/****************************************************************************
* arch/arm/src/stm32/stm32_adc.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Li Zhuoyi <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <errno.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/arch.h>
#include <nuttx/analog/adc.h>
#include "up_internal.h"
#include "up_arch.h"
#include "chip.h"
#include "stm32_internal.h"
#include "stm32_adc.h"
#ifdef CONFIG_ADC
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Up to 3 ADC interfaces are supported */
#if STM32_NADC < 3
# undef CONFIG_STM32_ADC3
#endif
#if STM32_NADC < 2
# undef CONFIG_STM32_ADC2
#endif
#if STM32_NADC < 1
# undef CONFIG_STM32_ADC1
#endif
#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
/****************************************************************************
* Private Types
****************************************************************************/
struct stm32_dev_s
{
int irq;
# warning "Missing logic"
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* ADC Interrupt Handler */
static int adc_interrupt(int irq, void *context);
/* ADC Driver Methods */
static void adc_reset(FAR struct adc_dev_s *dev);
static int adc_setup(FAR struct adc_dev_s *dev);
static void adc_shutdown(FAR struct adc_dev_s *dev);
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable);
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg);
static int adc_interrupt(int irq, void *context);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct adc_ops_s g_adcops =
{
.ao_reset = adc_reset,
.ao_setup = adc_setup,
.ao_shutdown = adc_shutdown,
.ao_rxint = adc_rxint,
.ao_ioctl = adc_ioctl,
};
#ifdef CONFIG_STM32_ADC1
static struct stm32_dev_s g_adcpriv1 =
{
#ifdef CONFIG_STM32_STM32F10XX
.irq = STM32_IRQ_ADC12;
#else
.irq = STM32_IRQ_ADC;
#endif
# warning "Missing logic"
};
static struct adc_dev_s g_adcdev1 =
{
.ad_ops = &g_adcops,
.ad_priv= &g_adcpriv1
};
#endif
#ifdef CONFIG_STM32_ADC2
static struct stm32_dev_s g_adcpriv2 =
{
#ifdef CONFIG_STM32_STM32F10XX
.irq = STM32_IRQ_ADC12;
#else
.irq = STM32_IRQ_ADC;
#endif
# warning "Missing logic"
};
static struct adc_dev_s g_adcdev2 =
{
.ad_ops = &g_adcops
.ad_priv= &g_adcpriv2
};
#endif
#ifdef CONFIG_STM32_ADC3
static struct stm32_dev_s g_adcpriv3 =
{
#ifdef CONFIG_STM32_STM32F10XX
.irq = STM32_IRQ_ADC3;
#else
.irq = STM32_IRQ_ADC;
#endif
# warning "Missing logic"
};
static struct adc_dev_s g_adcdev3 =
{
.ad_ops = &g_adcops,
.ad_priv= &g_adcpriv3
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: adc_interrupt
*
* Description:
* ADC interrupt handler.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static int adc_interrupt(int irq, void *context)
{
FAR struct stm32_dev_s *priv;
uint32_t regval;
/* Determine which ADC caused the interrupt */
# warning "Missing logic"
/* Handle the ADC interrupt */
# warning "Missing logic"
return OK;
}
/****************************************************************************
* Name: adc_reset
*
* Description:
* Reset the ADC device. Called early to initialize the hardware. This
* is called, before adc_setup() and on error conditions.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static void adc_reset(FAR struct adc_dev_s *dev)
{
FAR struct stm32_dev_s *priv = (FAR struct stm32_dev_s *)dev->ad_priv;
irqstate_t flags;
uint32_t regval;
flags = irqsave();
# warning "Missing logic"
irqrestore(flags);
}
/****************************************************************************
* Name: adc_setup
*
* Description:
* Configure the ADC. This method is called the first time that the ADC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching ADC interrupts. Interrupts
* are all disabled upon return.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static int adc_setup(FAR struct adc_dev_s *dev)
{
FAR struct stm32_dev_s *priv = (FAR struct stm32_dev_s *)dev->ad_priv;
int ret;
/* Attach the ADC interrupt */
ret = irq_attach(priv->irq, adc_interrupt);
if (ret == OK)
{
/* Initialize the ADC data structures */
#warning "Missing logic"
/* Enable the ADC interrupt */
up_enable_irq(priv->irq);
}
return ret;
}
/****************************************************************************
* Name: adc_shutdown
*
* Description:
* Disable the ADC. This method is called when the ADC device is closed.
* This method reverses the operation the setup method.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static void adc_shutdown(FAR struct adc_dev_s *dev)
{
FAR struct stm32_dev_s *priv = (FAR struct stm32_dev_s *)dev->ad_priv;
/* Disable ADC interrupts and detach the ADC interrupt handler */
up_disable_irq(priv->irq);
irq_detach(priv->irq);
/* Disable and reset the ADC module */
#warning "Missing logic"
}
/****************************************************************************
* Name: adc_rxint
*
* Description:
* Call to enable or disable RX interrupts.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable)
{
FAR struct stm32_dev_s *priv = (FAR struct stm32_dev_s *)dev->ad_priv;
if (enable)
{
#warning "Missing logic"
}
else
{
#warning "Missing logic"
}
}
/****************************************************************************
* Name: adc_ioctl
*
* Description:
* All ioctl calls will be routed through this method.
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg)
{
return -ENOTTY;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_adcinitialize
*
* Description:
* Initialize the adc
*
* Returned Value:
* Valid can device structure reference on succcess; a NULL on failure
*
****************************************************************************/
struct adc_dev_s *up_adcinitialize(int intf)
{
#ifdef CONFIG_STM32_ADC1
if (intf == 1)
{
return &g_adcdev1;
}
else
#endif
#ifdef CONFIG_STM32_ADC2
if (intf == 2)
{
return &g_adcdev2;
}
else
#endif
#ifdef CONFIG_STM32_ADC3
if (intf == 3)
{
return &g_adcdev3;
}
else
#endif
{
return NULL;
}
}
#endif /* CONFIG_STM32_ADC || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
#endif /* CONFIG_ADC */
