STM32F103x w/ 64/128 Kbytes */
# undef CONFIG_STM32_HIGHDENSITY /* STM32F101x and STM32F103x w/ 256/512 Kbytes */
# define CONFIG_STM32_CONNECTIVITYLINE 1 /* STM32F105x and STM32F107x */
# define STM32_NATIM 1 /* One advanced timers TIM1 */
# define STM32_NGTIM 4 /* General timers TIM2,3,4,5 */
# define STM32 NBTIM 2 /* Two basic timers, TIM6-7 */
# define STM32_NDMA 2 /* DMA1-2 */
# define STM32_NSPI 3 /* SPI1-3 I2S1-2 */
# define STM32_NUSART 5 /* USART1-3, UART 4-5 */
# define STM32_NI2C 1 /* I2C1 */
# define STM32_NCAN 2 /* bxCAN1-2 */
# define STM32_NSDIO 0 /* No SDIO */
# define STM32_NGPIO 80 /* GPIOA-E */
# define STM32_NADC 2 /* ADC1-2*/
# define STM32_NDAC 2 /* DAC1-2 */
# define STM32_NCRC 1 /* CRC */
# define STM32_NTHERNET 1 /* 100/100 Ethernet MAC */
# include "chip/stm32f107vc_pinmap.h"
#else
# error "Unsupported STM32 chip"
#endif
/* Include only the memory map.
* Other chip hardware files should then include this file for the proper setup
*/
#include "chip/stm32_memorymap.h"
#endif /* __ARCH_ARM_SRC_STM32_CHIP_H */
