|
|
/************************************************************************************
* arch/arm/src/stm32/chip/stm32f10xx_rcc.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32F10XXX_RCC_H
#define __ARCH_ARM_SRC_STM32_CHIP_STM32F10XXX_RCC_H
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define STM32_RCC_CR_OFFSET 0x0000 /* Clock control register */
#define STM32_RCC_CFGR_OFFSET 0x0004 /* Clock configuration register */
#define STM32_RCC_CIR_OFFSET 0x0008 /* Clock interrupt register */
#define STM32_RCC_APB2RSTR_OFFSET 0x000c /* APB2 Peripheral reset register */
#define STM32_RCC_APB1RSTR_OFFSET 0x0010 /* APB1 Peripheral reset register */
#define STM32_RCC_AHBENR_OFFSET 0x0014 /* AHB Peripheral Clock enable register */
#define STM32_RCC_APB2ENR_OFFSET 0x0018 /* APB2 Peripheral Clock enable register */
#define STM32_RCC_APB1ENR_OFFSET 0x001c /* APB1 Peripheral Clock enable register */
#define STM32_RCC_BDCR_OFFSET 0x0020 /* Backup domain control register */
#define STM32_RCC_CSR_OFFSET 0x0024 /* Control/status register */
#ifdef CONFIG_STM32_VALUELINE
# define STM32_RCC_CFGR2_OFFSET 0x002c /* Clock configuration register 2 */
#endif
/* Register Addresses ***************************************************************/
#define STM32_RCC_CR (STM32_RCC_BASE+STM32_RCC_CR_OFFSET)
#define STM32_RCC_CFGR (STM32_RCC_BASE+STM32_RCC_CFGR_OFFSET)
#define STM32_RCC_CIR (STM32_RCC_BASE+STM32_RCC_CIR_OFFSET)
#define STM32_RCC_APB2RSTR (STM32_RCC_BASE+STM32_RCC_APB2RSTR_OFFSET)
#define STM32_RCC_APB1RSTR (STM32_RCC_BASE+STM32_RCC_APB1RSTR_OFFSET)
#define STM32_RCC_AHBENR (STM32_RCC_BASE+STM32_RCC_AHBENR_OFFSET)
#define STM32_RCC_APB2ENR (STM32_RCC_BASE+STM32_RCC_APB2ENR_OFFSET)
#define STM32_RCC_APB1ENR (STM32_RCC_BASE+STM32_RCC_APB1ENR_OFFSET)
#define STM32_RCC_BDCR (STM32_RCC_BASE+STM32_RCC_BDCR_OFFSET)
#define STM32_RCC_CSR (STM32_RCC_BASE+STM32_RCC_CSR_OFFSET)
#ifdef CONFIG_STM32_VALUELINE
# define STM32_RCC_CFGR2 (STM32_RCC_BASE+STM32_RCC_CFGR2_OFFSET)
#endif
/* Register Bitfield Definitions ****************************************************/
/* Clock control register */
#define RCC_CR_HSION (1 << 0) /* Bit 0: Internal High Speed clock enable */
#define RCC_CR_HSIRDY (1 << 1) /* Bit 1: Internal High Speed clock ready flag */
#define RCC_CR_HSITRIM_SHIFT (3) /* Bits 7-3: Internal High Speed clock trimming */
#define RCC_CR_HSITRIM_MASK (0x1f << RCC_CR_HSITRIM_SHIFT)
#define RCC_CR_HSICAL_SHIFT (8) /* Bits 15-8: Internal High Speed clock Calibration */
#define RCC_CR_HSICAL_MASK (0xff << RCC_CR_HSICAL_SHIFT)
#define RCC_CR_HSEON (1 << 16) /* Bit 16: External High Speed clock enable */
#define RCC_CR_HSERDY (1 << 17) /* Bit 17: External High Speed clock ready flag */
#define RCC_CR_HSEBYP (1 << 18) /* Bit 18: External High Speed clock Bypass */
#define RCC_CR_CSSON (1 << 19) /* Bit 19: Clock Security System enable */
#define RCC_CR_PLLON (1 << 24) /* Bit 24: PLL enable */
#define RCC_CR_PLLRDY (1 << 25) /* Bit 25: PLL clock ready flag */
/* Clock configuration register */
#define RCC_CFGR_SW_SHIFT (0) /* Bits 1-0: System clock Switch */
#define RCC_CFGR_SW_MASK (3 << RCC_CFGR_SW_SHIFT)
# define RCC_CFGR_SW_HSI (0 << RCC_CFGR_SW_SHIFT) /* 00: HSI selected as system clock */
# define RCC_CFGR_SW_HSE (1 << RCC_CFGR_SW_SHIFT) /* 01: HSE selected as system clock */
# define RCC_CFGR_SW_PLL (2 << RCC_CFGR_SW_SHIFT) /* 10: PLL selected as system clock */
#define RCC_CFGR_SWS_SHIFT (2) /* Bits 3-2: System Clock Switch Status */
#define RCC_CFGR_SWS_MASK (3 << RCC_CFGR_SWS_SHIFT)
# define RCC_CFGR_SWS_HSI (0 << RCC_CFGR_SWS_SHIFT) /* 00: HSI oscillator used as system clock */
# define RCC_CFGR_SWS_HSE (1 << RCC_CFGR_SWS_SHIFT) /* 01: HSE oscillator used as system clock */
# define RCC_CFGR_SWS_PLL (2 << RCC_CFGR_SWS_SHIFT) /* 10: PLL used as system clock */
#define RCC_CFGR_HPRE_SHIFT (4) /* Bits 7-4: AHB prescaler */
#define RCC_CFGR_HPRE_MASK (0x0f << RCC_CFGR_HPRE_SHIFT)
# define RCC_CFGR_HPRE_SYSCLK (0 << RCC_CFGR_HPRE_SHIFT) /* 0xxx: SYSCLK not divided */
# define RCC_CFGR_HPRE_SYSCLKd2 (8 << RCC_CFGR_HPRE_SHIFT) /* 1000: SYSCLK divided by 2 */
# define RCC_CFGR_HPRE_SYSCLKd4 (9 << RCC_CFGR_HPRE_SHIFT) /* 1001: SYSCLK divided by 4 */
# define RCC_CFGR_HPRE_SYSCLKd8 (10 << RCC_CFGR_HPRE_SHIFT) /* 1010: SYSCLK divided by 8 */
# define RCC_CFGR_HPRE_SYSCLKd16 (11 << RCC_CFGR_HPRE_SHIFT) /* 1011: SYSCLK divided by 16 */
# define RCC_CFGR_HPRE_SYSCLKd64 (12 << RCC_CFGR_HPRE_SHIFT) /* 1100: SYSCLK divided by 64 */
# define RCC_CFGR_HPRE_SYSCLKd128 (13 << RCC_CFGR_HPRE_SHIFT) /* 1101: SYSCLK divided by 128 */
# define RCC_CFGR_HPRE_SYSCLKd256 (14 << RCC_CFGR_HPRE_SHIFT) /* 1110: SYSCLK divided by 256 */
# define RCC_CFGR_HPRE_SYSCLKd512 (15 << RCC_CFGR_HPRE_SHIFT) /* 1111: SYSCLK divided by 512 */
#define RCC_CFGR_PPRE1_SHIFT (8) /* Bits 10-8: APB Low speed prescaler (APB1) */
#define RCC_CFGR_PPRE1_MASK (7 << RCC_CFGR_PPRE1_SHIFT)
# define RCC_CFGR_PPRE1_HCLK (0 << RCC_CFGR_PPRE1_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE1_HCLKd2 (4 << RCC_CFGR_PPRE1_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE1_HCLKd4 (5 << RCC_CFGR_PPRE1_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE1_HCLKd8 (6 << RCC_CFGR_PPRE1_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE1_HCLKd16 (7 << RCC_CFGR_PPRE1_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_PPRE2_SHIFT (11) /* Bits 13-11: APB High speed prescaler (APB2) */
#define RCC_CFGR_PPRE2_MASK (7 << RCC_CFGR_PPRE2_SHIFT)
# define RCC_CFGR_PPRE2_HCLK (0 << RCC_CFGR_PPRE2_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE2_HCLKd2 (4 << RCC_CFGR_PPRE2_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE2_HCLKd4 (5 << RCC_CFGR_PPRE2_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE2_HCLKd8 (6 << RCC_CFGR_PPRE2_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE2_HCLKd16 (7 << RCC_CFGR_PPRE2_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_ADCPRE_SHIFT (14) /* Bits 15-14: ADC prescaler */
#define RCC_CFGR_ADCPRE_MASK (3 << RCC_CFGR_ADCPRE_SHIFT)
# define RCC_CFGR_PLCK2d2 (0 << RCC_CFGR_ADCPRE_SHIFT) /* 00: PLCK2 divided by 2 */
# define RCC_CFGR_PLCK2d4 (1 << RCC_CFGR_ADCPRE_SHIFT) /* 01: PLCK2 divided by 4 */
# define RCC_CFGR_PLCK2d6 (2 << RCC_CFGR_ADCPRE_SHIFT) /* 10: PLCK2 divided by 6 */
# define RCC_CFGR_PLCK2d8 (3 << RCC_CFGR_ADCPRE_SHIFT) /* 11: PLCK2 divided by 8 */
#define RCC_CFGR_PLLSRC (1 << 16) /* Bit 16: PLL entry clock source */
#define RCC_CFGR_PLLXTPRE (1 << 17) /* Bit 17: HSE divider for PLL entry */
#define RCC_CFGR_PLLMUL_SHIFT (18) /* Bits 21-18: PLL Multiplication Factor */
#define RCC_CFGR_PLLMUL_MASK (0x0f << RCC_CFGR_PLLMUL_SHIFT)
# define RCC_CFGR_PLLMUL_CLKx2 (0 << RCC_CFGR_PLLMUL_SHIFT) /* 0000: PLL input clock x 2 */
# define RCC_CFGR_PLLMUL_CLKx3 (1 << RCC_CFGR_PLLMUL_SHIFT) /* 0001: PLL input clock x 3 */
# define RCC_CFGR_PLLMUL_CLKx4 (2 << RCC_CFGR_PLLMUL_SHIFT) /* 0010: PLL input clock x 4 */
# define RCC_CFGR_PLLMUL_CLKx5 (3 << RCC_CFGR_PLLMUL_SHIFT) /* 0011: PLL input clock x 5 */
# define RCC_CFGR_PLLMUL_CLKx6 (4 << RCC_CFGR_PLLMUL_SHIFT) /* 0100: PLL input clock x 6 */
# define RCC_CFGR_PLLMUL_CLKx7 (5 << RCC_CFGR_PLLMUL_SHIFT) /* 0101: PLL input clock x 7 */
# define RCC_CFGR_PLLMUL_CLKx8 (6 << RCC_CFGR_PLLMUL_SHIFT) /* 0110: PLL input clock x 8 */
# define RCC_CFGR_PLLMUL_CLKx9 (7 << RCC_CFGR_PLLMUL_SHIFT) /* 0111: PLL input clock x 9 */
# define RCC_CFGR_PLLMUL_CLKx10 (8 << RCC_CFGR_PLLMUL_SHIFT) /* 1000: PLL input clock x 10 */
# define RCC_CFGR_PLLMUL_CLKx11 (9 << RCC_CFGR_PLLMUL_SHIFT) /* 1001: PLL input clock x 11 */
# define RCC_CFGR_PLLMUL_CLKx12 (10 << RCC_CFGR_PLLMUL_SHIFT) /* 1010: PLL input clock x 12 */
# define RCC_CFGR_PLLMUL_CLKx13 (11 << RCC_CFGR_PLLMUL_SHIFT) /* 1011: PLL input clock x 13 */
# define RCC_CFGR_PLLMUL_CLKx14 (12 << RCC_CFGR_PLLMUL_SHIFT) /* 1100: PLL input clock x 14 */
# define RCC_CFGR_PLLMUL_CLKx15 (13 << RCC_CFGR_PLLMUL_SHIFT) /* 1101: PLL input clock x 15 */
# define RCC_CFGR_PLLMUL_CLKx16 (14 << RCC_CFGR_PLLMUL_SHIFT) /* 111x: PLL input clock x 16 */
#define RCC_CFGR_USBPRE (1 << 22) /* Bit 22: USB prescaler */
#define RCC_CFGR_MCO_SHIFT (24) /* Bits 26-24: Microcontroller Clock Output */
#define RCC_CFGR_MCO_MASK (7 << RCC_CFGR_MCO_SHIFT)
# define RCC_CFGR_NOCLK (0 << RCC_CFGR_MCO_SHIFT) /* 0xx: No clock */
# define RCC_CFGR_SYSCLK (4 << RCC_CFGR_MCO_SHIFT) /* 100: System clock selected */
# define RCC_CFGR_INTCLK (5 << RCC_CFGR_MCO_SHIFT) /* 101: Internal 8 MHz RC oscillator clock selected */
# define RCC_CFGR_EXTCLK (6 << RCC_CFGR_MCO_SHIFT) /* 110: External 1-25 MHz oscillator clock selected */
# define RCC_CFGR_PLLCLKd2 (7 << RCC_CFGR_MCO_SHIFT) /* 111: PLL clock divided by 2 selected */
/* Clock interrupt register */
#define RCC_CIR_LSIRDYF (1 << 0) /* Bit 0: LSI Ready Interrupt flag */
#define RCC_CIR_LSERDYF (1 << 1) /* Bit 1: LSE Ready Interrupt flag */
#define RCC_CIR_HSIRDYF (1 << 2) /* Bit 2: HSI Ready Interrupt flag */
#define RCC_CIR_HSERDYF (1 << 3) /* Bit 3: HSE Ready Interrupt flag */
#define RCC_CIR_PLLRDYF (1 << 4) /* Bit 4: PLL Ready Interrupt flag */
#define RCC_CIR_CSSF (1 << 7) /* Bit 7: Clock Security System Interrupt flag */
#define RCC_CIR_LSIRDYIE (1 << 8) /* Bit 8: LSI Ready Interrupt Enable */
#define RCC_CIR_LSERDYIE (1 << 9) /* Bit 9: LSE Ready Interrupt Enable */
#define RCC_CIR_HSIRDYIE (1 << 10) /* Bit 10: HSI Ready Interrupt Enable */
#define RCC_CIR_HSERDYIE (1 << 11) /* Bit 11: HSE Ready Interrupt Enable */
#define RCC_CIR_PLLRDYIE (1 << 12) /* Bit 12: PLL Ready Interrupt Enable */
#define RCC_CIR_LSIRDYC (1 << 16) /* Bit 16: LSI Ready Interrupt Clear */
#define RCC_CIR_LSERDYC (1 << 17) /* Bit 17: LSE Ready Interrupt Clear */
#define RCC_CIR_HSIRDYC (1 << 18) /* Bit 18: HSI Ready Interrupt Clear */
#define RCC_CIR_HSERDYC (1 << 19) /* Bit 19: HSE Ready Interrupt Clear */
#define RCC_CIR_PLLRDYC (1 << 20) /* Bit 20: PLL Ready Interrupt Clear */
#define RCC_CIR_CSSC (1 << 23) /* Bit 23: Clock Security System Interrupt Clear */
/* APB2 Peripheral reset register */
#define RCC_APB2RSTR_AFIORST (1 << 0) /* Bit 0: Alternate Function I/O reset */
#define RCC_APB2RSTR_IOPARST (1 << 2) /* Bit 2: I/O port A reset */
#define RCC_APB2RSTR_IOPBRST (1 << 3) /* Bit 3: IO port B reset */
#define RCC_APB2RSTR_IOPCRST (1 << 4) /* Bit 4: IO port C reset */
#define RCC_APB2RSTR_IOPDRST (1 << 5) /* Bit 5: IO port D reset */
#define RCC_APB2RSTR_IOPERST (1 << 6) /* Bit 6: IO port E reset */
#define TCC_APB2RSTR_IOPFRST (1 << 7) /* Bit 7: IO port F reset */
#define TCC_APB2RSTR_IOPGRST (1 << 8) /* Bit 8: IO port G reset */
#define RCC_APB2RSTR_ADC1RST (1 << 9) /* Bit 9: ADC 1 interface reset */
#define RCC_APB2RSTR_ADC2RST (1 << 10) /* Bit 10: ADC 2 interface reset */
#define RCC_APB2RSTR_TIM1RST (1 << 11) /* Bit 11: TIM1 Timer reset */
#define RCC_APB2RSTR_SPI1RST (1 << 12) /* Bit 12: SPI 1 reset */
#define RCC_APB2RSTR_TIM8RST (1 << 13) /* Bit 13: TIM8 Timer reset */
#define RCC_APB2RSTR_USART1RST (1 << 14) /* Bit 14: USART1 reset */
#define RCC_APB2RSTR_ADC3RST (1 << 15) /* Bit 15: ADC3 interface reset */
/* APB1 Peripheral reset register */
#define RCC_APB1RSTR_TIM2RST (1 << 0) /* Bit 0: Timer 2 reset */
#define RCC_APB1RSTR_TIM3RST (1 << 1) /* Bit 1: Timer 3 reset */
#define RCC_APB1RSTR_TIM4RST (1 << 2) /* Bit 2: Timer 4 reset */
#define RCC_APB1RSTR_TIM5RST (1 << 3) /* Bit 3: Timer 5 reset */
#define RCC_APB1RSTR_TIM6RST (1 << 4) /* Bit 4: Timer 6 reset */
#define RCC_APB1RSTR_TIM7RST (1 << 5) /* Bit 5: Timer 7 reset */
#define RCC_APB1RSTR_WWDGRST (1 << 11) /* Bit 11: Window Watchdog reset */
#define RCC_APB1RSTR_SPI2RST (1 << 14) /* Bit 14: SPI 2 reset */
#define RCC_APB1RSTR_SPI3RST (1 << 15) /* Bit 15: SPI 3 reset */
#define RCC_APB1RSTR_USART2RST (1 << 17) /* Bit 17: USART 2 reset */
#define RCC_APB1RSTR_USART3RST (1 << 18) /* Bit 18: USART 3 reset */
#define RCC_APB1RSTR_UART4RST (1 << 19) /* Bit 19: UART 4 reset */
#define RCC_APB1RSTR_UART5RST (1 << 20) /* Bit 18: UART 5 reset */
#define RCC_APB1RSTR_I2C1RST (1 << 21) /* Bit 21: I2C 1 reset */
#define RCC_APB1RSTR_I2C2RST (1 << 22) /* Bit 22: I2C 2 reset */
#define RCC_APB1RSTR_USBRST (1 << 23) /* Bit 23: USB reset */
#define RCC_APB1RSTR_CAN1RST (1 << 25) /* Bit 25: CAN1 reset */
#define RCC_APB1RSTR_CAN2RST (1 << 26) /* Bit 26: CAN2 reset */
#define RCC_APB1RSTR_BKPRST (1 << 27) /* Bit 27: Backup interface reset */
#define RCC_APB1RSTR_PWRRST (1 << 28) /* Bit 28: Power interface reset */
#define RCC_APB1RSTR_DACRST (1 << 29) /* Bit 29: DAC interface reset */
/* AHB Peripheral Clock enable register */
#define RCC_AHBENR_DMA1EN (1 << 0) /* Bit 0: DMA1 clock enable */
#define RCC_AHBENR_DMA2EN (1 << 1) /* Bit 1: DMA2 clock enable */
#define RCC_AHBENR_SRAMEN (1 << 2) /* Bit 2: SRAM interface clock enable */
#define RCC_AHBENR_FLITFEN (1 << 4) /* Bit 4: FLITF clock enable */
#define RCC_AHBENR_CRCEN (1 << 6) /* Bit 6: CRC clock enable */
#define RCC_AHBENR_FSMCEN (1 << 8) /* Bit 8: FSMC clock enable */
#define RCC_AHBENR_SDIOEN (1 << 10) /* Bit 10: SDIO clock enable */
/* APB2 Peripheral Clock enable register */
#define RCC_APB2ENR_AFIOEN (1 << 0) /* Bit 0: Alternate Function I/O clock enable */
#define RCC_APB2ENR_IOPEN(n) (1 << ((n)+2))
#define RCC_APB2ENR_IOPAEN (1 << 2) /* Bit 2: I/O port A clock enable */
#define RCC_APB2ENR_IOPBEN (1 << 3) /* Bit 3: I/O port B clock enable */
#define RCC_APB2ENR_IOPCEN (1 << 4) /* Bit 4: I/O port C clock enable */
#define RCC_APB2ENR_IOPDEN (1 << 5) /* Bit 5: I/O port D clock enable */
#define RCC_APB2ENR_IOPEEN (1 << 6) /* Bit 6: I/O port E clock enable */
#define RCC_APB2ENR_IOPFEN (1 << 7) /* Bit 7: I/O port F clock enable */
#define RCC_APB2ENR_IOPGEN (1 << 8) /* Bit 8: I/O port G clock enable */
#define RCC_APB2ENR_ADC1EN (1 << 9) /* Bit 9: ADC 1 interface clock enable */
#define RCC_APB2ENR_ADC2EN (1 << 10) /* Bit 10: ADC 2 interface clock enable */
#define RCC_APB2ENR_TIM1EN (1 << 11) /* Bit 11: TIM1 Timer clock enable */
#define RCC_APB2ENR_SPI1EN (1 << 12) /* Bit 12: SPI 1 clock enable */
#define RCC_APB2ENR_TIM8EN (1 << 13) /* Bit 13: TIM8 Timer clock enable */
#define RCC_APB2ENR_USART1EN (1 << 14) /* Bit 14: USART1 clock enable */
#define RCC_APB2ENR_ADC3EN (1 << 15) /* Bit 14: ADC3 interface clock enable */
/* APB1 Peripheral Clock enable register */
#define RCC_APB1ENR_TIM2EN (1 << 0) /* Bit 0: Timer 2 clock enable */
#define RCC_APB1ENR_TIM3EN (1 << 1) /* Bit 1: Timer 3 clock enable */
#define RCC_APB1ENR_TIM4EN (1 << 2) /* Bit 2: Timer 4 clock enable */
#define RCC_APB1ENR_TIM5EN (1 << 3) /* Bit 3: Timer 5 clock enable */
#define RCC_APB1ENR_TIM6EN (1 << 4) /* Bit 4: Timer 6 clock enable */
#define RCC_APB1ENR_TIM7EN (1 << 5) /* Bit 5: Timer 7 clock enable */
#define RCC_APB1ENR_WWDGEN (1 << 11) /* Bit 11: Window Watchdog clock enable */
#define RCC_APB1ENR_SPI2EN (1 << 14) /* Bit 14: SPI 2 clock enable */
#define RCC_APB1ENR_SPI3EN (1 << 15) /* Bit 15: SPI 3 clock enable */
#define RCC_APB1ENR_USART2EN (1 << 17) /* Bit 17: USART 2 clock enable */
#define RCC_APB1ENR_USART3EN (1 << 18) /* Bit 18: USART 3 clock enable */
#define RCC_APB1ENR_UART4EN (1 << 19) /* Bit 19: UART 4 clock enable */
#define RCC_APB1ENR_UART5EN (1 << 20) /* Bit 20: UART 5 clock enable */
#define RCC_APB1ENR_I2C1EN (1 << 21) /* Bit 21: I2C 1 clock enable */
#define RCC_APB1ENR_I2C2EN (1 << 22) /* Bit 22: I2C 2 clock enable */
#define RCC_APB1ENR_USBEN (1 << 23) /* Bit 23: USB clock enable */
#define RCC_APB1ENR_CAN1EN (1 << 25) /* Bit 25: CAN1 clock enable */
#define RCC_APB1ENR_CAN2EN (1 << 26) /* Bit 25: CAN2 clock enable */
#define RCC_APB1ENR_BKPEN (1 << 27) /* Bit 27: Backup interface clock enable */
#define RCC_APB1ENR_PWREN (1 << 28) /* Bit 28: Power interface clock enable */
#define RCC_APB1ENR_DACEN (1 << 29) /* Bit 29: DAC interface clock enable */
/* Backup domain control register */
#define RCC_BDCR_BDRST (1 << 16) /* Bit 16: Backup domain software reset */
#define RCC_BDCR_RTCEN (1 << 15) /* Bit 15: RTC clock enable */
#define RCC_BDCR_RTCSEL_SHIFT (8) /* Bits 9:8: RTC clock source selection */
#define RCC_BDCR_RTCSEL_MASK (3 << RCC_BDCR_RTCSEL_SHIFT)
# define RCC_BDCR_RTCSEL_NOCLK (0 << RCC_BDCR_RTCSEL_SHIFT) /* 00: No clock */
# define RCC_BDCR_RTCSEL_LSE (1 << RCC_BDCR_RTCSEL_SHIFT) /* 01: LSE oscillator clock used as RTC clock */
# define RCC_BDCR_RTCSEL_LSI (2 << RCC_BDCR_RTCSEL_SHIFT) /* 10: LSI oscillator clock used as RTC clock */
# define RCC_BDCR_RTCSEL_HSE (3 << RCC_BDCR_RTCSEL_SHIFT) /* 11: HSE oscillator clock divided by 128 used as RTC clock */
#define RCC_BDCR_LSEBYP (1 << 2) /* Bit 2: External Low Speed oscillator Bypass */
#define RCC_BDCR_LSERDY (1 << 1) /* Bit 1: External Low Speed oscillator Ready */
#define RCC_BDCR_LSEON (1 << 0) /* Bit 0: External Low Speed oscillator enable */
/* Control/status register */
#define RCC_CSR_LSION (1 << 0) /* Bit 0: Internal Low Speed oscillator enable */
#define RCC_CSR_LSIRDY (1 << 1) /* Bit 1: Internal Low Speed oscillator Ready */
#define RCC_CSR_RMVF (1 << 24) /* Bit 24: Remove reset flag */
#define RCC_CSR_PINRSTF (1 << 26) /* Bit 26: PIN reset flag */
#define RCC_CSR_PORRSTF (1 << 27) /* Bit 27: POR/PDR reset flag */
#define RCC_CSR_SFTRSTF (1 << 28) /* Bit 28: Software Reset flag */
#define RCC_CSR_IWDGRSTF (1 << 29) /* Bit 29: Independent Watchdog reset flag */
#define RCC_CSR_WWDGRSTF (1 << 30) /* Bit 30: Window watchdog reset flag */
#define RCC_CSR_LPWRRSTF (1 << 31) /* Bit 31: Low-Power reset flag */
#ifdef CONFIG_STM32_VALUELINE
/* Clock configuration register 2 */
# define RCC_CFGR2_PREDIV1d1 0 /* HSE input not divided */
# define RCC_CFGR2_PREDIV1d2 1 /* HSE input divided by 2 */
# define RCC_CFGR2_PREDIV1d3 2 /* HSE input divided by 3 */
# define RCC_CFGR2_PREDIV1d4 3 /* HSE input divided by 4 */
# define RCC_CFGR2_PREDIV1d5 4 /* HSE input divided by 5 */
# define RCC_CFGR2_PREDIV1d6 5 /* HSE input divided by 6 */
# define RCC_CFGR2_PREDIV1d7 6 /* HSE input divided by 7 */
# define RCC_CFGR2_PREDIV1d8 7 /* HSE input divided by 8 */
# define RCC_CFGR2_PREDIV1d9 8 /* HSE input divided by 9 */
# define RCC_CFGR2_PREDIV1d10 9 /* HSE input divided by 10 */
# define RCC_CFGR2_PREDIV1d11 10 /* HSE input divided by 11 */
# define RCC_CFGR2_PREDIV1d12 11 /* HSE input divided by 12 */
# define RCC_CFGR2_PREDIV1d13 12 /* HSE input divided by 13 */
# define RCC_CFGR2_PREDIV1d14 13 /* HSE input divided by 14 */
# define RCC_CFGR2_PREDIV1d15 14 /* HSE input divided by 15 */
# define RCC_CFGR2_PREDIV1d16 15 /* HSE input divided by 16 */
#endif
#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32F10XXX_RCC_H */
|