/************************************************************************************
* arch/arm/src/stm32/stm32_gpio.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Uros Platise <uros.platise@isotel.eu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_STM32_GPIO_H
#define __ARCH_ARM_SRC_STM32_STM32_GPIO_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
#include "chip.h"
#include "chip/stm32_gpio.h"
/************************************************************************************
* Pre-Processor Declarations
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/* Bit-encoded input to stm32_configgpio()
* These definitions could be replaced by 'enum' as a stm32_gpio_t data type.
*/
/* 16-bit Encoding:
* OFFS SX.. VPPP BBBB
*/
/* Output mode:
*
* O... .... .... ....
*/
#define GPIO_INPUT (1 << 15) /* Bit 15: 1=Input mode */
#define GPIO_OUTPUT (0) /* 0=Output or alternate function */
#define GPIO_ALT (0)
/* If the pin is a GPIO digital output, then this identifies the initial output value.
* If the pin is an input, this bit is overloaded to provide the qualifier to\
* distinquish input pull-up and -down:
*
* .... .... V... ....
*/
#define GPIO_OUTPUT_SET (1 << 7) /* Bit 7: If output, inital value of output */
#define GPIO_OUTPUT_CLEAR (0)
/* These bits set the primary function of the pin:
* .FF. .... .... ....
*/
#define GPIO_CNF_SHIFT 13 /* Bits 13-14: GPIO function */
#define GPIO_CNF_MASK (3 << GPIO_CNF_SHIFT)
# define GPIO_CNF_ANALOGIN (0 << GPIO_CNF_SHIFT) /* Analog input */
# define GPIO_CNF_INFLOAT (1 << GPIO_CNF_SHIFT) /* Input floating */
# define GPIO_CNF_INPULLUD (2 << GPIO_CNF_SHIFT) /* Input pull-up/down general bit, since up is composed of two parts */
# define GPIO_CNF_INPULLDWN (2 << GPIO_CNF_SHIFT) /* Input pull-down */
# define GPIO_CNF_INPULLUP ((2 << GPIO_CNF_SHIFT) | GPIO_OUTPUT_SET) /* Input pull-up */
# define GPIO_CNF_OUTPP (0 << GPIO_CNF_SHIFT) /* Output push-pull */
# define GPIO_CNF_OUTOD (1 << GPIO_CNF_SHIFT) /* Output open-drain */
# define GPIO_CNF_AFPP (2 << GPIO_CNF_SHIFT) /* Alternate function push-pull */
# define GPIO_CNF_AFOD (3 << GPIO_CNF_SHIFT) /* Alternate function open-drain */
/* Maximum frequency selection:
* ...S S... .... ....
*/
#define GPIO_MODE_SHIFT 11 /* Bits 11-12: GPIO frequency selection */
#define GPIO_MODE_MASK (3 << GPIO_MODE_SHIFT)
# define GPIO_MODE_INPUT (0 << GPIO_MODE_SHIFT) /* Input mode (reset state) */
# define GPIO_MODE_10MHz (1 << GPIO_MODE_SHIFT) /* Output mode, max speed 10 MHz */
# define GPIO_MODE_2MHz (2 << GPIO_MODE_SHIFT) /* Output mode, max speed 2 MHz */
# define GPIO_MODE_50MHz (3 << GPIO_MODE_SHIFT) /* Output mode, max speed 50 MHz */
/* External interrupt selection (GPIO inputs only):
* .... .X.. .... ....
*/
#define GPIO_EXTI (1 << 10) /* Bit 10: Configure as EXTI interrupt */
/* This identifies the GPIO port:
* .... .... .PPP ....
*/
#define GPIO_PORT_SHIFT 4 /* Bit 4-6: Port number */
#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT)
#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) /* GPIOA */
#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) /* GPIOB */
#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) /* GPIOC */
#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) /* GPIOD */
#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) /* GPIOE */
#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) /* GPIOF */
#define GPIO_PORTG (6 << GPIO_PORT_SHIFT) /* GPIOG */
/* This identifies the bit in the port:
* .... .... .... BBBB
*/
#define GPIO_PIN_SHIFT 0 /* Bits 0-3: GPIO number: 0-15 */
#define GPIO_PIN_MASK (15 << GPIO_PIN_SHIFT)
#define GPIO_PIN0 (0 << GPIO_PIN_SHIFT)
#define GPIO_PIN1 (1 << GPIO_PIN_SHIFT)
#define GPIO_PIN2 (2 << GPIO_PIN_SHIFT)
#define GPIO_PIN3 (3 << GPIO_PIN_SHIFT)
#define GPIO_PIN4 (4 << GPIO_PIN_SHIFT)
#define GPIO_PIN5 (5 << GPIO_PIN_SHIFT)
#define GPIO_PIN6 (6 << GPIO_PIN_SHIFT)
#define GPIO_PIN7 (7 << GPIO_PIN_SHIFT)
#define GPIO_PIN8 (8 << GPIO_PIN_SHIFT)
#define GPIO_PIN9 (9 << GPIO_PIN_SHIFT)
#define GPIO_PIN10 (10 << GPIO_PIN_SHIFT)
#define GPIO_PIN11 (11 << GPIO_PIN_SHIFT)
#define GPIO_PIN12 (12 << GPIO_PIN_SHIFT)
#define GPIO_PIN13 (13 << GPIO_PIN_SHIFT)
#define GPIO_PIN14 (14 << GPIO_PIN_SHIFT)
#define GPIO_PIN15 (15 << GPIO_PIN_SHIFT)
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_configgpio
*
* Description:
* Configure a GPIO pin based on bit-encoded description of the pin.
* Once it is configured as Alternative (GPIO_ALT|GPIO_CNF_AFPP|...)
* function, it must be unconfigured with stm32_unconfiggpio() with
* the same cfgset first before it can be set to non-alternative function.
*
* Returns:
* OK on success
* ERROR on invalid port, or when pin is locked as ALT function.
*
************************************************************************************/
EXTERN int stm32_configgpio(uint32_t cfgset);
/************************************************************************************
* Name: stm32_unconfiggpio
*
* Description:
* Unconfigure a GPIO pin based on bit-encoded description of the pin, set it
* into default HiZ state (and possibly mark it's unused) and unlock it whether
* it was previsouly selected as alternative function (GPIO_ALT|GPIO_CNF_AFPP|...).
*
* This is a safety function and prevents hardware from schocks, as unexpected
* write to the Timer Channel Output GPIO to fixed '1' or '0' while it should
* operate in PWM mode could produce excessive on-board currents and trigger
* over-current/alarm function.
*
* Returns:
* OK on success
* ERROR on invalid port
*
************************************************************************************/
EXTERN int stm32_unconfiggpio(uint32_t cfgset);
/************************************************************************************
* Name: stm32_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
************************************************************************************/
EXTERN void stm32_gpiowrite(uint32_t pinset, bool value);
/************************************************************************************
* Name: stm32_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
************************************************************************************/
EXTERN bool stm32_gpioread(uint32_t pinset);
/************************************************************************************
* Name: stm32_gpiosetevent
*
* Description:
* Sets/clears GPIO based event and interrupt triggers.
*
* Parameters:
* - pinset: gpio pin configuration
* - rising/falling edge: enables
* - event: generate event when set
* - func: when non-NULL, generate interrupt
*
* Returns:
* The previous value of the interrupt handler function pointer. This value may,
* for example, be used to restore the previous handler when multiple handlers are
* used.
*
************************************************************************************/
EXTERN xcpt_t stm32_gpiosetevent(uint32_t pinset, bool risingedge, bool fallingedge,
bool event, xcpt_t func);
/************************************************************************************
* Function: stm32_dumpgpio
*
* Description:
* Dump all GPIO registers associated with the provided base address
*
************************************************************************************/
#ifdef CONFIG_DEBUG
EXTERN int stm32_dumpgpio(uint32_t pinset, const char *msg);
#else
# define stm32_dumpgpio(p,m)
#endif
/************************************************************************************
* Function: stm32_gpioinit
*
* Description:
* Based on configuration within the .config file, it does:
* - Remaps positions of alternative functions.
*
* Typically called from stm32_start().
************************************************************************************/
EXTERN void stm32_gpioinit(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_STM32_STM32_GPIO_H */
