blob: 5e23204f040e843df834e8b3f542f1617583bee3 (
plain) (
tree)
|
|
/************************************************************************************
* arch/arm/src/str71x/str71x_pcu.h
*
* Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STR71X_STR71X_PCU_H
#define __ARCH_ARM_SRC_STR71X_STR71X_PCU_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "str71x_map.h"
/************************************************************************************
* Pre-procesor Definitions
************************************************************************************/
/* Power Control Unit (PCU) register offsets ****************************************/
#define STR71X_PCU_MDIVR_OFFSET (0x0000) /* 16-bits wide */
#define STR71X_PCU_PDIVR_OFFSET (0x0004) /* 16-bits wide */
#define STR71X_PCU_RSTR_OFFSET (0x0008) /* 16-bits wide */
#define STR71X_PCU_PLL2CR_OFFSET (0x000c) /* 16-bits wide */
#define STR71X_PCU_BOOTCR_OFFSET (0x0010) /* 16-bits wide */
#define STR71X_PCU_PWRCR_OFFSET (0x0014) /* 16-bits wide */
/* Power Control Unit (PCU) register addresses **************************************/
#define STR71X_PCU_MDIVR (STR71X_PCU_BASE + STR71X_PCU_MDIVR_OFFSET)
#define STR71X_PCU_PDIVR (STR71X_PCU_BASE + STR71X_PCU_PDIVR_OFFSET)
#define STR71X_PCU_RSTR (STR71X_PCU_BASE + STR71X_PCU_RSTR_OFFSET)
#define STR71X_PCU_PLL2CR (STR71X_PCU_BASE + STR71X_PCU_PLL2CR_OFFSET)
#define STR71X_PCU_BOOTCR (STR71X_PCU_BASE + STR71X_PCU_BOOTCR_OFFSET)
#define STR71X_PCU_PWRCR (STR71X_PCU_BASE + STR71X_PCU_PWRCR_OFFSET)
/* Register bit settings ************************************************************/
/* PCU MDIVR register bit definitions */
#define STR71X_PCUMDIVR_FACTMASK (0x0003) /* Bits 0-1: Division factor for main system clock */
#define STR71X_PCUMDIVR_DIV1 (0x0000) /* MCLK = RCLK */
#define STR71X_PCUMDIVR_DIV2 (0x0001) /* MCLK = RCLK / 2 */
#define STR71X_PCUMDIVR_DIV4 (0x0002) /* MCLK = RCLK / 4 */
#define STR71X_PCUMDIVR_DIV8 (0x0003) /* MCLK = RCLK / 8 */
/* PCU PDIVR register bit definitions */
#define STR71X_PCUPDIVR_FACT1MASK (0x0003) /* Bits 0-1: Division factor for APB1 peripherals */
#define STR71X_PCUPDIVR_APB1DIV1 (0x0000) /* PCLK1 = RCLK */
#define STR71X_PCUPDIVR_APB1DIV2 (0x0001) /* PCLK1 = RCLK / 2 */
#define STR71X_PCUPDIVR_APB1DIV4 (0x0002) /* PCLK1 = RCLK / 4 */
#define STR71X_PCUPDIVR_APB1DIV8 (0x0003) /* PCLK1 = RCLK / 8 */
#define STR71X_PCUPDIVR_FACT2MASK (0x0300) /* Bits 8-9: Division factor for APB2 peripherals */
#define STR71X_PCUPDIVR_APB2DIV1 (0x0000) /* PCLK2 = RCLK */
#define STR71X_PCUPDIVR_APB2DIV2 (0x0100) /* PCLK2 = RCLK / 2 */
#define STR71X_PCUPDIVR_APB2DIV4 (0x0200) /* PCLK2 = RCLK / 4 */
#define STR71X_PCUPDIVR_APB2DIV8 (0x0300) /* PCLK2 = RCLK / 8 */
/* PCU RSTR register bit definitions */
#define STR71X_PCURSTR_EMIRESET (0x0004) /* Bit 2: EMI reset */
/* PCU PLL2CR register bit definitions */
#define STR71X_PCUPPL2CR_DXMASK (0x0007) /* Bits 0-2: PLL2 output clock divider */
#define STR71X_PCUPPL2CR_DIV1 (0x0000) /* PLL2 / 1 */
#define STR71X_PCUPPL2CR_DIV2 (0x0001) /* PLL2 / 2 */
#define STR71X_PCUPPL2CR_DIV3 (0x0002) /* PLL2 / 3 */
#define STR71X_PCUPPL2CR_DIV4 (0x0003) /* PLL2 / 4 */
#define STR71X_PCUPPL2CR_DIV5 (0x0004) /* PLL2 / 5 */
#define STR71X_PCUPPL2CR_DIV6 (0x0005) /* PLL2 / 6 */
#define STR71X_PCUPPL2CR_DIV7 (0x0006) /* PLL2 / 7 */
#define STR71X_PCUPPL2CR_OFF (0x0007) /* PLL2 OFF */
#define STR71X_PCUPPL2CR_MXMASK (0x0030) /* Bits 4-5: PLL2 multiplier */
#define STR71X_PCUPPL2CR_MUL20 (0x0000) /* CLK2 * 20 */
#define STR71X_PCUPPL2CR_MUL12 (0x0010) /* CLK2 * 12 */
#define STR71X_PCUPPL2CR_MUL28 (0x0020) /* CLK2 * 28 */
#define STR71X_PCUPPL2CR_MUL16 (0x0030) /* CLK2 * 16 */
#define STR71X_PCUPPL2CR_FRQRNG (0x0040) /* Bit 6: PLL2 frequency range selection */
#define STR71X_PCUPPL2CR_PLLEN (0x0080) /* Bit 7: PLL2 enable */
#define STR71X_PCUPPL2CR_USBEN (0x0100) /* Bit 8: Enable PLL clock to USB */
#define STR71X_PCUPPL2CR_IRQMASK (0x0200) /* Bit 9: Enable interrupt request CPU on lock transition */
#define STR71X_PCUPPL2CR_IRQPEND (0x0400) /* Bit 10: Interrtup request to CPU on lock transition pending */
#define STR71X_PCUPPL2CR_LOCK (0x8000) /* Bit 15: PLL2 locked */
/* PCU BOOTCR register bit definitions */
#define STR71X_PCUBOOTCR_BOOTMASK (0x0003) /* Bits 0-1: Boot mode */
#define STR71X_PCUBOOTCR_BMFLASH (0x0000) /* FLASH */
#define STR71X_PCUBOOTCR_BMRAM (0x0002) /* RAM */
#define STR71X_PCUBOOTCR_BMEXTMEM (0x0003) /* FLASH */
#define STR71X_PCUBOOTCR_BSPIOEN (0x0004) /* Bit 2: Enable BSPI0 */
#define STR71X_PCUBOOTCR_USBFILTEN (0x0008) /* Bit 3: Enable USB standby filtering */
#define STR71X_PCUBOOTCR_LPOWDBGEN (0x0010) /* Bit 4: Enable reserved features for STOP mode */
#define STR71X_PCUBOOTCR_ACDEN (0x0020) /* Bit 5: Enable ADC */
#define STR71X_PCUBOOTCR_CANACTIVE (0x0040) /* Bit 6: CAN active */
#define STR71X_PCUBOOTCR_HDLCACTIVE (0x0080) /* Bit 7: HDLC active */
#define STR71X_PCUBOOTCR_PKG64 (0x0200) /* Bit 9: Die is hosted in 64-pin package */
/* PCU PWRCR register bit definitions */
#define STR71X_PCUPWRCR_VRBYP (0x0008) /* Bit 3: Main regulator bypass */
#define STR71X_PCUPWRCR_LPRWFI (0x0010) /* Bit 4: Low power regulator in wait-for-interrupt mode */
#define STR71X_PCUPWRCR_LPRBYP (0x0020) /* Bit 5: Low power regulator bypass */
#define STR71X_PCUPWRCR_PWRDWN (0x0040) /* Bit 6: Activate standby mode */
#define STR71X_PCUPWRCR_OSCBYP (0x0080) /* Bit 7: 32KHz oscillator bypass */
#define STR71X_PCUPWRCR_LVDDIS (0x0100) /* Bit 8: Low voltage detector disable */
#define STR71X_PCUPWRCR_FLASHLP (0x0200) /* Bit 9: FLASH low speed (low power) select */
#define STR71X_PCUPWRCR_VROK (0x1000) /* Bit 12: Voltage regulator OK */
#define STR71X_PCUPWRCR_WKUPALRM (0x2000) /* Bit 13: Wakeup or alarm active */
#define STR71X_PCUPWRCR_BUSY (0x4000) /* Bit 14: PCU register backup logic busy */
#define STR71X_PCUPWRCR_WREN (0x8000) /* Bit 15: PCU register write enable */
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_STR71X_STR71X_PCU_H */
|
