|
|
/************************************************************************************
* arch/arm/src/stm32/stm32_sdio.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_STM32_SDIO_H
#define __ARCH_ARM_SRC_STM32_STM32_SDIO_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include "chip.h"
#include "stm32_memorymap.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define STM32_SDIO_POWER_OFFSET 0x0000 /* SDIO power control register */
#define STM32_SDIO_CLKCR_OFFSET 0x0004 /* SDI clock control register */
#define STM32_SDIO_ARG_OFFSET 0x0008 /* SDIO argument register */
#define STM32_SDIO_CMD_OFFSET 0x000c /* SDIO command register */
#define STM32_SDIO_RESPCMD_OFFSET 0x0010 /* SDIO command response register */
#define STM32_SDIO_RESP_OFFSET(n) (0x0010+4*(n))
#define STM32_SDIO_RESP1_OFFSET 0x0014 /* SDIO response 1 register */
#define STM32_SDIO_RESP2_OFFSET 0x0018 /* SDIO response 2 register */
#define STM32_SDIO_RESP3_OFFSET 0x001c /* SDIO response 3 register */
#define STM32_SDIO_RESP4_OFFSET 0x0020 /* SDIO response 4 register */
#define STM32_SDIO_DTIMER_OFFSET 0x0024 /* SDIO data timer register */
#define STM32_SDIO_DLEN_OFFSET 0x0028 /* SDIO data length register */
#define STM32_SDIO_DCTRL_OFFSET 0x002c /* SDIO data control register */
#define STM32_SDIO_DCOUNT_OFFSET 0x0030 /* SDIO data counter register */
#define STM32_SDIO_STA_OFFSET 0x0034 /* SDIO status register */
#define STM32_SDIO_ICR_OFFSET 0x0038 /* SDIO interrupt clear register */
#define STM32_SDIO_MASK_OFFSET 0x003c /* SDIO mask register */
#define STM32_SDIO_FIFOCNT_OFFSET 0x0048 /* SDIO FIFO counter register */
#define STM32_SDIO_FIFO_OFFSET 0x0080 /* SDIO data FIFO register */
/* Register Addresses ***************************************************************/
#define STM32_SDIO_POWER (STM32_SDIO_BASE+STM32_SDIO_POWER_OFFSET)
#define STM32_SDIO_CLKCR (STM32_SDIO_BASE+STM32_SDIO_CLKCR_OFFSET)
#define STM32_SDIO_ARG (STM32_SDIO_BASE+STM32_SDIO_ARG_OFFSET)
#define STM32_SDIO_CMD (STM32_SDIO_BASE+STM32_SDIO_CMD_OFFSET)
#define STM32_SDIO_RESPCMD (STM32_SDIO_BASE+STM32_SDIO_RESPCMD_OFFSET)
#define STM32_SDIO_RESP(n) (STM32_SDIO_BASE+STM32_SDIO_RESP_OFFSET(n))
#define STM32_SDIO_RESP1 (STM32_SDIO_BASE+STM32_SDIO_RESP1_OFFSET)
#define STM32_SDIO_RESP2 (STM32_SDIO_BASE+STM32_SDIO_RESP2_OFFSET)
#define STM32_SDIO_RESP3 (STM32_SDIO_BASE+STM32_SDIO_RESP3_OFFSET)
#define STM32_SDIO_RESP4 (STM32_SDIO_BASE+STM32_SDIO_RESP4_OFFSET)
#define STM32_SDIO_DTIMER (STM32_SDIO_BASE+STM32_SDIO_DTIMER_OFFSET)
#define STM32_SDIO_DLEN (STM32_SDIO_BASE+STM32_SDIO_DLEN_OFFSET)
#define STM32_SDIO_DCTRL (STM32_SDIO_BASE+STM32_SDIO_DCTRL_OFFSET)
#define STM32_SDIO_DCOUNT (STM32_SDIO_BASE+STM32_SDIO_DCOUNT_OFFSET)
#define STM32_SDIO_STA (STM32_SDIO_BASE+STM32_SDIO_STA_OFFSET)
#define STM32_SDIO_ICR (STM32_SDIO_BASE+STM32_SDIO_ICR_OFFSET)
#define STM32_SDIO_MASK (STM32_SDIO_BASE+STM32_SDIO_MASK_OFFSET)
#define STM32_SDIO_FIFOCNT (STM32_SDIO_BASE+STM32_SDIO_FIFOCNT_OFFSET)
#define STM32_SDIO_FIFO (STM32_SDIO_BASE+STM32_SDIO_FIFO_OFFSET)
/* Bit-band (BB) base addresses ****************************************************/
#define STM32_SDIO_OFFSET (STM32_SDIO_BASE-STM32_PERIPH_BASE)
#define STM32_SDIO_POWER_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_POWER_OFFSET)<<5))
#define STM32_SDIO_CLKCR_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_CLKCR_OFFSET)<<5))
#define STM32_SDIO_ARG_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_ARG_OFFSET)<<5))
#define STM32_SDIO_CMD_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_CMD_OFFSET)<<5))
#define STM32_SDIO_RESPCMD_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESPCMD_OFFSET)<<5))
#define STM32_SDIO_RESP_BB(n) (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESP_OFFSET(n))<<5))
#define STM32_SDIO_RESP1_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESP1_OFFSET)<<5))
#define STM32_SDIO_RESP2_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESP2_OFFSET)<<5))
#define STM32_SDIO_RESP3_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESP3_OFFSET)<<5))
#define STM32_SDIO_RESP4_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_RESP4_OFFSET)<<5))
#define STM32_SDIO_DTIMER_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_DTIMER_OFFSET)<<5))
#define STM32_SDIO_DLEN_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_DLEN_OFFSET)<<5))
#define STM32_SDIO_DCTRL_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_DCTRL_OFFSET)<<5))
#define STM32_SDIO_DCOUNT_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_DCOUNT_OFFSET)<<5))
#define STM32_SDIO_STA_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_STA_OFFSET)<<5))
#define STM32_SDIO_ICR_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_ICR_OFFSET)<<5))
#define STM32_SDIO_MASK_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_MASK_OFFSET)<<5))
#define STM32_SDIO_FIFOCNT_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_FIFOCNT_OFFSET)<<5))
#define STM32_SDIO_FIFO_BB (STM32_PERIPHBB_BASE+((STM32_SDIO_OFFSET+STM32_SDIO_FIFO_OFFSET)<<5))
/* Register Bitfield Definitions ****************************************************/
#define SDIO_POWER_PWRCTRL_SHIFT (0) /* Bits 0-1: Power supply control bits */
#define SDIO_POWER_PWRCTRL_MASK (3 << SDIO_POWER_PWRCTRL_SHIFT)
# define SDIO_POWER_PWRCTRL_OFF (0 << SDIO_POWER_PWRCTRL_SHIFT) /* 00: Power-off: card clock stopped */
# define SDIO_POWER_PWRCTRL_PWRUP (2 << SDIO_POWER_PWRCTRL_SHIFT) /* 10: Reserved power-up */
# define SDIO_POWER_PWRCTRL_ON (3 << SDIO_POWER_PWRCTRL_SHIFT) /* 11: Power-on: card is clocked */
#define SDIO_POWER_RESET (0) /* Reset value */
#define SDIO_CLKCR_CLKDIV_SHIFT (0) /* Bits 7-0: Clock divide factor */
#define SDIO_CLKCR_CLKDIV_MASK (0xff << SDIO_CLKCR_CLKDIV_SHIFT)
#define SDIO_CLKCR_CLKEN (1 << 8) /* Bit 8: Clock enable bit */
#define SDIO_CLKCR_PWRSAV (1 << 9) /* Bit 9: Power saving configuration bit */
#define SDIO_CLKCR_BYPASS (1 << 10) /* Bit 10: Clock divider bypass enable bit */
#define SDIO_CLKCR_WIDBUS_SHIFT (11) /* Bits 12-11: Wide bus mode enable bits */
#define SDIO_CLKCR_WIDBUS_MASK (3 << SDIO_CLKCR_WIDBUS_SHIFT)
# define SDIO_CLKCR_WIDBUS_D1 (0 << SDIO_CLKCR_WIDBUS_SHIFT) /* 00: Default (SDIO_D0) */
# define SDIO_CLKCR_WIDBUS_D4 (1 << SDIO_CLKCR_WIDBUS_SHIFT) /* 01: 4-wide (SDIO_D[3:0]) */
# define SDIO_CLKCR_WIDBUS_D8 (2 << SDIO_CLKCR_WIDBUS_SHIFT) /* 10: 8-wide (SDIO_D[7:0]) */
#define SDIO_CLKCR_NEGEDGE (1 << 13) /* Bit 13: SDIO_CK dephasing selection bit */
#define SDIO_CLKCR_HWFC_EN (1 << 14) /* Bit 14: HW Flow Control enable */
#define SDIO_CLKCR_RESET (0) /* Reset value */
#define SDIO_ARG_RESET (0) /* Reset value */
#define SDIO_CLKCR_CLKEN_BB (STM32_SDIO_CLKCR_BB + (8 * 4))
#define SDIO_CLKCR_PWRSAV_BB (STM32_SDIO_CLKCR_BB + (9 * 4))
#define SDIO_CLKCR_BYPASS_BB (STM32_SDIO_CLKCR_BB + (10 * 4))
#define SDIO_CLKCR_NEGEDGE_BB (STM32_SDIO_CLKCR_BB + (13 * 4))
#define SDIO_CLKCR_HWFC_EN_BB (STM32_SDIO_CLKCR_BB + (14 * 4))
#define SDIO_CMD_CMDINDEX_SHIFT (0)
#define SDIO_CMD_CMDINDEX_MASK (0x3f << SDIO_CMD_CMDINDEX_SHIFT)
#define SDIO_CMD_WAITRESP_SHIFT (6) /* Bits 7-6: Wait for response bits */
#define SDIO_CMD_WAITRESP_MASK (3 << SDIO_CMD_WAITRESP_SHIFT)
# define SDIO_CMD_NORESPONSE (0 << SDIO_CMD_WAITRESP_SHIFT) /* 00/10: No response */
# define SDIO_CMD_SHORTRESPONSE (1 << SDIO_CMD_WAITRESP_SHIFT) /* 01: Short response */
# define SDIO_CMD_LONGRESPONSE (3 << SDIO_CMD_WAITRESP_SHIFT) /* 11: Long response */
#define SDIO_CMD_WAITINT (1 << 8) /* Bit 8: CPSM waits for interrupt request */
#define SDIO_CMD_WAITPEND (1 << 9) /* Bit 9: CPSM Waits for ends of data transfer */
#define SDIO_CMD_CPSMEN (1 << 10) /* Bit 10: Command path state machine enable */
#define SDIO_CMD_SUSPEND (1 << 11) /* Bit 11: SD I/O suspend command */
#define SDIO_CMD_ENDCMD (1 << 12) /* Bit 12: Enable CMD completion */
#define SDIO_CMD_NIEN (1 << 13) /* Bit 13: not Interrupt Enable */
#define SDIO_CMD_ATACMD (1 << 14) /* Bit 14: CE-ATA command */
#define SDIO_CMD_RESET (0) /* Reset value */
#define SDIO_CMD_WAITINT_BB (STM32_SDIO_CMD_BB + (8 * 4))
#define SDIO_CMD_WAITPEND_BB (STM32_SDIO_CMD_BB + (9 * 4))
#define SDIO_CMD_CPSMEN_BB (STM32_SDIO_CMD_BB + (10 * 4))
#define SDIO_CMD_SUSPEND_BB (STM32_SDIO_CMD_BB + (11 * 4))
#define SDIO_CMD_ENCMD_BB (STM32_SDIO_CMD_BB + (12 * 4))
#define SDIO_CMD_NIEN_BB (STM32_SDIO_CMD_BB + (13 * 4))
#define SDIO_CMD_ATACMD_BB (STM32_SDIO_CMD_BB + (14 * 4))
#define SDIO_RESPCMD_SHIFT (0)
#define SDIO_RESPCMD_MASK (0x3f << SDIO_RESPCMD_SHIFT)
#define SDIO_DTIMER_RESET (0) /* Reset value */
#define SDIO_DLEN_SHIFT (0)
#define SDIO_DLEN_MASK (0x01ffffff << SDIO_DLEN_SHIFT)
#define SDIO_DLEN_RESET (0) /* Reset value */
#define SDIO_DCTRL_DTEN (1 << 0) /* Bit 0: Data transfer enabled bit */
#define SDIO_DCTRL_DTDIR (1 << 1) /* Bit 1: Data transfer direction */
#define SDIO_DCTRL_DTMODE (1 << 2) /* Bit 2: Data transfer mode */
#define SDIO_DCTRL_DMAEN (1 << 3) /* Bit 3: DMA enable bit */
#define SDIO_DCTRL_DBLOCKSIZE_SHIFT (4) /* Bits 7-4: Data block size */
#define SDIO_DCTRL_DBLOCKSIZE_MASK (15 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_1BYTE (0 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_2BYTES (1 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_4BYTES (2 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_8BYTES (3 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_16BYTES (4 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_32BYTES (5 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_64BYTES (6 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_128BYTES (7 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_256BYTES (8 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_512BYTES (9 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_1KBYTE (10 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_2KBYTES (11 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_4KBYTES (12 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_8KBYTES (13 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
# define SDIO_DCTRL_16KBYTES (14 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_RWSTART (1 << 8) /* Bit 8: Read wait start */
#define SDIO_DCTRL_RWSTOP (1 << 9) /* Bit 9: Read wait stop */
#define SDIO_DCTRL_RWMOD (1 << 10) /* Bit 10: Read wait mode */
#define SDIO_DCTRL_SDIOEN (1 << 11) /* Bit 11: SD I/O enable functions */
#define SDIO_DCTRL_RESET (0) /* Reset value */
#define SDIO_DCTRL_DTEN_BB (STM32_SDIO_DCTRL_BB + (0 * 4))
#define SDIO_DCTRL_DTDIR_BB (STM32_SDIO_DCTRL_BB + (1 * 4))
#define SDIO_DCTRL_DTMODE_BB (STM32_SDIO_DCTRL_BB + (2 * 4))
#define SDIO_DCTRL_DMAEN_BB (STM32_SDIO_DCTRL_BB + (3 * 4))
#define SDIO_DCTRL_RWSTART_BB (STM32_SDIO_DCTRL_BB + (8 * 4))
#define SDIO_DCTRL_RWSTOP_BB (STM32_SDIO_DCTRL_BB + (9 * 4))
#define SDIO_DCTRL_RWMOD_BB (STM32_SDIO_DCTRL_BB + (10 * 4))
#define SDIO_DCTRL_SDIOEN_BB (STM32_SDIO_DCTRL_BB + (11 * 4))
#define SDIO_DATACOUNT_SHIFT (0)
#define SDIO_DATACOUNT_MASK (0x01ffffff << SDIO_DATACOUNT_SHIFT)
#define SDIO_STA_CCRCFAIL (1 << 0) /* Bit 0: Command response CRC fail */
#define SDIO_STA_DCRCFAIL (1 << 1) /* Bit 1: Data block CRC fail */
#define SDIO_STA_CTIMEOUT (1 << 2) /* Bit 2: Command response timeout */
#define SDIO_STA_DTIMEOUT (1 << 3) /* Bit 3: Data timeout */
#define SDIO_STA_TXUNDERR (1 << 4) /* Bit 4: Transmit FIFO underrun error */
#define SDIO_STA_RXOVERR (1 << 5) /* Bit 5: Received FIFO overrun error */
#define SDIO_STA_CMDREND (1 << 6) /* Bit 6: Command response received */
#define SDIO_STA_CMDSENT (1 << 7) /* Bit 7: Command sent */
#define SDIO_STA_DATAEND (1 << 8) /* Bit 8: Data end */
#define SDIO_STA_STBITERR (1 << 9) /* Bit 9: Start bit not detected */
#define SDIO_STA_DBCKEND (1 << 10) /* Bit 10: Data block sent/received */
#define SDIO_STA_CMDACT (1 << 11) /* Bit 11: Command transfer in progress */
#define SDIO_STA_TXACT (1 << 12) /* Bit 12: Data transmit in progress */
#define SDIO_STA_RXACT (1 << 13) /* Bit 13: Data receive in progress */
#define SDIO_STA_TXFIFOHE (1 << 14) /* Bit 14: Transmit FIFO half empty */
#define SDIO_STA_RXFIFOHF (1 << 15) /* Bit 15: Receive FIFO half full */
#define SDIO_STA_TXFIFOF (1 << 16) /* Bit 16: Transmit FIFO full */
#define SDIO_STA_RXFIFOF (1 << 17) /* Bit 17: Receive FIFO full */
#define SDIO_STA_TXFIFOE (1 << 18) /* Bit 18: Transmit FIFO empty */
#define SDIO_STA_RXFIFOE (1 << 19) /* Bit 19: Receive FIFO empty */
#define SDIO_STA_TXDAVL (1 << 20) /* Bit 20: Data available in transmit FIFO */
#define SDIO_STA_RXDAVL (1 << 21) /* Bit 21: Data available in receive FIFO */
#define SDIO_STA_SDIOIT (1 << 22) /* Bit 22: SDIO interrupt received */
#define SDIO_STA_CEATAEND (1 << 23) /* Bit 23: CMD6 CE-ATA command completion */
#define SDIO_ICR_CCRCFAILC (1 << 0) /* Bit 0: CCRCFAIL flag clear bit */
#define SDIO_ICR_DCRCFAILC (1 << 1) /* Bit 1: DCRCFAIL flag clear bit */
#define SDIO_ICR_CTIMEOUTC (1 << 2) /* Bit 2: CTIMEOUT flag clear bit */
#define SDIO_ICR_DTIMEOUTC (1 << 3) /* Bit 3: DTIMEOUT flag clear bit */
#define SDIO_ICR_TXUNDERRC (1 << 4) /* Bit 4: TXUNDERR flag clear bit */
#define SDIO_ICR_RXOVERRC (1 << 5) /* Bit 5: RXOVERR flag clear bit */
#define SDIO_ICR_CMDRENDC (1 << 6) /* Bit 6: CMDREND flag clear bit */
#define SDIO_ICR_CMDSENTC (1 << 7) /* Bit 7: CMDSENT flag clear bit */
#define SDIO_ICR_DATAENDC (1 << 8) /* Bit 8: DATAEND flag clear bit */
#define SDIO_ICR_STBITERRC (1 << 9) /* Bit 9: STBITERR flag clear bit */
#define SDIO_ICR_DBCKENDC (1 << 10) /* Bit 10: DBCKEND flag clear bit */
#define SDIO_ICR_SDIOITC (1 << 22) /* Bit 22: SDIOIT flag clear bit */
#define SDIO_ICR_CEATAENDC (1 << 23) /* Bit 23: CEATAEND flag clear bit */
#define SDIO_ICR_RESET 0x00c007ff
#define SDIO_ICR_STATICFLAGS 0x000005ff
#define SDIO_MASK_CCRCFAILIE (1 << 0) /* Bit 0: Command CRC fail interrupt enable */
#define SDIO_MASK_DCRCFAILIE (1 << 1) /* Bit 1: Data CRC fail interrupt enable */
#define SDIO_MASK_CTIMEOUTIE (1 << 2) /* Bit 2: Command timeout interrupt enable */
#define SDIO_MASK_DTIMEOUTIE (1 << 3) /* Bit 3: Data timeout interrupt enable */
#define SDIO_MASK_TXUNDERRIE (1 << 4) /* Bit 4: Tx FIFO underrun error interrupt enable */
#define SDIO_MASK_RXOVERRIE (1 << 5) /* Bit 5: Rx FIFO overrun error interrupt enable */
#define SDIO_MASK_CMDRENDIE (1 << 6) /* Bit 6: Command response received interrupt enable */
#define SDIO_MASK_CMDSENTIE (1 << 7) /* Bit 7: Command sent interrupt enable */
#define SDIO_MASK_DATAENDIE (1 << 8) /* Bit 8: Data end interrupt enable */
#define SDIO_MASK_STBITERRIE (1 << 9) /* Bit 9: Start bit error interrupt enable */
#define SDIO_MASK_DBCKENDIE (1 << 10) /* Bit 10: Data block end interrupt enable */
#define SDIO_MASK_CMDACTIE (1 << 11) /* Bit 11: Command acting interrupt enable */
#define SDIO_MASK_TXACTIE (1 << 12) /* Bit 12: Data transmit acting interrupt enable */
#define SDIO_MASK_RXACTIE (1 << 13) /* Bit 13: Data receive acting interrupt enable */
#define SDIO_MASK_TXFIFOHEIE (1 << 14) /* Bit 14: Tx FIFO half empty interrupt enable */
#define SDIO_MASK_RXFIFOHFIE (1 << 15) /* Bit 15: Rx FIFO half full interrupt enable */
#define SDIO_MASK_TXFIFOFIE (1 << 16) /* Bit 16: Tx FIFO full interrupt enable */
#define SDIO_MASK_RXFIFOFIE (1 << 17) /* Bit 17: Rx FIFO full interrupt enable */
#define SDIO_MASK_TXFIFOEIE (1 << 18) /* Bit 18: Tx FIFO empty interrupt enable */
#define SDIO_MASK_RXFIFOEIE (1 << 19) /* Bit 19: Rx FIFO empty interrupt enable */
#define SDIO_MASK_TXDAVLIE (1 << 20) /* Bit 20: Data available in Tx FIFO interrupt enable */
#define SDIO_MASK_RXDAVLIE (1 << 21) /* Bit 21: Data available in Rx FIFO interrupt enable */
#define SDIO_MASK_SDIOITIE (1 << 22) /* Bit 22: SDIO mode interrupt received interrupt enable */
#define SDIO_MASK_CEATAENDIE (1 << 23) /* Bit 23: CE-ATA command completion interrupt enable */
#define SDIO_MASK_RESET (0)
#define SDIO_FIFOCNT_SHIFT (0)
#define SDIO_FIFOCNT_MASK (0x01ffffff << SDIO_FIFOCNT_SHIFT)
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_STM32_STM32_SDIO_H */
|
