|
|
/************************************************************************************
* arch/arm/src/stm32/chip/stm32l15xx_rcc.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32L15XXX_RCC_H
#define __ARCH_ARM_SRC_STM32_CHIP_STM32L15XXX_RCC_H
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define STM32_RCC_CR_OFFSET 0x0000 /* Clock control register */
#define STM32_RCC_ICSCR_OFFSET 0x0004 /* Internal clock sources calibration register */
#define STM32_RCC_CFGR_OFFSET 0x0008 /* Clock configuration register */
#define STM32_RCC_CIR_OFFSET 0x000c /* Clock interrupt register */
#define STM32_RCC_AHBRSTR_OFFSET 0x0010 /* AHB Peripheral reset register */
#define STM32_RCC_APB2RSTR_OFFSET 0x0014 /* APB2 Peripheral reset register */
#define STM32_RCC_APB1RSTR_OFFSET 0x0018 /* APB1 Peripheral reset register */
#define STM32_RCC_AHBENR_OFFSET 0x001c /* AHB Peripheral Clock enable register */
#define STM32_RCC_APB2ENR_OFFSET 0x0020 /* APB2 Peripheral Clock enable register */
#define STM32_RCC_APB1ENR_OFFSET 0x0024 /* APB1 Peripheral Clock enable register */
#define STM32_RCC_AHBLPENR_OFFSET 0x0028 /* AHB peripheral clock enable in low power mode register */
#define STM32_RCC_APB2LPENR_OFFSET 0x002c /* APB2 peripheral clock enable in low power mode register */
#define STM32_RCC_APB1LPENR_OFFSET 0x0030 /* APB1 peripheral clock enable in low power mode register */
#define STM32_RCC_CSR_OFFSET 0x0034 /* Control/status register */
/* Register Addresses ***************************************************************/
#define STM32_RCC_CR (STM32_RCC_BASE+STM32_RCC_CR_OFFSET)
#define STM32_RCC_ICSCR (STM32_RCC_BASE+STM32_RCC_ICSCR_OFFSET)
#define STM32_RCC_CFGR (STM32_RCC_BASE+STM32_RCC_CFGR_OFFSET)
#define STM32_RCC_CIR (STM32_RCC_BASE+STM32_RCC_CIR_OFFSET)
#define STM32_RCC_AHBRSTR (STM32_RCC_BASE+STM32_RCC_AHBRSTR_OFFSET)
#define STM32_RCC_APB2RSTR (STM32_RCC_BASE+STM32_RCC_APB2RSTR_OFFSET)
#define STM32_RCC_APB1RSTR (STM32_RCC_BASE+STM32_RCC_APB1RSTR_OFFSET)
#define STM32_RCC_AHBENR (STM32_RCC_BASE+STM32_RCC_AHBENR_OFFSET)
#define STM32_RCC_APB2ENR (STM32_RCC_BASE+STM32_RCC_APB2ENR_OFFSET)
#define STM32_RCC_APB1ENR (STM32_RCC_BASE+STM32_RCC_APB1ENR_OFFSET)
#define STM32_RCC_AHBLPENR (STM32_RCC_BASE+STM32_RCC_AHBLPENR_OFFSET)
#define STM32_RCC_APB2LPENR (STM32_RCC_BASE+STM32_RCC_APB2LPENR_OFFSET)
#define STM32_RCC_APB1LPENR (STM32_RCC_BASE+STM32_RCC_APB1LPENR_OFFSET)
#define STM32_RCC_CSR (STM32_RCC_BASE+STM32_RCC_CSR_OFFSET)
/* Register Bitfield Definitions ****************************************************/
/* Clock control register */
#define RCC_CR_HSION (1 << 0) /* Bit 0: Internal high speed clock enable */
#define RCC_CR_HSIRDY (1 << 1) /* Bit 1: Internal high speed clock ready flag */
/* Bits 2-7: Reserved */
#define RCC_CR_MSION (1 << 8) /* Bit 8: MSI clock enable */
#define RCC_CR_MSIRDY (1 << 9) /* Bit 9: MSI clock ready flag */
/* Bits 10-15: Reserved */
#define RCC_CR_HSEON (1 << 16) /* Bit 16: External high speed clock enable */
#define RCC_CR_HSERDY (1 << 17) /* Bit 17: External high speed clock ready flag */
#define RCC_CR_HSEBYP (1 << 18) /* Bit 18: External high speed clock bypass */
/* Bits 19-23: Reserved */
#define RCC_CR_PLLON (1 << 24) /* Bit 24: PLL enable */
#define RCC_CR_PLLRDY (1 << 25) /* Bit 25: PLL clock ready flag */
/* Bits 26-27: Reserved */
#define RCC_CR_CSSON (1 << 28) /* Bit 16: Clock security system enable */
#define RCC_CR_RTCPRE_SHIFT (29) /* Bits 29-30: RTC/LCD prescaler */
#define RCC_CR_RTCPRE_MASK (3 << RCC_CR_RTCPRE_SHIFT)
/* Bit 31: Reserved */
#define RCC_CR_RSTVAL 0x00000300
/* Internal clock sources calibration register */
#define RCC_ICSCR_HSICAL_SHIFT (0) /* Bits 0-7: Internal high speed clock calibration */
#define RCC_ICSCR_HSICAL_MASK (0xff << RCC_ICSCR_HSICAL_SHIFT)
#define RCC_ICSCR_HSITRIM_SHIFT (8) /* Bits 8-12: High speed internal clock trimming */
#define RCC_ICSCR_HSITRIM_MASK (0x1f << RCC_ICSCR_HSITRIM_SHIFT)
#define RCC_ICSCR_MSIRANGE_SHIFT (13) /* Bits 13-15: MSI clock ranges */
#define RCC_ICSCR_MSIRANGE_MASK (7 << RCC_ICSCR_MSIRANGE_SHIFT)
# define RCC_ICSCR_MSIRANGE_0 (0 << RCC_ICSCR_MSIRANGE_SHIFT) /* 000: Range 0 around 65.536 kHz */
# define RCC_ICSCR_MSIRANGE_1 (1 << RCC_ICSCR_MSIRANGE_SHIFT) /* 001: Range 1 around 131.072 kHz */
# define RCC_ICSCR_MSIRANGE_2 (2 << RCC_ICSCR_MSIRANGE_SHIFT) /* 010: Range 2 around 262.144 kHz */
# define RCC_ICSCR_MSIRANGE_3 (3 << RCC_ICSCR_MSIRANGE_SHIFT) /* 011: Range 3 around 524.288 kHz */
# define RCC_ICSCR_MSIRANGE_4 (4 << RCC_ICSCR_MSIRANGE_SHIFT) /* 100: Range 4 around 1.048 MHz */
# define RCC_ICSCR_MSIRANGE_5 (5 << RCC_ICSCR_MSIRANGE_SHIFT) /* 101: Range 5 around 2.097 MHz (reset value) */
# define RCC_ICSCR_MSIRANGE_6 (6 << RCC_ICSCR_MSIRANGE_SHIFT) /* 110: Range 6 around 4.194 MHz */
#define RCC_ICSCR_MSICAL_SHIFT (16) /* Bits 16-23: MSI clock calibration */
#define RCC_ICSCR_MSICAL_MASK (0xff << RCC_ICSCR_MSICAL_SHIFT)
#define RCC_ICSCR_MSITRIM_SHIFT (24) /* Bits 24-31: MSI clock trimming */
#define RCC_ICSCR_MSITRIM_MASK (0xff << RCC_ICSCR_MSITRIM_SHIFT)
#define RCC_ICSR_RSTVAL 0x0000b000
/* Clock configuration register */
#define RCC_CFGR_SW_SHIFT (0) /* Bits 0-1: System clock Switch */
#define RCC_CFGR_SW_MASK (3 << RCC_CFGR_SW_SHIFT)
# define RCC_CFGR_SW_MSI (0 << RCC_CFGR_SW_SHIFT) /* 00: MSI selected as system clock */
# define RCC_CFGR_SW_HSI (1 << RCC_CFGR_SW_SHIFT) /* 01: HSI selected as system clock */
# define RCC_CFGR_SW_HSE (2 << RCC_CFGR_SW_SHIFT) /* 10: HSE selected as system clock */
# define RCC_CFGR_SW_PLL (3 << RCC_CFGR_SW_SHIFT) /* 11: PLL selected as system clock */
#define RCC_CFGR_SWS_SHIFT (2) /* Bits 2-3: System Clock Switch Status */
#define RCC_CFGR_SWS_MASK (3 << RCC_CFGR_SWS_SHIFT)
# define RCC_CFGR_SWS_MSI (0 << RCC_CFGR_SWS_SHIFT) /* 00: MSI oscillator used as system clock */
# define RCC_CFGR_SWS_HSI (1 << RCC_CFGR_SWS_SHIFT) /* 01: HSI oscillator used as system clock */
# define RCC_CFGR_SWS_HSE (2 << RCC_CFGR_SWS_SHIFT) /* 10: HSE oscillator used as system clock */
# define RCC_CFGR_SWS_PLL (3 << RCC_CFGR_SWS_SHIFT) /* 11: PLL used as system clock */
#define RCC_CFGR_HPRE_SHIFT (4) /* Bits 4-7: AHB prescaler */
#define RCC_CFGR_HPRE_MASK (0x0f << RCC_CFGR_HPRE_SHIFT)
# define RCC_CFGR_HPRE_SYSCLK (0 << RCC_CFGR_HPRE_SHIFT) /* 0xxx: SYSCLK not divided */
# define RCC_CFGR_HPRE_SYSCLKd2 (8 << RCC_CFGR_HPRE_SHIFT) /* 1000: SYSCLK divided by 2 */
# define RCC_CFGR_HPRE_SYSCLKd4 (9 << RCC_CFGR_HPRE_SHIFT) /* 1001: SYSCLK divided by 4 */
# define RCC_CFGR_HPRE_SYSCLKd8 (10 << RCC_CFGR_HPRE_SHIFT) /* 1010: SYSCLK divided by 8 */
# define RCC_CFGR_HPRE_SYSCLKd16 (11 << RCC_CFGR_HPRE_SHIFT) /* 1011: SYSCLK divided by 16 */
# define RCC_CFGR_HPRE_SYSCLKd64 (12 << RCC_CFGR_HPRE_SHIFT) /* 1100: SYSCLK divided by 64 */
# define RCC_CFGR_HPRE_SYSCLKd128 (13 << RCC_CFGR_HPRE_SHIFT) /* 1101: SYSCLK divided by 128 */
# define RCC_CFGR_HPRE_SYSCLKd256 (14 << RCC_CFGR_HPRE_SHIFT) /* 1110: SYSCLK divided by 256 */
# define RCC_CFGR_HPRE_SYSCLKd512 (15 << RCC_CFGR_HPRE_SHIFT) /* 1111: SYSCLK divided by 512 */
#define RCC_CFGR_PPRE1_SHIFT (8) /* Bits 18-10: APB Low speed prescaler (APB1) */
#define RCC_CFGR_PPRE1_MASK (7 << RCC_CFGR_PPRE1_SHIFT)
# define RCC_CFGR_PPRE1_HCLK (0 << RCC_CFGR_PPRE1_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE1_HCLKd2 (4 << RCC_CFGR_PPRE1_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE1_HCLKd4 (5 << RCC_CFGR_PPRE1_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE1_HCLKd8 (6 << RCC_CFGR_PPRE1_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE1_HCLKd16 (7 << RCC_CFGR_PPRE1_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_PPRE2_SHIFT (11) /* Bits 11-13: APB High speed prescaler (APB2) */
#define RCC_CFGR_PPRE2_MASK (7 << RCC_CFGR_PPRE2_SHIFT)
# define RCC_CFGR_PPRE2_HCLK (0 << RCC_CFGR_PPRE2_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE2_HCLKd2 (4 << RCC_CFGR_PPRE2_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE2_HCLKd4 (5 << RCC_CFGR_PPRE2_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE2_HCLKd8 (6 << RCC_CFGR_PPRE2_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE2_HCLKd16 (7 << RCC_CFGR_PPRE2_SHIFT) /* 111: HCLK divided by 16 */
/* Bits 14-15: Reserved */
#define RCC_CFGR_PLLSRC (1 << 16) /* Bit 16: PLL entry clock source */
/* Bit 17: Reserved */
#define RCC_CFGR_PLLMUL_SHIFT (18) /* Bits 18-21: PLL Multiplication Factor */
#define RCC_CFGR_PLLMUL_MASK (15 << RCC_CFGR_PLLMUL_SHIFT)
# define RCC_CFGR_PLLMUL_CLKx3 (0 << RCC_CFGR_PLLMUL_SHIFT) /* 0000: PLL clock entry x 3 */
# define RCC_CFGR_PLLMUL_CLKx4 (1 << RCC_CFGR_PLLMUL_SHIFT) /* 0001: PLL clock entry x 4 */
# define RCC_CFGR_PLLMUL_CLKx6 (2 << RCC_CFGR_PLLMUL_SHIFT) /* 0010: PLL clock entry x 6 */
# define RCC_CFGR_PLLMUL_CLKx8 (3 << RCC_CFGR_PLLMUL_SHIFT) /* 0011: PLL clock entry x 8 */
# define RCC_CFGR_PLLMUL_CLKx12 (4 << RCC_CFGR_PLLMUL_SHIFT) /* 0100: PLL clock entry x 12 */
# define RCC_CFGR_PLLMUL_CLKx16 (5 << RCC_CFGR_PLLMUL_SHIFT) /* 0101: PLL clock entry x 16 */
# define RCC_CFGR_PLLMUL_CLKx24 (6 << RCC_CFGR_PLLMUL_SHIFT) /* 0110: PLL clock entry x 24 */
# define RCC_CFGR_PLLMUL_CLKx32 (7 << RCC_CFGR_PLLMUL_SHIFT) /* 0111: PLL clock entry x 32 */
# define RCC_CFGR_PLLMUL_CLKx48 (8 << RCC_CFGR_PLLMUL_SHIFT) /* 1000: PLL clock entry x 48 */
#define RCC_CFGR_PLLDIV_SHIFT (22) /* Bits 22-23: PLL output division */
#define RCC_CFGR_PLLDIV_MASK (3 << RCC_CFGR_PLLDIV_SHIFT)
# define RCC_CFGR_PLLDIV_2 (1 << RCC_CFGR_PLLDIV_SHIFT) /* 01: PLL clock output = PLLVCO / 2 */
# define RCC_CFGR_PLLDIV_3 (2 << RCC_CFGR_PLLDIV_SHIFT) /* 10: PLL clock output = PLLVCO / 3 */
# define RCC_CFGR_PLLDIV_4 (3 << RCC_CFGR_PLLDIV_SHIFT) /* 11: PLL clock output = PLLVCO / 4 */
#define RCC_CFGR_MCOSEL_SHIFT (24) /* Bits 24-26: Microcontroller clock output selection */
#define RCC_CFGR_MCOSEL_MASK (7 << RCC_CFGR_MCOSEL_SHIFT)
# define RCC_CFGR_MCOSEL_DISABLED (0 << RCC_CFGR_MCOSEL_SHIFT) /* 000: MCO output disabled, no clock on MCO */
# define RCC_CFGR_MCOSEL_SYSCLK (1 << RCC_CFGR_MCOSEL_SHIFT) /* 001: SYSCLK clock selected */
# define RCC_CFGR_MCOSEL_HSICLK (2 << RCC_CFGR_MCOSEL_SHIFT) /* 010: HSI oscillator clock selected */
# define RCC_CFGR_MCOSEL_MSICLK (3 << RCC_CFGR_MCOSEL_SHIFT) /* 011: MSI oscillator clock selected */
# define RCC_CFGR_MCOSEL_HSECLK (4 << RCC_CFGR_MCOSEL_SHIFT) /* 100: HSE oscillator clock selected */
# define RCC_CFGR_MCOSEL_PLLCLK (5 << RCC_CFGR_MCOSEL_SHIFT) /* 101: PLL clock selected */
# define RCC_CFGR_MCOSEL_LSICLK (6 << RCC_CFGR_MCOSEL_SHIFT) /* 110: LSI oscillator clock selected */
# define RCC_CFGR_MCOSEL_LSECLK (7 << RCC_CFGR_MCOSEL_SHIFT) /* 111: LSE oscillator clock selected */
/* Bit 27: Reserved */
#define RCC_CFGR_MCOPRE_SHIFT (28) /* Bits 28-30: Microcontroller clock output selection */
#define RCC_CFGR_MCOPRE_MASK (7 << RCC_CFGR_MCOPRE_SHIFT)
# define RCC_CFGR_MCOPRE_DIV1 (0 << RCC_CFGR_MCOPRE_SHIFT) /* 000: MCO is divided by 1 */
# define RCC_CFGR_MCOPRE_DIV2 (1 << RCC_CFGR_MCOPRE_SHIFT) /* 001: MCO is divided by 2 */
# define RCC_CFGR_MCOPRE_DIV4 (2 << RCC_CFGR_MCOPRE_SHIFT) /* 010: MCO is divided by 4 */
# define RCC_CFGR_MCOPRE_DIV8 (3 << RCC_CFGR_MCOPRE_SHIFT) /* 011: MCO is divided by 8 */
# define RCC_CFGR_MCOPRE_DIV16 (4 << RCC_CFGR_MCOPRE_SHIFT) /* 100: MCO is divided by 16 */
/* Bit 31: Reserved */
#define RCC_CFGR_RESET 0x00000000
/* Clock interrupt register */
#define RCC_CIR_LSIRDYF (1 << 0) /* Bit 0: LSI ready interrupt flag */
#define RCC_CIR_LSERDYF (1 << 1) /* Bit 1: LSE ready interrupt flag */
#define RCC_CIR_HSIRDYF (1 << 2) /* Bit 2: HSI ready interrupt flag */
#define RCC_CIR_HSERDYF (1 << 3) /* Bit 3: HSE ready interrupt flag */
#define RCC_CIR_PLLRDYF (1 << 4) /* Bit 4: PLL ready interrupt flag */
#define RCC_CIR_MSIRDYF (1 << 5) /* Bit 5: MSI ready interrupt flag */
#define RCC_CIR_LSECSSF (1 << 6) /* Bit 6: LSE CSS Interrupt flag */
#define RCC_CIR_CSSF (1 << 7) /* Bit 7: Clock security system interrupt flag */
#define RCC_CIR_LSIRDYIE (1 << 8) /* Bit 8: LSI ready interrupt enable */
#define RCC_CIR_LSERDYIE (1 << 9) /* Bit 9: LSE ready interrupt enable */
#define RCC_CIR_HSIRDYIE (1 << 10) /* Bit 10: HSI ready interrupt enable */
#define RCC_CIR_HSERDYIE (1 << 11) /* Bit 11: HSE ready interrupt enable */
#define RCC_CIR_PLLRDYIE (1 << 12) /* Bit 12: PLL ready interrupt enable */
#define RCC_CIR_MSIRDYIE (1 << 13) /* Bit 13: MSI ready interrupt enable */
#define RCC_CIR_LSECSSIE (1 << 14) /* Bit 14: LSE CSS interrupt enable */
/* Bit 15: Reserved */
#define RCC_CIR_LSIRDYC (1 << 16) /* Bit 16: LSI ready interrupt clear */
#define RCC_CIR_LSERDYC (1 << 17) /* Bit 17: LSE ready interrupt clear */
#define RCC_CIR_HSIRDYC (1 << 18) /* Bit 18: HSI ready interrupt clear */
#define RCC_CIR_HSERDYC (1 << 19) /* Bit 19: HSE ready interrupt clear */
#define RCC_CIR_PLLRDYC (1 << 20) /* Bit 20: PLL ready interrupt clear */
#define RCC_CIR_MSIRDYC (1 << 21) /* Bit 21: MSI ready interrupt clear */
#define RCC_CIR_LSECSSC (1 << 22) /* Bit 22: LSE CSS interrupt clear */
#define RCC_CIR_CSSC (1 << 23) /* Bit 23: Clock Security system interrupt clear */
/* Bits 24-31: Reserved */
/* AHB peripheral clock reset register (RCC_AHBRSTR) */
#define RCC_AHBRSTR_GPIOPARST (1 << 0) /* Bit 0: I/O port A reset */
#define RCC_AHBRSTR_GPIOPBRST (1 << 1) /* Bit 1: I/O port B reset */
#define RCC_AHBRSTR_GPIOPCRST (1 << 2) /* Bit 2: I/O port C reset */
#define RCC_AHBRSTR_GPIOPDRST (1 << 3) /* Bit 3: I/O port D reset */
#define RCC_AHBRSTR_GPIOPERST (1 << 4) /* Bit 4: I/O port E reset */
#define RCC_AHBRSTR_GPIOPHRST (1 << 5) /* Bit 5: I/O port H reset */
#define RCC_AHBRSTR_GPIOPFRST (1 << 6) /* Bit 6: I/O port F reset */
#define RCC_AHBRSTR_GPIOPGRST (1 << 7) /* Bit 7: I/O port G reset */
/* Bits 8-11: Reserved */
#define RCC_AHBRSTR_CRCRST (1 << 12) /* Bit 12: CRC reset */
/* Bits 13-14: Reserved */
#define RCC_AHBRSTR_FLITFRST (1 << 15) /* Bit 15: FLITF reset */
/* Bits 16-23: Reserved */
#define RCC_AHBRSTR_DMA1RST (1 << 24) /* Bit 24: DMA1 reset */
#define RCC_AHBRSTR_DMA2RST (1 << 25) /* Bit 25: DMA2 reset */
/* Bit 26: Reserved */
#define RCC_AHBRSTR_AESRST (1 << 27) /* Bit 27: AES reset */
/* Bits 28-29: Reserved */
#define RCC_AHBRSTR_FSMCRST (1 << 30) /* Bit 30: FSMC reset */
/* Bit 31: Reserved */
/* APB2 Peripheral reset register */
#define RCC_APB2RSTR_SYSCFGRST (1 << 0) /* Bit 0: System configuration controller reset */
/* Bit 1: Reserved */
#define RCC_APB2RSTR_TIM9RST (1 << 2) /* Bit 2: TIM9 timer reset */
#define RCC_APB2RSTR_TIM10RST (1 << 3) /* Bit 3: TIM10 timer reset */
#define RCC_APB2RSTR_TIM11RST (1 << 4) /* Bit 4: TIM11 timer reset */
/* Bits 5-8: Reserved */
#define RCC_APB2RSTR_ADC1RST (1 << 9) /* Bit 9: ADC1 interface reset */
/* Bit 10: Reserved */
#define RCC_APB2RSTR_SDIORST (1 << 11) /* Bit 11: SDIO reset */
#define RCC_APB2RSTR_SPI1RST (1 << 12) /* Bit 12: SPI 1 reset */
/* Bit 13: Reserved */
#define RCC_APB2RSTR_USART1RST (1 << 14) /* Bit 14: USART1 reset */
/* Bits 15-31: Reserved */
/* APB1 Peripheral reset register */
#define RCC_APB1RSTR_TIM2RST (1 << 0) /* Bit 0: Timer 2 reset */
#define RCC_APB1RSTR_TIM3RST (1 << 1) /* Bit 1: Timer 3 reset */
#define RCC_APB1RSTR_TIM4RST (1 << 2) /* Bit 2: Timer 4 reset */
#define RCC_APB1RSTR_TIM5RST (1 << 3) /* Bit 3: Timer 5 reset */
#define RCC_APB1RSTR_TIM6RST (1 << 4) /* Bit 4: Timer 6 reset */
#define RCC_APB1RSTR_TIM7RST (1 << 5) /* Bit 5: Timer 7 reset */
/* Bits 6-8: Reserved */
#define RCC_APB1RSTR_LCDRST (1 << 9) /* Bit 9: LCD reset */
/* Bit 10: Reserved */
#define RCC_APB1RSTR_WWDGRST (1 << 11) /* Bit 11: Window Watchdog reset */
/* Bits 12-13: Reserved */
#define RCC_APB1RSTR_SPI2RST (1 << 14) /* Bit 14: SPI 2 reset */
#define RCC_APB1RSTR_SPI3RST (1 << 15) /* Bit 15: SPI 3 reset */
/* Bit 16: Reserved */
#define RCC_APB1RSTR_USART2RST (1 << 17) /* Bit 17: USART 2 reset */
#define RCC_APB1RSTR_USART3RST (1 << 18) /* Bit 18: USART 3 reset */
#define RCC_APB1RSTR_USART4RST (1 << 19) /* Bit 19: USART 4 reset */
#define RCC_APB1RSTR_USART5RST (1 << 20) /* Bit 20: USART 5 reset */
#define RCC_APB1RSTR_I2C1RST (1 << 21) /* Bit 21: I2C 1 reset */
#define RCC_APB1RSTR_I2C2RST (1 << 22) /* Bit 22: I2C 2 reset */
#define RCC_APB1RSTR_USBRST (1 << 23) /* Bit 23: USB reset */
/* Bits 24-27: Reserved */
#define RCC_APB1RSTR_PWRRST (1 << 28) /* Bit 28: Power interface reset */
#define RCC_APB1RSTR_DACRST (1 << 29) /* Bit 29: DAC interface reset */
/* Bit 30: Reserved */
#define RCC_APB1RSTR_COMPRST (1 << 31) /* Bit 31: COMP interface reset */
/* AHB Peripheral Clock enable register */
#define RCC_AHBENR_GPIOEN(n) (1 << (n))
#define RCC_AHBENR_GPIOPAEN (1 << 0) /* Bit 0: I/O port A clock enable */
#define RCC_AHBENR_GPIOPBEN (1 << 1) /* Bit 1: I/O port B clock enable */
#define RCC_AHBENR_GPIOPCEN (1 << 2) /* Bit 2: I/O port C clock enable */
#define RCC_AHBENR_GPIOPDEN (1 << 3) /* Bit 3: I/O port D clock enable */
#define RCC_AHBENR_GPIOPEEN (1 << 4) /* Bit 4: I/O port E clock enable */
#define RCC_AHBENR_GPIOPHEN (1 << 5) /* Bit 5: I/O port H clock enable */
#define RCC_AHBENR_GPIOPFEN (1 << 6) /* Bit 6: I/O port F clock enable */
#define RCC_AHBENR_GPIOPGEN (1 << 7) /* Bit 7: I/O port G clock enable */
/* Bits 8-11: Reserved */
#define RCC_AHBENR_CRCEN (1 << 12) /* Bit 12: CRC clock enable */
/* Bits 13-14: Reserved */
#define RCC_AHBENR_FLITFEN (1 << 15) /* Bit 15: FLITF clock enable */
/* Bits 16-23: Reserved */
#define RCC_AHBENR_DMA1EN (1 << 24) /* Bit 24: DMA1 clock enable */
#define RCC_AHBENR_DMA2EN (1 << 25) /* Bit 25: DMA2 clock enable */
/* Bit 26: Reserved */
#define RCC_AHBENR_AESEN (1 << 27) /* Bit 27: AES clock enable */
/* Bits 28-29: Reserved */
#define RCC_AHBENR_FSMCEN (1 << 30) /* Bit 30: FSMC clock enable */
/* Bit 31: Reserved */
/* APB2 Peripheral Clock enable register */
#define RCC_APB2ENR_SYSCFGEN (1 << 0) /* Bit 0: System configuration controller clock enable */
/* Bit 1: Reserved */
#define RCC_APB2ENR_TIM9EN (1 << 2) /* Bit 2: TIM9 timer clock enable */
#define RCC_APB2ENR_TIM10EN (1 << 3) /* Bit 3: TIM10 timer clock enable */
#define RCC_APB2ENR_TIM11EN (1 << 4) /* Bit 4: TIM11 timer clock enable */
/* Bits 5-8: Reserved */
#define RCC_APB2ENR_ADC1EN (1 << 9) /* Bit 9: ADC1 interface clock enable */
/* Bit 10: Reserved */
#define RCC_APB2ENR_SDIOEN (1 << 11) /* Bit 11: SDIO clock enable */
#define RCC_APB2ENR_SPI1EN (1 << 12) /* Bit 12: SPI 1 clock enable */
/* Bit 13: Reserved */
#define RCC_APB2ENR_USART1EN (1 << 14) /* Bit 14: USART1 clock enable */
/* Bits 15-31: Reserved */
/* APB1 Peripheral Clock enable register */
#define RCC_APB1ENR_TIM2EN (1 << 0) /* Bit 0: Timer 2 clock enable */
#define RCC_APB1ENR_TIM3EN (1 << 1) /* Bit 1: Timer 3 clock enable */
#define RCC_APB1ENR_TIM4EN (1 << 2) /* Bit 2: Timer 4 clock enable */
#define RCC_APB1ENR_TIM5EN (1 << 3) /* Bit 3: Timer 5 clock enable */
#define RCC_APB1ENR_TIM6EN (1 << 4) /* Bit 4: Timer 6 clock enable */
#define RCC_APB1ENR_TIM7EN (1 << 5) /* Bit 5: Timer 7 clock enable */
/* Bits 6-8: Reserved */
#define RCC_APB1ENR_LCDEN (1 << 9) /* Bit 9: LCD clock enable */
/* Bit 10: Reserved */
#define RCC_APB1ENR_WWDGEN (1 << 11) /* Bit 11: Window Watchdog clock enable */
/* Bits 12-13: Reserved */
#define RCC_APB1ENR_SPI2EN (1 << 14) /* Bit 14: SPI 2 clock enable */
#define RCC_APB1ENR_SPI3EN (1 << 15) /* Bit 15: SPI 3 clock enable */
/* Bit 16: Reserved */
#define RCC_APB1ENR_USART2EN (1 << 17) /* Bit 17: USART 2 clock enable */
#define RCC_APB1ENR_USART3EN (1 << 18) /* Bit 18: USART 3 clock enable */
#define RCC_APB1ENR_USART4EN (1 << 19) /* Bit 19: USART 4 clock enable */
#define RCC_APB1ENR_USART5EN (1 << 20) /* Bit 20: USART 5 clock enable */
#define RCC_APB1ENR_I2C1EN (1 << 21) /* Bit 21: I2C 1 clock enable */
#define RCC_APB1ENR_I2C2EN (1 << 22) /* Bit 22: I2C 2 clock enable */
#define RCC_APB1ENR_USBEN (1 << 23) /* Bit 23: USB clock enable */
/* Bits 24-27: Reserved */
#define RCC_APB1ENR_PWREN (1 << 28) /* Bit 28: Power interface clock enable */
#define RCC_APB1ENR_DACEN (1 << 29) /* Bit 29: DAC interface clock enable */
/* Bit 30: Reserved */
#define RCC_APB1ENR_COMPEN (1 << 31) /* Bit 31: COMP interface clock enable */
/* AHB peripheral clock enable in low power mode register */
#define RCC_AHBLPENR_GPIOPALPEN (1 << 0) /* Bit 0: I/O port A clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPBLPEN (1 << 1) /* Bit 1: I/O port B clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPCLPEN (1 << 2) /* Bit 2: I/O port C clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPDLPEN (1 << 3) /* Bit 3: I/O port D clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPELPEN (1 << 4) /* Bit 4: I/O port E clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPHLPEN (1 << 5) /* Bit 5: I/O port H clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPFLPEN (1 << 6) /* Bit 6: I/O port F clock enable during sleep mode */
#define RCC_AHBLPENR_GPIOPGLPEN (1 << 7) /* Bit 7: I/O port G clock enable during sleep mode */
/* Bits 8-11: Reserved */
#define RCC_AHBLPENR_CRCLPEN (1 << 12) /* Bit 12: CRC clock enable during sleep mode */
/* Bits 13-14: Reserved */
#define RCC_AHBLPENR_FLITFLPEN (1 << 15) /* Bit 15: FLITF clock enable during sleep mode */
#define RCC_AHBLPENR_SRAMLPEN (1 << 16) /* Bit 16: SRAM clock enable during sleep mode */
/* Bits 17-23: Reserved */
#define RCC_AHBLPENR_DMA1LPEN (1 << 24) /* Bit 24: DMA1 clock enable during sleep mode */
#define RCC_AHBLPENR_DMA2LPEN (1 << 25) /* Bit 25: DMA2 clock enable during sleep mode */
/* Bit 26: Reserved */
#define RCC_AHBLPENR_AESLPEN (1 << 27) /* Bit 27: AES clock enable during sleep mode */
/* Bits 28-29: Reserved */
#define RCC_AHBLPENR_FSMCLPEN (1 << 30) /* Bit 30: FSMC clock enable during sleep mode */
/* Bit 31: Reserved */
/* APB2 peripheral clock enable in low power mode register */
#define RCC_APB2LPENR_SYSCFGLPEN (1 << 0) /* Bit 0: System configuration controller clock enable during sleep mode */
/* Bit 1: Reserved */
#define RCC_APB2LPENR_TIM9LPEN (1 << 2) /* Bit 2: TIM9 timer clock enable during sleep mode */
#define RCC_APB2LPENR_TIM10LPEN (1 << 3) /* Bit 3: TIM10 timer clock enable during sleep mode */
#define RCC_APB2LPENR_TIM11LPEN (1 << 4) /* Bit 4: TIM11 timer clock enable during sleep mode */
/* Bits 5-8: Reserved */
#define RCC_APB2LPENR_ADC1LPEN (1 << 9) /* Bit 9: ADC1 interface clock enable during sleep mode */
/* Bit 10: Reserved */
#define RCC_APB2LPENR_SDIOLPEN (1 << 11) /* Bit 11: SDIO clock enable during sleep mode */
#define RCC_APB2LPENR_SPI1LPEN (1 << 12) /* Bit 12: SPI 1 clock enable during sleep mode */
/* Bit 13: Reserved */
#define RCC_APB2LPENR_USART1LPEN (1 << 14) /* Bit 14: USART1 clock enable during sleep mode */
/* Bits 15-31: Reserved */
/* APB1 peripheral clock enable in low power mode register */
#define RCC_APB1LPENR_TIM2LPEN (1 << 0) /* Bit 0: Timer 2 clock enable during sleep mode */
#define RCC_APB1LPENR_TIM3LPEN (1 << 1) /* Bit 1: Timer 3 clock enable during sleep mode */
#define RCC_APB1LPENR_TIM4LPEN (1 << 2) /* Bit 2: Timer 4 clock enable during sleep mode */
#define RCC_APB1LPENR_TIM5LPEN (1 << 3) /* Bit 3: Timer 5 clock enable during sleep mode */
#define RCC_APB1LPENR_TIM6LPEN (1 << 4) /* Bit 4: Timer 6 clock enable during sleep mode */
#define RCC_APB1LPENR_TIM7LPEN (1 << 5) /* Bit 5: Timer 7 clock enable during sleep mode */
/* Bits 6-8: Reserved */
#define RCC_APB1LPENR_LCDLPEN (1 << 9) /* Bit 9: LCD clock enable during sleep mode */
/* Bit 10: Reserved */
#define RCC_APB1LPENR_WWDGLPEN (1 << 11) /* Bit 11: Window Watchdog clock enable during sleep mode */
/* Bits 12-13: Reserved */
#define RCC_APB1LPENR_SPI2LPEN (1 << 14) /* Bit 14: SPI 2 clock enable during sleep mode */
#define RCC_APB1LPENR_SPI3LPEN (1 << 15) /* Bit 15: SPI 3 clock enable during sleep mode */
/* Bit 16: Reserved */
#define RCC_APB1LPENR_USART2LPEN (1 << 17) /* Bit 17: USART 2 clock enable during sleep mode */
#define RCC_APB1LPENR_USART3LPEN (1 << 18) /* Bit 18: USART 3 clock enable during sleep mode */
#define RCC_APB1LPENR_USART4LPEN (1 << 19) /* Bit 19: USART 4 clock enable during sleep mode */
#define RCC_APB1LPENR_USART5LPEN (1 << 20) /* Bit 20: USART 5 clock enable during sleep mode */
#define RCC_APB1LPENR_I2C1LPEN (1 << 21) /* Bit 21: I2C 1 clock enable during sleep mode */
#define RCC_APB1LPENR_I2C2LPEN (1 << 22) /* Bit 22: I2C 2 clock enable during sleep mode */
#define RCC_APB1LPENR_USBLPEN (1 << 23) /* Bit 23: USB clock enable during sleep mode */
/* Bits 24-27: Reserved */
#define RCC_APB1LPENR_PWRLPEN (1 << 28) /* Bit 28: Power interface clock enable during sleep mode */
#define RCC_APB1LPENR_DACLPEN (1 << 29) /* Bit 29: DAC interface clock enable during sleep mode */
/* Bit 30: Reserved */
#define RCC_APB1LPENR_COMPLPEN (1 << 31) /* Bit 31: COMP interface clock enable during sleep mode */
/* Control/status register */
#define RCC_CSR_LSION (1 << 0) /* Bit 0: Internal Low Speed oscillator enable */
#define RCC_CSR_LSIRDY (1 << 1) /* Bit 1: Internal Low Speed oscillator Ready */
/* Bits 2-7: Reserved */
#define RCC_CSR_LSEON (1 << 8) /* Bit 8: External Low Speed oscillator enable */
#define RCC_CSR_LSERDY (1 << 9) /* Bit 9: External Low Speed oscillator Ready */
#define RCC_CSR_LSEBYP (1 << 10) /* Bit 10: External low-speed oscillator bypass */
#define RCC_CSR_LSECSSON (1 << 11) /* Bit 11: CSS on LSE enable */
#define RCC_CSR_LSECSSD (1 << 12) /* Bit 12: CSS on LSE failure Detection */
/* Bits 13-15: Reserved */
#define RCC_CSR_RTCSEL_SHIFT (16) /* Bits 16-17: RTC and LCD clock source selection */
#define RCC_CSR_RTCSEL_MASK (3 << RCC_CSR_RTCSEL_SHIFT)
# define RCC_CSR_RTCSEL_NONE (0 << RCC_CSR_RTCSEL_SHIFT) /* 00: No clock */
# define RCC_CSR_RTCSEL_LSE (1 << RCC_CSR_RTCSEL_SHIFT) /* 01: LSE oscillator clock is RTC/LCD clock */
# define RCC_CSR_RTCSEL_LSI (2 << RCC_CSR_RTCSEL_SHIFT) /* 10: LSI oscillator clock is RTC/LCD clock */
# define RCC_CSR_RTCSEL_HSE (3 << RCC_CSR_RTCSEL_SHIFT) /* 11: Divided HSE oscillator clock is RTC/LCD clock */
#define RCC_CSR_RTCEN (1 << 22) /* Bit 22: RTC clock enable */
#define RCC_CSR_RTCRST (1 << 23) /* Bit 23: RTC software reset */
#define RCC_CSR_RMVF (1 << 24) /* Bit 24: Remove reset flag */
#define RCC_CSR_OBLRSTF (1 << 25) /* Bit 25: Option byte loader reset flag */
#define RCC_CSR_PINRSTF (1 << 26) /* Bit 26: PIN reset flag */
#define RCC_CSR_PORRSTF (1 << 27) /* Bit 27: POR/PDR reset flag */
#define RCC_CSR_SFTRSTF (1 << 28) /* Bit 28: Software Reset flag */
#define RCC_CSR_IWDGRSTF (1 << 29) /* Bit 29: Independent Watchdog reset flag */
#define RCC_CSR_WWDGRSTF (1 << 30) /* Bit 30: Window watchdog reset flag */
#define RCC_CSR_LPWRRSTF (1 << 31) /* Bit 31: Low-Power reset flag */
#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32L15XXX_RCC_H */
|
