/******************************************************************************
* arch/mips/src/pic32mx/pic32mx-lowconsole.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
/******************************************************************************
* Included Files
******************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <debug.h>
#include <arch/irq.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "pic32mx-config.h"
#include "pic32mx-internal.h"
/******************************************************************************
* Private Definitions
******************************************************************************/
/* Select UART parameters for the selected console */
#if defined(CONFIG_UART1_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART1_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART1_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART1_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART1_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART1_2STOP
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART2_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART2_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART2_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART2_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART2_2STOP
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART3_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART3_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART3_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART3_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART3_2STOP
#elif defined(CONFIG_UART4_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART4_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART4_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART4_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART4_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART4_2STOP
#elif defined(CONFIG_UART5_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART5_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART5_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART5_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART5_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART5_2STOP
#elif defined(CONFIG_UART6_SERIAL_CONSOLE)
# define PIC32MX_CONSOLE_BASE PIC32MX_UART6_K1BASE
# define PIC32MX_CONSOLE_BAUD CONFIG_UART6_BAUD
# define PIC32MX_CONSOLE_BITS CONFIG_UART6_BITS
# define PIC32MX_CONSOLE_PARITY CONFIG_UART6_PARITY
# define PIC32MX_CONSOLE_2STOP CONFIG_UART6_2STOP
#else
# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting"
#endif
/******************************************************************************
* Private Types
******************************************************************************/
/******************************************************************************
* Private Function Prototypes
******************************************************************************/
/******************************************************************************
* Global Variables
******************************************************************************/
/******************************************************************************
* Private Variables
******************************************************************************/
/******************************************************************************
* Private Functions
******************************************************************************/
/******************************************************************************
* Name: pic32mx_putreg
*
* Description:
* Write a value to a UART register
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
static inline void pic32mx_putreg(uintptr_t uart_base, unsigned int offset,
uint32_t value)
{
putreg32(value, uart_base + offset);
}
#endif
/******************************************************************************
* Name: pic32mx_getreg
*
* Description:
* Get a value from a UART register
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
unsigned int offset)
{
return getreg32(uart_base + offset);
}
#endif
/******************************************************************************
* Name: pic32mx_uartsetbaud
*
* Description:
* Configure the UART baud rate.
*
* With BRGH=0
* BAUD = PBCLK / 16 / (BRG+1)
* BRG = PBCLK / 16 / BAUD - 1
* With BRGH=1
* BAUD = PBCLK / 4 / (BRG+1)
* BRG = PBCLK / 4 / BAUD - 1
*
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
static void pic32mx_uartsetbaud(uintptr_t uart_base, uint32_t baudrate)
{
uint32_t tmp;
uint32_t brg;
unsigned int mode;
/* We want the largest value of BRG divisor possible (for the best accuracy).
* Subject to BRG <= 65536.
*/
tmp = BOARD_PBCLOCK / baudrate;
/* Try BRGH=1 first. This will select the 4x divisor and will produce the
* larger BRG divisor, given all other things equal.
*/
brg = (tmp + 2) >> 2;
mode = PIC32MX_UART_MODESET_OFFSET;
if (brg > 65536)
{
/* Nope, too big.. try BRGH=1 */
brg = (tmp + 8) >> 4;
mode = PIC32MX_UART_MODECLR_OFFSET;
}
DEBUGASSERT(brg <= 65536);
/* Set the BRG divisor */
pic32mx_putreg(uart_base, mode, UART_MODE_BRGH);
pic32mx_putreg(uart_base, PIC32MX_UART_BRG_OFFSET, brg);
}
#endif
/******************************************************************************
* Public Functions
******************************************************************************/
/******************************************************************************
* Name: pic32mx_uartreset
*
* Description:
* Reset hardware and disable Rx and Tx.
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
void pic32mx_uartreset(uintptr_t uart_base)
{
/* Doesn't reset the hardware... just shuts it down */
pic32mx_putreg(uart_base, PIC32MX_UART_STACLR_OFFSET,
UART_STA_UTXEN | UART_STA_URXEN);
pic32mx_putreg(uart_base, PIC32MX_UART_MODECLR_OFFSET, UART_MODE_ON);
}
#endif
/******************************************************************************
* Name: pic32mx_uartconfigure
*
* Description:
* Configure a UART as a RS-232 UART.
*
******************************************************************************/
#ifdef HAVE_UART_DEVICE
void pic32mx_uartconfigure(uintptr_t uart_base, uint32_t baudrate,
unsigned int parity, unsigned int nbits, bool stop2)
{
/* Clear mode and sta bits */
pic32mx_putreg(uart_base, PIC32MX_UART_MODECLR_OFFSET,
UART_MODE_STSEL | UART_MODE_PDSEL_MASK | UART_MODE_BRGH |
UART_MODE_RXINV | UART_MODE_WAKE | UART_MODE_LPBACK |
UART_MODE_UEN_MASK | UART_MODE_RTSMD | UART_MODE_IREN |
UART_MODE_SIDL | UART_MODE_ON);
/* Configure the FIFOs:
*
* RX: Interrupt at 6 of 8 (for 8-deep FIFO) or 3 o 4 (4-deep FIFO)
* TX: Interrupt on FIFO not full
* Invert transmit polarity.
*/
#ifdef UART_STA_URXISEL_RXB6
pic32mx_putreg(uart_base, PIC32MX_UART_STACLR_OFFSET,
UART_STA_UTXINV | UART_STA_UTXISEL_TXBNF | UART_STA_URXISEL_RXB6);
#else
pic32mx_putreg(uart_base, PIC32MX_UART_STACLR_OFFSET,
UART_STA_UTXINV | UART_STA_UTXISEL_TXBNF | UART_STA_URXISEL_RXB3);
#endif
/* Configure the FIFO interrupts */
pic32mx_putreg(uart_base, PIC32MX_UART_STASET_OFFSET,
UART_STA_UTXISEL_TXBNF | UART_STA_URXISEL_RECVD);
/* Configure word size and parity */
if (nbits == 9)
{
DEBUGASSERT(parity == 0);
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_MODE_PDSEL_9NONE);
}
else
{
DEBUGASSERT(nbits == 8);
if (parity == 1)
{
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_MODE_PDSEL_8ODD);
}
else if (parity == 2)
{
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_MODE_PDSEL_8EVEN);
}
}
/* Configure 1 or 2 stop bits */
if (stop2)
{
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_MODE_STSEL);
}
/* Set the BRG divisor */
pic32mx_uartsetbaud(uart_base, baudrate);
/* Enable the UART */
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_STA_UTXEN | UART_STA_URXEN);
pic32mx_putreg(uart_base, PIC32MX_UART_MODESET_OFFSET,
UART_MODE_ON);
}
#endif
/******************************************************************************
* Name: pic32mx_consoleinit
*
* Description:
* Initialize a console for debug output. This function is called very
* early in the intialization sequence to configure the serial console uart
* (only).
*
******************************************************************************/
void pic32mx_consoleinit(void)
{
#ifdef HAVE_UART_DEVICE
pic32mx_uartconfigure(PIC32MX_CONSOLE_BASE, PIC32MX_CONSOLE_BAUD,
PIC32MX_CONSOLE_PARITY, PIC32MX_CONSOLE_BITS,
PIC32MX_CONSOLE_2STOP);
#endif
}
/******************************************************************************
* Name: up_lowputc
*
* Description:
* Output one byte on the serial console
*
******************************************************************************/
void up_lowputc(char ch)
{
/* Wait for the transmit buffer not full */
while ((pic32mx_getreg(PIC32MX_CONSOLE_BASE, PIC32MX_UART_STA_OFFSET) & UART_STA_UTXBF) != 0);
/* Then write the character to the TX data register */
pic32mx_putreg(PIC32MX_CONSOLE_BASE, PIC32MX_UART_TXREG_OFFSET, (uint32_t)ch);
}