/************************************************************************************
* arch/mips/src/pic32mx/pic32mx-internal.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include "up_internal.h"
#include "chip.h"
#include "pic32mx-config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
typedef FAR void *DMA_HANDLE;
typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result);
/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
#ifdef CONFIG_DEBUG_DMA
struct pic32mx_dmaglobalregs_s
{
/* Global Registers */
#warning "Missing definitions"
};
struct pic32mx_dmachanregs_s
{
/* Channel Registers */
#warning "Missing definitions"
};
struct pic32mx_dmaregs_s
{
/* Global Registers */
struct pic32mx_dmaglobalregs_s gbl;
/* Channel Registers */
struct pic32mx_dmachanregs_s ch;
};
#endif
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: pic32mx_lowinit
*
* Description:
* This performs basic low-level initialization of the system.
*
************************************************************************************/
EXTERN void pic32mx_lowinit(void);
/************************************************************************************
* Name: pic32mx_lowsetup
*
* Description:
* Performs low level initialization of the console UART. This UART done early so
* that the serial console is available for debugging very early in the boot
* sequence.
*
************************************************************************************/
EXTERN void pic32mx_consoleinit(void);
/******************************************************************************
* Name: pic32mx_uartreset
*
* Description:
* Reset a UART.
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
EXTERN void pic32mx_uartreset(uintptr_t uart_base);
#endif
/******************************************************************************
* Name: pic32mx_uartconfigure
*
* Description:
* Configure a UART as a RS-232 UART.
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
EXTERN void pic32mx_uartconfigure(uintptr_t uart_base, uint32_t baudrate,
unsigned int parity, unsigned int nbits,
bool stop2);
#endif
/************************************************************************************
* Name: pic32mx_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the directory
* configs/<board-name>/up_boot.c.
*
************************************************************************************/
EXTERN void pic32mx_boardinitialize(void);
/************************************************************************************
* Name: pic32mx_decodeirq
*
* Description:
* Called from assembly language logic when an interrrupt exception occurs. This
* function decodes and dispatches the interrupt.
*
************************************************************************************/
EXTERN uint32_t *pic32mx_decodeirq(uint32_t *regs);
/************************************************************************************
* Name: pic32mx_dobev
*
* Description:
* Called from assembly language logic on all other exceptions.
*
************************************************************************************/
EXTERN uint32_t *pic32mx_dobev(uint32_t *regs);
/************************************************************************************
* Name: pic32mx_spiNselect, pic32mx_spiNstatus, and pic32mx_spiNcmddata
*
* Description:
* These external functions must be provided by board-specific logic. They are
* implementations of the select, status, and cmddata methods of the SPI interface
* defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods
* including up_spiinitialize()) are provided by common PIC32MX logic. To use
* this common SPI logic on your board:
*
* 1. Provide logic in pic32mx_boardinitialize() to configure SPI/SSP chip select
* pins.
* 2. Provide pic32mx_spiNselect() and pic32mx_spiNstatus() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* pic32mx_spiNcmddata() functions in your board-specific logic. These
* functions will perform cmd/data selection operations using GPIOs in the way
* your board is configured.
* 3. Add a call to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
struct spi_dev_s;
enum spi_dev_e;
#ifdef CONFIG_PIC32MX_SPI1
EXTERN void pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
EXTERN int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_PIC32MX_SPI2
EXTERN void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
EXTERN int pic32mx_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
/****************************************************************************
* Name: pic32mx_spiflush
*
* Description:
* Flush and discard any words left in the RX fifo. This can be called
* from ssp0/1select after a device is deselected (if you worry about such
* things).
*
* Input Parameters:
* dev - Device-specific state data
*
* Returned Value:
* None
*
****************************************************************************/
struct spi_dev_s;
#if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
EXTERN void pic32mx_spiflush(FAR struct spi_dev_s *dev);
#endif
/****************************************************************************
* Name: pic32mx_dmainitialize
*
* Description:
* Initialize the GPDMA subsystem.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN void pic32mx_dmainitilaize(void);
#endif
/****************************************************************************
* Name: pic32mx_dmachannel
*
* Description:
* Allocate a DMA channel. This function sets aside a DMA channel and
* gives the caller exclusive access to the DMA channel.
*
* Returned Value:
* One success, this function returns a non-NULL, void* DMA channel
* handle. NULL is returned on any failure. This function can fail only
* if no DMA channel is available.
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN DMA_HANDLE pic32mx_dmachannel(void);
#endif
/****************************************************************************
* Name: pic32mx_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must
* NEVER be used again until pic32mx_dmachannel() is called again to re-gain
* a valid handle.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN void pic32mx_dmafree(DMA_HANDLE handle);
#endif
/****************************************************************************
* Name: pic32mx_dmasetup
*
* Description:
* Configure DMA for one transfer.
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN int pic32mx_dmarxsetup(DMA_HANDLE handle,
uint32_t control, uint32_t config,
uint32_t srcaddr, uint32_t destaddr,
size_t nbytes);
#endif
/****************************************************************************
* Name: pic32mx_dmastart
*
* Description:
* Start the DMA transfer
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN int pic32mx_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
#endif
/****************************************************************************
* Name: pic32mx_dmastop
*
* Description:
* Cancel the DMA. After pic32mx_dmastop() is called, the DMA channel is
* reset and pic32mx_dmasetup() must be called before pic32mx_dmastart() can be
* called again
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
EXTERN void pic32mx_dmastop(DMA_HANDLE handle);
#endif
/****************************************************************************
* Name: pic32mx_dmasample
*
* Description:
* Sample DMA register contents
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
#ifdef CONFIG_DEBUG_DMA
EXTERN void pic32mx_dmasample(DMA_HANDLE handle, struct pic32mx_dmaregs_s *regs);
#else
# define pic32mx_dmasample(handle,regs)
#endif
#endif
/****************************************************************************
* Name: pic32mx_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
****************************************************************************/
#ifdef CONFIG_pic32mx_GPDMA
#ifdef CONFIG_DEBUG_DMA
EXTERN void pic32mx_dmadump(DMA_HANDLE handle, const struct pic32mx_dmaregs_s *regs,
const char *msg);
#else
# define pic32mx_dmadump(handle,regs,msg)
#endif
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H */