/****************************************************************************
* arch/avr/src/at32uc3/at32uc3_timerisr.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "at32uc3_internal.h"
#include "at32uc3_pm.h"
#include "at32uc3_rtc.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* The desired timer interrupt frequency is normally provided by the
* definition CLK_TCK (see include/time.h). CLK_TCK defines the desired
* number of system clock ticks per second. That value is a user configurable
* setting that defaults to 100 (100 ticks per second = 10 MS interval).
*
* However, the AVR RTC does not support that default value well and so, we
* will insist that default is over-ridden by CONFIG_TICKS_PER_MSEC in the
* configuration file. Further, we will insist that CONFIG_TICKS_PER_MSEC
* have the value 8 (see reasoning below).
*/
#if defined(CONFIG_MSEC_PER_TICK) && CONFIG_MSEC_PER_TICK != 10
# error "Only a 100KHz system clock is supported"
#endif
/* The frequency of the RTC is given by:
*
* fRTC = fINPUT / 2**(PSEL + 1)
*
* Using the 32KHz (actually 32786Hz) clock, various RTC counting can
* be obtained:
*
* fRTC = 32768 / 2**16 = 32768/65536 = 0.5Hz -> 2000 ms per tick
* fRTC = 32768 / 2**15 = 32768/32768 = 1.0Hz -> 1000 ms per tick
* fRTC = 32768 / 2**14 = 32768/16384 = 2.0Hz -> 500 ms per tick
* fRTC = 32768 / 2**13 = 32768/8192 = 4.0Hz -> 250 ms per tick
* fRTC = 32768 / 2**12 = 32768/4096 = 8.0Hz -> 125 ms per tick
* fRTC = 32768 / 2**11 = 32768/2048 = 16.0Hz -> 62.5 ms per tick
* fRTC = 32768 / 2**10 = 32768/1024 = 32.0Hz -> 31.25 ms per tick
* fRTC = 32768 / 2**9 = 32768/512 = 64.0Hz -> 15.63 ms per tick
* fRTC = 32768 / 2**8 = 32768/256 = 125Hz -> 7.81 ms per tick
* fRTC = 32768 / 2**7 = 32768/128 = 250Hz -> 3.91 ms per tick
* fRTC = 32768 / 2**6 = 32768/64 = 500Hz -> 1.95 ms per tick
* fRTC = 32768 / 2**5 = 32768/32 = 1KHz -> 0.98 ms per tick
* fRTC = 32768 / 2**4 = 32768/16 = 2KHz -> 488.28 us per tick
* fRTC = 32768 / 2**3 = 32768/8 = 4KHz -> 244.14 us per tick
* fRTC = 32768 / 2**2 = 32768/4 = 8KHz -> 122.07 us per tick
* fRTC = 32768 / 2 = 16KHz -> 61.03 us per tick
*
* We'll use PSEL == 1 (fRTC == 122.07us) and we will set TOP to 81.
* Therefore, the TOP interrupt should occur after 81+1=82 counts
* at a rate of 122.07us x 82 = 10.01 ms
*
* Using the RCOSC at a nominal 115KHz, we can do he following:
*
* fRTC = 115000 / 2**16 = 115000/65536 = 1.754Hz -> 569.9 ms per tick
* fRTC = 115000 / 2**15 = 115000/32768 = 3.509Hz -> 284.9 ms per tick
* fRTC = 115000 / 2**14 = 115000/16384 = 7.019Hz -> 142.47 ms per tick
* fRTC = 115000 / 2**13 = 115000/8192 = 14.04Hz -> 71.23 ms per tick
* fRTC = 115000 / 2**12 = 115000/4096 = 28.08Hz -> 35.62 ms per tick
* fRTC = 115000 / 2**11 = 115000/2048 = 56.15Hz -> 17.81 ms per tick
* fRTC = 115000 / 2**10 = 115000/1024 = 112.3Hz -> 8.904 ms per tick
* fRTC = 115000 / 2**9 = 115000/512 = 224.6Hz -> 4.452 ms per tick
* fRTC = 115000 / 2**8 = 115000/256 = 449.2Hz -> 2.227 ms per tick
* fRTC = 115000 / 2**7 = 115000/128 = 898.4Hz -> 1.113 ms per tick
* fRTC = 115000 / 2**6 = 115000/64 = 1.796KHz -> 556.5 us per tick
* fRTC = 115000 / 2**5 = 115000/32 = 3.594KHz -> 278.3 us per tick
* fRTC = 115000 / 2**4 = 115000/16 = 7.188KHz -> 139.1 us per tick
* fRTC = 115000 / 2**3 = 115000/8 = 14.38KHz -> 69.57 us per tick
* fRTC = 115000 / 2**2 = 115000/4 = 28.75KHz -> 34.78 us per tick
* fRTC = 115000 / 2 = 57.50KHz -> 17l.39 us per tick
*
* We'll use PSEL == 3 (fRTC == 69.57ns) and we will set TOP to 79.
* Therefore, the TOP interrupt should occur after 143+1=144 counts
* at a rate of 69.57us x 144 = 10.02 ms
*/
#ifdef AVR32_CLOCK_OSC32
# define AV32_PSEL 1
# define AV32_TOP (82-1)
#else
# define AV32_PSEL 3
# define AV32_TOP (144-1)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: rtc_busy
*
* Description:
* Make sure that the RTC is no busy before trying to operate on it. If
* the RTC is busy, it will discard writes to TOP, VAL, and CTRL.
*
****************************************************************************/
static void rtc_waitnotbusy(void)
{
while ((getreg32(AVR32_RTC_CTRL) & RTC_CTRL_BUSY) != 0);
}
/****************************************************************************
* Global Functions
****************************************************************************/
/****************************************************************************
* Function: up_timerisr
*
* Description:
* The timer ISR will perform a variety of services for various portions
* of the systems.
*
****************************************************************************/
int up_timerisr(int irq, uint32_t *regs)
{
/* Clear the pending timer interrupt */
putreg32(RTC_INT_TOPI, AVR32_RTC_ICR);
/* Process timer interrupt */
sched_process_timer();
return 0;
}
/****************************************************************************
* Function: up_timerinit
*
* Description:
* This function is called during start-up to initialize the timer
* interrupt. NOTE: This function depends on setup of OSC32 by
* up_clkinitialize().
*
****************************************************************************/
void up_timerinit(void)
{
uint32_t regval;
/* Enable clocking: "The clock for the RTC bus interface (CLK_RTC) is generated
* by the Power Manager. This clock is enabled at reset, and can be disabled
* in the Power Manager. It is recommended to disable the RTC before disabling
* the clock, to avoid freezing the RTC in an undefined state."
*/
#if 0
regval = getreg32(AVR32_PM_PBAMASK);
regval |= PM_PBAMASK_PMRTCEIC;
putreg32(regval, AVR32_PM_PBAMASK);
#endif
/* Configure the RTC. Source == 32KHz OSC32 */
rtc_waitnotbusy();
#ifdef AVR32_CLOCK_OSC32
putreg32((RTC_CTRL_CLK32 | (AV32_PSEL << RTC_CTRL_PSEL_SHIFT) | RTC_CTRL_CLKEN),
AVR32_RTC_CTRL);
#else
putreg32(((AV32_PSEL << RTC_CTRL_PSEL_SHIFT) | RTC_CTRL_CLKEN),
AVR32_RTC_CTRL);
#endif
/* Set the counter value to zero and the TOP value to AVR32_TOP (see above) */
rtc_waitnotbusy();
putreg32(0, AVR32_RTC_VAL);
putreg32(AV32_TOP, AVR32_RTC_TOP);
/* Attach the timer interrupt vector */
(void)irq_attach(AVR32_IRQ_RTC, (xcpt_t)up_timerisr);
/* Enable RTC interrupts */
putreg32(RTC_INT_TOPI, AVR32_RTC_IER);
/* Enable the RTC */
rtc_waitnotbusy();
regval = getreg32(AVR32_RTC_CTRL);
regval |= RTC_CTRL_EN;
putreg32(regval, AVR32_RTC_CTRL);
}