|
|
/****************************************************************************
* arch/sh/src/sh1/sh1_irq.c
*
* Copyright (C) 2008-2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include "up_arch.h"
#include "up_internal.h"
#include "chip.h"
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
volatile uint32_t *current_regs;
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Funtions
****************************************************************************/
/****************************************************************************
* Name: up_irqinitialize
****************************************************************************/
void up_irqinitialize(void)
{
/* Currents_regs is non-NULL only while processing an interrupt */
current_regs = NULL;
/* Enable interrupts */
#ifndef CONFIG_SUPPRESS_INTERRUPTS
irqenable();
#endif
}
/****************************************************************************
* Name: up_prioritize_irq
*
* Description:
* set interrupt priority
*
****************************************************************************/
void up_prioritize_irq(int irq, int priority)
{
uint16_t mask;
uint16_t reg16;
uint32_t reg;
int shift;
#ifdef CONFIG_DEBUG
if ((unsigned) irq > NR_IRQS || (unsigned)priority > 15)
{
dbg("Invalid parameters\n");
return;
}
#endif
/* Get the register to set, the mask for the bits to be set, and
* the shift value to position the bits in the register.
*/
switch (irq)
{
#if 0 /* Not yet supported */
case SH1_IRQ0_IRQ:
mask = SH1_IPRA_IRQ0MASK;
shift = SH1_IPRA_IRQ0SHIFT;
goto ipra;
case SH1_IRQ1_IRQ:
mask = SH1_IPRA_IRQ1MASK;
shift = SH1_IPRA_IRQ1SHIFT;
goto ipra;
case SH1_IRQ2_IRQ:
mask = SH1_IPRA_IRQ2MASK;
shift = SH1_IPRA_IRQ2SHIFT;
goto ipra;
case SH1_IRQ3_IRQ:
mask = SH1_IPRA_IRQ3MASK;
shift = SH1_IPRA_IRQ3SHIFT;
goto ipra;
ipra:
reg = SH1_INTC_IPRA;
break;
case SH1_IRQ4_IRQ:
mask = SH1_IPRB_IRQ4MASK;
shift = SH1_IPRB_IRQ4SHIFT;
goto iprb;
case SH1_IRQ5_IRQ:
mask = SH1_IPRB_IRQ5MASK;
shift = SH1_IPRB_IRQ5SHIFT;
goto iprb;
case SH1_IRQ6_IRQ:
mask = SH1_IPRB_IRQ6MASK;
shift = SH1_IPRB_IRQ6SHIFT;
goto iprb;
case SH1_IRQ7_IRQ:
mask = SH1_IPRB_IRQ7MASK;
shift = SH1_IPRB_IRQ7SHIFT;
goto iprb;
iprb:
reg = SH1_INTC_IPRB;
break;
#endif
#if defined(CONFIG_SH1_DMAC0) || defined(CONFIG_SH1_DMAC1)
case SH1_DEI0_IRQ:
case SH1_DEI1_IRQ:
mask = SH1_IPRC_DM01MASK;
shift = SH1_IPRC_DM01SHIFT;
goto iprc;
#endif
#if defined(CONFIG_SH1_DMAC2) || defined(CONFIG_SH1_DMAC3)
case SH1_DEI2_IRQ:
case SH1_DEI3_IRQ:
mask = SH1_IPRC_DM23MASK;
shift = SH1_IPRC_DM23SHIFT;
goto iprc;
#endif
#ifdef CONFIG_SH1_ITU1
case SH1_IMIA1_IRQ:
case SH1_IMIB1_IRQ:
case SH1_OVI1_IRQ:
mask = SH1_IPRC_ITU1MASK;
shift = SH1_IPRC_ITU1SHIFT;
goto iprc;
#endif
case SH1_IMIA0_IRQ:
case SH1_IMIB0_IRQ:
case SH1_OVI0_IRQ:
mask = SH1_IPRC_ITU0MASK;
shift = SH1_IPRC_ITU0SHIFT;
goto iprc;
iprc:
reg = SH1_INTC_IPRC;
break;
#if defined(CONFIG_SH1_ITU2) || defined(CONFIG_SH1_ITU3) || \
defined(CONFIG_SH1_ITU4) || defined(CONFIG_SH1_SCI0)
#ifdef CONFIG_SH1_ITU2
case SH1_IMIA2_IRQ:
case SH1_IMIB2_IRQ:
case SH1_OVI2_IRQ:
mask = SH1_IPRD_ITU2MASK;
shift = SH1_IPRD_ITU2SHIFT;
goto iprd;
#endif
#ifdef CONFIG_SH1_ITU3
case SH1_IMIA3_IRQ:
case SH1_IMIB3_IRQ:
case SH1_OVI3_IRQ:
mask = SH1_IPRD_ITU3MASK;
shift = SH1_IPRD_ITU3SHIFT;
goto iprd;
#endif
#ifdef CONFIG_SH1_ITU4
case SH1_IMIA4_IRQ:
case SH1_IMIB4_IRQ:
case SH1_OVI4_IRQ:
mask = SH1_IPRD_ITU4MASK;
shift = SH1_IPRD_ITU4SHIFT;
goto iprd;
#endif
#ifdef CONFIG_SH1_SCI0
case SH1_ERI0_IRQ:
case SH1_RXI0_IRQ:
case SH1_TXI0_IRQ:
case SH1_TEI0_IRQ:
mask = SH1_IPRD_SCI0MASK;
shift = SH1_IPRD_SCI0SHIFT;
goto iprd;
#endif
iprd:
reg = SH1_INTC_IPRD;
break;
#endif
#if defined(CONFIG_SH1_SCI1) || defined(CONFIG_SH1_PCU) || \
defined(CONFIG_SH1_AD) || defined(CONFIG_SH1_WDT) || defined(CONFIG_SH1_CMI)
#ifdef CONFIG_SH1_SCI1
case SH1_ERI1_IRQ:
case SH1_RXI1_IRQ:
case SH1_TXI1_IRQ:
case SH1_TEI1_IRQ:
mask = SH1_IPRE_SCI1MASK;
shift = SH1_IPRE_SCI1SHIFT;
goto ipre;
#endif
#if defined(CONFIG_SH1_PCU) || defined(CONFIG_SH1_AD)
case SH1_PEI_IRQ:
case SH1_ADITI_IRQ:
mask = SH1_IPRE_PRADMASK;
shift = SH1_IPRE_PRADSHIFT;
goto ipre;
#endif
#if defined(CONFIG_SH1_WDT) || defined(CONFIG_SH1_CMI)
case SH1_WDTITI_IRQ:
case SH1_CMI_IRQ:
mask = SH1_IPRE_WDRFMASK;
shift = SH1_IPRE_WDRFSHIFT;
goto ipre;
#endif
ipre:
reg = SH1_INTC_IPRE;
break;
#endif
default:
dbg("Invalid irq=%d\n", irq);
return;
}
/* Then set the priority bits */
reg16 = getreg16(reg);
reg16 &= ~mask;
reg16 |= (priority << shift);
putreg16(reg16, reg);
}
|