/****************************************************************************
* arch/sim/src/up_lcd.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/lcd/lcd.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Check contrast selection */
#if !defined(CONFIG_LCD_MAXCONTRAST)
# define CONFIG_LCD_MAXCONTRAST 100
#endif
/* Check power setting */
#if !defined(CONFIG_LCD_MAXPOWER)
# define CONFIG_LCD_MAXPOWER 100
#endif
/* Simulated LCD geometry and color format */
#ifndef CONFIG_SIM_FBWIDTH
# define CONFIG_SIM_FBWIDTH 320 /* Framebuffer width in pixels */
#endif
#ifndef CONFIG_SIM_FBHEIGHT
# define CONFIG_SIM_FBHEIGHT 240 /* Framebuffer height in pixels */
#endif
#ifndef CONFIG_SIM_FBBPP
# define CONFIG_SIM_FBBPP 16 /* Framebuffer bytes per pixel (RGB) */
#endif
#define FB_STRIDE ((CONFIG_SIM_FBBPP * CONFIG_SIM_FBWIDTH + 7) >> 3)
#undef FB_FMT
#if CONFIG_SIM_FBBPP == 1
# define FB_FMT FB_FMT_RGB1
#elif CONFIG_SIM_FBBPP == 4
# define FB_FMT FB_FMT_RGB4
#elif CONFIG_SIM_FBBPP == 8
# define FB_FMT FB_FMT_RGB8
#elif CONFIG_SIM_FBBPP == 16
# define FB_FMT FB_FMT_RGB16_565
#elif CONFIG_SIM_FBBPP == 24
# define FB_FMT FB_FMT_RGB24
#elif CONFIG_SIM_FBBPP == 32
# define FB_FMT FB_FMT_RGB32
#else
# error "Unsupported BPP"
#endif
/* Debug ********************************************************************/
/* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must
* also be enabled.
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_GRAPHICS
# undef CONFIG_DEBUG_LCD
#endif
#ifndef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_LCD
#endif
#ifdef CONFIG_DEBUG_LCD
# define lcddbg(format, arg...) vdbg(format, ##arg)
#else
# define lcddbg(x...)
#endif
/****************************************************************************
* Private Type Definition
****************************************************************************/
/* This structure describes the state of this driver */
struct sim_dev_s
{
/* Publically visible device structure */
struct lcd_dev_s dev;
/* Private LCD-specific information follows */
uint8_t power; /* Current power setting */
};
/****************************************************************************
* Private Function Protototypes
****************************************************************************/
/* LCD Data Transfer Methods */
static int sim_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
size_t npixels);
static int sim_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
size_t npixels);
/* LCD Configuration */
static int sim_getvideoinfo(FAR struct lcd_dev_s *dev,
FAR struct fb_videoinfo_s *vinfo);
static int sim_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno,
FAR struct lcd_planeinfo_s *pinfo);
/* LCD RGB Mapping */
#ifdef CONFIG_FB_CMAP
# error "RGB color mapping not supported by this driver"
#endif
/* Cursor Controls */
#ifdef CONFIG_FB_HWCURSOR
# error "Cursor control not supported by this driver"
#endif
/* LCD Specific Controls */
static int sim_getpower(struct lcd_dev_s *dev);
static int sim_setpower(struct lcd_dev_s *dev, int power);
static int sim_getcontrast(struct lcd_dev_s *dev);
static int sim_setcontrast(struct lcd_dev_s *dev, unsigned int contrast);
/****************************************************************************
* Private Data
****************************************************************************/
/* This is working memory allocated by the LCD driver for each LCD device
* and for each color plane. This memory will hold one raster line of data.
* The size of the allocated run buffer must therefore be at least
* (bpp * xres / 8). Actual alignment of the buffer must conform to the
* bitwidth of the underlying pixel type.
*
* If there are multiple planes, they may share the same working buffer
* because different planes will not be operate on concurrently. However,
* if there are multiple LCD devices, they must each have unique run buffers.
*/
static uint8_t g_runbuffer[FB_STRIDE];
/* This structure describes the overall LCD video controller */
static const struct fb_videoinfo_s g_videoinfo =
{
.fmt = FB_FMT, /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */
.xres = CONFIG_SIM_FBWIDTH, /* Horizontal resolution in pixel columns */
.yres = CONFIG_SIM_FBHEIGHT, /* Vertical resolution in pixel rows */
.nplanes = 1, /* Number of color planes supported */
};
/* This is the standard, NuttX Plane information object */
static const struct lcd_planeinfo_s g_planeinfo =
{
.putrun = sim_putrun, /* Put a run into LCD memory */
.getrun = sim_getrun, /* Get a run from LCD memory */
.buffer = (uint8_t*)g_runbuffer, /* Run scratch buffer */
.bpp = CONFIG_SIM_FBBPP, /* Bits-per-pixel */
};
/* This is the standard, NuttX LCD driver object */
static struct sim_dev_s g_lcddev =
{
.dev =
{
/* LCD Configuration */
.getvideoinfo = sim_getvideoinfo,
.getplaneinfo = sim_getplaneinfo,
/* LCD RGB Mapping -- Not supported */
/* Cursor Controls -- Not supported */
/* LCD Specific Controls */
.getpower = sim_getpower,
.setpower = sim_setpower,
.getcontrast = sim_getcontrast,
.setcontrast = sim_setcontrast,
},
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sim_putrun
*
* Description:
* This method can be used to write a partial raster line to the LCD:
*
* row - Starting row to write to (range: 0 <= row < yres)
* col - Starting column to write to (range: 0 <= col <= xres-npixels)
* buffer - The buffer containing the run to be written to the LCD
* npixels - The number of pixels to write to the LCD
* (range: 0 < npixels <= xres-col)
*
****************************************************************************/
static int sim_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
size_t npixels)
{
lcddbg("row: %d col: %d npixels: %d\n", row, col, npixels);
return OK;
}
/****************************************************************************
* Name: sim_getrun
*
* Description:
* This method can be used to read a partial raster line from the LCD:
*
* row - Starting row to read from (range: 0 <= row < yres)
* col - Starting column to read read (range: 0 <= col <= xres-npixels)
* buffer - The buffer in which to return the run read from the LCD
* npixels - The number of pixels to read from the LCD
* (range: 0 < npixels <= xres-col)
*
****************************************************************************/
static int sim_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
size_t npixels)
{
lcddbg("row: %d col: %d npixels: %d\n", row, col, npixels);
return -ENOSYS;
}
/****************************************************************************
* Name: sim_getvideoinfo
*
* Description:
* Get information about the LCD video controller configuration.
*
****************************************************************************/
static int sim_getvideoinfo(FAR struct lcd_dev_s *dev,
FAR struct fb_videoinfo_s *vinfo)
{
DEBUGASSERT(dev && vinfo);
gvdbg("fmt: %d xres: %d yres: %d nplanes: %d\n",
g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes);
memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s));
return OK;
}
/****************************************************************************
* Name: sim_getplaneinfo
*
* Description:
* Get information about the configuration of each LCD color plane.
*
****************************************************************************/
static int sim_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno,
FAR struct lcd_planeinfo_s *pinfo)
{
DEBUGASSERT(dev && pinfo && planeno == 0);
gvdbg("planeno: %d bpp: %d\n", planeno, g_planeinfo.bpp);
memcpy(pinfo, &g_planeinfo, sizeof(struct lcd_planeinfo_s));
return OK;
}
/****************************************************************************
* Name: sim_getpower
*
* Description:
* Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER:
* full on). On backlit LCDs, this setting may correspond to the backlight setting.
*
****************************************************************************/
static int sim_getpower(struct lcd_dev_s *dev)
{
gvdbg("power: %d\n", 0);
return g_lcddev.power;
}
/****************************************************************************
* Name: sim_setpower
*
* Description:
* Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER:
* full on). On backlit LCDs, this setting may correspond to the backlight
* setting.
*
****************************************************************************/
static int sim_setpower(struct lcd_dev_s *dev, int power)
{
gvdbg("power: %d\n", power);
DEBUGASSERT(power <= CONFIG_LCD_MAXPOWER);
/* Set new power level */
g_lcddev.power = power;
return OK;
}
/****************************************************************************
* Name: sim_getcontrast
*
* Description:
* Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST).
*
****************************************************************************/
static int sim_getcontrast(struct lcd_dev_s *dev)
{
gvdbg("Not implemented\n");
return -ENOSYS;
}
/****************************************************************************
* Name: sim_setcontrast
*
* Description:
* Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST).
*
****************************************************************************/
static int sim_setcontrast(struct lcd_dev_s *dev, unsigned int contrast)
{
gvdbg("contrast: %d\n", contrast);
return -ENOSYS;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_lcdinitialize
*
* Description:
* Initialize the LCD video hardware. The initial state of the LCD is
* fully initialized, display memory cleared, and the LCD ready to use,
* but with the power setting at 0 (full off).
*
****************************************************************************/
int up_lcdinitialize(void)
{
gvdbg("Initializing\n");
return OK;
}
/****************************************************************************
* Name: up_lcdgetdev
*
* Description:
* Return a a reference to the LCD object for the specified LCD. This
* allows support for multiple LCD devices.
*
****************************************************************************/
FAR struct lcd_dev_s *up_lcdgetdev(int lcddev)
{
DEBUGASSERT(lcddev == 0);
return &g_lcddev.dev;
}
/****************************************************************************
* Name: up_lcduninitialize
*
* Description:
* Unitialize the LCD support
*
****************************************************************************/
void up_lcduninitialize(void)
{
}