/************************************************************************************
* arch/arm/src/stm32/chip/stm32f30xxx_vectors.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Pre-processor definitions
************************************************************************************/
/* This file is included by stm32_vectors.S. It provides the macro VECTOR that
* supplies each STM32F30xxx vector in terms of a (lower-case) ISR label and an
* (upper-case) IRQ number as defined in arch/arm/include/stm32/stm32f30xxx_irq.h.
* stm32_vectors.S will defined the VECTOR in different ways in order to generate
* the interrupt vectors and handlers in their final form.
*/
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 82 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 82
#else
VECTOR(stm32_wwdg, STM32_IRQ_WWDG) /* 0: Window Watchdog interrupt */
VECTOR(stm32_pvd, STM32_IRQ_PVD) /* 1: PVD through EXTI Line detection interrupt */
VECTOR(stm32_tamper, STM32_IRQ_TAMPER) /* 2: Tamper or Time stamp interrupt */
VECTOR(stm32_rtc_wkup, STM32_IRQ_RTC_WKUP) /* 3: RTC global interrupt */
VECTOR(stm32_flash, STM32_IRQ_FLASH) /* 4: Flash global interrupt */
VECTOR(stm32_rcc, STM32_IRQ_RCC) /* 5: RCC global interrupt */
VECTOR(stm32_exti0, STM32_IRQ_EXTI0) /* 6: EXTI Line 0 interrupt */
VECTOR(stm32_exti1, STM32_IRQ_EXTI1) /* 7: EXTI Line 1 interrupt */
VECTOR(stm32_exti2, STM32_IRQ_EXTI2) /* 8: EXTI Line 2 or TSC interrupt */
VECTOR(stm32_exti3, STM32_IRQ_EXTI3) /* 9: EXTI Line 3 interrupt */
VECTOR(stm32_exti4, STM32_IRQ_EXTI4) /* 10: EXTI Line 4 interrupt */
VECTOR(stm32_dma1ch1, STM32_IRQ_DMA1CH1) /* 11: DMA1 channel 1 global interrupt */
VECTOR(stm32_dma1ch2, STM32_IRQ_DMA1CH2) /* 12: DMA1 channel 2 global interrupt */
VECTOR(stm32_dma1ch3, STM32_IRQ_DMA1CH3) /* 13: DMA1 channel 3 global interrupt */
VECTOR(stm32_dma1ch4, STM32_IRQ_DMA1CH4) /* 14: DMA1 channel 4 global interrupt */
VECTOR(stm32_dma1ch5, STM32_IRQ_DMA1CH5) /* 15: DMA1 channel 5 global interrupt */
VECTOR(stm32_dma1ch6, STM32_IRQ_DMA1CH6) /* 16: DMA1 channel 6 global interrupt */
VECTOR(stm32_dma1ch7, STM32_IRQ_DMA1CH7) /* 17: DMA1 channel 7 global interrupt */
VECTOR(stm32_adc12, STM32_IRQ_ADC12) /* 18: ADC1/ADC2 global interrupt */
VECTOR(stm32_can1tx, STM32_IRQ_CAN1TX) /* 19: USB High Priority or CAN1 TX interrupts */
VECTOR(stm32_can1rx0, STM32_IRQ_CAN1RX0) /* 20: USB Low Priority or CAN1 RX0 interrupts*/
VECTOR(stm32_can1rx1, STM32_IRQ_CAN1RX1) /* 21: CAN1 RX1 interrupt */
VECTOR(stm32_can1sce, STM32_IRQ_CAN1SCE) /* 22: CAN1 SCE interrupt */
VECTOR(stm32_exti95, STM32_IRQ_EXTI95) /* 23: EXTI Line[9:5] interrupts */
VECTOR(stm32_tim1brk, STM32_IRQ_TIM1BRK) /* 24: TIM1 Break or TIM15 global interrupt */
VECTOR(stm32_tim1up, STM32_IRQ_TIM1UP) /* 25: TIM1 Update or TIM16 global interrupt */
VECTOR(stm32_tim1trgcom, STM32_IRQ_TIM1TRGCOM) /* 26: TIM1 Trigger or TIM17 global interrupt */
VECTOR(stm32_tim1cc, STM32_IRQ_TIM1CC) /* 27: TIM1 Capture Compare interrupt */
VECTOR(stm32_tim2, STM32_IRQ_TIM2) /* 28: TIM2 global interrupt */
VECTOR(stm32_tim3, STM32_IRQ_TIM3) /* 29: TIM3 global interrupt */
VECTOR(stm32_tim4, STM32_IRQ_TIM4) /* 30: TIM4 global interrupt */
VECTOR(stm32_i2c1ev, STM32_IRQ_I2C1EV) /* 31: I2C1 event or EXTI Line23 interrupt */
VECTOR(stm32_i2c1er, STM32_IRQ_I2C1ER) /* 32: I2C1 error interrupt */
VECTOR(stm32_i2c2ev, STM32_IRQ_I2C2EV) /* 33: I2C2 event or EXTI Line24 interrupt */
VECTOR(stm32_i2c2er, STM32_IRQ_I2C2ER) /* 34: I2C2 error interrupt */
VECTOR(stm32_spi1, STM32_IRQ_SPI1) /* 35: SPI1 global interrupt */
VECTOR(stm32_spi2, STM32_IRQ_SPI2) /* 36: SPI2 global interrupt */
VECTOR(stm32_usart1, STM32_IRQ_USART1) /* 37: USART1 global or EXTI Line 25 interrupt */
VECTOR(stm32_usart2, STM32_IRQ_USART2) /* 38: USART2 global or EXTI Line 26 interrupt */
VECTOR(stm32_usart3, STM32_IRQ_USART3) /* 39: USART3 global or EXTI Line 28 interrupt */
VECTOR(stm32_exti1510, STM32_IRQ_EXTI1510) /* 40: EXTI Line[15:10] interrupts */
VECTOR(stm32_rtcalrm, STM32_IRQ_RTCALRM) /* 41: RTC alarm through EXTI line interrupt */
VECTOR(stm32_ext18, STM32_IRQ_EXT18) /* 42: USB wakeup or EXTI Line 18 interrupt */
VECTOR(stm32_tim8brk, STM32_IRQ_TIM8BRK) /* 43: TIM8 Break interrupt */
VECTOR(stm32_tim8up, STM32_IRQ_TIM8UP) /* 44: TIM8 Update interrupt */
VECTOR(stm32_tim8trgcom, STM32_IRQ_TIM8TRGCOM) /* 45: TIM8 Trigger and Commutation interrupts */
VECTOR(stm32_tim8cc, STM32_IRQ_TIM8CC) /* 46: TIM8 Capture Compare interrupt */
VECTOR(stm32_adc3, STM32_IRQ_ADC3) /* 47: ADC3 global interrupt */
UNUSED(STM32_IRQ_RESERVED48) /* 48: Reserved */
UNUSED(STM32_IRQ_RESERVED49) /* 49: Reserved */
UNUSED(STM32_IRQ_RESERVED50) /* 50: Reserved */
VECTOR(stm32_spi3, STM32_IRQ_SPI3) /* 51: SPI3 global interrupt */
VECTOR(stm32_uart4, STM32_IRQ_UART4) /* 52: UART4 global or EXTI Line 34 interrupt */
VECTOR(stm32_uart5, STM32_IRQ_UART5) /* 53: UART5 global or EXTI Line 35 interrupt */
VECTOR(stm32_tim6, STM32_IRQ_TIM6) /* 54: TIM6 global or DAC1/2 underrun interrupts */
VECTOR(stm32_tim7, STM32_IRQ_TIM7) /* 55: TIM7 global interrupt */
VECTOR(stm32_dma2ch1, STM32_IRQ_DMA2CH1) /* 56: DMA2 channel 1 global interrupt */
VECTOR(stm32_dma2ch2, STM32_IRQ_DMA2CH2) /* 57: DMA2 channel 2 global interrupt */
VECTOR(stm32_dma2ch3, STM32_IRQ_DMA2CH3) /* 58: DMA2 channel 3 global interrupt */
VECTOR(stm32_dma2ch4, STM32_IRQ_DMA2CH4) /* 59: DMA2 channel 4 global interrupt */
VECTOR(stm32_dma2ch5, STM32_IRQ_DMA2CH5) /* 60: DMA2 channel 5 global interrupt */
VECTOR(stm32_adc4, STM32_IRQ_ADC4) /* 61: ADC4 global interrupt */
UNUSED(STM32_IRQ_RESERVED62) /* 62: Reserved */
UNUSED(STM32_IRQ_RESERVED63) /* 63: Reserved */
VECTOR(stm32_comp123, STM32_IRQ_COMP123) /* 64: COMP1-3 or EXTI Lines 21-2 and 29 interrupts */
VECTOR(stm32_comp456, STM32_IRQ_COMP456) /* 65: COMP4-6 or EXTI Lines 30-2 interrupts */
VECTOR(stm32_comp7, STM32_IRQ_COMP7) /* 66: COMP7 or EXTI Line 33 interrupt */
UNUSED(STM32_IRQ_RESERVED67) /* 67: Reserved */
UNUSED(STM32_IRQ_RESERVED68) /* 68: Reserved */
UNUSED(STM32_IRQ_RESERVED69) /* 69: Reserved */
UNUSED(STM32_IRQ_RESERVED70) /* 70: Reserved */
UNUSED(STM32_IRQ_RESERVED71) /* 71: Reserved */
UNUSED(STM32_IRQ_RESERVED72) /* 72: Reserved */
UNUSED(STM32_IRQ_RESERVED73) /* 73: Reserved */
VECTOR(stm32_usbhp, STM32_IRQ_USBHP_2) /* 74: USB High priority interrupt */
VECTOR(stm32_usblp, STM32_IRQ_USBLP_2) /* 75: USB Low priority interrupt */
VECTOR(stm32_usbwkup, STM32_IRQ_USBWKUP_2) /* 76: USB wakeup from suspend through EXTI line interrupt*/
UNUSED(STM32_IRQ_RESERVED77) /* 77: Reserved */
UNUSED(STM32_IRQ_RESERVED78) /* 78: Reserved */
UNUSED(STM32_IRQ_RESERVED79) /* 79: Reserved */
UNUSED(STM32_IRQ_RESERVED80) /* 80: Reserved */
VECTOR(stm32_fpu, STM32_IRQ_FPU) /* 81: FPU global interrupt */
#endif /* CONFIG_ARMV7M_CMNVECTOR */
